How to create Oracle_Text INDEX for Japanese Contents
We inspected both environments, Oracle 9iFS and Oracle CMSDK (Application Server 10g 9.0.4.2, CMSDK 9.0.4.2)
We use the same SQL command "execute ctx_ddl.sync_index('IFS_TEXT'); "as Oracle 9iFS for create INDEX.
But full-text search function cannot work correctlly in OracleCMSDK when we use Japanese contents file.(Otherwise Oracle 9iFS works correctlly.)
Is this SQL command syntax correct?
Any information would be helpful for us if there are some configurations to create INDEX in Japanese content of Versioned file.
Thanks in advance.
Hi Parag,
I am working on the same issue with Sri and will explain the requirement in detail.
Requirement
We need a Page which will have 17 questions and answers will Yes or No. Employee need to answer all the questions and then submit the page and after submitting, it will send the FYI Notification to concerned people.
Old Approach
We thought of developing it with the EIT page and decided to put Questions in EIT segment prompt and attaching YES_No value set. But the Question text is more than 500 characters and segment prompt can be only 80 char.
Now we are trying to find a new approach to achieve the mentioned requirement.
Kindly let me know if you need any other detail from my end.
Many Thanks
Gaurav
Similar Messages
-
How to create a Index for KM documents
Hi Experts.......
I have two queries .
1,How to create a Index for the KM Server documents so that when ever i am in need of particular document,i can be able to retrive the exact document within short time......
2,What Is TREX? Need of TREX ?
If any one have documents for the above said queries kindly send it to [email protected]
Thanks in Advance,
JasmineHi Jasmine,
1.In the EP 6.0 you can create index System Administration -> System Configuration -> Knowledge Management -> Index Administration
2.TREX is search engine that will proccess the documents that you have specified in the index Data sources when you have created the index.
The status of TREX you can see in System Administration -> Monitoring -> Knowledge Management -> TREX Monitor or Index Monitor for indexing monitoring.
If you don't have connected any TREX engine to J2EE, just start the visual administrator and configure the TREX service.
To install the TREX you can follow the instguides for TREX service.sap.com/instguides SAP Netweaver->Release 04 or 2004s -> Installation -> Cross-NW
I hope that it helps.
Bye
Dan -
How to create tab indexing for jtextBox
Dear Forum
i am user of jDeveloper.
And working on JClient/Swing application.
In "Jframe.java" i add various cotrols such as jTextbox,jCombobox ,jlabel etc.
So how to create tab indexing for these controls.
GirdherDear Forum
i am user of jDeveloper.
And working on JClient/Swing application.
In "Jframe.java" i add various cotrols such as jTextbox,jCombobox ,jlabel etc.
So how to create tab indexing for these controls.
Girdher -
Index - How to create an index for multiple InDesign files?
Hi everyone,
I'm using InDesign CS2 to create a 250 page catalogue. Most of it is finished now, and I've come to creating the index.
The catalogue is spread over about 10 InDesign files. How do I create an index for this? No paragraph styles were set up when it was started, but there are character styles.
I've done some searching - does it need to be booked so I Can index? And can I book it without paragraph styles?
(I've only been using InDesign for about a year, mostly self taught.)
Thanks in advance :)
NaomiCreating a book from your files should be no problem at all. ID does
i not
synchronize styles across documents -- unless you order it to! (That's what the checkboxes at the left of the book documents are for. Do Not Use, in your case.)
The Index function itself is book-savvy, but you might want to search this forum for a few recurring problems. -
How to create new INDEX for TREX
Hello Experts,
Iam new to this KM and TREX so need ur guidance for this...
I need to create an INDEX for TREX, so after going through various messages i found that it can be created form the Index Administration iView portal----System Administration -> Syetm Configuration -> Knowledge Management -> Index Administration -> New Index
But iam not getting the above path in SPRO OR how to run Index Administration iView OR from which portal i need to create an INDEX??can anyone provide steps on how to go to System Administration -> Syetm Configuration -> Knowledge Management -> Index Administration -> New Index
path.....
Regards.I'm not very familiar with CRM business partners, but the common way - to include the repository where the documents are stored to the KM using [CM Repository managers|http://help.sap.com/saphelp_nw04/helpdata/en/e3/923227b24e11d5993800508b6b8b11/frameset.htm].
You need first to create a repository manager for you repository and only then you'll be able to create an index.
Regards, Mikhail. -
How to create a index for solution database - CRM5.0
Hello Experts,
We want to have knowledge search in our IC web client
Trex 7.0 is alreasy installed.
I have done configuration in SAF.Also have created problem/solution in IS01-tcode
When I tried to compile SDB, I am getting error " 2007 - Index does not exist.
Can any one tell me how to create a index and how to assign a problem to SDB.
Regards,
Indhra.EHi,
Please ensure the following are correctly configured.
At IMG location CRM > Enterprise Intelligence > Software Agent Framework
1. The knowledge base has been configured - "Name and Configure Search Engine".
2. The knowledge base has been included in application - "Configure Application". The knowledge base should be in both application "ALL" and "ICWEBClient". (SAP note - 1091759 refers to similar error)
Then, as you might have executed the BSP application, CRM_EI_CMP_ADMN->default page, and select some language & click on Full index.
You might want to monitor the indexing process in TREX with the help of TREX admin. If nothing is shown in the index queue after the detail compilation shows status as finished, then the problem is in the CRM side and the documents are not flowing to TREX. So you might want to put breakpoint at CL_CRM_SAF_SE_TREX_ABAP classes' FULL_COMPILE method and analyse.
Kindly get back with any more details that you find if the problem doesn't gets solved.
Regards,
Uma. -
How to create an index for bi-lingual text column
I have a column that keeps the full file name of the attachment document file of a record. I need to build an index on the column so that we can search the attachment document file. The content of the file will be in English or French, but we don't know which one is in English and which one is in French. How I should build the index so that it will support 'contains' query and 'about' query for both English and French documents? What lexer, wordlist and stoplist I should use?
Here is something I am thinking:
lexer: basic_lexer
stoplist: build a custom stoplist that contains the stopwords for English and French.
wordlist: use the default for US should be OK since we don't need to support fuzzy and stem search.
The only problem is that it will only create the theme index properly for the English document but not the French document. This is because the NLS_LANG setting for the session is always in English. Therefore, the English knowledge base and lexicon will be used. I cannot use the THEME_LANGUAGE setting to overide it because I don't know the language of the document. Is there a way to merge the English knowleage base and lexicon with the French ones so that we can create a correct theme index without knowing the language of the document?
I am also thinking about using the multi_lexer. However, it won't help since we don't the language of the document.
Can anyone give me some help?
Thanks,
Wenjie
nullCreating a primary key, by definition, creates a (unique) index. Either inline at table creation, or via an alter table.
If its a composite PK, the alter table or inline constraint definition, after all the column declarations, is the only way to do it that I'm aware of.
create table t1 ( t1_pk number,
t1_desc varchar2(50),
constraint primary key t1_name_pk (t1_pk) [ using index tablespace <tblspc>]
-- or can constrain at the column def
create table t1 ( t1_pk number constraint t1_name_pk primary key ...,
-- or with an alter table. this won't work if there are non-unique entries
alter table t1 add ( constraint t1_name_pk primary key ( t1_pk [ index clause ] );The t1_name_pk constraint name can be optional, but if you don't include a constraint name the error messages are difficult to interpret, you get a system generated constraint name.
"... constraint <schema.>t1_name_pk violated ... " is much more informative than "... constraint <schema.>SYS_CNNNNNNNN violated ...".
The created index gets the same name used for the constraint as well. -
How to create a clickable Table of contents using Crystal Reports 8.5
How to create a clickable Table of contents using Crystal Reports 8.5. I was able to create the table of contents using subreport and temporary table. but not able to link to the pages.
how to make it clickable ?
-VivekHi Vivek,
To you may create on demand sub report.
In main report only the link will be shown when you click on the link the sub report will be opened in a new tab.
It can be placed in a Group header and to show the data for that particular group only.
Click on the Help menu in the crystal Reports Designer and open the Crystal Reports Help
Go to Index tab and type in subreport
Select Creating On demand you will get lot of information on that.
Please let us know if that is enough to solve your problem
Regards,
Aditya Joshi -
How to create Search Help for a field in Table control !!
Hello Friends,
I like to know - How to create Search Help for a field in Table control. Is it possible, if it is please share ur knowledge, I wud be happy if U provide some source code example for this.
Thanks,
SenthilCheck the sample code:
*& Include ZSRO_MPRN_SEARCH *
MODULE PSTLZ_F4 INPUT
MODULE pstlz_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = c_x
determine_loop_index = c_x
TABLES
dynpfields = lt_dynpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
MOVE lt_dynpfields-fieldvalue TO ws_outcode.
ws_len = STRLEN( lt_dynpfields-fieldvalue ).
IF ws_len GE 7.
ws_len = ws_len - 3.
ws_icode = ws_code+ws_len(3).
lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
CONCATENATE lt_dynpfields-fieldvalue '%'
INTO ws_outcode.
CONDENSE lt_dynpfields-fieldvalue.
REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
ELSE.
CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
INTO ws_outcode.
ENDIF.
ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
TABLES
dynpfields = lt_dnpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode.
ELSE.
MPRN blank and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1.
ENDIF.
ELSE.
MPRN exist and Post code exist
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode AND
mprn EQ lt_dnpfields-fieldvalue.
ELSE.
MPRN exist and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE mprn EQ lt_dnpfields-fieldvalue.
ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'MPRN'
dynpprog = sy-repid
dynpnr = sy-dynnr
window_title = 'Select MPRN'
value_org = 'S'
TABLES
value_tab = i_mprn1 "lt_mprn
return_tab = lt_returntab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
READ TABLE lt_returntab INDEX 1.
READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
IF sy-subrc EQ 0.
Updating post code
CONCATENATE i_mprn1-outcode i_mprn1-incode
INTO ws_postcode
SEPARATED BY space.
MOVE ws_postcode TO i_mprn-post_code.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld-fieldvalue = ws_postcode .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
Updating MPRN
MOVE i_mprn1-mprn TO i_mprn-mprn.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-MPRN'.
ws_dynpfld-fieldvalue = i_mprn1-mprn .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ELSEIF sy-subrc EQ 2.
MESSAGE s005(zspa) WITH ws_postcode .
ENDIF.
ENDMODULE. "PSTLZ_F4 INPUT
MODULE MPRN_F4 INPUT
MODULE mprn_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = c_x
determine_loop_index = c_x
TABLES
dynpfields = lt_dynpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
MOVE lt_dynpfields-fieldvalue TO ws_outcode.
ws_len = STRLEN( lt_dynpfields-fieldvalue ).
IF ws_len GE 7.
ws_len = ws_len - 3.
ws_icode = ws_code+ws_len(3).
lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
CONCATENATE lt_dynpfields-fieldvalue '%'
INTO ws_outcode.
CONDENSE lt_dynpfields-fieldvalue.
REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
ELSE.
CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
INTO ws_outcode.
ENDIF.
ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
TABLES
dynpfields = lt_dnpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode.
ELSE.
MPRN blank and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1.
ENDIF.
ELSE.
MPRN exist and Post code exist
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode AND
mprn EQ lt_dnpfields-fieldvalue.
ELSE.
MPRN exist and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE mprn EQ lt_dnpfields-fieldvalue.
ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'MPRN'
dynpprog = sy-repid
dynpnr = sy-dynnr
window_title = 'Select MPRN'
value_org = 'S'
TABLES
value_tab = i_mprn1 "lt_mprn
return_tab = lt_returntab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
READ TABLE lt_returntab INDEX 1.
READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
IF sy-subrc EQ 0.
Updating MPRN
MOVE i_mprn1-mprn TO i_mprn-mprn.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-MPRN'.
ws_dynpfld-fieldvalue = i_mprn1-mprn .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
ws_dynpfld-stepl = mprn-current_line.
**code changed by laxman 10.08.2005
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
Updating post code
CONCATENATE i_mprn1-outcode i_mprn1-incode
INTO ws_postcode
SEPARATED BY space.
MOVE ws_postcode TO i_mprn-post_code.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld-fieldvalue = ws_postcode .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
break gblap0.
ws_dynpfld-stepl = mprn-current_line.
LOOP AT i_mprn.
MOVE i_mprn1-mprn TO i_mprn-mprn.
MOVE ws_postcode TO i_mprn-post_code.
MODIFY i_mprn INDEX
mprn-current_line." transporting MPRN POST_CODE.
ENDLOOP.
**code changed by laxman 10.08.2005
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ELSEIF sy-subrc EQ 2.
MESSAGE s006(zspa) WITH i_mprn1-mprn .
ENDIF.
ENDMODULE. "MPRN_F4 INPUT
MODULE GNTC_F4 INPUT
MODULE gntc_f4 INPUT.
DATA: BEGIN OF lt_gntc OCCURS 0,
gntc LIKE iflot-zzgntc,
END OF lt_gntc.
CLEAR: lt_returntab, lt_gntc.
REFRESH: lt_returntab, lt_gntc.
lt_gntc-gntc = 'DM'.
APPEND lt_gntc. CLEAR lt_gntc.
lt_gntc-gntc = 'NDM'.
APPEND lt_gntc. CLEAR lt_gntc.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'ZZGNTC'
dynpprog = sy-repid
dynpnr = sy-dynnr
window_title = 'Select Gas Nomination Type Code'
value_org = 'S'
TABLES
value_tab = lt_gntc
return_tab = lt_returntab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
READ TABLE lt_returntab INDEX 1.
i_mprn-dm_ndm = lt_returntab-fieldval.
ENDIF.
ENDMODULE. "GNTC_F4 INPUT
*& Module mprn1_f4 INPUT
text
MODULE mprn1_f4 INPUT.
DATA: lt_f4 TYPE ddshretval OCCURS 0 WITH HEADER LINE,
lt_returntab1 LIKE ddshretval OCCURS 0 WITH HEADER LINE,
lt_dynpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
lt_dnpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE.
DATA: stepl1 TYPE systepl,
stepl_index1 TYPE systepl.
DATA : i_dnpfld1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
ws_dyname1 LIKE d020s-prog,
ws_dynumb1 LIKE d020s-dnum,
ws_dynpfld1 LIKE dynpread.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
determine_loop_index = 'X'
TABLES
dynpfields = lt_dynpfields1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = 'IFLOT'
fieldname = 'I_MPRN-MPRN'
searchhelp = 'ZS_MPRN_PC'
dynpprog = sy-repid
dynpnr = sy-dynnr
TABLES
return_tab = lt_f4
EXCEPTIONS
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-mprn.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
ws_dynpfld1-fieldvalue = i_mprn-mprn.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-post_code.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld1-fieldvalue = i_mprn-post_code.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDMODULE. " mprn1_f4 INPUT
*& Module pstlz1_f4 INPUT
text
MODULE pstlz1_f4 INPUT.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-MPRN'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
determine_loop_index = 'X'
TABLES
dynpfields = lt_dynpfields1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = 'IFLOT'
fieldname = 'I_MPRN-POST_CODE'
searchhelp = 'ZS_MPRN_PC'
dynpprog = sy-repid
dynpnr = sy-dynnr
TABLES
return_tab = lt_f4
EXCEPTIONS
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-post_code.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld1-fieldvalue = i_mprn-post_code.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-mprn.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
ws_dynpfld1-fieldvalue = i_mprn-mprn.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDMODULE. " pstlz1_f4 INPUT
Regards,
Prakash. -
How To: Create a link to gatewayed content (e.g. in email)
I apologize if this is too basic of a question but I can't find any results after looking for several hours.
I would like to generate a URL in an email that points to the portal and a specific portlet in the portal. The portlet has limited access rights so the URL should cause the portal to go through the login page and then redirect to the portlet. Can anyone point me to the documentation that describes this or give me an example?
Thanks in advance!
MikeUsing the PTARGS might also solve another difficulty I've encountered passing (dynamic) querystring parms to portlets through the gateway. Your example seems to work great for portlets, but now trying to access a Community page containing a portlet to retain branding elements.
For portal pages, should the ObjectID be the pageID (i.e PageID=0 for the default page) or is the ObjectID for a community page some other value (where in PlumDB is this stored) ? I changed the ClassIDView to 514 which should indicate a Community Page but it's still not loading my page. Adding to my confusion, the PTCOMMPAGES table stores the PageID as a negative value.
Here's my example:
http://portalserver/portal/server.pt/gateway/PTARGS_0_0_0_201_0_514/http%3B/portletserver/ApplicationName/default.aspx?querystring=value
Any thoughts?
re: How To: Create a link to gatewayed content (e.g. in email) Posted by Mike Beniston 5/5/05 9:45:40 AM It turned out that I was pretty close.
If anyone else is interested, here is one way that works.
The PTARGS are _0_userid(leave at 0)_objectid(of portlet)_communityID(if any)_0_ClassIDView(43 = view for portlet)
"http://portalserver/portal/server.pt/gateway/PTARGS_0_0_348_208_0_43/http://portletserver/ApplicationName/pagename?querystring arguments. -
How to create an index from more than one pages document?
I have 10 different pages documents. Each document is a book chapter. Now I would like to create one index for all of these chapters in a new pages-file without copying all files into one single file. How does this work?
Thanks for your answer. Than this is a real deficit of pages. Have you got any ideas for an alternative solution, that doesn´t force me to work with Microsoft? I have a document of 300 pages, having this in one document is neither practical nor stable. Thank for supporting!
-
How to create authorisation object for save button please help in abap
how to create authorisation object for save button please help in abap
Hi
In general different users will be given different authorizations based on their role in the orgn.
We create ROLES and assign the Authorization and TCODES for that role, so only that user can have access to those T Codes.
USe SUIM and SU21 T codes for this.
Much of the data in an R/3 system has to be protected so that unauthorized users cannot access it. Therefore the appropriate authorization is required before a user can carry out certain actions in the system. When you log on to the R/3 system, the system checks in the user master record to see which transactions you are authorized to use. An authorization check is implemented for every sensitive transaction.
If you wish to protect a transaction that you have programmed yourself, then you must implement an authorization check.
This means you have to allocate an authorization object in the definition of the transaction.
For example:
program an AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT <authorization object>
ID <authority field 1> FIELD <field value 1>.
ID <authority field 2> FIELD <field value 2>.
ID <authority-field n> FIELD <field value n>.
The OBJECT parameter specifies the authorization object.
The ID parameter specifies an authorization field (in the authorization object).
The FIELD parameter specifies a value for the authorization field.
The authorization object and its fields have to be suitable for the transaction. In most cases you will be able to use the existing authorization objects to protect your data. But new developments may require that you define new authorization objects and fields.
http://help.sap.com/saphelp_nw04s/helpdata/en/52/67167f439b11d1896f0000e8322d00/content.htm
To ensure that a user has the appropriate authorizations when he or she performs an action, users are subject to authorization checks.
Authorization : An authorization enables you to perform a particular activity in the SAP System, based on a set of authorization object field values.
You program the authorization check using the ABAP statement AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT 'S_TRVL_BKS'
ID 'ACTVT' FIELD '02'
ID 'CUSTTYPE' FIELD 'B'.
IF SY-SUBRC <> 0.
MESSAGE E...
ENDIF.
'S_TRVL_BKS' is a auth. object
ID 'ACTVT' FIELD '02' in place 2 you can put 1,2, 3 for change create or display.
The AUTHORITY-CHECK checks whether a user has the appropriate authorization to execute a particular activity.
This Authorization concept is somewhat linked with BASIS people.
As a developer you may not have access to access to SU21 Transaction where you have to define, authorizations, Objects and for nthat object you assign fields and values. Another Tcode is PFCG where you can assign these authrization objects and TCodes for a profile and that profile in turn attached to a particular user.
Take the help of the basis Guy and create and use.
Regards
ANJI -
How to create user group for EIS (Executive Information System) KCBA
Dear Experts,
How to create user group for EIS (Executive Information System)
TCode KCBA
Regards
SaurabhHi ,
Check the below link ,hope it will give some inputs for creating groups.
http://help.sap.com/saphelp_470/helpdata/en/5c/c1c81c445f11d189f00000e81ddfac/content.htm
Regards
udayakumar.k -
Error during TREX indexing for WPC content
Hello,
I have setup TREX to search Web Page Composer content. I am getting folowing error below during the indexing for WPC content. Any help would be great.
thanks
Jaish
[3508] 2008-08-11 15:19:19.842 e preprocessor Preprocessor.cpp(03957) : HANDLE: DISPATCH - Processing Document with key '/wpccontent/Sites/ddtest/Web Pages/DDTestWebPage/output.xml' failed, returning PREPROCESSOR_ACTIVITY_ERROR (Code 8002)
[3508] 2008-08-11 16:39:06.196 e preprocessor Preprocessor.cpp(01167) : HTTPHEAD failed for URL http://sjcsapqapt.datadomain.com:50300/irj/servlet/prt/portal/prtroot/docs/guid/80fa1c8c-1b4a-2b10-38ab-b20f54134ca1?prtmode=trex with Httpstatus 500
[3508] 2008-08-11 16:39:06.212 e preprocessor Preprocessor.cpp(03957) : HANDLE: DISPATCH - Processing Document with key '/wpccontent/Sites/ddtest/Web Pages/DDTestWebPage/output.xml' failed, returning PREPROCESSOR_ACTIVITY_ERROR (Code 6500)there was problem with Index creation the way I was creating it.
-
Error when creating BIA INDEX FOR CUBE
Hi
I am trying to create BIA index for a cube and I am getting error
"An error occurred. Choose "Continue" to start again from the beginning" in the second step. Could any body explain what this error mean and How to correct it.
and when I press BIA Moniter tab I am getting following message.
An error occurred. Choose "Continue" to start again from the beginning
"BIA Monitor Is Called for First Time
The RFC destination for the BI accelerator is not yet specified in the
system. Without the relevant entry in RSADMINA, the BIA monitor cannot
be executed. Do you want to enter the RFC destination now?"
Thanks in Advance
Sarath
Edited by: sarath kumar on Aug 21, 2008 9:42 AMHi,
Is there any way i can check bi accelerator installed or not for our bi server.I contacted basis team but they do not have any idea regarding this. but I heard from my ex colleage it is installed. and Reports from one cube is running very fast compared to recently created cube.
Thanks
Sarath
Maybe you are looking for
-
More than half page blank in each page of report.
I am designing CR for Clinical Laboratory. I have multiple page footers in Crystal Report. Those are suppressed and Suppress Blank section is also checked.These page footers are conditionally (When TestId= X) un suppressed in my report. (For Exampl
-
DISPALYING FIELDS IN TABLE CONTROL
HAI, I HAVE WRITTEN CODE TO DISPLAYING THE CONTENTS IN TABLE CONTROL THIS MY CODE. CCONTROLS : TABC TYPE TABLEVIEW USING SCREEN 100. DATA: BEGIN OF WA_ITAB, NAMES TYPE DD03L-FIELDNAME, END OF WA_ITAB. DATA: TABLE1(7) TYPE C. DATA: PROGR
-
In java program, how do triger events according to schedule.
I want to use java to develop a program which can triger some tasks(such as backup) at specified time defined by users. But as a new comer to java language, currently I don't have any ideas to implement it. Would any buddy give me some advises? Thank
-
ACR 5.2 camera profiles and Nikon D700 color artifacts
Using LR 2.2 or Photoshop CS4, conversions of D700 NEFs often result in peculiar color 'artifacts' (posterization?) in certain images, when using the new camera specific profiles like Camera Standard (or particularly Camera Landscape). Typically, the
-
Dear All, For some of our prominent customers we have designed specific PLD of Delivery Note document, but while taking print out we have to select that PLD and then take the print out. Can it be possible to set Default PLD for customer or let say