How to create a sub head(code) in a catalog- for service notification
Hi everyone,
How to create a sub head(code) in a catalog- for service notification?
Please guide with your valuable comments.
Please guide its very urgent.
Thanks and Regards
Edited by: MPVash Vash on Oct 24, 2008 8:14 AM
Edited by: MPVash Vash on Oct 30, 2008 7:38 AM
Hi,
Go to T-code QS41, give the catalog and code group and enter.
U can click on the code after selecting the code group and create new codes.
In SPRO u should see which type of catalog is assigned to the notification type. This u can see in the overview of the notification type by selecting the notification type in SPRO.
Regards
Haricharan
Similar Messages
-
How to create the sub type field in hr abap infotype
hi ,
how to create the sub type field in hr abap infotype.
regards,
venkat.Try like this also
creating of infotype please follow these steps ...
Step 1: Create Infotypes
i. Goto Transaction PM01 To create Infotypes:
ii. Enter the Infotype Number and say create all.
iii. The following message would display:
i. PSnnnn Does not exist. How do you want to proceed?
iv. Click
v. A maintain Structure screen appears.
Fill in the short text description and the PS structure of the Infotype.
Since the fields Personnel No, Employee Begin Date, End Date, Sequential Number,Date of Last Change, Name of user who changed the object are available in the PAKEY and PSHD1 structure, define the PSnnnn structure with only the fields you required.
vi. Once the PS Structure is created, save and activate the structure.
vii. In the initial screen of PM01, now click on .
Create a new entry for the infotype.
Fill in the values as mentioned below and save.
Infotype Characteristics:
Infotype Name of the infotype_ Short Text: __Short Description________
*General Attributes :
Time constraint = 1
Check Subtype Obligatory
Display and Selection:
Select w/ start = 3 Valid record for entered data
Select w/ end = 5 Records with valid dates within the period entered
Select w/o date = 6 Read all records
Screen header = 02 Header ID
Create w/o end = 1 Default value is 31.12.9999
Technical Data:
Single screen = 2000
List screen = 3000; List Entry Checked.
viii. In the initial screen of PM01, now click on .
Choose the infotype entry in the list.
Fill in the values as mentioned below and save.
Technical Attributes:
In tab section,
The following attribute values are given:
Applicant DB Tab = PAnnnn Infotype Name
Subtype field = SUBTY
Subtype table = T591A
Subty.text tab. = T591S
Time cnstr.tab. = T591A
Prim. /Sec. = I Infotype
Period/key date = I Interval
and .
ix. Infotype Screen Modification:
Edit Screen 2000 from PM01 for the Infotype.
ABAP Editor for the Infotype Program MPnnnn00 will be displayed.
Click . Flow Logic will be displayed. There string coding of your own logic.
Regards
Pavan -
Urgent!!help me! how to create UIInput component in code?
hello all
how to create UIInput component in code? my code as followed:
UIComponent nComponent = application.getComponent("Input");
if (!(nComponent instanceof UIOutput)) {
throw new ClassCastException("error message...");
nComponent.setParent(parentComponent);
nComponent.setRendererType("Text");
nComponent.setComponentId(getClientId(context,nComponent));
UIOutput newComponent = (UIOutput)nComponent;
newComponent.setValueRef("mymodel.propname");
and input can get value from model,but can not update value to model?why?how can i do?Trying to understand the code snippet you posted. Could you please explain why you are casting your input component to output, then setting the valueRef on it ??
-Jayashri -
Dear sir,
i new for labview how to create a sub vi
Solved!
Go to Solution.nara2812 wrote:
Dear sir,
i new for labview how to create a sub vi
Here are some other tutorials you might want to look at
3 Hour Introduction
6 Hour Introduction
LabVEW Basics
Self Paced training for students
Self Paced training beginner to advanced, SSP Required
LabVIEW Wiki on Training
Learning NI
Getting Started with NI Products
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
How to created a Report to calculate On-Hand inventory for pending sales
hi,
how to created a Report to calculate On-Hand inventory for pending sales orders.for this report what are the tables and fields we have to use give me sample report.
thank you
radhakrishna.Hi!
Tables:
VBAK - sales order header data
VBAP - sales order position data
VBUK - sales order status header data
VBUP - sales order status position data
VBELN field is the key between the tables.
Statuses in tables VBUK, VBUP: A-uncompleted, B-partially completed, C-fully completed
Regards
Tamá -
How to create a ABAP report off of SRM box for live data?
How to create a ABAP report off of SRM box for live data?
Thanks in advance.
York.you can try infoset query:
STEP - A:
1. Go to T Code RSQ02 and give the InfoSet name & select CREATE.
2. Provide the Name(Description) and Data Source i.e. for eg here i take "DIRECT READ OF TABLE" = /BIC/AODS100. Then CONTINUE.
3. Select what to Include in the 3 options available with the POPUP, here "INCLUDE ALL TABLE FIELDS". Then Check the fields and click GENERATE(one RED and WHITE round icon).
4. Now provide the PACKAGE for the INFOSET. Come Back(F3).
STEP - B: optional(If u want to create a new user group)
1. Select ENVIRONMENT -> USER GROUPS. Provide the User Group name and CREATE.
2. Provide Description and SAVE.
3. Provide PACKAGE and SAVE. Come Back (F3) to the Initial Screen.
4. Click Role/User Group Assignment. Select Newly Created User Group or an existing one. Then SAVE (CTRL + S). F3.
STEP - C:
1. Select ENVIRONMENT -> Queries. Provide the query name and CREATE.
2. Select the INFOSET u have created and assigned the user group.
3. Provide the Title and Select BASIC LIST. There you have to select (check) the fields you want to display, SAVE and then TEST. It will ask for Variant, just CONTINUE. -
How to create a sub total and grand total using my query.
How can I create a sub total for each section and grand total for using my query like this. your help is appreciated. I am working with 9g
WITH BidItemsInformation AS
( SELECT DISTINCT q.iplineno "Line Number", q.section "Section Number",
i.item "Item Number",
initcap(i.idescr) "Description" ,
i.iunits "Unit",
q.qty "Quantity" ,q.price "Engineers Unit Price",
(q.price * q.qty) "Engineers Estimate"
FROM letprop l,
proposal p,
propitem q,
bidlet b,
bidtabs c,
itemlist i,
vendor v,
bidders d
WHERE(l.letting = b.letting
And b.letting = c.letting
And p.cspecyr = i.ispecyr)
AND q.prpitem = i.item
AND p.contid = l.lcontid
AND q.contid = p.contid
AND c.vendor = l.avendor
AND l.CALL = c.CALL
AND q.lineflag = c.lineflag
AND q.iplineno = c.iplineno
AND l.letting = d.letting
AND c.letting = l.letting
AND c.CALL = d.CALL
AND v.vendor = d.vendor
-- AND AND l.letstat = 'A'
AND c.lineflag = 'L'
AND l.letting ='&letting'
AND l.CALL = '&call'
), BiddersInformation AS
-- This is where you make your changes for vendor name and vendor number Do not touch the above code
-- It is always the same for any call number and letting date
( SELECT IPLINENO "BLine Number",
MAX(CASE WHEN VENDOR='K020' THEN bidprice ELSE NULL END) "K020:: Unit Price",
MAX(CASE WHEN VENDOR='K020' THEN bidprice ELSE NULL END) K,
MAX(CASE WHEN VENDOR='H438' THEN bidprice ELSE NULL END) "H438:: Unit Price",
MAX(CASE WHEN VENDOR='H438' THEN bidprice ELSE NULL END) H,
MAX(CASE WHEN VENDOR='U010' THEN bidprice ELSE NULL END) "U010:: Unit Price",
MAX(CASE WHEN VENDOR='U010' THEN bidprice ELSE NULL END) U,
MAX(CASE WHEN VENDOR='G110' THEN bidprice ELSE NULL END) "G110:: Unit Price",
MAX(CASE WHEN VENDOR='G110' THEN bidprice ELSE NULL END) G,
MAX(CASE WHEN VENDOR='H530' THEN bidprice ELSE NULL END) "H530:: Unit Price",
MAX(CASE WHEN VENDOR='H530' THEN bidprice ELSE NULL END) H1
FROM BIDTABS
WHERE LETTING='&letting'
AND CALL='&call'
AND BIDPRICE <> 0
GROUP BY IPLINENO
SELECT BidItemsInformation."Line Number",
BidItemsInformation."Section Number",
BidItemsInformation."Item Number",
BidItemsInformation."Description",
BidItemsInformation."Unit",
BidItemsInformation."Quantity",
BidItemsInformation."Engineers Unit Price",
BidItemsInformation."Engineers Estimate",
BiddersInformation."K020:: Unit Price",
(BidItemsInformation."Quantity" * K) "KGM CONTRACTORS INC",
BiddersInformation."H438:: Unit Price",
(BidItemsInformation."Quantity" * H) "HOFFMAN CONSTRUCTION COMPAN",
BiddersInformation."U010:: Unit Price",
(BidItemsInformation."Quantity" * U) "ULLAND BROTHERS INC",
BiddersInformation."G110:: Unit Price",
(BidItemsInformation."Quantity" * G) "GLADEN CONSTRUCTION INC",
BiddersInformation."H530:: Unit Price",
(BidItemsInformation."Quantity" * H1) "HOOVER CONSTRUCTION CO"
FROM BidItemsInformation,BiddersInformation
WHERE BidItemsInformation."Line Number" = BiddersInformation."BLine Number";
Line Number Section Number Item Number Description Unit Quantity Engineers Unit Price Engineers Estimate K020:: Unit Price
0010 0001 2011601/00003 Construction Surveying LS 1 143,000 143,000 75,000 75,000 67,080 67,080
0013 0001 2013601/00010 Survey Equipment LS 1 25,000 25,000 25,000 25,000 30,000 30,000
0020 0001 2015601/00030 Blast Monitor/Survey LS 1 50,000 50,000 30,000 30,000 35,000 35,000
0030 0001 2021501/00010 Mobilization LS 1 382,250 382,250 809,000 809,000 704,000 704,000
0040 0001 2021602/00010 Well Survey EACH 60 500 30,000 2,150 129,000 1,600 96,000
0050 0001 2031501/00040 Field Office Type D EACH 1 6,367 6,367 4,000 4,000 25,000 25,000
sub total:
1610 0002 2401501/01143 Structural Concrete (1a43) C Y 46 350 16,100 408 18,768 400 18,400
1620 0002 2401501/01362 Structural Concrete (1c62) C Y 68 200 13,600 204 13,872 200 13,600
1630 0002 2401501/03643 Structural Concrete (3y43) C Y 60 600 36,000 592 35,520 580 34,800
1640 0002 2401512/03633 Bridge Slab Concrete (3y33) S F 1,876 24 45,024 28 51,778 27 50,652
1650 0002 2401521/00030 Structure Excavation Class R C Y 17 125 2,125 1,000 17,000 500 8,500
1660 0002 2401541/00010 Reinforcement Bars LB 2,490 2 3,735 1 3,312 1 3,237
1670 0002 2401541/00011 Reinforcement Bars (Epoxy Coated) LB 12,380 2 18,570 1 17,703 1 17,332
1680 0002 2401601/00010 Structure Excavation LS 1 2,500 2,500 2,000 2,000 5,000 5,000
1690 0002 2402583/00020 Ornamental Metal Railing Type Special L F 284 150 42,600 194 55,096 190 53,960
sub total
1820 0003 2401513/00346 Type Curb Railing Concrete (3y46) L F 135 25 3,375 16 2,093 15 2,025
1830 0003 2401513/07447 Type Mod P-4 (Tl-4) Railing Conc (3y46) L F 302 85 25,670 72 21,593 70 21,140
1840 0003 2401541/00010 Reinforcement Bars LB 14,780 1 18,475 1 13,598 1 13,302
1850 0003 2401541/00011 Reinforcement Bars (Epoxy Coated) LB 76,720 1 103,572 1 85,926 1 84,392
1860 0003 2401601/00010 Structure Excavation LS 1 10,000 10,000 116,000 116,000 115,000 115,000
1870 0003 2402583/00020 Ornamental Metal Railing Type Special L F 132 150 19,800 184 24,288 180 23,760
sub total
totalYou can accomplish that using decode with the grouping function. It returns 1 when that column passed as argument was grouped (or is in some total) and 0 otherwise.
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> with t as
2 (select 'New York' city, 'US' country, 1 num from dual
3 union all select 'Los Angeles' city, 'US' country, 2 num from dual
4 union all select 'London' city, 'GB' country, 2 num from dual
5 union all select 'London' city, 'GB' country, 2 num from dual
6 union all select 'London' city, 'GB' country, 7 num from dual)
7 select decode(grouping(country), 0, country, 'GRAND TOTAL') country,
8 decode(grouping(city), 0, city, decode(grouping(country), 0, 'SUBTOTAL')) city,
9 sum(num) num_total
10 from t
11 group by rollup(country, city)
12 /
COUNTRY CITY NUM_TOTAL
GB London 11
GB SUBTOTAL 11
US New York 1
US Los Angeles 2
US SUBTOTAL 3
GRAND TOTAL 14
6 linhas selecionadas.
SQL> -
How to create a sub menu for the transaction se38
Hi All,
I have created menu item in se38 using menu exit.
By using the enhancement SEU00002 .
That menu item is displayed under utilities menu bar.
But i am unable to create sub menu for that.
My requirement is to create sub menu to the custom menu item.
How can we create a sub menu to the transaction se38.Hi,
it looks like that user exit SEU00002 offers only one extra function +CUS. This function then calls FM EXIT_SAPMS38E_010. Hence I do not think that it is possible to create sub menu with this user exit.
Anyway you can try to modify SAP standard. You need to modify menu for SE38 and then add your code for handling new function codes. You can easily find where you will have to add your code for handling functions from your sub menu. You just need to look for usages of the FM EXIT_SAPMS38E_010.
Cheers -
How to create a persona header bar that displays correctly in all resolutions - Firefox 20 Linux
I'm in the process of learning how to create Personas for Firefox, and have already created one which I am using locally, but I ran into an unexpected behavior: If I create a header bar that is 3000 X 200 pixels as specified in the guidelines, only the right third or so displays in my browser when the theme is applied. To get this header to display "properly" (as I find aesthetically pleasing) I have to resize the header to 1280 X 85 pixels.
Should not the header bar scale automatically, or do I need to produce a persona header at each possible resolution width to get it to display properly?
For what it's worth, the footer appears to be displaying the left hand third, but this is not so objectionable in this case.
A screenshot of the persona is available at http://www2.netdoor.com/~horus/Persona_2013-04.png.
Thanks for any insights. I feel as though I must be misunderstanding something here.
(I tried to post troubleshooting information the first time, but it overflowed the character limit...)Probably best to ask that sort of question, or research the answer in one of the AMO forums ('''A'''ddons '''Mo'''zilla). I think this one may be appropriate:
* https://forums.mozilla.org/addons/viewforum.php?f=30
** I think you will need to register before posting
I am wondering where are you doing the learning ?
<br />There are also resources on MDN
*https://developer.mozilla.org/en-US/addons
Detailed discussion of the subject is probably off topic for this forum, but linking to resources or giving as imple answer is not so I hope some of the above are helpful. (You may even find someone else interested and knowledgeable posting a direct answer) -
How to create a Sub case in Adaptive case management.
Hi,
Can you please provide an example or more info about creating a sub case in Adaptive case management.
Documentation says
"Sub cases are deployed as a separate composite from the parent case project. They are linked to the parent using the case link mechanism. The sub case composite version is always the active version of the parent composite". This is exactly what I want.
I created a Sub Case following the steps mention in the documentation. It created it under the case activities. I want to know how to link it to a process or composite. In the advance section it specifies a project name and case name. How do I link it? Please help me with an example on how to create sub case.
ref:- https://docs.oracle.com/middleware/1213/bpm/bpm-develop/case_mgmt_bpmpd.htm#BPMPD87407
Thanks
AnilOn the Case UI within BPM workspace there should be a place to link cases.
Also have you looked at the following API ICaseInstanceService (Oracle Fusion Middleware BPM-Services Java API Reference for Oracle BPM Suite)
oracle.bpm.casemgmt.ICaseInstanceService
addCaseLinkboolean addCaseLink(IBPMContext context, CaseLink caseLink) throws CaseServiceExceptionAdd a case link
Parameters:
context - an IBPMContext value
caseIdentifier - a CaseIdentifier value
caseLink - a CaseLink value
Returns:
a boolean value
Throws:
CaseServiceException - if an error occurs -
How to create PR using T.code CJ20N
Dear all,
I am a MM guy, i want to test the scenario in my IDEAS system
how to create a PR with CJ20N t.code,based on that i want to create PO to vendor please provide me detials steps .
Please consider me as a Enduser
if any documentation please send to svgk111@gmail
points will be rewarded
Regards
venu gopal
Edited by: venu kk on Jun 26, 2008 7:35 AMHi Venu,
Reply given by Rahul Tyagi is correct. Another way to get PR thru CJ20N is :
Open CJ20N , Open your Project by clicking onto the Open Icon --> Click on the network --> Put the description of the PR in the description field > Put WBS element in the WBS element field by taking the columns to the right hand side.> Select the particular line item --> Click on to the Component Overview icon at the bottom --> Put your MM into the Material Field --> Put the requirement qty. -->Now select the item category as L for Stock Item and N for Non Stock
item , then one POP UP window will appear --> Select " Third Party Order" --> Then put your customer number and press enter --> Save the document.
Now , again open CJ20N and select the particular Activity ---> select the material component attached to that activity and on the right hand screen you can see the PR number.
Hope this will also help you
Regards,
Dhruv Kumar Malhotra -
How to create a Sub Menu?
I know it can be done. But just can't find how to do a
submenu that shows when you roll the mouse on main menu, and hides
if your mouse is anywhere else. I can imagine that I can create the
sub-menu with a movie clip symbol containing each command or choice
as a button. But waht I don't know it how to keep it hidden and to
make it only shown when you point the main menu that should
activate ths sub menu.
Thanks for your helpYou can use click events on the main menu to trigger the
submenus and then use rollOver events to know which submenu to show
and which to make invisible. -
How to creat multiple sub VIs'
I have a VERY large VI that finaly crashed due to the large size. What is the best way to create "Sub VIS"? I have almost 800K of code. Should I create all the sub vis and then add them to my Project? I want the program to call the sub vis automaticaly.
Thanks
PhilipHi Philip,
Backups:
As Lynn (johnsold) said, local backups are a minimum requirement.
A service like Dropbox is better in case of computer crash.
Note: Temporarily disable Dropbox syncing when doing builds in a Dropbox folder as this may cause builds to fail.
The best solution is true source control like the free TortiseSVN.
For sub vis I suggest:
Identify code sections that perform one specific function. This makes a logical sub vi. If you can easily come up with a name to describe the
section (like "Parse Input String" for example) then you are on the right track. With some practice you will be creating sub vis that can be used
in other programs and save you time in the future. This is a good reason to NOT include unrelated code in a sub vi just because it will fit.
Take note of the number of inputs and outputs in the code section. Ideally you want a small number of inputs and the same for outputs (3 or 4). Use clusters to reduce the number of I/O items.
Standardize on a connector pane layout - this makes wires line up better. The 4224 pattern works well. When LabVIEW creates sub vis it only creates the number of inputs and outputs that are required. So you will normally have to change the connector pattern and rearrange the controls and indicators every time you create a sub vi.
Include error in and error out in their standard places even if you don't need them for the particular application. When you use that sub vi later
you may need them.
Good practice is to use Type Defines for controls and indicators that go to more than 1 place. In your case, it is a jugement call if it is worth the trouble to do this on an existing program. Once you start using sub vis more, Type devs become very important. If you don't use them, changing a data structure will require manually changing every sub vi that uses that data structure.
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help. -
How to create a new company code and how to assign it to billing units?
i am working on roll out project.....please help me in creating a new company code....
Hi,
You have raised this query in wrong Forum. Please raise ur query in the relevant forum.
rgrds,
Randhir Soni -
How to create 2 lines header in Report painter
Hi. I am not good at Report painter. I want to create 2 lines header in Report painter just like SAP std report.
When I create a new form, I only have one line header form but cannot add additional header line.
I am looking at the 0SAPFS10-01 Trans.Fig.- Balances. which has two header lines
Debit Credit Balance Accumulated Balanc
Periods &1FY &1FY &1FY &1FY
I can create only one header just like
Periods Debit Credit Balance Accumulated Balanc
cannot add additional line for
&1FY &1FY &1FY &1FY
please advise me
thanks in advance.In report painter you can select variouselements based on which the data will be pulled. I haven't seen any report painter with two header lines and don't think report painter allows that. But for your requirement I believe you can select the periods in the header line itself.
Maybe you are looking for
-
Error while addind A/R Creditmemo
hi Experts , while adding A/R Credit memo the document was not getting added and throwing an error as ' reconsilation date must be on or after the last posting date for transaction selected for reconciliation [Message 3821-3]'
-
We have Novell ZENWorks 7 installed and ConsoleOne running on Windows. Is it possible to remotely manage *multiple* workstations at a time? When multiple workstation objects are selected, ConsoleOne only gives "Remote Wakeup" as an Action. Regards, M
-
How to show all items in a ComboBox when open
Hi there, I have a combobox, with about 8 items from an array. I am trying to have it open and show all the items to the user without scrolling. Anyone know how to do this? Thanks!
-
Adobe Audition 3.0 Problems
Kind of Long - Windows XP SP3 I play guitar and bass guitar, and want to record them. I have my guitar connected to a ZOOM G1N Multi FX Pedal. The OUTPUT cable from the pedal is then connected to my computer at the LINE IN jack. My headphones come fr
-
Hi Friends Is XI required if CCM on diff server and SUS with ROS on diff server. Regards Simha