How to create link on chart report to othere Dashboard page
Hi ,
i have created one dashboard page..in that we have chart report ..when am clicking on chart report it goes to respective dashboard page ..please help me
Hi merago,
This can be achieve with action links. Please refer to http://www.rittmanmead.com/2010/07/obiee-11gr1-action-framework-and-conditions/
Close thread and assign points.
J.
Similar Messages
-
How to create links to different files on the same page?
Good day to all again,
can someone please guide me through creating several links to different files on the same page. In other words, I am creating a photo page where my links are called Gallery 1, Gallery 2, etc... I would like to create links so when the User clicks on Gallery 1, they see Gallery 1 slide show in the frame; when the user then clicks Gallery 2, then they see Gallery 2 slide show in the window.
My slide show files are done and I am using GoLive CS2. I have no knowledge of JavaScript or ActionScript/Flash.
Any suggestions are highly appreciated.
Thank you
AlekHi Diana,
I'm a professional photographer and in the process of getting
my finished site published. I used Coffeecup Photo Gallery. You can
create multiple albums on the same page. Do a Google search for the
address. It's easy, inexpensive, and it works. I tried to do this
with the Photo Gallery in DW and FireWorks--but couldn't get it
right. CC uses Flash and Javascript.
Good Luck -
How to create Links in a cell to other Excel docs Cell in Planning layout
Hi All,
I have a requirement to replace an existing forecasting process using normal Excel with BPS with Excel in place. One difficulty I came across is that the existing Excel input template has cells with links to many other excel files so users does not to open all other Excel documents and copy and paste the figures in.
I am stuck on replicate this function in BPS as I cannot create links to to other Excel directly in a cell in BPS Excel layout. My initial idea is to create a Macro to copy the data across but in deeper thought this might not be the best solution as the number of excel link can be a lot and the name and location of these files might change quite frequently and I cannot hard code it in the macro..
Any ideas?
Thanks.Hi Marc,
The reason to use BPS is once the data is in the layout, we need to run the data in a true forecast / simulation model (i.e. compare actuals, copy data between differnt planning versions, Foreign Exchange rate planning , allocation, revaluation, etc...) on a different hierarchy level.
The problem is the starting point data is scattered in lots of other Excel file from local drives from different users. I guess this is the same reason why the csv file upload technique exist, (i.e. to load data to the layout )but in my case the data location needed to be very dynamic and comes from large / different source of data.
I have now developed a solution to reference data from cells in different Excel sheet to the layout. Once set up, it should be able to save users significant amount of time to bring the base data into the layout, especially if their data is source from many ither Excel files.
Regards,
Danny -
How to create the timeline chart in SSRS 2008
Hello Everyone!!
How to create basic timeline chart with x asix as month and show project start date as marker on this in ssrs reports
Which type of chart i should use and any sample link?
Something like in below link
Timeline
imageHi SonikaJ,
After testing the issue in my local environment, we can enable the Scalar axis option to display a set of axis values on a continuous scale and reset the “Interval” property of the X-Axis. For more details, please see the following steps:
Drag a Column Chart to design surface, insert corresponding fields.
Right click on the Horizontal Axis and open the “Category Axis Properties” window.
Check the “Scalar axis” option, set the “Interval type” to “Months” and set the “Interval” to 1 for example.
Right click on the Vertical Axis and uncheck “Show Axis” option to hide the Y-Axis.
Right-click the series columns to select “Show Data Labels”, then right-click on the Label and select Series Label Properties.
In the Expression dialog box, modify the expression to anything you like.
To adjust the width simply select the appropriate series and go to the properties pane and drill down into the Custom Attributes and find the PointWidth. Then set the value to 0.1 for example.
If there are any other questions, please feel free to let me know.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
How to create WorkBook and Chart
Hi Experts,
Good Morning.
I am facing big problem is How to create WorkBook and Chart in BI 7.0.
My Requirement is following below..............
1. How create work book, then how to add the Company LOGO, End of report footer message.
2. How to Create Chart, then how to design.
Please provide me Solutions Asap, its very critical issue.
Thanks & Regards,
Bharathi.
<Moderator Message: Before posting a question you should read the help as suggested in the answer you got. Additionally I would strongly recommend to read the rules of engagement. Your question violated a few of the rules like a) search the forums before posting; b) read the documentation before posting; c) do not request anything asap, nothing is more important than our own work...>
Edited by: Siegfried Szameitat on Jul 15, 2010 8:25 AMHi
1) Please check the following URL.
[http://www.researchsummary.ca/bw/Sample_Ch10.pdf]
Hope it will help you.
2) Default chart option is available in BEx please check and let me know in case any questions.
Regards
YuvaraajP -
From SharePoint2013 list item data how to create Google Interactive Chart?
HI All,
From SharePoint2013 list item data how to create Google Interactive Chart?
Thanks in advance!Hi,
To push data from list items to Google Chart, we can use JavaScript Client Object Model or REST API to retrieve the data needed.
Here are two links about using JavaScript Client Object Model to access list items:
http://msdn.microsoft.com/en-us/library/office/hh185006(v=office.14).aspx
http://msdn.microsoft.com/en-us/library/office/hh185007(v=office.14).aspx
From the links from the official site of the Google Chart, we can find out the method to populate data into Chart:
https://developers.google.com/chart/interactive/docs/quick_start
https://developers.google.com/chart/interactive/docs/examples#gauge_example
Best regards
Patrick Liang
TechNet Community Support -
How to create the custom charts?
how to create a custom charts? for example the donut shapes, but for the data can be automatically adjust (like a available charts on keynote)
Keynote and Numbers do not have a tool for making Donut Graphs. There are ways to make them using HTML, but I prefer to cheat:
1 Create your first graph as a pie chart and add a circle of solid color to the center
2. If you need more, take a screenshot of the pie chart with the center fill and drag the screenshot into Preview - in Preview > Select Tool (pulldown from Toolbar) > Instant Alpha and remove the inner filled circle and outer fill then Save As > PNG with Alpha
3. Drag your new hollow shape into Keynote. This chart can be placed over another pie chart with a filled center (the fill should match the background)
Not as graceful as a special tool but can get the job done quickly - changing the data requires starting it over since at least one of your donuts my be an image rather than a pie chart with variable data.
Try it. If you need more specific tools, Google Donut Shaped Charts for starts.
Good luck -
How to create Matrix with Group report layout in xml
Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
Period-1 Period-2 Period-3 Period-4
COMPONENT
LABOUR - DIRECT
Actual 1 2 3 4
Actual Rate 10 10 10 10
Standard Rate
Var%
DEPRICIATION-DIRECT
Actual
Actual Rate
Standard Rate
Var%
OVERHEAD - DIRECT
Actual
Actual Rate
Standard Rate
Var%
LABOUR - IN DIRECT
Actual
Actual Rate
Standard Rate
Var%
Thanks in advanceYour friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
> -
How to create user editable Crystal Report with dynamic dataset
What I would like to achieve:
A program loads a report in runtime updates list of database fields (possibly includes sample data), open report in "Crystal Reports 2011" (or 2008) where user customizes report and saves it. Later on the program loads the report, fills actualized data and displays it in .net report viewer.
What I do:
CrReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
CrReport.Load(TemplateFilename)
Dim Results As DataTable
DataTable is filled from a database
CrReport.SetDataSource(mResults)
CrReport.SaveAs(NewReportPath, True)
The NewReportPath is opened in the default program.
What are the problems
The report is open in preview mode (not in design).
When the field is added to the report the designer asks for XML datasource on preview.The short answer is that it is not possible. I broke the question to other two: How to save a report that it opens without preview? and How to create user editable Crystal Report with dynamic dataset, where it is possible to find details. Key answer is Re: How to create an editable previewable report?
-
How to create links in table view
Hi
I am working in IC WebClient.
Can any body guide me how to create link on particular column of the table view and How can we navigate to another page by clicking on this link ?
I am filling the internal table (for table view) by z tables. I do not have context node for that.
Points will be rewarded.use Iterators. In the itarator you can create any BSP Object you wish to.
in the method RENDER_CELL_START of the interface IF_HTMLB_TABLEVIEW_ITERATOR
METHOD if_htmlb_tableview_iterator~render_cell_start.
DATA: lo_text TYPE REF TO cl_htmlb_textview,
lo_link TYPE REF TO cl_htmlb_link,
lv_link_click TYPE string,
lv_link TYPE string,
lv_dim TYPE string,
lv_pernr TYPE string.
FIELD-SYMBOLS: <dat> TYPE ANY.
lv_link = 'info.htm?pernr='.
lv_dim = 'left=300,top=220,width=620,height=200,menubar=0,scrollbars=yes,resizable=no'.
row_ref = p_row_data_ref.
CASE p_column_key.
WHEN 'PERNR'.
CREATE OBJECT lo_link.
lo_link->id = p_cell_id.
lo_link->text = get_column_value( p_column_key ).
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = lo_link->text
IMPORTING
output = lv_pernr.
CONCATENATE `window.open('` lv_link lv_pernr `' , '` lo_link->text `', '` lv_dim `');` INTO lv_link_click.
lo_link->text = lv_pernr.
lo_link->onclientclick = lv_link_click.
p_replacement_bee = lo_link.
WHEN OTHERS.
CREATE OBJECT lo_text.
lo_text->id = p_cell_id.
lo_text->wrapping = 'FALSE'.
lo_text->text = get_column_value( p_column_key ).
lo_text->design = 'STANDARD'.
p_replacement_bee = lo_text.
ENDCASE.
ENDMETHOD.
How to use Iterators.
/people/brian.mckellar/blog/2003/10/31/bsp-programming-htmlb-tableview-iterator
Hope this helps.
Cheers
Amandeep
<i><b>Reward points for each helpful answer.</b></i> -
How to create links to other pages i create??
I have finished my "homepage" and it has 5 buttons on it.("home",
"Contact us", etc.).
I have no idea how to create links to other pages i create.
For example, if the user clicks on "Contact us", i wnat contact information
to appear. So, do i create another html document that will contain contact
information and then call that page whenever the user clicks "Contact us". Or
do i just create another applet that contains contact information and display
the applet in the appropriate area, whenever the user clicks "contact us".
Hope that wasnt confusing. Bascially, I am sitting here looking at my buttons, not knowing
what code to put under the actionPerfomed part of each button.
thanx
trin... judging from your question... the best way i think is to create another page...
.... so when ur user clicks on Contact Us..... he/she will be taken to another page...
there are other techniques besides this.... but it is always better to stick with the easiest one
... so you need to create separate pages for all of your links....
... if you have any questions... let me know
.... have fun -
How to create links and how to use that links to go to other pages?
my question is....how to create links...i mean by using make link option.....when we do right click on a word,etc in the design view.....and my other question is.....how to use that links to go to other pages.....i mean when i click on a link...it takes me to another web page.....
Please do not post the same subject to more than one forum.
-
How to create links to the same page, how to create links to the same page
How to create link to the same page with iweb?
ThanksYou're referring to anchors. There are a couple of ways. These topics discuss them:
iWeb FAQ - Anchors
How do i hyperlink to certain portion...: Apple Support Communities
OT -
How to create links betwen two documents in KM?
how to create links betwen two documents in KM?
If you use the KM provided HTML editor, there is an option to provide a link to another KM document from one KM document.
Else if its an uploaded HTML, create a link like this:
<a href="/irj/go/km/docs/documents.....">CLICK</a> -
How to create radio button in reports
Hi Friends,
Can any body please tell how to create radio button in reports.
Thanks,
NagendraHi Nagendra,
But why do u need a single radio button, any specific reason...
try this
REPORT ZCHA1.
PARAMETERS : P_RAD1 RADIOBUTTON GROUP RAD,
P_RAD2 RADIOBUTTON GROUP RAD.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-NAME = 'P_RAD2'.
SCREEN-INVISIBLE = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Maybe you are looking for
-
I joined monthly and when I try to install it asks for a serial number
I don't have a serial number, and the only two options are trial or serial number
-
How can i downlaod a facebook album with firefox 4 ?
add-ons
-
Can't remove Contacts from iPod.
Even though the Sync Contacts From check box is unchecked under the Contacts Tab in iTunes (Version 8). My contacts are not being removed from my 5th Generation 30GB iPod. The contacts are taking up space on my full iPod and wanna make more space for
-
Will I need anti virus software for boot camp?
Hi everyone, i'm looking at installing leopard and xp onto an external portable hard disk. Will i need to install all the rubbish windows xp anti virus software if i'm not going to run / connect to the internet while using xp? My main use for xp is f
-
Printing through Kodak with one button in iPhoto
I'm using iPhoto 5.0.4. While visiting a friend who has v.7 I noticed there was a 'Kodak' button at the bottom of the window. She explained that that connected with the Kodak site and you could then send the pictures you wanted to be printed. Does an