How to create object for "kCallbackTimerBoss"

Hi All,
I need to create timer Concept in Indesign SDK plug-in,
help me in creating "kCallbackTimerBoss" Object.
Thanks,
Jerald

If you are talking about processes launched from a JVM (running outside), Process is available.
If you are talking about processes already running outside of a JVM, you could roll-your-own class to provide similar functionality as Process. This approach would be platform dependent, backed by the platform's I/O scripting and therefore limited to what the platform supports for process manipulation, e.g. Linux/Unix capabilities far exceed Windows.

Similar Messages

How to create object for a interface (or) how to use ITextModel Interface

Hi,
I am new to vc++ and indesign, i am using windows xp as OS and Indesign CS3 as version, now i want to know how to create an object for the ITextModel Interface (or) how to use the ITextModel interface, for getting the selected text and to manipulate the content, for this i tried myself to the best for more than a week,
but i not get any solution or any idea to do it, so i post this scrap, if any one knows kindly help me immediately, if u want any more details kindly reply me i am ready to give..
Regards,
ram

Hi, Ram,
as Jongware already has explained in a previous thread, this is the scripting forum, the SDK forum is next door.
Besides, your question has already been answered over there in SDK forum - with a reference to an existing example, including documented source. There is also plenty more documentation (780 pages alone in the programming guide) and other working examples.
The brief response was a perfect match to the vague, general scope of the question. If you want more details, be more specific yourself. Do not just touch such major topics as selection, text, object architecture in one sentence to expect a silver bullet. Instead, stick to one detail, find and read the relevant examples and documentation (did I mention the programming guide?) yourself e.g. using keyword search. Quote your code where you're stuck.
Being new to both VC++ and InDesign is an explanation but no excuse. IMO, same goes for "using windows xp as OS". All together are bad starting conditions if you intend to write a plugin. Even a seasoned C++ programmer with some years of experience in publishing quirks will easily require months, so don't become impatient after just a week.
If you need quick results and have a programming background such as a recent Java101, reconsider scripting (this forum). It can bring you amazingly far and you'll learn InDesign through a simplified object model. Same principles apply - there is plenty documentation and a good choice of examples.
Regards,
Dirk

Create Object for .rep in C#

How to create object for the BO Desktop Intelligence .rep in C#

[Read Before Posting - Where to find Business Objects .NET SDK Resources|Read Before Posting - Where to find Business Objects .NET SDK Resources;
Depending on what you are trying to do you may be able to do it using .NET:
[Samples|http://wiki.sdn.sap.com/wiki/display/BOBJ/NETReportEngineSDKSamples]
or you may have to still use COM:
[Desktop Intelligence Developer Guide|http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_deski_sdk_dg_en.pdf]
[Desktop Intelligence API Reference|http://help.sap.com/businessobject/product_guides/boexir31/en/deskisdk_com_apiref_12_en.zip]

HOW TO Create variants for transaction MASS on LFA1 object?

hOW TO Create variants for transaction MASS on LFA1 object?
Edited by: cheppalliakr on Nov 10, 2011 1:09 PM
Moderator message: please do more research before asking, show what you have done yourself and provide more information when asking.
Edited by: Thomas Zloch on Nov 10, 2011 3:10 PM

Hi Oscar ,
You need to create optional date prompt variable in BW which fills your requirement .
Ex : If you require report should always run for 1st of the month to last of month .Then create Optional date variable in BW with interval .write customer exit ,
if from date is left blank it should take 1st of the month and if todate is left blank it should take last of the month .
when creating webi schedules , leave prompts as blank.

What is authorization object and how to create it for a table

Hi All,
What is authorization object and how to create it for a table?
Thanks

Hi
Authorization
For authorization checks, there are many ways of linking authorization objects with user actions in an SAP system. The following discusses three possibilities in the context of ABAP programming.
Authorization Check for Transactions
You can directly link authorization objects with transaction codes. You can enter values for the fields of an authorization object in the transaction maintenance. Before the transaction is executed, the system compares these values with the values in the user master record and only starts the transaction if the appropriate authorization exists.
Authorization Check for ABAP Programs
For ABAP programs, the two objects S_DEVELOP (program development and program execution) and S_PROGRAM (program maintenance) exist. They contains a field P_GROUP that is connected with the program attribute authorization group. Thus, you can assign users program-specific authorizations for individual ABAP programs.
Authorization Check in ABAP Programs
A more sophisticated, user-programmed authorization check is possible using the Authority-Check statement. It allows you to check the entries in the user master record for specific authorization objects against any other values. Therefore, if a transaction or program is not sufficiently protected or not every user that is authorized to use the program can also execute all the actions, this statement must be used.
AUTHORITY-CHECK OBJECT object
 ID name1 FIELD f1
 ID name2 FIELD f2
 ID namen FIELD fn.
object is the name of an authorization object. With name1, name2 ... , and so on, you must list all fields of the authorization object object. With f1, f2 ... , and so on, you must specify the values that the system is to check against the entries in the relevant authorization of the user master record. The AUTHORITY-CHECK statement searches for the specified object in the user profile and checks the useru2019s authorizations for all values of f1, f2 ... . You can avoid checking a field name1, name2 ... by replacing FIELD f1 FIELD f2 with DUMMY.
After the FIELD addition, you can only specify an elementary field, not a selection table. However, there are function modules available that execute the AUTHORITY-CHECK statement for all values of selection tables. The AUTHORITY-CHECK statement is supported by a statement pattern.
Only if the user has all authorizations, is the return value sy-subrc of the AUTHORITY-CHECK statement set to 0. The most important return values are:
· 0: The user has an authorization for all specified values.
· 4: The user does not have the authorization.
· 8: The number of specified fields is incorrect.
· 12: The specified authorization object does not exist.
A list of all possible return values is available in the ABAP keyword documentation. The content of sy-subrc has to be closely examined to ascertain the result of the authorization check and react accordingly.
REPORT demo_authorithy_check.
PARAMETERS pa_carr LIKE sflight-carrid.
DATA wa_flights LIKE demo_focc.
AT SELECTION-SCREEN.
AUTHORITY-CHECK OBJECT 'S_CARRID'
 ID 'CARRID' FIELD pa_carr
 ID 'ACTVT' FIELD '03'.
IF sy-subrc = 4.
 MESSAGE e045(sabapdocu) WITH pa_carr.
ELSEIF sy-subrc <> 0.
 MESSAGE e184(sabapdocu) WITH text-010.
ENDIF.
START-OF-SELECTION.
SELECT carrid connid fldate seatsmax seatsocc
 FROM sflight
 INTO CORRESPONDING FIELDS OF wa_flights
 WHERE carrid = pa_carr.
 WRITE: / wa_flights-carrid,
 wa_flights-connid,
 wa_flights-fldate,
 wa_flights-seatsmax,
 wa_flights-seatsocc.
ENDSELECT.
Regards
Hitesh

How to create infostructure for my own archiving object?

We created our own archiving objects.
Could you help tell how to create infostructure for each of them?
Any info would be appreciated.

Hi,
Infostructure creation:
1. Create Field Catalog
2. Create Infostructure and assign Field catalog created
3. Activate Infostructure
4. Fill Infostructure
>> Retrieve archived data
Path to create Field Catalog:
Goto SARI >> Customizing >> Environment >> Create Filed catalog
Note: 1. During creation of Field catalog make use of field name from SE11 transaction.
2. Target field and Reference filed should be same and Source table from which you are considering the filed name
3. Key filed name should be Indicated
Path to create Infostructure
Goto SARI >> Customizing >> Environment >> Create Infostructure
Assign Archiving object for which this infostructure is created and assign filed catalog
Activate it.
Path to Fill structure
Goto SARI >> Status >> Select Archiving object and consider option Fill per Infostructure
In Archiving explorer you can retrieve archiving data.
-Thanks,
Ajay

How to create objects in ABAP Webdynpro?

Hi,
I want to create the object for the class: CL_GUI_FRONTEND_SERVICES.
then i want to call file_save_dialog method.
how shoud i write the code, plz?

I have written this code:
v_guiobj TYPE REF TO cl_gui_frontend_services.
 ?????????????
v_guiobj->file_save_dialog( ...).
How to create object in the place of ?????????????.
Bcoz, when i run this i am getting:
Access via Null object reference not possible.

How to create infopackage for Cube to Cune to transaction

HI Experts
I have performed following steps for cube to cube load.
1. Created source cube and loaded the data from R3
2. Created Destination cube
3. Generated Export Data source for the source cube. Here I'm able to see my datasource Icon(8ZFIGL_C01). When I double click on that it is give details.
4. Defined the update rules for Destiination cube by assiging the infosource (8ZFIGL_C01) which is created in step3.
5.Now I'm searching for the infosurce (8ZFIGL_C01) in data modelling -> infosource. its not showing up any name with 8ZFIGL_C01.
Kindly let me know how to create infopackage for this to laod the data from cube to cube.
Additional information:
I have set the optopn Display Generated Object in Settings.
Thanks in advance for your help.
Regards
NLN

Hi,
Right Click on "Infosource" (TA RSA12 Top at the Right side Panel) and choose Insert lost nodes and refresh the screen and now search for your infosource and you will find it.
See solution from SAT:
Problems with Infosource Data Marts
Best regards,
Frank

How to create object by getting class name as input

hi
i need to create object for the existing classes by getting class name as input from the user at run time.
how can i do it.
for exapmle ExpnEvaluation is a class, i will get this class name as input and store it in a string
String classname = "ExpnEvaluation";
now how can i create object for the class ExpnEvaluation by using the string classname in which the class name is storted
Thanks in advance

i think we have to cast it, can u help me how to cast
the obj to the classname that i get as inputThat's exactly the point why you shouldn't be doing this. You can't have a dynamic cast at compile time already. It doesn't make sense. Which is also the reason why class.forName().newInstance() is a very nice but also often very useless tool, unless the classes loaded all share a mutual interface.

How to create objects in stack

I am working on Weblogic 10 and JDK 1.5. In Java the objects are always created in heap. Can anybody tell me how to create objects in stack?

SKMoharana wrote:
i need objects to be allocated in stack as my application should respond in real time (time predictable).I heard this is possible in Mustang.If I am understanding you correctly, allocating objects on the stack will not help you, and creating objects on the heap will not hurt you.
It is provably impossible to create a truly time predictable application (in any language), so what you're really looking to do is create a program that responds acceptably quickly for an acceptable percentage of the time. For this you can create benchmarks like "responds in 250 milliseconds or less 99.5% of the time".
To this end, you could create a prototype program that creates the objects you wish on the heap, and see if there actually is a problem. Don't fall into the trap of premature optimization.
Even if you do discover that your object creation IS the problem, heap allocation is not the problem. Take a look at this article. It takes ten machine instructions, less than 1 millisecond, to allocate an object.
Your performance problems are most likely in the object initialization (look for long loops or deep recursions), the display (if this is a GUI application), or your network connection (if this is a web application).

How to create iView for customized master head war ?

Hi,
I deployed customized masterhead war file. But i cant see deployed war in portal application location.
Anyone help me for customizing and masterhead page and how to create iView for customized master head...

Hi,
1. You can see the deployed application under the "Portal Applications"
2. If you want to create an iView out of it. right click on the application -> copy. than press right click in the folder you want the iView will be created and paste ad pcd object.
Hope I helped you.
Ronny.

How to create webservice for abap RFC

how to create webservice for abap RFC.......................
plz any could tel me

I'll answer my own question...
In SE80 you create the Function Group and something called a Virtual End Point. These are the only items that transport forward to you QA and eventually your production system. Everything else has to be created in SOAMANAGER on the target systems.
In Development in SE80, when you create the Virtual End Point, this creates a corresponding entry visible in transaction SICF. When you are done in SOAMANAGER, it creates three more entries in SICF. The process of transporting the Virtual End Point does NOT create any entries in SICF in QA. Don't let this be confusing. In QA, SOAMANAGER will create all four SICF entries.
Also, if you try to secure the web services using the S_SERVICE object, you must actually test the web service before you can add it to any roles. This is because the USOBHASH table is not populated for the web service until you actually run the web service for the first time.

How to create tcode for modulepool program with selection screen?

hi,
How to create tcode for modulepool program with selection screen?
thanks,
sagar

Hi,
We need to goto SE80.
In our program we right click on object name and goto create
-> transaction. Enter the module pool program and screen number and save and activate.
Or by SE93 also we can create a transaction code for our program.
Hope ths helps.
plz reward if useful.
thanks,
dhanashri..
Edited by: Dhanashri Pawar on Jul 22, 2008 8:29 AM

How to create program for bapi?

hi all,
how to create program for bapi?
reply me soon now.....
can anybody help me.....
thanks,
S.Suresh.
Title was edited by:
Alvaro Tejada Galindo

Hi ...Here is the step by step procedure for creating BAPIs.
There are 5 different steps in BAPI.
- Create BAPI Structure
- Create BAPI Function Module or API Method.
- Create BAPI object
- Release BAPI Function Module.
- Release BAPI object.
Step1. Creating BAPI Structure:
- Go to <SE11>.
- Select Data Type & Enter a name.
- Click on Create.
- Note: Always BAPI should be in a development class with request number (Not Local Object).
- Select Structure & hit ENTER.
- Enter the fields from your database. Make sure that the first field is the Primary Key Field.
- Then SAVE & ACTIVATE.
Step 2. Creating BAPI module:
- Enter TR.CODE <SE37>.
- Before entering any thing, from the present screen that you are in, select the menu
Goto -> Function Groups -> Create Group.
Enter a name (Note: This name Must start with ZBAPI)
Let this screen be as it is and open another window and there, enter TR.CODE <SE80).
Click on the Third ICON that says Inactive Objects.
Select the group that you just created and click on Activate.
Notice that the group you created will disappear from the list of inactive objects.
- Go back to ><SE37> screen and enter a name and hit <ENTER>. Then enter the group name that you just created and activated.
NOTE: When you release a function module the respective group will be attached to that particular application. It cannot be used for any other application. NEVER include an already existing group that is attached to another module.
Now click on the first Tab that says [ATTRIBUTES] and select the radio button that says remote-enabled module since we will be accessing this from any external system.
Then click on the second tab that says [IMPORT].
Enter a PARAMETER NAME, TYPE and the structure you created in the first step. Also select the check box Pa. All remotely enabled functional modules MUST be Pa enabled, where Pa means Passed by Value and if you dont select Pa, then that means it will be passed by reference..
Then click on tab that says [EXPORT].
Enter the following as is in the first three fields
RETURN TYPE BAPIRETURN (These 3 field values are always same)
Here also select Pa meaning Pass by value.
Note: BAPIRETURN contains structure with message fields.
Then SAVE and ACTIVATE.
Step 3. Creating BAPI object:
- Enter Tr.Code <SWO1> (Note. It is letter O and not Zero).
- Enter a name and then click on create. Enter details.
NOTE: Make sure that that Object Type and Program name are SAME.
- Enter Application M, if you are using standard table Mara. If you are using your own database then select Z at the bottom.
- Then hit <ENTER>.
- Now we have to add Methods. High light METHODS and then select the following from the menu:
Goto Utilities -> API Methods -> Add Methods.
- Enter function Module name and hit <ENTER>.
- Select the second FORWARD ARROW button (>)to go to next step.
- Check if every thing looks ok and again click on FORWARD ARROW button (>).
- Then select YES and click on <SAVE>.
- Now on a different screen goto TR.CODE <SE37>. Enter Function Module name and select from the top menu Function Module -> Release -> Release.
- Goback to TR.CODE <SWO1>.
Here select the menu combination shown below in the same order.
- Edit -> Change Release Status -> Object Type Component -> To Implemented.
- Edit -> Change Release Status -> Object Type Component -> To Released.
- Edit -> Change Release Status -> Object Type -> To Implemented.
- Edit -> Change Release Status -> Object Type -> To Released.
- Then click on <SAVE>.
- Then click on Generate Button (4th button from left hand side looks like spinning wheel).
- Then Click on the button that says PROGRAM to see the source code.
To check if this is present in work flow goto TR.CODE <BAPI>.
Here it shows business object repository.
- First click on the middle button and then select ALL and hit ENTER.
- Goto tab [ALPHABETICAL] and look for the object that you created. This shows that the BAPI object has been created successfully
Overall Info :
http://help.sap.com/saphelp_47x200/helpdata/EN/00/32a43697bc11d1acf9080009b0fb56/frameset.htm
BAPI Creation Info :
http://help.sap.com/saphelp_47x200/helpdata/EN/e0/9eb2370f9cbe68e10000009b38f8cf/frameset.htm
Reference :
http://help.sap.com/saphelp_47x200/helpdata/EN/00/32a43697bc11d1acf9080009b0fb56/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/EN/00/32a43697bc11d1acf9080009b0fb56/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/EN/e0/9eb2370f9cbe68e10000009b38f8cf/frameset.htm

How to create transaction for a maintenance view, Thank you.

How to create transaction for a maintenance view,
Thank you.
deniz...

Hi Deniz,
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
select
viewname and give ur table name.
UPDATE= Xsave
view - table name ( Should be upper case
update X ( should be upper case).
http://www.sap-basis-abap.com/sapbs011.htm
Hope this helps you.
Regards,
Viveks

How to create object for "kCallbackTimerBoss"

Similar Messages

Maybe you are looking for