How to create customer with bapi

hi i want to create customer through bapi which facilitates to enter customer code(our own defined not the sequentially next no.)
i have gone through F.M BAPI_CUSTOMER_CREATEFROMDATA1 BUT NOT ABLE TO UNDERSTAND HOW TO INPUT PARAMETER FOR CUSTOMER_CODE.
PLEASE GUIDE ME IF ANY ONE AWARE ABOUT THAT.
THANKS

Moderator message - Welcome to SCN.
But please search the forum before asking a question. This has been discussed many times before. Also read the BAPI documentation - thread locked.
Also, Please read Please read "The Forum Rules of Engagement" before posting! HOT NEWS!! and How to post code in SCN, and some things NOT to do... and [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers] before posting again.
Rob

Similar Messages

How to Create Customer by BAPI or by Function Module

Hi all,
I am new to this forum...
Please can anyone tell me how to Create Customer by BAPI or by Function Module.....?
I have tried many of the function modules posted in the threads.. but it couldn't help me out...

> The only official solution is batchinput and idoc (CREMAS).
Note that when an IDoc exists, it is often possible to call the function module that is just behind it (see WE57 transaction). SAP would not support that direct call, but if you need to contact SAP support about an issue, you can create the IDoc manually and there's no reason that this issue doesn't arise.
The only difference with the IDocs is that you don't have any IDoc stored in the database, and even no log in database (so you won't be able to see anything in WE02, etc.).
Note that it is important to know if this function module does a database commit or not: you can look at the BDFG transaction (I assume there's no BAPI related as it is the initial assumption of my post) to see if IDoc packet processing is allowed or not: if packet processing is allowed, there's no database commit in the function module, otherwise there's one.

How to create SynBO with BAPIs from R/3 server?

Hi,
Can I get any documents or links regarding Syncbo creation with BAPIs from another R/3 server. I think I have to create RFC destination for this. The steps for creating RFC destination in Netweaver 2004s is also helpful for me.
Also I need the required configurations also.
Regards
Shemim

Hi Shemin,
Refer the following link for Mobile Development Kit
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eba3a7-0601-0010-b982-92f1fca3258a
This will provide you with rules of creating BAPI wrappers and sample BAPI wrappers.
For creating RFC destination, contact your BASIS team member. You may not rights to do it by yourself. They will also tell the exact prodecure. It start with transaction SM59.
Regards,
Rahul

How we create custom infotype and how to configure with its subtypes.

hai abap-hr gurus,
how to create custom infotype and how to configure with its subtypes. when i am creating infotypes i am not getting how to configure subtypes.
plz help me for this with an example code.
thanks..
kiran kumar

Hi Kiran,
Please fallow the below steps to create the custom infotype. If you have any quires let me know.
For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
then select the `Employee Infotype' radio button
after that select the `PS Structure Infotype'
then click on Create A separate table maintenance window appears
then Create a PS structure with all the fields you want on the infotype
Save and Activate the PS structure
now Go back to the initial screen of PM01
Click on `All' push button. It takes a few moments
Click on `Technical Characteristics. Infotype list screen appears
Click on `Change'(pencil) button
Now select your Infotype and click on `Detail' (magnifying glass) button
Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
Give your subtype field as subtype field & Save and come back to PM01 initial screen
Click on `Infotype Characteristics' Infotype list screen appears
Click on `Change' (pencil) button & on New Entries
and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
to fill yours). Now save ur entries
Now the Infotype is created and ready to use.
If you want to change the layout of the Infotype as per your
requirement
In the PM01 initial screenSelect `Screen' radio button and give
2000 as the screen name, then click on edit.
In the next screen.. Select `Layout Editor' and click `Change'.
Screen default layout appearshere you can design/modify the
screen..change the attributes of the fields..etc.
Save and activate. (Don't forget to `Activate at every level)
Regards,
Ramakrishna kotha.

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

How to create custom content placeholder in sharepoint 2013

Hi, I would like to create custom content placeholder don't know how to and add to my custom master page in sharepoint 2013. I have no luck searching on how to create custom content placeholder, any help?
Thanks,
Johnweb

Hi,
If you’re not fixed your requirement with the Out of the box SharePoint place holders, you can create as many as you want as long as the ID doesn’t conflict. On the master page add the content place holder
<asp:ContentPlaceHolderid="CustomName" runat="server"></asp:ContentPlaceHolder> and add this to your page layout
<asp:Contentrunat="server" ContentPlaceHolderID="CustomName"></asp:Content>.
I suggest you provide your basic requirement for further research.
If you want to customize a master page, the Rajendra's method would be helpful.
Best Regards,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to create custom report plugin using child region report metadata

Hi,
I want to ask for help on how to create custom report plugin using child region report metadata. My idea is to create a child region, a classic report and set the condition to never.
Then i will query the child report metadata from apex view and use it to create a custom report like using jquery jq-grid. Any idea how i can create a process that will use the child report
metadata? I dont know how i can create a process just like how apex work, how apex render report, coz i want it to be control using the standard apex report attribute. This plugin will
render according to the child report attribute.
Is there anybody here had ever done this?

Hi Nicolette,
Thanks for the reply. I know where to find the metadata, just asking for idea on how the rendering process will be.
Start from determining column heading, column order until finish rendering the report. The same way how apex
render the classic report.
Previously this imy my rendering process:
FUNCTION GETCOLUMN(P_REGION IN APEX_PLUGIN.T_REGION,
                     P_PLUGIN IN APEX_PLUGIN.T_PLUGIN,
                     P_VALUE IN VARCHAR2) RETURN SYS.DBMS_SQL.DESC_TAB2 IS
    VSQLHANDLER     APEX_PLUGIN_UTIL.T_SQL_HANDLER;
    VCOLCOUNT       NUMBER;
    VCOLNAMES       VARCHAR2(2000);
    VAJAXIDENTIFIER VARCHAR2(100);
    VPAGESIZE       TYPEATTR := P_REGION.ATTRIBUTE_04;
    VJSCODE         VARCHAR2(32767);
BEGIN
    VSQLHANDLER := APEX_PLUGIN_UTIL.GET_SQL_HANDLER(P_SQL_STATEMENT => 'select * from s_emp',
                                                    P_MIN_COLUMNS    => 1,
                                                    P_MAX_COLUMNS    => 999,
                                                    P_COMPONENT_NAME => P_REGION.ID);
    VCOLCOUNT := VSQLHANDLER.COLUMN_LIST.COUNT();
    FOR I IN 1 .. VCOLCOUNT LOOP
      VCOLNAMES := VCOLNAMES || '{name: "' ||
                   UPPER(VSQLHANDLER.COLUMN_LIST(I).COL_NAME) || '",';
    END LOOP;
    APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
    RETURN VSQLHANDLER.COLUMN_LIST;
EXCEPTION
    WHEN OTHERS THEN
      APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
      RAISE;
END GETCOLUMN;
So this is how i get the header for my report plugin. The same method is use to get the value / data for each column. This process is work. So now
i want to extend my plugin so that i will use all attributes from the child report to render my plugin. So the column header, column order, all will depend
on the child report. And the column display condition is set, it will also check the condition before render the column. Sounds like i want to reinvent
the normal apex rendering process but this is what i want to achieve.
I need help to find the correct logic for my render process. Don't want too much for starting, just want to render the plugin correctly, same with child report,
same columns alias, column ordering and column conditional display.
Thanks,
akulala

Create Customer with Account group ZO05 to BP

Dear RE Experts,
In my project there are three scenarios related to BP and Customer.
1) Create BP with Account Group Zo05 to Customer (Which is Working)
2) Create Customer With Account Group Zo05 to BP
3) Create only Customer (No BP) With Account Group ZO01,ZO02,ZO03,ZO04,ZO06 and ZO07
I want help from Experts how to create last two scenarios in RE? What configuration is need?
What is Tcode to create only customer?????
Thanks in Advance...
Manzoor

Hi,
Goto SPRO\Cross-applications components\master data synchronization\synchronization control
check whether is it activated from cutomer --> BP
And also check the following setting
Goto SPRO\Cross-applications components\master data synchronization\customer&vendor integration\business partiner settings\settings for customer intration\define BP role for direction customer to BP
might be it will give some solution to your 2nd problam and finall fir 3rd issue you can use XD01 to create customer and don't assign these account groups in "Define BP role for direction customer to BP"
Srini

How to create custom reports.

Hi ,
Could you please let us know how to create custom reports which are data based and not analytics. Which is the best method , is it to devlop reports in sites or integrate with OBIEE reports. could you please let us know the best practices for this approach.
Thank you,
Sashank P.

Hi Jiri ,
Thanks a lot for your support. Below are my answers for the request:
1) what data you want to report on? Is it data from a database? file system? Web service outputs?
Ans : The Data would be mostly from Database only.
2) what is the overall purpose of your solution?
Ans: The overall purpose of this solution is to generate reports with sorting capability and should be able to export in different format documents.
3) what is your architecture?
Ans :
4) why Sites?
Ans: The customers login into our site and can be able to view the different reports and the present site is already a webcenter site. and the reporting capability is an enhancement .
Can you please provide the right approach here. We have an option of using ADF or even we can use Webcenter Portals. So which would be the best approach to go. And can you please guide us any approach or examples for integrating Webcenter Portals and Sites and even integrating ADf with Sites.
Thank you,
Sashank P.

Create Customer with reference

Hi,experts
We want to create customer with reference.
Use the t-cd:XD01 and put a customer code at reference area.
But can't copy the company name,Search term 1/2,Street address.
How can I copy that data??
Or can't copy these data??
Regards,
Saeko

Dear,
       For Any Two company, There are not possible to same name, same address. That's why system do not get the company name,Search term 1/2,Street address.
       You can enter manually this data at the time of creation of XD01.
       Hope it will help you.
Regards,
Sandip

How to create customer master data for walking customer in retail

hi experts !!!!!!
for retail industry e.g books trading industry
how to create customer master data for walking customer in retail
its dummy or one time customer
if i create one time customer then same customer number can i use for every new order and every new customer how ?????
thanks

Dear Hanumant,
As per my view,,
You can use one time customer functionality to full fill your requirement.
When you create sales order with one time customer system take you to the customer data maintanence screen through that you can maintain the one time customer data.
Same one time customer number you can use for every new order through maintaining different data.
I hope this will help you,
Regards,
Murali.
Edited by: Murali Mohan.Tallapaneni on Dec 19, 2008 6:08 AM

How to create custom member in excel BPC report?

Hi Everyone,
Hope you are doing good!!
I have bit confusion on custom member and how to create custom member in excel bpc report.
Can you please explain me on this with example.
Thanks,
Amit

Hi Amit,
Take look at below thread might be helpful for you.
Refer page no 206
https://help.sap.com/businessobject/product_guides/boeo10/en/EPMofc_10_user_en.pdf
and
Best Practices For Reporting Against SAP Business Planning and Consolidation (Powered by SAP HANA), utilizing the EPM Ad…
Hope this will help you

How to create program for bapi?

hi all,
how to create program for bapi?
reply me soon now.....
can anybody help me.....
thanks,
S.Suresh.
Title was edited by:
Alvaro Tejada Galindo

Hi ...Here is the step by step procedure for creating BAPIs.
There are 5 different steps in BAPI.
- Create BAPI Structure
- Create BAPI Function Module or API Method.
- Create BAPI object
- Release BAPI Function Module.
- Release BAPI object.
Step1. Creating BAPI Structure:
- Go to <SE11>.
- Select Data Type & Enter a name.
- Click on Create.
- Note: Always BAPI should be in a development class with request number (Not Local Object).
- Select Structure & hit ENTER.
- Enter the fields from your database. Make sure that the first field is the Primary Key Field.
- Then SAVE & ACTIVATE.
Step 2. Creating BAPI module:
- Enter TR.CODE <SE37>.
- Before entering any thing, from the present screen that you are in, select the menu
Goto -> Function Groups -> Create Group.
Enter a name (Note: This name Must start with ZBAPI)
Let this screen be as it is and open another window and there, enter TR.CODE <SE80).
Click on the Third ICON that says Inactive Objects.
Select the group that you just created and click on Activate.
Notice that the group you created will disappear from the list of inactive objects.
- Go back to ><SE37> screen and enter a name and hit <ENTER>. Then enter the group name that you just created and activated.
NOTE: When you release a function module the respective group will be attached to that particular application. It cannot be used for any other application. NEVER include an already existing group that is attached to another module.
Now click on the first Tab that says [ATTRIBUTES] and select the radio button that says remote-enabled module since we will be accessing this from any external system.
Then click on the second tab that says [IMPORT].
Enter a PARAMETER NAME, TYPE and the structure you created in the first step. Also select the check box Pa. All remotely enabled functional modules MUST be Pa enabled, where Pa means Passed by Value and if you dont select Pa, then that means it will be passed by reference..
Then click on tab that says [EXPORT].
Enter the following as is in the first three fields
RETURN TYPE BAPIRETURN (These 3 field values are always same)
Here also select Pa meaning Pass by value.
Note: BAPIRETURN contains structure with message fields.
Then SAVE and ACTIVATE.
Step 3. Creating BAPI object:
- Enter Tr.Code <SWO1> (Note. It is letter O and not Zero).
- Enter a name and then click on create. Enter details.
NOTE: Make sure that that Object Type and Program name are SAME.
- Enter Application M, if you are using standard table Mara. If you are using your own database then select Z at the bottom.
- Then hit <ENTER>.
- Now we have to add Methods. High light METHODS and then select the following from the menu:
Goto Utilities -> API Methods -> Add Methods.
- Enter function Module name and hit <ENTER>.
- Select the second FORWARD ARROW button (>)to go to next step.
- Check if every thing looks ok and again click on FORWARD ARROW button (>).
- Then select YES and click on <SAVE>.
- Now on a different screen goto TR.CODE <SE37>. Enter Function Module name and select from the top menu Function Module -> Release -> Release.
- Goback to TR.CODE <SWO1>.
Here select the menu combination shown below in the same order.
- Edit -> Change Release Status -> Object Type Component -> To Implemented.
- Edit -> Change Release Status -> Object Type Component -> To Released.
- Edit -> Change Release Status -> Object Type -> To Implemented.
- Edit -> Change Release Status -> Object Type -> To Released.
- Then click on <SAVE>.
- Then click on Generate Button (4th button from left hand side looks like spinning wheel).
- Then Click on the button that says PROGRAM to see the source code.
To check if this is present in work flow goto TR.CODE <BAPI>.
Here it shows business object repository.
- First click on the middle button and then select ALL and hit ENTER.
- Goto tab [ALPHABETICAL] and look for the object that you created. This shows that the BAPI object has been created successfully
Overall Info :
http://help.sap.com/saphelp_47x200/helpdata/EN/00/32a43697bc11d1acf9080009b0fb56/frameset.htm
BAPI Creation Info :
http://help.sap.com/saphelp_47x200/helpdata/EN/e0/9eb2370f9cbe68e10000009b38f8cf/frameset.htm
Reference :
http://help.sap.com/saphelp_47x200/helpdata/EN/00/32a43697bc11d1acf9080009b0fb56/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/EN/00/32a43697bc11d1acf9080009b0fb56/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/EN/e0/9eb2370f9cbe68e10000009b38f8cf/frameset.htm

How to create complaints with reference to ECC Billing document (CRM 7.0)

Hi experts!
I use ECC 6.0 and CRM 7.0.
I have to create CRM complaints (ZCLR - CLRP) with reference to ecc billing documents.
I read the following topics and help:
1. How to create complaints with referenceto ECC Billing document
2. Re: How can we transfer billing documents from SAP ERP to CRM 2007?
3. http://help.sap.com/saphelp_crm70/helpdata/en/46/029ba32e675c1ae10000000a1553f6/frameset.htm
Made these settings:
1. Define the Business object type
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Define Object types for Transaction reference
2. Assign Business Object Types to Transaction Types
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Assign Business Object Types to Transaction Types
3. Implement a BADI - CRM_COPY_BADI_EXTERN.Check Implementation CRM_COPY_BADI_BILLDO for more information on the coding for referencing the ECC Billing document.
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>BAdI: Create Complaint with Reference to External Transaction.
but still do not know,
1) if I should pre-replicate billing documents into CRM ?
2) Or, the system uses the RFC to find these documents in ECC to create reference?
Please help me.
Best regards Kostya.
Edited by: Kostya Khveshchenik on Oct 20, 2010 2:09 PM

not resolved =(
Edited by: Kostya Khveshchenik on Nov 19, 2010 8:50 AM

How to create custom adapter for Products and CommerceService

Hi guys!
First of all I wanted to say that I did search. Only relevant material I found was this http://dev.day.com/docs/en/cq/5-5/ecommerce/eCommerce-framework.html
Unfortunately it doesn't go in details enough...
I'm trying to follow geometrixx-outdoors example to create my shoppingCart. I have a list of of products in /etc/commerce/products.... referenced by productPage in content.
But I don't know how to create custom CommerceProvider and Adapter to create proper Product objects - it always picks up geoProductImpl.
As I understand I need to specify cq:commerceProvider to myProvider and then I need to somehow register MyProvider so it gets picked up.
Also I guess I need to add MyProductAdapter somehow so when shoppingCart executes following it returns my implementation instead of geoProductImpl.
Product product = productResource.adaptTo(Product.class);
I'd really appreciate if anyone could share an example or point me in the right direction for a guide.
Cheers
Kostya

Hi Kostya,
Look at this presentation recorded at http://dev.day.com/ddc/en/gems/commerce-framework.html
Thanks,
Sham

How to create customer with bapi

Similar Messages

Maybe you are looking for