How to create Multiple UOM's for a Service

How do i create more than ONE, "Unit of Measures - for a perticular Service" in a Product Category/Group ?
AC01/AC02/AC03 would allow me to add "BASE UOM", but cant add more than one UOM for that service.
Can we have one-to-many relation between Services & UOM ? if not, how is it done in SRM-MM ??
-Rupesh

Dear Poster
Your thread has had no response since it's creation over
1 year ago, therefore, I am closing the thread.
Should the issue still be outstanding please create a new thread in the relevent forum.
Thank you for your compliance in this regard.
Jason Boggans
SAP SRM SDN Moderator

Similar Messages

How to create/assign Multiple UOM's for a Service

How do i create more than ONE, "Unit of Measures - for a perticular Service" in a Product Category/Group ?
AC01/AC02/AC03 would allow me to add "BASE UOM", but cant add more than one UOM for that service.
Can we have one-to-many relation between Services & UOM ? if not, how is it done in SRM-MM ??
-Rupesh

Dear Poster
Your thread has had no response since it's creation over
1 year ago, therefore, I am closing the thread.
Should the issue still be outstanding please create a new thread in the relevent forum.
Thank you for your compliance in this regard.
Jason Boggans
SAP SRM SDN Moderator

How to create multiple schedule lines for configurable products

Hi -
We have enabled variant configuration and would like to have multiple scheudule lines created , but it seems that only one line is avaialble, is there any way to configure the use of multiple schedule lines?
Note - we are not using KMAT material types, rather triggering a unique kit compoments within Sales BOM.
We have been able to make the necessary adjustments to allow the creation of the Scheduling agreement and have the BOM explode correctly, but just am not able to trigger multiple sched lines.
thanks
Bill

Your context node shall contain all these fields like country,city,etc as different attributes.so in your view configuration,add all these fields whatever you require from the AVAILABLE FIELDS section to the DISPLAYED FIELDS section.NOw all these attributes would be added in diff rows.What you need to do is,select the first attribute,lets say COUNTRY,click on this attribute and then on the buttn SHOW FIELD PROPERTIES.Thsi will show you the label name etc.Here you change the label name to NATIONALITY.Also ,it will show you the row no,cloumn span of the field and column span of the label.You need to reduce the column span of the field value.Ie if the column span is from D TO H,reduce it from D TO F.Now goto the next attribute eg CITY and in the same way,goto the attribute properties.Here ,There is a check box SHOW LABEL,uncheck this,and now goto the row no and the cloumn span.Make the row no same as that of the COUNTRY FIELD.The column span should howevrbe statring from where the column span of country field ended.Ie Teh column apsn of counrty field ended at F .So for CITY,the column span should start from G to amybe H.Now this is how you need to accomodate the other fields also in the same row,by changing the row no and column span in the field properties.
Suvidha

How to create multiple backup profiles for 2 disks?

Before I screw this up, I wanted to check with others here to see if I'm correct with my plan to use 2 disks to create 2 different types of backups.
I have 1 external HDD that's always hooked up to my iMac. This HDD is for full machine backups. However, I have a WD Passport drive that I want to use to back up multimedia (i.e. iTunes and iPhoto libraries). The last time I plugged in this drive, it screwed everything up... probably because Time Machine kicked in before I could exclude the Passport drive from the backup and the other HDD was near full.
What I was thinking I need to do is:
1.) Turn Time Machine off
2.) Mount the Passport drive
3.) Go into Time Machine perferences and select Change Disk
4.) Go into Options and deselect everything except our iPhoto and iTunes libraries (yuck... there should be a way to just select what you want)
5.) Turn Time Machine back on
6.) Run the backup
7.) Go back and change the disk back to my regular backup disk
This is ugly and seems error prone. Is there a better way to do this? Perhaps just deselect my Passport drive and write an Automator task for this? I'd like to do incremental backups, so that doesn't seem like a good solution either.
Thanks

Curt,
Time Machine settings are machine-specific, not "backup-specific." In other words, any exclusions you make will persist across any backups you make.
If you wish to make backups of your iTunes and iPhoto libraries, it would be better to do so manually. When you connect a drive that you might use for this purpose, simply open the Time Machine preferences and place that drive in the excluded list; there's no need to turn Time Machine off beforehand (if you exclude the drive while a backup is in progress, Time Machine will recover nicely and restart the backup).
In making your "additional" backup, I recommend using optical media. Burn your music to audio CDs, which could be re-imported into iTunes. Do the same with your images, which you would naturally burn to CDs/DVDs according to event or subject, then file those disks in an organized fashion. This will help you to keep your images organized, and you will feel safe in deleting some content from iPhoto as your need for it approaches nil. This in turn will help in taking the load off both your startup disk space requirements and Time Machine requirements.
A second external drive could be used to store those libraries, too, but I would do this in addition to the method described above. Optical disks, while bringing their own vulnerabilities, are less prone to failure than hard drives. One might lose the data on a single CD/DVD due to damage, but the rest would be OK. Store everything on one hard drive, and every file is dependent on the vitality of that one device. Overall, optical media wins out on this score. Then, there is the important issue of organization. A single drive allow one to be sloppy; use of optical media encourages (perhaps even enforces) the use of some type of file organization.
Scott

How to create multiple accouting documents for one invoice for diff curr

Hi experts/gurus,
I have a requirement where we need to create two two different accounting documents for one invoice. The scenario is this:
1) We are exporting goods to oversea customer, as such the currency is bill in USD
2) We also have transportation charges using another condition type, we need to capture this charges/accrual in local currency which is MYR.
Currently, the system will automatically convert the transporation charges to USD when we create the invoice and the accounting document will be generated in USD for both sales and transport charges.
is there a way to fullfil the above requirement, any setting in condition type or any user exists we can used to create hte accounting documents.
Any ideas/input is highly appreciated, points will be awarded

Hi Wan,
The following user exits are available in report SAPLV60B for transfer to accounting (function group V60B): So please go through these.
·EXIT_SAPLV60B_001: Change the header data in the structure acchd
You can use this exit to influence the header information of the accounting document. For example, you can change the business transaction, "created on" date and time, the name of the person who created it or the transaction with which the document was created.
·EXIT_SAPLV60B_002: Change the customer line ACCIT
You can use this exit to change the customer line in the accounting document. This exit is processed once the ACCIT structure is filled in with data from document header VBRK.
·EXIT_SAPLV60B_003: Change the customer line in costing
The customer line is filled in differently for costing. You can use exit 003 to influence the ACCIT structure.
·EXIT_SAPLV60B_004: Change a GL account item ACCIT You can add information to a GL account item (such as quantity specifications) with this exit.
·EXIT_SAPLV60B_005: User exit for accruals
Once all relevant data for accruals was entered in the GL account item, you can add to this data with this exit.
·EXIT_SAPLV60B_006: Change the control line ACCIT
You can use exit 006 to add information to the control line.
·EXIT_SAPLV60B_007: Change the installment plan
You can use exit 007 to add information to the installment plan
parameters in the GL account item.
·EXIT_SAPLV60B_008: Change the transfer structure ACCCR, ACCIT and ACCHD
After the accounting document is filled in with data, you can use exit 008 to change the document once again.
·EXIT_SAPLV60B_010: Item table for customer lines
You can use exit 10 to influence the contents of customer lines before they are created.
·EXIT_SAPLV60B_0011: Change the parameter for cash account determination or reconciliation account determination
You can use this exit to change inbound parameters in order to influence account determination.
I hope any one of these will solve your problem
Thanks,
Murali.

How to create multiple segments on the target structure of an IDOC

Hi All
I am working on the Shipment Confirmation Interface( Message Type SHPCON ) which is FILE to IDOC Scenario. I have a segment called E1EDL18 which occurs only once on the target side of the idoc. Now I have to created multiple E1EDl18 segments for the Qualifiers ORI, PGI and PCK. I treid to send a constant ORI,PGI,PCK and then used an user defined function which splits the constant at COMMA and then I am assigning to the target field QUALF. In the display queue for QUALF I see three values with context but still only one E1EDL!* segment is created. Please let me know how to create multiple E1EDl18 segments for three qualifiers.
Thanks
Naga

In message Mapping, just right click on the segment and click on duplicate subtree. now it will create you another segment with same name and fields in it..
you can hard code the Qual, or you can map the required source field into it.

Creating multiple input terminals for a boolean function?

Hi,
I was wondering how to create multiple input terminals for a boolean function? I'm pretty sure i've done so before, but I can't seem to remember how, I need to for a school assignment, and i've searched in the help in the program for about 3 hours before switching to google, which also didn't give me an answer.
I'm beginning to feel quite stupid especially since it is something quite simple I'm sure, but I just don't know how
my teacher is currently on vacation and since it was an assignment I actually should've done in september I doubt any of the other students still recalls.
What I want to do is create an or-function, with 3 boolean inputs, does anyone know how to do that?
Thanks

Look again at the picture posted above, it shows exactly what you need, the "compound arithmetic" node, found on the numeric and the boolean palette.
Resize it to the desired numbers of inputs.
right-click for the desired operation (AND, OR, XOR, etc.)
right-click on each terminal to invert the particular input or output (shows as small circle).
(I am not sure who gave the one star rating above, but that was certainly undeserved )
Message Edited by altenbach on 08-11-2007 08:46 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
compoundAND.png ‏1 KB

HT204053 how can i create multiple icloud accounts for my family members

how can i create multiple icloud accounts for my family members

Thanks... I appreciate the reply. Since I wrote the previous email, I actually went and changed my apple id (the main id) and the documentation I looked at said iCloud will set mail up automatically(?)... I had it working before.
Also, I tried to manually set up the ID via the Mail Accounts screen(s) and I can't figure out what my server information is... Pop or Imap? What's the outgoing server and the incoming server?
I typically have never had problems setting up mail accounts (in apple mail) with no problem.
Can anyone point me in the right direction?
Thanks in advance!

How to create different log files for each of web applications deployed in OC4J

Hi All,
I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
1. how to create different log files for each of my deployed web applications ?
2. what are the advantages in running multiple instances of oc4j and in what case we should run
multiple instances of OC4J ?
3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
Thanks and Regards,
Kumar.

Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi.

How To Create On Submit Button For Master_detail Page ?

I have adf page that is master And detail view.
i want to have one submit button for master and detail block

Duplicate of How To Create On Submit Button For Master_detail Page ?
Please don'r post your question multiple times.
Timo

How to create multiple instance on same database

Hi ,
I would like to know how to create multiple instance on same database . I know that some people use database configuration assistant to do this but i could not figure out how they did it.
Any how if some one can help me with this and can give me links of this it would be great help for me.
Thank you for reading my problem and helping me !
Amil
please if possible mail me on [email protected]

How to create multiple instance?????Do you mean multiple instances on the same database, or multiple databases on the same machine ?
I m new to this field....
Willin to learn a lot about oracle....Then it wouldn't be bad reading a bit of Database Concepts

How to create multi garnishment order for the same garnishment document

Hi,
Can anyone tell me how to create multi garnishment order for the same garnishment document. I tried to copy the entry in IT0195 but the sequence field is grayed out so it will just delete the old record. What configuration should I do to make this possible?
Thanks a lot in advance.

hi,
As far as I got it.
You cannot have multiple Garnishment order but if a need arises you have to maintain it in IT216.
For that follow this path goto PA30->pernr->194->change->Garnishment->adjustment.
Since like order you cannot maintain adjustment also directly.
Regards,
Amit
Reward all helpful replies.

How to create multiple toolbar buttons in jsp ?

hi all,
how to create multiple toolbar buttons in jsp ?
plz help me

mgmt
plzhttp://www.catb.org/~esr/faqs/smart-questions.html#writewell
How To Ask Questions The Smart Way
Eric Steven Raymond
Rick Moen
Write in clear, grammatical, correctly-spelled language
We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal ? in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.

How to create multiple selection screens in reports

How to create multiple selection screens in reports
Thanks,
Sridhar

Ex: hope you will find an idea from the below example :
SELECTION-SCREEN BEGIN OF BLOCK SEL1 WITH FRAME TITLE TIT1.
PARAMETERS: CITYFR LIKE SPFLI-CITYFORM,
            CITYTO LIKE SPFLI-CITYFORM.
SELECTION-SCREEN end OF BLOCK SEL1
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN INCLUDE BLOCKS SEL1.
SELECTION-SCREEN BEGIN OF BLOCK SEL2 WITH FRAME TITLE TIT2 .
PARAMETERS: AIRPFFR LIKE SPFLI-AIRPFROM,
            AIRPTO LIKE SPFLI-AIRPTO.
SELECTION-SCREEN END OF BLOCK SEL2
SELECTION-SCREEN END OF SCREEN 5000.
INITIALIZATION.
TIT1 = 'ITIES'.
aT SELECTION-SCREEN.
CASE SY-DYNNR.
WHEN '0500'.
   MESSAGE W159(at) WITH 'SCREEN 500'.
WHEN '1000'.
   MESSAGE W159(at) WITH 'SCREEN 1000'.
ENDCASE.
START-OF-SELECTION.
TIT1 = 'CITIES FOR AIRPORTS'.
TIT2 = 'AIRPORTS'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
TIT1 = 'CITIES AGAIN'.
CALL SELECTION-SCREEN 1000 STARTING AT 10 10.

[How-to] Create multiple Artboards in existing document?

Herro,
I'm wondering how to create multiple artboards at once in an existing document. I can manually re-arrange them later, that's fine. But I often find myself needing to create 20+ artboards for some of my complex projects.
Currently, adding those 20+ artboards manually is a pain as you can imagine.
Help?
Cheers.

open the Artboards panel. (Window->Artboards)
then down the bottom start clacking away at the new artboard button.

How to create Multiple UOM's for a Service

Similar Messages

Maybe you are looking for