How to create bapi funcion module

Hi,
I am getting an error while activating bapi funcion module that "REPORT/PROGRAM statement missing, or program type is i(INCLUDE)".
Can any body resolve this error.

Hi Jyoti,
Have you checked this??
http://www.sap-img.com/abap/bapi-step-by-step-guidance.htm

Similar Messages

How to create the funtion module with step by step

friends can u help me regarding how to create the function module very urgent,
regards
bhavani

To create a function module, you first need to create a Function Group which will keep all the function module of same functionality.
To create a Function Group, go to SE80->Click on Workbench-Edit Object->Function Group Tab->Enter Function Group name-> Click Create.
To create a Function Module:
Go to T.Code SE37->Enter the Function name->Enter Function Group name n Short Des.-> Here you need to define Import, Export parameters with the condition. Also you can write your code in source code tab.
check this link
Converting seconds values
check the FM code. if you don't have this FM code, create it in SE37 and make use of it.
FM MONI_TIME_CONVERT
FUNCTION MONI_TIME_CONVERT.
""Lokale Schnittstelle:
*" IMPORTING
*" REFERENCE(LD_DURATION) TYPE SY-TABIX
*" EXPORTING
*" REFERENCE(LT_OUTPUT_DURATION) TYPE SWL_PM_CVH-DURATION
DATA: LD_HOUR(4) TYPE N. "
DATA: LD_MIN(4) TYPE N. "
DATA: LD_SEC(4) TYPE N. "
DATA: LD_VALUE2(2) TYPE N.
DATA: LD_VALUE3(3) TYPE N.
DATA: LD_VALUE4(4) TYPE N.
DATA: SAVE_DURATION LIKE SY-TABIX.
data: ld_minus(1).
SAVE_DURATION = LD_DURATION.
if ld_duration < 0.
save_duration = save_duration * ( -1 ).
ld_minus = true.
endif.
CLEAR LT_OUTPUT_DURATION.
IF SAVE_DURATION NE 0.
LD_HOUR = SAVE_DURATION DIV 3600.
save_duration = save_duration - ld_hour * 3600.
LD_MIN = SAVE_DURATION DIV 60.
save_duration = save_duration - ld_min * 60.
LD_SEC = SAVE_DURATION.
IF LD_HOUR LE 100.
LD_VALUE2 = LD_HOUR.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+3(2).
ELSEIF LD_HOUR LE 1000.
LD_VALUE3 = LD_HOUR.
WRITE LD_VALUE3 TO LT_OUTPUT_DURATION+2(3).
ELSE.
LD_VALUE4 = LD_HOUR.
WRITE LD_VALUE4 TO LT_OUTPUT_DURATION(4).
ENDIF.
WRITE ':' TO LT_OUTPUT_DURATION+5.
LD_VALUE2 = LD_MIN.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+6(2).
WRITE ':' TO LT_OUTPUT_DURATION+8.
LD_VALUE2 = LD_SEC.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+9(2).
LT_OUTPUT_DURATION = LT_OUTPUT_DURATION+1.
if ld_minus = true.
write '-' to lt_output_duration+1(1).
endif.
ELSE.
job running or aborted
ENDIF.
ENDFUNCTION.
Eg:2
Use the following procedure to create a function module
1.From the ABAP/4 Development Workbench screen, press the Function Library button on the Application toolbar.
2.Type the name of your function module in the Function Module field. The name must begin with Y_ or Z_.
3.Press the Create button. The Function Module Create: Administration screen is shown
4.Type the name of a function group in the Function Group field. The function group name must be four characters long and must begin with Y or Z.
5.Type an S in the Application field. This field is used to indicate which function area uses the function module. Our functionality is not used by any functional area, it is simply an example, so any choice will do. (S indicates that the function module contains functionality needed by Basis.)
6.Type a description of the function module in the Short Text field. The contents of this field are seen when displaying a list of function modules.
Press the Save button on the Application toolbar.
7.If the function group does not already exist, a pop-up informs you of that fact and asks you if you want to create it. Press the Yes button to create the function group. The Create Function Group dialog box appears. Type a description in the Short Text field and press the Save button. The Create Object Catalog Entry screen appears. Press the Local Object button. You are returned to the Function Module Change: Administration screen.
8.Press the Source Code button on the Application toolbar. The Function Module Edit screen is displayed.
9.Type the source code for your function module. Do not change the system-generated comment lines under any circumstances! Your function module might fail to operate if you do.
10.Press the Save button on the Application toolbar. The message Program xxxxx saved appears in the status bar at the bottom of the window.
11.Press the Back button on the Application toolbar. You are returned to the Function Library Initial screen.
12.If you want to define import or export parameters, select the Import/Export Parameter Interface radio button. Press the Change pushbutton. You are shown the Import/Export Parameters screen (refer to Figure 19.6). Type the names of your parameters in the first column and enter any other desired characteristics for each parameter. When you are finished, press the Save button and then the Back button.
13.Finally, to activate your function module, press the Activate button on the Application toolbar of the Function Library Initial Screen.
http://www.erpgenie.com/abap/bapi/example.htm

How to use BAPI function module for maintaing product type to material

Hi,
Can you pls suggest me how to use BAPI Fuction module CCAP_REV_LEVEL_MAINTAIN
for maintaining the product type for the material using change number.
Pts will be rewarded.
Best Regards,
Padhy

Hi,
Can you pls suggest me how to use BAPI Fuction module CCAP_REV_LEVEL_MAINTAIN
for maintaining the product type for the material using change number.
Pts will be rewarded.
Best Regards,
Padhy

How to create Bapis step by step

Hi.
Can u tell me how to create Bapi step by step with a sample program..

Copy-paste from http://www.sap-img.com/abap/bapi-step-by-step-guidance.htm
has been reported to SCN Moderators, along with all those who are providing links.
pk

How to create a login module

Hi Everyone.
How to create a login module which like www.sdn.sap.com
the module is on the top left corner

http://help.sap.com/saphelp_nwce10/helpdata/en/46/3ce9402f3f8031e10000000a1550b0/frameset.htm

How to Create the Function Module Exit

Hi,
How to Create the Function Module Exit. Please tell me the step by step procedure.

Hi,
Check this link for how to create the function module exit..
http://sap.niraj.tripod.com/id62.html
Thanks
naren

How to create a funtion module as i need.

How to create a funtion module, that which should retrive mutiple data with out using data structure.
i.e..using internal table i need to get only some data.
Example:
 1) Using MARC table, i need to get fields only with data (werks, matnr, mmsta, pstat).
i.e importing : werks.
 exporting: werks,
 matnr,
 mmsta,
 pstat.
 2) Also i need coding to get data by without using internal table with the only fields i want.

Hi,
You can only create function modules and function groups using the Function Builder in the ABAP Workbench. For further information, refer to Creating New Function Modules. This section uses an example to illustrate how a function module is created from the point of view of ABAP programming.
Function Groups and Function Modules:
Firstly, we create a new function group DEMO_SPFLI to hold the function module. Then, we can create the new function module.
Parameter Interface:
You can specify the types of interface parameters in function modules in the
same way as the parameter interfaces of subroutines. Since function
modules can be used anywhere in the system, their interfaces can only contain
references to data types that are declared systemwide. These are the elementary
ABAP data types, the systemwide generic types, such as ANY TABLE, and types
defined in the ABAP Dictionary. You cannot use LIKE to refer to data types
declared in the main program.
Exceptions:
Our function module needs an exception that it can trigger if there are no entries
in table SPFLI that meet the selection criterion. The exception NOT_FOUND
serves this function.
Source Code:
Having defined the parameter interface and exceptions, we can now write the
source code of our function module. To do this, choose Source code in the
Function Builder. This opens the ABAP Editor for the include program
L<fgrp>U<xx> (see Function Groups). This is the include that will
hold the program code for the function module;
Data in Function Modules
You can use the TYPES and DATA statements to create local data types and
objects. The interface parameters also behave like local data objects. In
addition, you can access all of the global data of the main program. This data is
defined in the include program L<fgrp>TOP. To open this include, choose Goto
Global data. The global data behaves like the instance attributes of a class.
The first time you call a function module in a particular function group, the data is
loaded into memory. It can then be accessed and changed by all of the function
modules in the group. The system retains the values until the next time a function
module is called.
Calling Subroutines
You use subroutines for local modularization. Function modules can
also use this technique. The function module that they call are defined in the
corresponding main program.
If you only want to call a subroutine from a single function module, it is best to
define them in the same include program as the function module itself, directly
after the ENDFUNCTION statement. These subroutines can be called from all
function modules in the function group, but for clarity, they should only be called
from the function module that precedes them.
If you want to define a subroutine that will be called from several different function
modules, you can define a special include program for it with the name
L<fgrp>F<xx>.
Raising Exceptions
There are two ABAP statements for raising exceptions. They can only be used in
function modules:
RAISE <except>.
and
MESSAGE..... RAISING <except>.
The effect of these statements depends on whether the calling program handles
the exception or not. If the name <except> of the exception or OTHERS occurs
in the EXCEPTIONS addition of the CALL FUNCTION statement, the exception is
handled by the calling program.
If the calling program does not handle the exception
The RAISE statement terminates the program and switches to debugging mode.
The MESSAGE ..... RAISING statement display the specified message. How the
processing continues depends on the message type.
If the calling program handles the exception, both statements return control to the
program. No values are transferred. The MESSAGE ..... RAISING statement
does not display a message. Instead, it fills the system fields SY-MSGID, SYMSGTY,
SY-MSGNO, and SY-MSGV1 to SY-MSGV4.
Source Code of READ_SPFLI_INTO_TABLE
The entire source code of READ_SPFLI_INTO_TABLE looks like this:
FUNCTION READ_SPFLI_INTO_TABLE.
""Local interface:
*" IMPORTING
*" VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
*" EXPORTING
*" VALUE(ITAB) TYPE SPFLI_TAB
*" EXCEPTIONS
*" NOT_FOUND
SELECT * FROM SPFLI INTO TABLE ITAB WHERE CARRID = ID.
IF SY-SUBRC NE 0.
MESSAGE E007(AT) RAISING NOT_FOUND.
ENDIF.
ENDFUNCTION.
The function module reads all of the data from the database table SPFLI where
the key field CARRID is equal to the import parameter ID and places the entries
that it finds into the internal table SPFLI_TAB. If it cannot find any entries, the
exception NOT_FOUND is triggered using MESSAGE...RAISING. Otherwise, the
table is passed to the caller as an exporting parameter.
Regards,
Bhaskar

How two create UPDATE FUNCTION MODULE

Hi,
I have 2 tables to update one after the other...
I have geard it is advisable to use update function module for this..
can any1 tell me how to create and work with update function modules...
Answers will be rewarded....

Abhay,
How an update function module works is, the execution of the FM is delayed to until when a COMMIT WORK statement is executed.
Hence if you have the data available for updating the two DB tables at the time of calling the FM, you can pass the tables to the same FM and program the DB update for both in the same FM.
However the COMMIT WORK should be outside the FM further down in the calling program.
This link is very good and easy to follow
http://help.sap.com/saphelp_erp2005vp/helpdata/en/41/7af4daa79e11d1950f0000e82de14a/frameset.htm
Hope it helps
Aditya[url=http://help.sap.com/saphelp_erp2005vp/helpdata/en/41/7af4daa79e11d1950f0000e82de14a/frameset.htm]
Message was edited by:
Aditya

How to create Jaas Login module !! Urgent

Hi developers
I want to make some changes in logon messages. Right now we are getting only error user authentication failed on the portal even if user is locked or some other reason is there for failed authentiaction. I want proper message should be displaying based on user input. For it I hope its good to create Jaas logon module so that i can modify it accordingly .
kindly if any one can give me way out , its urgent.
how to create it step by step. it would be highly appriciable.
any inputs are appriciated .
Thanks in advance
Abhay

Hi Abhay,
1.) Every question is "urgent"... Please read https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement - section "Use a Good Subject Line"
2.) For JAAS Login Modules examples, see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4d65ed90-0201-0010-3aba-9209836e8242
Hope it helps
Detlev

I'm very new tp SAP ABAP, how to create a function module..V.URGENT

hi folks,
I'm very new to sap abap.
I want to create a function module.
the following is my requirement.
by passing(eporting parameters to funtion module from pgm point of view) a field, i want to get(importing parameters from the funtion module, from pgm point of view) some 7 fields(of various tables).
please also tell me how can code an inner join for tables 5 tables(a,b,c,d,e). i'm joining a on b, b on c, c on d,the problem here is that i can not join d on e as there are no common fields in d and e.
can i join e and c or b, there are no common fields even in a and e.
please tell me the solution as soon as possible, this very important and urgent deliverable.
thanks in advance

Here is link for creating function modules
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/frameset.htm">Creating Function Modules</a>
Regds
Manohar

How to Create a Function module z_create and to track the error records?

I want to create a function module z_create which will insert the data from the internal tables gt_model_master and gt_model into the corresponding database custom tables y_model_master.
Secondly if any error is encountered during the above updation, then how to track those error records ?

HI,
check the sy-subrc ,if it is zero the insertion is success,otherwise use
message class.
if sy-subrc ne 0.
message e052(zmessage).
endif.
Edited by: rakesh dhudipala on Feb 12, 2008 2:33 PM
Edited by: rakesh dhudipala on Feb 12, 2008 2:33 PM

How to create RFC function module and how to call this function module

Hi,
i want to know step for creating RFC function module and then How to use this function module from some other sap system.
Thnaks,
jigar

Jigar,
To implement a remote function module in ABAP, perform the following steps:
Register the module as remotely callable in the RFC server system.
In the function module Administration screen (transaction code SE37), set the field Can be called via REMOTE CALL. Registering a module as remote causes an RFC stub to be generated for it.
Write the code for the function module.
Create the destinations.....................
Displaying, Maintaining and Testing Destinations
To display, create or modify destinations, choose Tools ® Administration ® Administration ® Network ® RFC destinations or enter transaction code SM59.
Remote Destinations are stored in table RFCDES. The RFCDES table describes logical destinations for remote function calls.
It is not possible to maintain the RFCDES table directly.
You can also access logical destinations via the Implementation Guide (IMG) by choosing Tools ® AcceleratedSAP ® Customizing ® Execute Project ® SAP Reference IMG.
In the Implementation Guide, expand the following hierarchy structure:
Basis
Application Link Enabling (ALE)
Sending and Receiving Systems
Systems in Network
Define Target Systems for RFC Calls
Displaying Destinations
The initial screen for this transaction displays a tree:
Different connection types (i.e. partner systems or programs) are possible. For further information, see Types of Destinations.
To display all information for a given destination, double-click it, or place the cursor on it and press F2 .
To search for a destination, press the Find button and specify your selection. You get a list of all entries matching your selection. Place the cursor on the one you want, and press F2 or simply double-click the destination. All information for the given entry appears.
Creating Destinations
On the destinations overview screen (transaction code SM59), the connection types and all existing destinations are displayed in a tree structure.
All available connection types are explained in Types of Destinations.
To create a new RFC destination, press the Create button. A new screen is displayed with empty fields for you to fill in.
If you want to create a new destination
As you create a remote destination, you can specify a particular application server or a group of servers for a balanced distribution of system load.
For details of the destination parameters, see Entering Destination Parameters.
Changing Existing Destinations
On the destinations overview screen (transaction code SM59), the connection types and all existing destinations are displayed in a tree structure.
You can display all information for a given destination by double-clicking it or pressing F2 on it.
To change an existing destination, double-click it, or place the cursor on it and press the Change button.
For details of the destination parameters, see Entering Destination Parameters.
Testing Destinations
To test a destination, choose the appropriate function from the Test menu.
Connection (also available via the Test connection pushbutton)
Authorization (checks logon data)
Local network (provides a list of application servers)
You can use the CALL FUNCTION statement to call remote functions, just as you would call local function modules. However, you must include an additional DESTINATION clause to define where the function should run:
CALL FUNCTION RemoteFunction
DESTINATION Dest
EXPORTING
f1 =...
f2 =...
IMPORTING
f3 =...
TABLES
t1 =...
EXCEPTIONS......
The field Dest can be either a literal or a variable: its value is a logical destination (for example, "hw1071_53") known to the local SAP System. Logical destinations are defined in the RFCDES table (or the TRFCD table in R/2 Systems) via transaction sm59 or the following menu path: Tools ® Administration, Administration ® Network ® RFC destinations. You can also access logical destinations via the Implementation Guide (IMG) by choosing Tools ® Customizing ® Enterprise IMG. In the Implementation Guide, you can then choose Cross-application components ® ALE ® Communication ® Define RFC destination.
The remote function call concept, for example, allows you to access a function module in an R/2 System from an ABAP program in an R/3 System. If you want to read a customer record from your R/2 Systems database, create a remotely callable function module in the R/2 environment which retrieves customer records. Call this function from your R/3 System using a remote function call and listing the destination for the target R/2 System:
Pls. reward if useful

How to create ENQUEUE function module for s567 table

Hi Experts,
Anyone Plz tell the steps how to create a ENQUEUE function module for the table s567.
Its somewht urgent, plz help me.
<REMOVED BY MODERATOR>
Mohana
Edited by: Alvaro Tejada Galindo on Mar 10, 2008 4:21 PM

Hi,
You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.
Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.
Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.
Technicaly:
When you create a lock object System automatically creat two function module.
1. ENQUEUE_<Lockobject name>. to insert the object in a queue.
2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.
You have to use these function module in your program.
Hope this will give a basic idea.
Regards
Sudheer

How to create a Function Module

Hi
Please tell me the procedure to create a function module.
Thanks in advance,
Priya

Hi Srinivas,
In order to create a function module firstly you need to assign it to a function group.
In order to create function group goto t-code se37.
Choose Goto->Function groups-> Create group .
Give the function group name.
Then come back to se37 type in the name of your FM and then press CREATE button.

How can create a function module for currency and quantity fields

hi,
i want to create a function module with some fields.when i activated it give some errors for
netpr,menge,wemng fields(currency, quantity fields).error is it asks for reference fields.
please send me solution for it.
sreenu.

Hi Sreenu,
While creating CURRENCY/QUANTITY fields in the DataBase Table, you have to enter a REFERENCE TABLE and a REFERENCE FIELD to the field.
For that, after entering the field name and the data type in the correcponding columns, you have to place the cursor on the data type of the required field and click the CURRENCY/QUANTITY FIELDS tab. You will find two columns called REFERENCE TABLE and a REFERENCE FIELD.
you have to enter a reference table in which a currency/quantity field is used and a reference field which is a currency/quantity field in that table.
For Example, below is the table details.
FIELD DATATYPE LENGTH DEC.PLACES REF.TABLE REF.FIELD
1.SNO     CHAR 5
2.AMOUNT CURR 10     2          T001      WAERS
3.NOS     QUAN 5                 KNA1      /VSO/R_PAL_UL
Here Field 2(AMOUNT) is a CURR field whose Ref. Table is T001 and Ref. Field is WAERS and Field 3(NOS) is a QUAN field whose Ref. Table is KNA1 and Ref. Field is /VSO/R_PAL_UL.
Hope this will help you.
Regards,
Vaitheeswaran

How to create bapi funcion module

Similar Messages

Maybe you are looking for