How to create Presentation Variable in OBIEE 11g

Hi,
Can any one tell me how to create a Presentation Variable. I know about the creation of Session and Reporsitory variables.
Is it to be created in the Edit formula of the column in criteria tab.
Thanks

Hi,
Refer : http://gerardnico.com/wiki/dat/obiee/presentation_variable_initialization
Thanks
Aravind

Similar Messages

Presentation Variable in obiee 11g

Hi all ,
I had a dashboard report with year , quarter , month and order type name as prompts .
Now my client requirement is , when order type name is "Ord" , the reports with order type name starting with 'ORD" should be displayed.
In simple i know we will use " Like" operator .
But now my problem is we have to assign a presentation variable for order type name.
So can some one tell me how to add a presentation variable in OBIEE 11g , i tried in web , but none of it helped me to finish the job ,, since i am very new to obiee can some one please explain me in non technical language
Thank you for your help

Hi Jay , Thank you very much for reply , now i got a little idea , but few doubts abt ur reply .
Yes i will edit dashboard prompt and assign a like operator and will save the prompt , but when editing the report , you said to apply a filter *LIKE @{presentation_variable}{default_value}%*
In the above what will be in place of presentation_variable and what should be in default_value.
I have tried it in this way : Like @{Sales Order Lines Order Type Name} , where Sales Order Lines Order Type Name is my dashboard prompt .
but it didn't worked when i have given 'Ord' in dashboard prompt the error says: Sales Order Lines Order Type Name is LIKE (pattern match) ord

How to create Presentation variable for columns and to use it in Narrative?

Hi All,
Anybody know how to create presentation variable for a column (i.e., i need to create it in edit formula section itself). And then, I should use it in Narrative section to display that column value. Is it possible? Or do i need to use any other variable for this requirement? If so please let me know, how to create it? This is very urgent requirement.
Thanks in Advance
Thenmozhi

Hi Satya,
I just want to create a table that should horizontally display the values like below:
     SUID Tag # :123456               Year Mfg: 2007
     Description: computer corporation FA ID#: 4576
     Model Number: 4569 hESC: #ert
     Serial Number: 78945 Flags: c
Department: Hematology
User: thenmozhi
Database: OLAP
I think we can create this type of report using either Narrative or Static Text. But I am not sure whether it is possible or not? And also another thing is that sectioning is applied for SUID Tag # column. So, depending on the dashboard prompt if the SUID Tag # retrieves two or more values.
Then the first value for example 123456     and the values for the other columns related to this SUID Tag # value should display in the first page (i.e., page 1). And if the next value of the SUID Tag # for example say 678901 then the values should move to second page that is like this:
     SUID Tag # :678901               Year Mfg: 2008
     Description: Computer Manufacturing FA ID#: 4577
     Model Number: 4570 hESC: #eth
     Serial Number: 78946 Flags: G
Department: Hematology
User: Rehman
Database: OLAP
Thanks
Thenmozhi

Using presentation variable in OBIEE 11g

Hi,
Is is possible to use a prompt to filter data from two sections of a dashboard?
My dashbaords contains two sections , each pointing to seperate reoport. Can I filter data in the two reports using parameter selected in one prompt?
If not possible , the wht is the way to achieve this.
Thanks and Regards
Santosh

Thanks Rondo,
In our project we have e-Biz Oracle ERP application where actuals are captured. Customer is using a third pary tool called Neotix to buid RPD automatically based on Database (oracle) of this application.
Nw we are building new application for planning and budgeting in Hyperion prodicut by oracle where Database is Essbase. I will be creating an RPD for budget/planning reports based on Essbase data source.
For creating on report for Actual Vs Budget, I need to have both Actuals data from e-Biz and Budget data from Hyperion comming out of one RPD.
So I want to merge those two RPDs and build by Actual vs Budget report based on the Business model from this merged RPD.
I want to understand hw to build the buisness model in the merged RPD so that I can get the acutal and budget data together in the same report using Answers. I am using OBIE 11g.
Please tell me wht should be my reporting strategy for achieving this. Can I create single business model for two dataa source which I will import in phyisical layer? How Do I join the two data sources in my RPD, in the business model? What are the challanges to do this kind of model in the merged RPD. ? Do u think there will be challanges to joing Essbabase members (since it is multidimensional cube ) with e-Biz data source in physical layer?
If I build multiple subjects area (one for e-Biz datasouce and another for Essbase data souce) what modeling steps, I need to implement in presentation layer of the merged RPD?
In answers how to I build report so that actual and budget data can be displayed together? Are there any technical challanges to implement such report in Answer? If yes, then what are the ulternative approaches?
I came to know that if it is not possible to get both actual and budet data together in one report, then I should build a dashboard with two sections , and build two reports (one for actuals data and another for dudget data ) and then place one report in one section and another section in another section in the dashboard. Is it a good approach? Is there any better approach?
I want to use one prompt to filter data for actuals and budget . eg. for year 2012, I want to dislpay Actuals as well as Budet values?
Please provide your expert inputs...
Thanks and Regards
Santosh

How to pass presentation variable with enclosing single quotes

HI All,
As all of you know in 11g, Presentation variable can hold more than one value.So we can pass multiple values to the report through presentation variable.
If we select x,y,z values from prompt drop down,then those values will be stored like x,y,z in the presentation variable.
but I would like to store these values with enclosing single quotes like 'x,y,z'
The reason is I need to pass this variable value as input to BI Publisher sql dataset query where clause.
Please share your Ideas.
Thanks,
Aravind

Aravind,
Check this
Predefined Presentation Variables in OBIEE 11G | Praveen&#039;s Blog

Error while Creating Presentation variable

Hi,I am new to OBIEE
I am facing this error:
"A numeric value was expected (received "max("Sales Measures".Dollars)").
Error Details
Error Codes: EHWH2A7E"
1.I am using paint rpd.I want to use presentation variable.
2.So i took two column in criteria 1.Region 2. Dollars
3.In Dollars edit formula ,I created presentation variable i.e. @{Doller_presentation}{max("Sales Measures".Dollars)} in the column formula.
4.And In the same column i use filter
Add ->presentation variable->variable exp =Doller_presentation and default =max("Sales Measures".Dollars)
5.I have added this request on dashboard page,but error is coming.
6.Also i have created dashboard prompt,
Set presentation variable to "Doller_presentation"
and in column formula :@{Doller_presentation}{max("Sales Measures".Dollars)}
and took that prompt on the same dashboard page.
so promt with 2 values are coming.1.All choces 2.13087528..may be ths is max value of dollar but on click its showing error as
"Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 42021] The query does not reference any tables. (HY000)
SQL Issued: SELECT 13087529 FROM Paint ORDER BY 1"
I am confuse abt use of presentation variable
Please Help,
Thanks
Kapil
[email protected]
Edited by: user13098263 on May 9, 2010 10:58 PM
Edited by: user13098263 on May 9, 2010 11:01 PM
Edited by: user13098263 on May 9, 2010 11:02 PM
Edited by: user13098263 on May 9, 2010 11:04 PM

Hi Rachit
You answered my doubt.This one really works . Thanks a lot !
But i have one more doubt i.e if have created the Presentation variable in the dashboard prompt and I want to use it in a report
i.e the scenario is If I have created a new column i.e " Revised Salary " in the Presentation Services and want the values to be entered there dynamically upon end users choice. For ex the end user selecrts value of 1 then the report would display an increament of 500 to all the employees in the " Revised Salary " column and if the end user select value of 2 .. the report would display a decrement of 500 in the " Revised salary column".
I am getting the following error :
========================================================================
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 59001] Binary Logical operation is not permitted on VARBINARY, INTEGER operand(s). (HY000)
SQL Issued: SELECT "D0 Time"."T05 Per Name Year" saw_0, "D2 Market"."M04 Region" saw_1, "D4 Product"."P01 Product" saw_2, "D1 Customer"."C1 Cust Name" saw_3, "F1 Revenue"."1-01 Revenue (Sum All)" saw_4, CASE WHEN 0='1' then "F1 Revenue"."1-01 Revenue (Sum All)" +500 else "F1 Revenue"."1-01 Revenue (Sum All)" - 500 end saw_5 FROM "Sample Sales" ORDER BY saw_0, saw_1, saw_2, saw_3
========================================================================
Please NOTE : The column on which I want to do an increament is : "F1 Revenue"."1-01 Revenue (Sum All)"
Thanks

Error while creating presentation variable in Dashboard prompts.

Hi Team
I have been going through the guidelines and procedures to create a presentation variable to use it in the dashboard prompt ( mentioned in the previous blogs ) .I followed the below link :
http://oraclebi.blog.com/example-of-presentation-variable-in-obiee/
I am using the following query :
========================================================
SELECT case when 1=0 then "D2 Market"."M04 Region"
else 1
end
FROM "Sample Sales"
UNION ALL
select case when 1=0 then "D2 Market"."M04 Region"
else 2
end
FROM "Sample Sales"
=========================================================
I just wanted to create 2 dummy choices i.e 1 and 2 .But while soing so I am getting erros in the case statements :
=========================================================
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27005] Unresolved column: "D2 Market"."M04 Region". (HY000)
SQL Issued: SELECT case when 1=0 then "D2 Market"."M04 Region" else 1 end FROM "Sample Sales" UNION ALL select case when 1=0 then "D2 Market"."M04 Region" else 2 end FROM "Sample Sales"
=========================================================.
Please suggest and let me know if there is any other method to have 2 chioces in drop down i.e 1 and 2 using SQL statements while creating the dashboard prompts.
Thanks

Hi Rachit
You answered my doubt.This one really works . Thanks a lot !
But i have one more doubt i.e if have created the Presentation variable in the dashboard prompt and I want to use it in a report
i.e the scenario is If I have created a new column i.e " Revised Salary " in the Presentation Services and want the values to be entered there dynamically upon end users choice. For ex the end user selecrts value of 1 then the report would display an increament of 500 to all the employees in the " Revised Salary " column and if the end user select value of 2 .. the report would display a decrement of 500 in the " Revised salary column".
I am getting the following error :
========================================================================
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 59001] Binary Logical operation is not permitted on VARBINARY, INTEGER operand(s). (HY000)
SQL Issued: SELECT "D0 Time"."T05 Per Name Year" saw_0, "D2 Market"."M04 Region" saw_1, "D4 Product"."P01 Product" saw_2, "D1 Customer"."C1 Cust Name" saw_3, "F1 Revenue"."1-01 Revenue (Sum All)" saw_4, CASE WHEN 0='1' then "F1 Revenue"."1-01 Revenue (Sum All)" +500 else "F1 Revenue"."1-01 Revenue (Sum All)" - 500 end saw_5 FROM "Sample Sales" ORDER BY saw_0, saw_1, saw_2, saw_3
========================================================================
Please NOTE : The column on which I want to do an increament is : "F1 Revenue"."1-01 Revenue (Sum All)"
Thanks

Constraints for presentation variable in obiee 10g

Hello Guys,
What are the constraints for presentation variable in obiee 10g?
requirement: I am unable to find the variable option, when i selects CONTAINS operatior, during creating the prompt.

Hi,
In 10g, a dashboard prompt can only set presentation variables when you use the "is equal to/is in" operator. Also, it is not available in case of MultiSelect prompt.
Refer to the below thread for some alternate solutions:
visualize prompt values into report Answer?
Thanks

HOW TO CREATE A VARIABLE IN SAP SCRIPT

HI ALL,
CAN ANYONE TELL ME HOW TO CREATE A VARIABLE IN SAP SCRIPT.
THANK YOU,
BYE
TAKE CARE.

Hi Ravi,
You can use like this
A text in the editor contains the following DEFINE commands:
/: DEFINE &mysymbol& = 'xxx xxx xxxxx xxxx'
&mysymbol&
/: DEFINE &mysymbol& = 'yyyyy yyy yyyy'
/ &mysymbol&
The printed text appears

How to create a variable in BEx 7.0

Hi,
Can anyone please tell me how to create a variable in BEx 7.0
In 3.5, when we right click on a characteristic, we used to get an option for restrict.
I cant find any such option in 7.0

Hi,
Right click on the characteristic 0CALMONTH in the default values or drag it to char. restriction section and say restrict.Pull the drop down menu in that to select variables. There u will get a create icon.Click on that...then in details tab u can specify whether mandatory,interval and all..
Regards,
Rathy

Unable to start presentation services , in OBIEE 11g

Hi ,
Unable to start presentation services , in OBIEE 11g :
[2013-01-18T13:38:49.000+05:30] [OBIPS] [INCIDENT_ERROR:1] [] [saw.webextensionbase.init] [ecid: ] [tid: ] Invalid item /system/mktgcache/01HW447397/sawguidstate.[[
File:catalogimpl.cpp
Line:660
Location:
     saw.webextensionbase.init
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.sawserver

Follow the steps below:
1.Shutdown all OBIEE services.
2.Replace the files sawguidstate and sawguidstate.atrin the location:
<Instance_Home>\instances\<instance_name>\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\<project>\root\system\mktgcache\<name>
with the same files from a backup or from another working instance.
3.Restart all OBIEE services.

How to create selection variables on the KF

Hi,
i need to create a variable on the CKF and the user is going to give the selections like >90% or <100% in the variable screen before runing the report.on the report should show the values based on the selection.
1.how to create the variables on the CKF.
2. how to restrict the values and give the selections(like >90%,<100%) values in the selections.

Hi Venkat,
You can achieve this by the following way:
1. Create a CKF or a local formula(based on which queries it needs to be used)
2. Then go to BEX Query Designer -> View -> Conditions
3. Create New Condition -> select 'New' -> Select your CKF/Local Formula -> Define your Operator ( BT, GT, LT, Top % etc.) -> Create a Formula variable (Ready for input with Processing type as ;manual Input')
4. DO the char. assignement for the condition with your condition definition
4. Execute the report with your values.
This will solve your prob.
Cheers,
VA

For Mayank Guptha : how to create formula variable in IP

Hi,
How to create formula variable, such that it will appear in the variable screen.

Hi,
the variables you create in formula function are local to the function.
Ex., DATA CST_ELMNT TYPE 0COSTELMNT.
DATA QTY TYPE 0QUANTITY.
To get the variables listed in the variable screen you need o create variables at aggregation/filter level for the required characteristics.

How to create replacement variable

Hi,
Any one has idea how to create replacement variable in bps.
I need to pass one variable value to another.\
Because both the fields are fields to be change. But user does not want to do double entry.
So need to pass one value from another. Is there any way. I can fix this issue.
Thanks
Naman Shah

So far not found any answer so closing

How to create the variable variant in process chains for ip

how to create the variable variant in process cahins for ip

Hi venky,
check these links
http://help.sap.com/saphelp_nw70/helpdata/EN/c0/980398e58611d194cc00a0c94260a5/content.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/c0/98038ce58611d194cc00a0c94260a5/content.htm
bhaskar

How to create Presentation Variable in OBIEE 11g

Similar Messages

Maybe you are looking for