How to create breakpoint with ABAP code?
Hi all,
I would like to create a breakpoint for my user id only.
So far, the only way that I know is by:
break <user_id>.
e.g.
break john.
HOWEVER, my user id contain a "." (i.e. chris.p) , and this cause syntax error.
Could anyone help me?
Thank you.
Best regards,
Chris
Hi chris.
greetings
try like this:-
if sy-uname = 'CHRIS.P'.
break-point.
endif.
if helpful, plz reward points.
regards
prashant
Similar Messages
-
How to add breakpoint in abap code
when use <i><b>java</b></i> call abap code ,
how to add breakpoint in abap code?Hi,
To start the ABAP debugger from your java client you have to set the JCO client to debug mode:
e.g.
yourJCOClient.setAbabDebugMode(true)
(hope thats the right method name:-)).
And don't forget to set also a break point of type "External" in the function module you call from your java client. For debuging, the user which calls the FM has to be a SAP User of type "<b>Dialog"</b> and has to be the rights to call RFCs, ... -
How to create PDF with Form Builder (T-Code:SPF) and how to use it?
How to create PDF with Form Builder (T-Code:SPF) and how to use it? Is there anyone can show me some doc. or PA material ? << removed >> Thank you very much!!
Edited by: Rob Burbank on Nov 11, 2010 1:04 PMPDF forms also known as Adobe From or Interactive Forms.
Check this link -
Interactive Forms
REG:ADOBE FORM
Adobe forms
Regards,
Amit -
How to create Matrix with Group report layout in xml
Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
Period-1 Period-2 Period-3 Period-4
COMPONENT
LABOUR - DIRECT
Actual 1 2 3 4
Actual Rate 10 10 10 10
Standard Rate
Var%
DEPRICIATION-DIRECT
Actual
Actual Rate
Standard Rate
Var%
OVERHEAD - DIRECT
Actual
Actual Rate
Standard Rate
Var%
LABOUR - IN DIRECT
Actual
Actual Rate
Standard Rate
Var%
Thanks in advanceYour friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
> -
How to create popup in ABAP webdynpro.
Hi,
I found lot of examples to create a popup/ model window for java webdynpro.
Could anyone give a pointer to an example which explains how to create popup in ABAP webdynpro??
Kind Regards
ShahulHi Thomas:
It worked fine the 1st time. Second time when the user clicks on the button to open up the popup it dumps.
Here is the code in the action for popup:
data: l_cmp_api type ref to if_wd_Component,
l_window_manager type ref to if_wd_window_manager,
l_api type ref to if_wd_View_controller,
l_text type string_table.
l_cmp_api = wd_comp_controller->wd_get_api( ).
l_window_manager = l_cmp_api->get_window_manager( ).
if wd_this->m_popup is initial.
wd_this->m_popup = l_window_manager->create_window(
window_name = 'DOCQSOW'
button_kind = if_wd_window=>co_buttons_ok
message_type = if_wd_window=>co_msg_type_none ).
component_usage_name = 'DOCQUERY_USAGE_1'
l_api = wd_this->wd_get_api( ).
wd_this->m_popup->subscribe_to_button_event(
button = if_wd_window=>co_button_ok
button_text = 'Transfer'
action_name = 'POPUP_CLOSED'
action_view = l_api ) .
wd_this->m_popup->SET_REMOVE_ON_CLOSE( abap_true ).
endif.
wd_this->m_popup->open( ).
Second time when the popup tries to open, I get the following error:
Method: RENDER_WINDOW of program CL_WDR_WINDOW_RENDERER========CP
Method: RENDER_WINDOW of program CL_WDR_CLIENT_SSR=============CP
Method: RENDER_POPUP_WINDOWS of program CL_WDR_CLIENT_SSR=============CP
Method: RENDER_WINDOWS of program CL_WDR_CLIENT_SSR=============CP
Method: IF_WDR_RESPONSE_RENDERER~RENDER_VIEWS of program CL_WDR_CLIENT_SSR=============CP
Method: IF_WDR_RESPONSE_RENDERER~RENDER_USER_INTERFACE_UPDATES of program CL_WDR_CLIENT_SSR=============CP
Method: IF_WDR_CLIENT~SEND_RESPONSE of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_WDR_CLIENT~SEND_RESPONSE of program CL_WDR_CLIENT_SSR=============CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Is there a way to destroy the instance of the m_popup?
Any help is appreciated!
Thanks -
How to create folder with sub folder ?
How to create folder with sub folder ?
Hi,
Questions. 17 / 17 unresolved -> very bad reputation
but ok - let's help anyway ...
1. create everything in Screen Painter
2. set FromPane and ToPane property correct.
example:
Items in MainFolder: FromPane & ToPane: 1 to 3
Items in SubFolderA (From 2 To 2) - SubFolderB (From 3 To 3)
shouldn't be that difficult
in your Code set oForm.PaneLevel when the user clicks on the Folder
lg David -
How to create Vector with reference to Collection
hello experts,
can someone let me know how to create vector with reference to Collection interface.
Collection is an interface. and we cant create an instance of it. i'm not clear of what to pass in that constructor.
Vector v = new Vector (Collection c);
what are the possible objects of 'c'
post some example code please.
thanksEver heard of reading the javadocs?
"Collection is an interface. and we cant create an instance of it." - you don't understand interfaces, then.
// I certainly can create a Collection - here's one
Collection c = new ArrayList();
// Now I'll add some Strings to my Collection.
c.add("foo");
c.add("bar");
c.add("baz");
// Now I'll make a Vector out of it.
Vector v = new Vector(c);% -
How to create a sub head(code) in a catalog- for service notification
Hi everyone,
How to create a sub head(code) in a catalog- for service notification?
Please guide with your valuable comments.
Please guide its very urgent.
Thanks and Regards
Edited by: MPVash Vash on Oct 24, 2008 8:14 AM
Edited by: MPVash Vash on Oct 30, 2008 7:38 AMHi,
Go to T-code QS41, give the catalog and code group and enter.
U can click on the code after selecting the code group and create new codes.
In SPRO u should see which type of catalog is assigned to the notification type. This u can see in the overview of the notification type by selecting the notification type in SPRO.
Regards
Haricharan -
How to create table with row type in smart forms
How to create table with row type in smart forms with out line type
please explain me the procedureHI,
A table type describes the structure and functional attributes of an internal table in ABAP. In ABAP programs you can reference a table type TTYP defined in the ABAP Dictionary with the command DATA <inttab> TYPE TTYP. An internal table <inttab> is created in the program with the attributes defined for TTYP in the ABAP Dictionary.
A table type is defined by:
its line type, that defines the structure and data type attributes of a line of the internal table
the options for managing and accessing the data ( access mode) in the internal table
the key ( key definition and key category) of the internal table
The row type is defined by directly entering the data type, length and number of decimal places or by referencing a data element, structured type ( structure, table or view) or other table type. Or the row type can be a reference type.
<b>for more info :</b> http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb366d358411d1829f0000e829fbfe/content.htm
Internal table
Regards
Sudheer -
How to create complaints with reference to ECC Billing document (CRM 7.0)
Hi experts!
I use ECC 6.0 and CRM 7.0.
I have to create CRM complaints (ZCLR - CLRP) with reference to ecc billing documents.
I read the following topics and help:
1. How to create complaints with referenceto ECC Billing document
2. Re: How can we transfer billing documents from SAP ERP to CRM 2007?
3. http://help.sap.com/saphelp_crm70/helpdata/en/46/029ba32e675c1ae10000000a1553f6/frameset.htm
Made these settings:
1. Define the Business object type
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Define Object types for Transaction reference
2. Assign Business Object Types to Transaction Types
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Assign Business Object Types to Transaction Types
3. Implement a BADI - CRM_COPY_BADI_EXTERN.Check Implementation CRM_COPY_BADI_BILLDO for more information on the coding for referencing the ECC Billing document.
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>BAdI: Create Complaint with Reference to External Transaction.
but still do not know,
1) if I should pre-replicate billing documents into CRM ?
2) Or, the system uses the RFC to find these documents in ECC to create reference?
Please help me.
Best regards Kostya.
Edited by: Kostya Khveshchenik on Oct 20, 2010 2:09 PMnot resolved =(
Edited by: Kostya Khveshchenik on Nov 19, 2010 8:50 AM -
How to create Rules with Flex Field mapping in the bpm worklist
I Have created a flex field label and was able to map to the flex field attributes .
But when i try to create a rules , I don't see the label or the flex attributes in the task payload .
Can someone please help is understanding how to create Rules with Flex Field mapping in the bpm worklist .
Even I am also searching for any scripts which will take the flex fields prompts and can directly create a label in the bpm worklist .
Any pointers or suggestion is highly appreciated .Hi,
SE38 -> Enter program
Select Variants button and display. In the next screen, enter a variant name, (If not existing , press Create to create new one), else click on Change.
Now the selection screen will display with a button "Variant Attributes" at the top.
Click on that button.
In the next screen, go to the selection variable column of the date field. Press F4 or drop down and select 'D' for date maintenance.
In the column "Name of Variable (Input Only Using F4)" press F4 or drop down, select whichever kind of date calculation you want and save the variant.
Now whenever you run the prgrm with this variant, date will be displayed by default.
Regards,
Subramanian -
Hello everybody,
It's my first time using Java Card ^_^,I want to create a file and fill the fill with binary data.but i don't know how to create file with APDU commands,so I need help here.
I think that there must be a Manual of the JavaCard's OS in this world,can someone tell me where to download it??
Thanks.
the fllowing is my card:
Samsung S1
Model:TiEx-32J
EEPROM size:32k
Platform Version:OP 2.0.1
Card Manager Status:OP_READY
KMC:40~4F/No derivation
Message was edited by:
AllenHuangIf you look around the forum for a bit, you will see that there is no notion of file systems on JavaCards (lexdabear posted this information less than two hours ago :-)). To store files, you will have to write an applet to hold byte arrays of the required size and handle receiving and sending of these.
As for documentation, you should have a look at the GP (General Platform) specification at http://www.globalplatform.org/, which defines communication between smart cards and other devices, as well as Sun's own JavaCard pages (http://java.sun.com/products/javacard/), which contain several useful resources on JavaCards.
Message was edited by:
Lillesand -
How to create parameter with multiple selection in a query (SQ02) ?
Hi Exports
Do you know how to create parameter with multiple selection in a query (transaction SQ02)?
thanks.Hi
i know how to create user parameter at SQ02,
the question is how to create multiple selection parameter? -
How to create database with ASM
HI
How to create database with ASM?
I install vmware workstation on window XP .On virtual machine install Linux 5 enterprise (Oracle) install.
I install oracle DB software only. Also make 3 disk for ASM .
1 -- When I want to install oracle DB with ASM . In this process candidate disks not show . Why?
How I can see disks ..
so I simple install oracle DB software only.
2 -- Now I want to create database with ASM by DBCA .
What process I will follow ?
Please guide me
ThanksHi
Steps to create database with ASM.
1.Install oracle binary with active CRS(For single node installation CRS is activated when you run root.sh) .
2.Create disk without file ssytem.
3.Assign disk to raw .
4.Change owner and permission to raw devices.
5.Configure ASM manually or USing DBCA.
Manually ASM Configuration.
a.Create initialization parameter file and password file.
b.Mandatory parameter is "instance_type=asm" as per your need configure rest of parameter like db_cache_size,large_pool_size,processes,remote_login_passwordfile,shared_pool_size etc..
c.To discover disk configure "asm_diskstring=/dev/raw/raw*"
Using DBCA to configure ASM.
1.In storage type section choose ASM.It will ask for password of sysdba in 10g.
2.ASM configuration window will open -> here it create disk group -> it shows all available ASM candidate disk automatical -> choose normal redundancy,external redundancy or high redundancy.
ASM disk also can be conbfigured with ASMLIB .
If ASM disk is configured you can start asm instance in nomount state and query to v$asm_disk to see all candidate disk.V$asm_disk only shows disk which is configured in asm_diskstrings.
Hope this will help U,
Tinku -
How to create CATALOG with MS SQL Server?
Connection class has getCatalog(strCatalog) method. In order to use it, we must create CATALOG in Database?
How to create CATALOG with MS SQL Server?
Help me, please!!!You do not create these for any database, this is part of the Connection metadata.
The Catalog is the third level of table-like database object qualification as in "Catalog.Schema.Table". For SQLServer the qualification scheme is "Database.Owner.Table" and I would be surprised if they reported anything for the current connections getCatalog() method call.
What many people do is avoid table qualification altogether by setting the connection's context in a database proprietary manner and then keeping the SQL as clean as possible. For many ODBC and JDBC drivers this can be set in the configuration. For MS SQLServer you can also execute a "USE dbname" statement on the connection to avoid table qualification.
Maybe you are looking for
-
Reg:Variant Dependencies & Pricing
Hi Gurus, I have configured up to the below mentioned steps. 1.Creation of Material Master Record with required settings 2.Creation of Characteristic and it's values 3.Craetion of class 4.Assign characteristics to Class 5.Create configuration profile
-
Error in invoice posting in MM-SUS scenario
Dear Experts, I have configured MM-SUS scenario with SRM5.0, PI7.0 and ECC5.0. The invoice is coming from the SUS system but not getting posted in R/3 because of following error u201CA company code cannot be determined for LS SRM_V1u201D. (SRM_V1 is
-
Parallax code not working in CC 2014.1
Hi!, I have being using this code for parallax in CC 2014, as an action on the stage on a scroll event. // scrolling controls animation var animationHeight = 25000 var stageHeight = sym.$("Stage").height() var scrollPos = sym.$("Stage").scrollTo
-
MacBook has fatal error on startup
Hi, My macbook has just this morning - when I needed to email an assignment to a professor of course - has started to experience fatal errors on startup. The computer starts up normally,and once the desktop has loaded, a dialog comes up saying someth
-
Got a way to remove inbuit app in asha 311
I have a way to remove the inbuit app. Just you have to download the same app from Nokia stores which you want to remove. Now arrange them side by side. And now delete the app which you downloaded.. When you have deleted the app the RED CROSS sign wi