How to create HRP type infotype ?

Hi All ,
I have an requirement that i have to create (ECC 5.0) a HRP infotype (9330)... and am trying this from PPCJ (Tcode) but am not able to create ...
When am going to create the infotype in PPCJ its giving the message.... <b>' Infotype 9330 cannot be created please look at the log '</b> and under Infotype category am selecting ' Table Infotype '.
Is their any prerequisites to be maintained before creating ?
Please help me ....
Thanks in advance.
Thanks & Regards,
Anil Kumar.

Hi Anil,
Use Transaction PM01. I used this link to create my first Infotype, helped greatly.
http://www.sap-img.com/human/how-to-create-a-hr-infotype.htm
Hope this helps.
Warren

Similar Messages

How to create the custom infotypes in Campus Management

Hi,
Please help me how to create the custom infotypes in campus management.
Thanks,
Lakshmi.

Hi,
Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Enhancement of Infotype
Check the following
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
Infotype Enhancement overview screen
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
Cheers,
vasavi.
kindly reward if helpful.

How to create a type

hi,
can anybody tell me how to create a type where in we can execute a procedure, every time we call it.

Hello,
What is your exact product version ?
Are you sure there is any relation woith the Oracle Forms product ?
Francois

How to create SCD2 type manually in informatica?

Please Can you describe with example how to create SCD2 type manually in infromatica?

Hi Manoj,
You should not delete the auto generated orchestration even do not modify it, as it is stated in msdn.
The BizTalk WCF Service Consuming Wizard creates in your BizTalk project the BizTalk schemas and types necessary to consume WCF services. The BizTalk types such as port types and multipart message types are created in an orchestration. We recommend
that you do not modify the orchestration that the wizard creates. Instead, you can add new orchestrations in the BizTalk project for your purposes.
--------- MSDN
For Refernce
In your solution, if you are seperating your schemas project from orchestration project, in that case i personally advise to generate wcf endpoint in your schema project and after adding schema reference in orchestration
project you manually create the multipart message and a request response port as it will not display in existing port.
Regards

How to create Activity type

How to create Activity type
below are the details
x sales MnF Expenses
y FMS MnF Expenses

dear sudhir
KA01 - Create Primary Cost Element for the new activities type.
KL01 - Create Activity Type tied to the primary cost element.
regards
rohit

How to create output type for GR,GI?

Can any one explain,How to create output type for Goods Receipt,Goods Issue.?
and How to take print out for both?

Hi, jayant in standard u have output type for picking list, delivery doc complete, theres no output type seperately for PGI or PGR
I am sure u need the help of tech guy to create the new output type for ur requirement
regards
giri

How to create document type ?

Hi experts
We need assign document type to mateiral in material master. So we need create new document type background. How to create it ? Does it just copy one doc type from spro-> cross application componets-> document management-> define document type? It seems it will also copy the following screen setup .... but dont' know anything else need be setup ?
Thanks
Alice

Hi Alice,
You have create document type from
spro-> cross application componets-> document management-> define document type
There are already standard document types available. You ca use that or copy and create new types and assign it on the material master.
Thanks and regards
Murugesan

How to create calendar type sheet?

Hi,
Does anybody knows how to create a calendar like sheet?
I think there is a function that automatically put the dates into the header but I cannot find it.
I really don't want to write down each day from now to next year...
Thanks to anybody that can help me.

I found it,
Just type the first 2 date and select both of them, Click on the little white button that appears at the bottom right and drag it down... All the following dates come.

How to create movement type

hai sap gurus,
can u clarify my problem,
how to create a movement type and where we assign that movement type to gl account
clarify please

Hi Ram,
You can create Movement type in OMJJ transaction by Copying the existing mvt types. Once you copy the mvt type all the details from the existing mvt type will be copied to new mvt type.
Based on the Account grouping the system will identify the G/L accounts. You can check this OMJJ transaction you will get better idea.
One more thing why you need the new mvt type, if it is really required then go for new mvt type otherwise use the SAP standard Mvt type which will serve all the purposes.
rgds
Chidanand

How to create PDF type of ivews in portal using the standard SAP template

Hi,
I have to create PDF type of ivew in the portal, I am trying with URL type of ivew but it is not taking " %" in URL type of ivew.
Is there any other template availabe to create pdf type of ivews or how to create these pdf type of ivews in portal.
Please help me out .
Thanks,
Manasa.

Hi Manasa,
You can do that by simply removing the special character "%" (in ur case) and providing " "(blank space) in its place.
Please refer to this link: [http://help.sap.com/saphelp_nw70/helpdata/en/2f/84e378f6244113b0816b5d00cd3747/frameset.htm]
Hope this helps !
Regards,
Nishant Singh

How to create table type in SAP3.1i ?

Hi Friends,
Is it posible to create table type in SAP 3.1i server ?

Hi amit,
I think there were no table types in 3.1i. Still you can define a structured table, i.e.
DATA: BEGIN OF SORT_SPFLI OCCURS 100,
        CARRID   LIKE SPFLI-CARRID,
        CONNID   LIKE SPFLI-CONNID,
        CITYFROM LIKE SPFLI-CITYFROM,
        CITYTO   LIKE SPFLI-CITYTO,
        SFLIGHT LIKE SORT_SFLIGHT OCCURS 100,
      END OF SORT_SPFLI.
You can use field-symbols, but no loop assigning.
What is it you want to do?
Anyway: Have fun with good old 3.1 - I put my old docu CD in the trash recently.
Regards
Clemens

How to create a type table in designer 9i

Hi
In our company we use designer 9i. I want to create a type table using designer. Is it possible? I have a requirement where i need to create a type table and use in creating a view through designer.
Create or replace type varchar2_ntt as table of varchar2(4000);
[\pre]
Please suggest.

Hi
Here I am giving the step by step process.
1. select the container in which container you are going to create the type.
2.Go to tools then design editor and expand the container. There you will find oracle collection types. there we have to create a new one by clicking the + button on the left side.
3. Give the name of the new collection type.
4. And in the collection of tab, let it be scalar, give the scalar data type,and the size and click finish.
5. then right click on that object and give generate. there you select theDDL files only and the give the path where the scripts have to go.
This the process.
Thanks,
raju

How to create this type of Form?

Hello ,
I'm new to java so I would like a hint from experts on how to create such a form :
A form that displays Customer's Codes and their name from Oracle database , so that they appear in the form as a list of 2 columns , what kind of compnents I should use to display this kind of data ? JTextField ? I dont think so .... . And also I would like to highlight each other line so that the list looks good , then at the top of the list I want a filter so that the data is filtered each time I enter a character . The last thing is how to make the data displayed have the ability to be dragged to another form in the application so that it fills the corresponding fields relative to the data dragged ?
Too much ha? . Please just provide hints/ideas about each point as I know it can be time consuming to give details about all this.
Thanks in advance...

Thank you , I tried with this code to achieve what I wanted but I get no result .
Can you please tell me whats wrong with this code ?
package desktopapplication1;
import java.sql.*;
import javax.swing.*;
import java.awt.*;
public class MainOMSWindow extends JPanel{
    public MainOMSWindow ()
        super(new GridLayout(1,0));
JTable customerListTable = new JTable();
customerListTable.setPreferredScrollableViewportSize(new Dimension(500, 70));
customerListTable.setFillsViewportHeight(true);//to make the table uses the entire height of the container
    JScrollPane pane = new JScrollPane(customerListTable);
    add(pane);
    populateTable(customerListTable);
    private static Connection getConnection()
    Connection con = null;
     try
        String driverName = "oracle.jdbc.driver.OracleDriver";
        Class.forName(driverName);   //registering JDBC Driver
        String serverName = "localhost";
        String portNumber = "1521";
        String sid = "mydb";
        //jdbc:oracle:thin:@localhost:1521:ahmaddb
        String url = "jdbc:oracle:thin:@" + serverName + ":" + portNumber + ":" + sid;
        String user = "fundinfo";
        String pw = "tadapps";
        con = DriverManager.getConnection(url, user, pw);
     catch (ClassNotFoundException e) {
                                    System.out.println(e.getMessage());
                                    System.out.println(e.getStackTrace());
                                    System.out.println(e.getCause());
                                    System.out.println(e.getException());
                                    System.exit(0);
     catch (SQLException e) {
                              System.out.println(e.getMessage());
                              System.exit(0);
    return con;
    private static ResultSet useConnAndGetData()
        Connection con = getConnection();
    try
         Statement stmt = con.createStatement();
         String select = "select title,year,price from movie order by year";
         ResultSet rows = stmt.executeQuery(select);
         return rows;
    catch(SQLException e) {
             System.out.println(e.getMessage());
        return null;
    private static void populateTable(JTable table)
        try{
    ResultSet rs = useConnAndGetData();
    while(rs.next())
public void setValueAt(object value, int row, int column)
Value: The new value to be placed in the cell
row: The row in the JTable to be changed
column: The column in the JTable to be changed
* rows and columns start at the number "0", not "1".
* Notice that the first column in a result set is column "1".
     int row = 0;
     table.setValueAt(rs.getString("title"),row,0);
     table.setValueAt(rs.getInt("year"),row,1);
     table.setValueAt(rs.getDouble("price"),row,2);
     row++;
        catch(SQLException e)
         System.out.println(e.getMessage());
        private static void createAndShowGUI() {
        //Create and set up the window.
        JFrame frame = new JFrame("OMS");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        //Create and set up the content pane.
        MainOMSWindow newContentPane = new MainOMSWindow();
        newContentPane.setOpaque(true); //content panes must be opaque
        frame.setContentPane(newContentPane);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
    public static void main (String [] args){
    createAndShowGUI();
}The programe throws this :
Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: 0 >= 0
        at java.util.Vector.elementAt(Vector.java:427)
        at javax.swing.table.DefaultTableColumnModel.getColumn(DefaultTableColumnModel.java:277)
        at javax.swing.JTable.convertColumnIndexToModel(JTable.java:2553)
        at javax.swing.JTable.setValueAt(JTable.java:2719)
        at desktopapplication1.MainOMSWindow.populateTable(MainOMSWindow.java:99)
        at desktopapplication1.MainOMSWindow.<init>(MainOMSWindow.java:24)
        at desktopapplication1.MainOMSWindow.createAndShowGUI(MainOMSWindow.java:119)
        at desktopapplication1.MainOMSWindow.main(MainOMSWindow.java:130)
Java Result: 1
BUILD SUCCESSFUL (total time: 1 second)

How to create a PA infotype through IMG

Hi,
I am not able to create a PA infotype using PM01. I am working on IDES and it gives me a message saying 'you are not a developer" when I use PM01. I know you can create an infotype through IMG, would anyone have the process of doing that. Any help is so much appreciated.
thanks in advance.
Angelina.

Hi,
Ask your basis guys to give Authorisation for PM01.
Infotype creation is generally done by technical consultant.
Hope this will solve your issue.
Regards,
Manoj

How to create table type

I have created table type like this..
type type_cname_tab is table of varchar2(20)
index by binary_integer;
i want to know that only 20 columns are added in this table type..

i want to know that only 20 columns are added in this table type.. Maybe you may change it to a VARRAY type?
Then
SQL> declare
   type type_cname_tab is varray (20) of varchar2 (20);
   cname   type_cname_tab := type_cname_tab ();
begin
   cname.extend (20);
end;
PL/SQL procedure successfully completed.
But
SQL> declare
   type type_cname_tab is varray (20) of varchar2 (20);
   cname   type_cname_tab := type_cname_tab ();
begin
   cname.extend (21);
end;
Error at line 11
ORA-06532: Subscript outside of limit
ORA-06512: at line 6

How to create HRP type infotype ?

Similar Messages

Maybe you are looking for