How to create a ARD for 64 Bit And 32 Bit Systems

Dear All,
Please help me to solve my problem. I am not able to create the ARD for both type systems (32 Bit and 64 Bit Bit). My system is OS Windows 7, 32 bit operating system. Sometimes my add-ons run successfully for 32 bit , sometimes for 64 bit. I am creating 2 ARD's for each add-on but I have failed.
I have read many threads but I got no success.
Please help me.
Regards

Hi Pedro Magueija, Edy Simon,
Thanks for your reply. I follow below mentioned steps to create the ARD File. I build my add-on code as mentioned below:
Solution Configuration
Solution Platform
Project Properties/Compile/ Advanced Compile Option/ Target CPU
Add-on Registration Data Generator x64 Option
Debug
x86
x86
FALSE (Unchecked)
Debug
x86
x86
True (Checked)
I was able to create and use ARD by doing in above mentioned way. But sometimes these ARD doesn't work or doesn't get installled.
Regards

Similar Messages

HOW TO CREATE SEVERAL folder for the generation and READING FILE

HOW TO CREATE SEVERAL folder for the generation and READING FILE WITH THE COMMAND utl_File.
please give an example to create 3 folders or directories ...
I appreciate your attention ...
Reynel Martinez Salazar

I hope this link help you.
[http://www.adp-gmbh.ch/ora/sql/create_directory.html]
create or replace directory exp_dir as '/tmp';
grant read, write on directory exp_dir to eygle;
SQL> create or replace directory UTL_FILE_DIR as '/opt/oracle/utl_file';
Directory created.
SQL> declare
2    fhandle utl_file.file_type;
3 begin
4    fhandle := utl_file.fopen('UTL_FILE_DIR', 'example.txt', 'w');
5    utl_file.put_line(fhandle , 'eygle test write one');
6    utl_file.put_line(fhandle , 'eygle test write two');
7    utl_file.fclose(fhandle);
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> !
[oracle@jumper 9.2.0]$ more /opt/oracle/utl_file/example.txt
eygle test write one
eygle test write two
[oracle@jumper 9.2.0]$
SQL> declare
2    fhandle   utl_file.file_type;
3    fp_buffer varchar2(4000);
4 begin
5    fhandle := utl_file.fopen ('UTL_FILE_DIR','example.txt', 'R');
6
7    utl_file.get_line (fhandle , fp_buffer );
8    dbms_output.put_line(fp_buffer );
9    utl_file.get_line (fhandle , fp_buffer );
10    dbms_output.put_line(fp_buffer );
11    utl_file.fclose(fhandle);
12 end;
13 /
eygle test write one
eygle test write two
PL/SQL procedure successfully completed.
SQL> select * from dba_directories;
OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdump
SYS                            EXP_DIR                        /opt/oracle/utl_file
SQL> drop directory exp_dir;
Directory dropped
SQL> select * from dba_directories;
OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdumpRegards salim.
Edited by: Salim Chelabi on Apr 4, 2009 4:33 PM

How to create customer exit for characteristic variables and for text vars.

hi friends,
can anybody tell me how to create customer exit for characteristic variables and for text variables in bw ides system.
thanks,
sree

Hi,
Please have a look at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
Krzys

How to create t-code for a table and how to create transaction variant???

Hi,
I have created a custom table zsark.
Now my requirement is : I have to create a transaction variant zsark_var for sm30 and table zsark. I have to disable the output of the first screen. I have to assign the transaction variant to the transaction code of table zsark.
Now,
1.     how to create transaction code to a table. Can any one give me the
                staps??
2.     how to create transaction variant for the above requirement???
Thanks & Regards,
Sarkar

Hi
1 Goto SE93 transaction
2 Choose 5th option Transaction with parameters
3 Give transaction : SM30, Check Skip Initial Screen Press Enter
4 Goto Bottom left corner, click F4 select viewname, on right hand side give table name
5 Press one more time F4, choose update , mark it X on right side.
6 save the transaction.
Thanks
sandeep
reward if helpful

ARD for 64 bits System

Dear All,
I am having a problem in an ARD made by me. I am using a 32 bit system. But my client uses 64 bit server. My ARD is not working on his server. What can I do for making the ARD use-able for 64 bits system. I am passing command line argument for 32 bits system i.e
'0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056'
Plz help me regarding this problem.

hi,
change to project properties in 64 bit
open your code.
go to project->choose project properties->compile--->advance compile >change target cpu type->x64
and build the project.
same step following the ard solution file. and rebuild the project
thanks & regards
B.Lakshmi narayanan

How to create automatically users&roles in CUA and in chlid systems?

Hi,
i have a CUA on a 2 chlid R/3 systems (test and training) and 2 portal systems (test and training).
i need to create a web application to create automatically users test and users training in CUA and see them in the R/3 chlid systems and at the same time to create autmatically a roles in CUA and R/3 chlid systems for those users (we sppose that the role is already stored in a table).
are there any standard BAPI or Funcion modules that can do this job?
is the role created automatically in CUA can be seen automaticall in the portal child system?
any help?
Thanks&Best regards

You can use one of the various ways Java EE provides you, e.g. container managed authentication.
It's also all in the Java EE tutorial: [http://java.sun.com/javaee/5/docs/tutorial/doc/bncas.html].
You can configure it in the application server as well: [http://tomcat.apache.org/tomcat-6.0-doc/realm-howto.html].
Here is an example how to use it in JSF: [http://ocpsoft.com/java/acegi-spring-security-jsf-login-page/].

How to create logical columns for current period and prior period

Hello all.
Is there any way in obiee to create a new logica column in BMM layer that says "CURRENT PERIOD" AND "PRIOR PERIOD" OR ONE SINGLE COLUMN THAT SAYS "PERIOD".
In those columns what I need is if it a current period column it shoould have 03/01/2012-03/31/2012 (this month date range)
and in prior period column I shouldhave 02/01/2012 -02/29/2012(which is previous month date range).These columns I will be using in my reports.
Please help me if we can create any such columns with these conditions/requirements

Hi,I have already created he dynamic variables.But I am not getting how to use those variables and create the new logical columns in bmm layer.
this is what I am trying
case when VALUEOF("Current Month begin date"."Current Month begin date") ='..' and VALUEOF("Current Month end date"."Current Month end date")
='..' then 'current period' end
I don't really understand what I should write case when VALUEOF("Current Month begin date"."Current Month begin date") ='..'??

How to create stored procedure for insert update and delete operations with input output paramters?

I have the follwing table is called master table contain the follwing fields,
So here i need to create three Stored procedures
1.Insert operations(1 o/p paramter,and 14 input paramters) - uspInsert
2.Update operations(1 o/p paramter,and 14 input paramters) - uspUpdate
3.Delete Operations(1 o/p paramter,and 14 input paramters)
- uspdelte
The following is the table ,so using this to make the three sp's ,Here we will use Exception machanism also.
Location
Client Name
Owner
ConfigItemID
ConfigItemName
DeploymentID
IncidentID
Package Name
Scope
Stage
Type
Start Date
End Date
Accountable
Comments
So can u pls help me out for this ,bcz i knew to stored procedure's creation.

I have the follwing table is called master table contain the follwing fields,
So here i need to create three Stored procedures
1.Insert operations(1 o/p paramter,and 14 input paramters) - uspInsert
2.Update operations(1 o/p paramter,and 14 input paramters) - uspUpdate
3.Delete Operations(1 o/p paramter,and 14 input paramters) - uspdelte
The following is the table ,so using this to make the three sp's ,Here we will use Exception machanism also.
Location
Client Name
Owner
ConfigItemID
ConfigItemName
DeploymentID
IncidentID
Package Name
Scope
Stage
Type
Start Date
End Date
Accountable
Comments
So can u pls help me out for this ,bcz i knew to stored procedure's creation.
Why you have to pass 14 parameters for DELETE and UPDATE? Do you have any Primary Key? If you do NOT have primary key in your table then in case you have duplicate information, SQL will update both or delete them together. You need to provide DDL of
you table. What are the data types of fields?
Best Wishes, Arbi; Please vote if you find this posting was helpful or Mark it as answered.

How to create the BOM for co product

Dear friends,
How to create the BOM for Co product and How the production will create and how the costing will capture for that.
Regards,
Sabhapathy R

Dear Umesh,
How Bom created for co product
By product
Header
xxx
101
mvt
mvt
qty
item
yyy
261
1
zzz
531
0.5-
By product
Same way how we create co product for BOM. pl explain with simple example.
Thanks &regards,
Sabhapathy R

How to create new structure for SOP?

How to create new structure for SOP? and transfer data for long term planning?

hi dear
For SOP there are two types
1. Standard SOP : this the standard SOP configured by SAP consider the Level by Level planning and planning done for product group .
2. Flexible planning SOP: this option is given, so that Rough planning/SOP planning can be done as per the client requirement.e.g planning structure can be sales orgn., distribution channel, division, plant, material
For configuring the flexible planning SOP follow steps
1. Define info structure in IMG
where u define the characteristic and Key field
2. Set parameters for info structures and key figures
Sales & Operations Planning >Master Data>Set parameters for info structures and key figures
where u define Planning method
Consistent planning
Level-by-level planning
Delta planning
and aggregation type
1. Average calculated
2. Total created
3. No aggregation
3. create Planning type with reference to info structure
Regards
Suresh

How to create authorization role for just displaying query prefix Q and X.

Hi Expert,
I hope someone can help me on how to create authorization role for just displaying and executing BEX Queries prefix Q and X. I'm currently using SAP BI 7.1.
Actually, I already created one role called : Z_FORINDO_ONLYDISPLAY_QX
where I only put in the Authorization Component (in the Role Maintenance - Tcode 'pfcg'):
-->Manually Business Information Warehouse
--> Manually Business Explorer - Components
Activity : Display, Execute, Enter, Include, Assign
InfoArea : *
InfoCube : *
Name(ID) of a reporting component : *
Type of a reporting component : Calculated key figure, Restricted key figure, Template structure
--> Manually Business Explorer - Components
Activity : Display, Execute
InfoArea : *
InfoCube : *
Name(ID) of a reporting component : Q* , X*
Type of a reporting component : Query
But, the problem is I still can make changes on that queries (Q* and X*). Even, I still can run query with prefix Z. I use S_RS_RREPU Tamplete for Query Display and execution.
Please assist. Very much appreciate your help. Thanks.
Edited by: nadiyah salleh on Mar 18, 2008 11:22 AM

Question close. This issue has been resolved.

How to create user dsn for microsoft access driver(*.mdb,.*accdb) in 64 bit

hi,
how to create user dsn for microsodt access driver(*.mdb,*.accdb) using command line in 64 bit.
i have installed 64 bit drivers and when use following command
C:\Windows\System32>odbccad.exe CONFIGDSN "Microsoft Access Driver (*.mdb,*.accdb)" "DSN=GLDatabase|Description=GL Data Source|DBQ=C:\DataBase\1.mdb"
CONFIGDSN:'unable to create a datasource for the "Microsoft Access Driver (*.mdb,*.accdb)" component not found in the registry with the error code -2147467259
but it works with C:\Windows\SysWow64

yes i have installed Microsoft Access Database engine 2010 redistributale => AccessDatabaseEngine_x64.exe
i can able to create user dsn using odbccad32.exe in system32 folder but using command line its not working
C:\Windows\System32>
odbccad.exe CONFIGDSN "Microsoft Access Driver (*.mdb,*.accdb)" "DSN=GLDatabase|Description=GL Data Source|DBQ=C:\DataBase\1.mdb"
CONFIGDSN:'unable to create a datasource for the "Microsoft Access Driver (*.mdb,*.accdb)" component not found in the registry with the error code -2147467259

How to Create a datatype for a storeprocedure which has got array ?

Hi All,
Please tell me how to create a datatype for a storeprocedure which has got an array structure ?
Thanks,
Sindhu.

Hi Sindhu.
You would have to use a JDBC Cursor for this but it's possible only Output parameters, not Input parameters.
It's describle in a help link:
Defining an EXECUTE Statement http://help.sap.com/saphelp_nwpi711/helpdata/en/44/7b72b2fde93673e10000000a114a6b/frameset.htm
The following SQL data types are supported:
INTEGER, BIT, TINYINT, SMALLINT, BIGINT, FLOAT, REAL, DOUBLE, NUMERIC, DECIMAL, CHAR, VARCHAR, STRING, LONGVARCHAR, DATE, TIME, TIMESTAMP, BINARY, VARBINARY, LONGVARBINARY, BLOB (input and output), CLOB (input and output), CURSOR (output; only in connection with the Oracle JDBC driver)
I think you can execute your StoreProcedure many times depends of array occurs.
Regards.
Bruno.

How to create a macro for a planning type in MC8b transaction

Hi,
I am presently working for a product allocation demand, which have a information structiure with characteristic and key field.
the characteristic are production allocation quantity, incoming order quantity, and open order quantity.
i have created a planning type in which the data updation takes from the excel file to the planning type in mc95.
but i need to create a macro for this planning type .
can any body give the details information how to create a Macro for a planning type.
Thanks and regards
GopalKrishna

Dear Gopal
May be the link would be helpful to you.
[Planning Types and Macros|http://help.sap.com/saphelp_46c/helpdata/en/a5/631cc443a211d189410000e829fbbd/frameset.htm]
Drill down the left tab once you opened the link, for more information.
Thanks
G. Lakshmipathi

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

How to create a ARD for 64 Bit And 32 Bit Systems

Similar Messages

Maybe you are looking for