How to create source system for flat file loads
How do I create a source system to load flat file?
I have a screen that asks for the following:
Logical system name
Source system name
Type and release
What should I enter for these?
I am not Basis and Basis was supposed to set this up.
hi sam.
STEPS TO CREATE FLAT FILE SOURCE SYSTEM
step:1 select source systems under modeling in AWB.
step:2 select Source Systems root node.
|---> context menu
|--->create......
step:3 select your required source system Icon.
(in your case it is PC Icon).
there it askes for a logical.......and source system name...
here u can specify any name of ur wish
for example:-
logical sys name --- PC_FF
source system name --- flat file source system*
*press Continue * button.
Observe the activation icon to confirm the successfull creation(_glowing lamp icon_ symbol)
Similar Messages
-
Error while creating process chain for flat file loading
Hi All,
I had Created a process Chain to load Transactiion data(Full load) form flat file which is in my computer.
start>Load>DTP>DeleteIndex>DTP loading CUBE--> Create Index
but the system is throwing an error as "An upload from the client workstation in the background is not possible."
I dont know why this error is coming?
Can some one help me
Regards
MamtaHi Mamta,
Basically if you want to load the DS through FF using process chain, the FF has to be placed in Application server. We cant load the FF when it is located in the client local workstation(FF On your PC).
So better you remove the Infopackage step from the PC. Load the IP manually. Once it is completed you can start the process chain with the following steps:
start>DTP>DeleteIndex>DTP loading CUBE> Create Index
Hope it is clear & helpful!
Regards,
Pavan -
Source System for Flat Flie in QA?
Hi Expert!
I have defined a new source system for flat files in QA environment,
and mapped this in 'conversion of source system names after transport'
but the loads do not recognize this new SS...
Error Msg "Source does not exist"
What can I do?
Thank you in advance!Please try to do export DataSource and see if you find it in QA.
Thanks
Arjun -
How to create a datasource for 0COSTCENTER to load data in csv file in BI
how to create a datasource for 0COSTCENTER to load data in csv file in BI 7.0 system
can you emil me the picture of the step about how to loaded individual values of the hierarchy using CSV file
thank you very much
my emil is <Removed>
allenStep 1: Load Required Master Data for 0CostCenter in to BI system
Step 2: Enable Characteristics to support Hierarchy for this 0Cost Center and specify the External Characteristic(In the Lowest Node or Last Node) while creation of this Characteristic InfoObject
Step 3: On Last Node of Hierarchy Structure in the InfoObject, Right Click and then Create Hierarchy MANUALLY by Inserting the Master Data Value as BI dosent Support the Hierarchy load directly you need to do it manually....
Step 4: Mapping
Create Text Node thats the first node (Root Node)
Insert Characteristic Nodes
Insert the Last Node of the Hierarchy
Then you need to create a Open hub Destination for extracting data into the .csv file...
Step1 : Create the Open Hub Destination give the Master Data table name and enter all the fields required....and create the transformations for this Open Hub connecting to the External file or excel file source...then give the location on to your local disk or path of the server in the first tab and request for the data...It should work alright let me know if you need anything else...
Thanks,
Sandhya -
How to create Source System in BI 7.0
Hi Experts,
How to create Source System in BI 7.0, please urgent
ThanksHi Mark,
Did you see the help site below which is telling how to create a source system .If not please take a look at it.
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a61e5e07211d2acb80000e829fbfe/frameset.htm
Regards,
® -
What are the settings for datasource and infopackage for flat file loading
hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumarLoading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets. -
Best practise around handling time dependency for flat file loads
Hi folks,
This is a fairly common situation - handling time dependency for flat file loads. Please can anyone share their experience around handling this. One common approach is to handle the time validity changes within the flat file where it is easily changeable by the user but then again is prone to input errors by the user. Another would be to handle this via a DSO. Possibly, also have this data entered directly in BI using IP planning layouts. There is a IP planning function that allows for loading flat file data but then again, it only works without the time dependency factor.
It would be great to hear thoughts or if anyone can point to a best practise document for such a scenario.
Thanks.Bump!
-
How to create search path for the file on the desktop..
hello experts..
I have used gui_upload module to upload the data from flatfile to the internal table, in that how can i create search path for the file selection in the selection screen, also please help me the code to update the ztable.
thanksHI
If iam not wrong you want to select a file from a location that you don't know so if this is ur problem then use the function module
F4_FILENAME
this FM helps to locate and select the desired file from the system.
Sample code that you can check is
How to get windows filename
PARAMETERS: lv_file LIKE rlgrap-filename.
Method 1
CALL FUNCTION u2019KD_GET_FILENAME_ON_F4u2019
EXPORTING
MASK = u2019,.txt,.*u2019
STATIC = u2019Xu2019
CHANGING
FILE_NAME = LV_FILE.
Method 2
CALL FUNCTION u2019F4_FILENAMEu2019
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = u2019 u2019
IMPORTING
file_name = LV_FILE.
Regards
Pavan -
Not Able to create Source system for MSS using DB Connect
hi All,
i am trying to create a source system for MSS(SQL Server) using DB Connect.
CAN I KNOW THE ENTIRE PROCEDURE FROM BOTH THE ENDS?
like how you create the user in SQL Server and
Do WE NEED ANY ADD-ONS in BW SYSTEM and the Connection Parameters..
needed immediate HELP...
ADVANCE THANKS TO ALLHi Lokanth,
Refer to OSS Note 512739.
Also check these links:
http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/frameset.htm
Bye
Dinesh -
How to create Logical System for ALE?
Hi All,
I'm an abaper and want to create Logical System For ALE. When i tried to make it using Tcode: SALE, msg appears that "Caution: The table is cross-client", when clik on continue button it shows "You are not allowed to change cross-client customizing". Help with proper documentation.
Thanks in Advance.Hi,
what you did is correct but you don't have the authorization for cross-clients in your sever.First take the authorization for cross-clients then follw the steps
Here i am giving link go through that and do practice,
http://www.****************/Tutorials/ALE/MaterialMaster/Distribute1.htm
http://www.****************/Tutorials/ALE/ALEMainPage.htm
Reward if it useful
lakshmi. -
How to create thumbnail view for html files
hi,
I want to create thumbnail view for html files, not for image files.. can we treat html files as images..
Anybody help me..You can right click on your Desktop and select New Folder. In Finder File > New Folder should work too, not in front of my Mac.
Welcome to back by the way. You might find these websites helpful.
Switch 101
Mac 101 -
Selection in IP for flat file Load
Hi Experts ,
I Want to know can I have selections available for an IP which is created for Flat file as data source.
your early response is highly appreciated.
Regards
PatilHi,
Yes You can. But at the data source level you have to tick the selection fields, so that at info pack level those fields will be available for selections.
Regards
Sankar -
How to create Source Systems in BI or RFC ??
Hi Gurus,
I want to load data from an R/3 connection to BI.
Now i have modified my Datasources in R/3 side.
Question is how i connect R/3 to BI ?
I will have to create RFC Connection , Yes ?
I did following steps , so far, PLEASE LET ME KNOW WHAT ELSE TO DO ???
1 To call the RFC we have to create destination.
Means Source system and Target system.
Source System: From where we are calling the RFC i.e. Source system. = R/3
Target System: To where it is calling i.e. Target system. = BI
2. In Source System, create DESTINATION
Goto SM59 to Create a RFC Destination.
3. In SM59 First screen you will get list of RFC Destions
Select R/3 Connections and Click on list(+)symbol it will gives already created Destions, Select R/3 Connections click on Create buttion, it will takes you into another screen to create Destionation.
Name, Password, Logon details.
once it is saved you can test it. Click on Test Connection Button
if it is executed successfully your destinatio is established
NOW WHAT DO I HAVE TO DO IN BI SIDE ????
i went to RSA1 -> source systems
Here i dont see my R/3 in source systems...
please give me step by step instructions.Hi
See SAP Help
http://help.sap.com/saphelp_nw2004s/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/content.htm
Connecting ECC6.0 and SAP BI
Setting-Up a Connection between BW and R/3 for Data Load
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/908836c3-7f97-2b10-4cb8-e6790361c152&overridelayout=true
Configuring RFC in BI7 for connecting ECC6 server:
Connecting ECC6.0 and SAP BI
Thanks
Reddy -
How To guide...for Flat File upload for User-Defined variables
Has anyone got link to the guide that describes how to do a flat file upload for populating User-Defined Variables ?
Any assistance will be appreciated.
UcheSAP BW Business Planning and Simulation "How To" Guides
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ab9fd590-0201-0010-2590-be78eb70015c
How to Upload User-Specific Variable Selections in BW-BPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how to upload user-specific variable selections in bw-bps.pdf
this is what you are looking for ?
Message was edited by: Murali -
Open Source API for Flat Files?
I did some searches on SourceForge for a flat-file serializer and deserializer. I know flat files are simple, but I did want to find something that allowed schema-like validations to be declared and enforced. The projects I saw were either abandoned or too simple. Does anyone know of a good open source flat file API? Thanks!
- SaishOk. That one is nice, especially in terms of defining header and trailer records. I also found this one http://sourceforge.net/projects/flatworm/ which allows for multi-line flat-files, which is also nice.
The problem is both only deal with parsing. Granted, writing a serializer even via reflection would not be all that tough. But a few Dukes for you!
- Saish
Maybe you are looking for
-
Creating new String using only specific set of chars from another String
I've performance troubles doing this task: I have a very long String A (up to 1 million character length) This String contains different characters. I need to create a String B containing only specific characthers (with a defined character code) An e
-
Macbook 2,1 maximum line-in level?
i have a mid2007 macbook2,1. recently i'm recording from a cossette into its line-in port. i just want to know what's the maximum input level it is. so i can get a good recording level.
-
Simultaneously video to AppleTV and audio to Express?
Hi All, can I simultaneously stream the video output of a movie on iTunes to my projector connected to an AppleTV and the audio output of the movie to speakers connected to Airport Express? When I try to use multiple speakers in iTunes on my Mac it d
-
Lost iTunes. Can I get everything back?
Our computer did something funky on us today and we had to do a system recovery and with that went iTunes and all the downloads, ripped cds and endless amounts of time spent on iTunes. I have downloaded iTunes, so it is back on my computer, but it is
-
Database Studio 7.7.04.23 - Export connections/configuration
I had hoped this would be simple, but I haven't been able to find anything. We're using DB Studio 7.7, and I want to export all of my connections (to various servers and databases). I'd like to use this export to populate DB Studio on co-workers pc