How to create Process level configuration for RFx N-step approval in SRM7.0

Hello experts,
Can any body guide me to create the Process schema for N-level approval in RFx.
My requirement is based on RFx target value, Document type N some custom fields like (Mode of Tendering).
For this purpose, we are going to maintain one custom table with the above said fields like If the value falls under $1000 with the Tender mode as '101' N the Document type as 'BID' then need to go for 2 level approval like that.........
Appreciate your quick reply.
Regards,
Krishna Prasad M.

You can just add the process levels one by one and change the agent (approver)
I realized this as the following:
For BUS2200
Process Schema: 9EV_RFQ_00S (Returns the constant : 9C_BUS2200_EX01)
In 9C_BUS2200_EX01
There is only two levels in the standard, one is the manager approval , the other is the auto-approval.
I added one after the first one , and change the "Resp. Resolver Name" to "RR_MANAGER_OF_MANAGER".
Wish it helpful.
Regards,
WuLin.

Similar Messages

How to create process task adaptor for Manager DN for OID?

Thanks in advance,
We are trying to get provision users in OID and need to populate manager DN. We created pre-populated Rule generator adaptor to create user in OID. We used utility task and concat cn=managerid and ",, cn=users,dc=mycompany,dc=com." it work great at the time of user creation. Now we are trying to build "process task" adaptor in same way but it is failing and complaining about users not exist.
I used same way to build process task adaptor as I did for prepoulate rule generator only difference it selected "Process task" at the time of creation. I am new to OIM and trying to get some details. Please let me know if I am missing something.
If you already build process task adaptor to create users in OID with single location, I will appreciate that if you share with me.
Example cn=user1, cn=users,dc=mycompany,dc=com.
Thanks,
-Ishaq

Hi
You have changed the manager DN in Trusted Resource and you are able to update this information in OIM also. Now you want to update this manager DN in OID.
If this your requirement then following link may help you
OIM password
Or in this task you can write your java code to update the process form attached with the provisioning process of user.
It should work.

How to create lower-level item for delivery with TO confirmation.

Hi Gurus,
I am writing batch to the delivery item after confirming the Transfer Order. According to the TO quantity, SAP splits the items and makes a "Lower-Level" item.
SAP does that splitting if the TO quantity is lower that the delivery item quantity.
What i want is that, i need SAP to create a lower-level item even if the TO corresponds the delivery quantity.
Is there a customizing for that?

That is a standard behavior where the line split occurs in the delivery when the delivery quantity is not equal to picked quantity. Since, the header line indicates the remainder of the quantity in case of short pick. This behavior also occurs when you are writing multiple batches despite the delivery quantity equals to the picking quantity.
Essentially, you'd see a single line when there a full pick and a single batch. If you still want to get this split then you can pick the batch in the delivery via 'batch split' (so that the line item is created) and then create a TO.

How to create a custom measure for each level of a dimension

Hi all!
Can Anyone please explain me with an example, how to create a custom measure for each level for a dimension? I dont mine if you use
one or more measures.
thanks in advance
hope someone helps me.

For example:I create a dimension for product_dim witch has 4 levels:total, class, family and item:
d_aben18
n1_aben18
n2_aben18
n3_aben18
n4_aben18
herarchy:h_aben18
cube:cubo_aben18
measure:med_aben18
I create this code to fetch the data to the dimension:
TRAP ON CLEANUP
SQL DECLARE c1 CURSOR FOR SELECT-
total_product_id,1,'N1_ABEN18',total_product_dsc,-
class_id,1,'N2_ABEN18',total_product_id,class_dsc,-
family_id,1,'N3_ABEN18', class_id, family_dsc,-
item_id,1,'N4_ABEN18',family_id,item_dsc-
FROM PRODUCT_DIM
"OPEN THE CURSOR
SQL OPEN c1
"FETCH THE DATA
SQL FETCH c1 LOOP INTO-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N1_aben18_LEVELDEF,:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N2_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N3_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N4_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
"SAVE THE CHANGES
UPDATE
COMMIT
CLEANUP:
SQL CLOSE c1
SHOW 'KK2'
Then I create a cube with use compression off, and in rules sum for example.
After, I create a measure and I select Override the aggregation specification for the cube, in rules I put nonadditive and I would like to create aprogram to assign distinct values to each level of the dimension. For example, I put 1, 2 3, and 4 values, but at the end I would like to put count(distinct(values)).
for that I create another program:
VRB D_RETURN DECIMAL
if D_ABEN18_N1_ABEN18_LEVELDEF eq 'N1_ABEN18'
then D_RETURN = 1
if D_ABEN18_N2_ABEN18_LEVELDEF eq 'N2_ABEN18'
then D_RETURN = 2
if D_ABEN18_N3_ABEN18_LEVELDEF eq 'N3_ABEN18'
then D_RETURN = 3
if D_ABEN18_N4_ABEN18_LEVELDEF eq 'N4_ABEN18'
then D_RETURN = 4
else d_return=26
return d_return
"SHOW D_RETURN
cubo_aben18_med_aben18_stored=d_return
but it doesnt work.I dont know how to put to assign or to see what I want.
I report the measure, or I report the program, but then how can I see the values of the measure?
thanks in advance

How to create a new field for Q3 - QM notification in Header and item level

Dear All,
l
Sub: How to create a new field for Q3 - QM notification in Header and item level
Ref. the link --> Quality Notification
We want to create a new field in header level and item level.
As per the thread the solution is given below.
In the IMG Config: Quality Management -> Quality Notification -> Notification Types -> Define screen areas for notification types Then Choose 'Define screen areas' Then Click on 'New entries' button Now, select the relevant Notification Type and click in 'Enter'. Select the 'Iten Cases' register and remember to setup the Tabstrip Header, Icon, etc. Set the 'Tabstrip active' flag. Then Save.
Quality Notification -> Notification Types -> Define screen areas for notification types
WE ARE UNABLE TO FIND IN CUSTOMIZATION PATH --> DEFINE SCREEN AREAS FOR NOTIFICATION TYPES.
Please help.
Question No. 2 :
THE REQUIREMENT IS GIVEN BELOW.
We want to hide the field in Q3 - QM Notification
In header --> Reference tab --> Item (sub heading) --> "DEFECT LOCATION" FIELD TO BE ELIMINATED (HIDE)
Ref the link --> Quality notification
The solutiion is given below.
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
By double clicking the "DEFECTIVE QUANTITY (EXTERNAL), WE COULD NOT GET --> field TXTCDOT .
Plese do the needful.
We are using ECC6.0 Ehp3 and Ehp4.
With Best Regards,
Raghu Sharma

Dear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma

How to create Process chain for Aggregate for Master data

Hello friends,
I created Aggregates on Navigational Attributes.
Now they are working fine, but i need to know that how shall i create the Roll up for Aggregates on Navigational Attributes.
The point is the master data changes frequently a lot of time for e.g. for 0customer etc.....
So if any one can send me the step by step documents so as to know how to roll up the Aggregates for Navigation attributes or for aggregates created on Master data....
How to create process chains for the same ?????????
Because if master data changes, then rolling up the aggregates straight forward will not help.
So we need to write a process chain so that it deactivates the aggregate and reactivate again and fill up again..........
If i mis interpreted something please rectify it.......
Please advise

Hello,
the changerun that you have to schedule in order to activate the master data will adjust the aggregates automatically. There is no need to deactivate them after master data loads.
Best regards,
Ralf

How to create a new Condition for tax as VAT ( 4 % ) in SAP ? .

Dear All ,
Pl guide that " How to create a new Condition for tax as VAT ( 4 % ) in SAP ? . What are all necessary requirements to do so , I need to have all steps so that i should feel very confident . For example what data is to be ticked in Control tab during cond. creation , in the same way how to put this cond. in Pricing procedure ? pl write all necessary thing which are required during this process .
Thanx & deep regrads to all in adv.
sap11

In tax we can configure taxprocedure two types i.e., taxinn and tainj. If you adopt taxinn procedure if it is other than VAT condition first you have to create the condition type and then you have to go to FTXP and assign the tax required VAT percentage to the repective % to ded or non ded VAT condion type. In second step you have to assign this tax code to respective company code.
If you adopt taxinj procedure you have to a create tax code with FTXP T-code by assigning the values to the respective and save conditions.
Regards,
Bhuvan

How to create process variant in process chain

What is a process variant? i try to add Infocube compression to the fi process chain. To accomplish this task, i have to create process variant. please tell me the step by step process how to create process variant and successfully add the compression to the process chain. Can i do it directly in production? Thanks to SDN community that i can count on.

Hi Rafi,
<b>Process variants</b>
The process variant is the name of the process Within the process chain context, it displays the configuration of a process of a particular type set at the time of definition. A variant is only consistently defined together with the process type. A process can have various variants. With the load process for example, the name of the InfoPackage is the name of the process variant.
The user defines the process variant at the time when the process is scheduled. With some process types, the variants are determined internally and are stored as GUIDs.
For more info:
Process Chains
http://help.sap.com/saphelp_nw04/helpdata/en/8f/c08b3baaa59649e10000000a11402f/content.htm
Processes
http://help.sap.com/saphelp_nw04/helpdata/en/7b/d4313b38bea774e10000000a114084/content.htm
Including InfoCubes in Process Chains
http://help.sap.com/saphelp_nw04/helpdata/en/d5/e80d3dbd82f72ce10000000a114084/content.htm
You can create process chains directly in Production. Most of the times system allows(depends on system settings). But this is not a proper way of working. Create in Development and transport it to Production.
Hope it Helps
Srini

How to create a credit memo for an existing sales order !

Can any body help for how to create a credit memo for an existing sales order !

Hi,
It is actually possible to create credit memos from sales orders though it is not followed in most of the scenarios.
We have got a scenario in commodity trading that a sales order will be created with positive value. Once the swaps are settled by the portfolio mngt team, if we have to give some money to the payer, then a credit memo will be greated (as in their case all invoices will have only +ve value as net value) with reference to the sales order. In the copy control, the main field to be taken care of at itme level is the PRICING TYPE for which a value of F has to be maintained. This will convert the sign of the values and fix them. Now a credit memo will be created for teh saels order.
In this case, the document cateogyr of sales order will be C in VBAK, but it will be K in VBFA table which is the table for document flow.
Hope this answers your question. You can reward if it helps you.
Otherwise the normal process is
SALES ORDER---INVOICECREDIT MEMO REQUEST----CREDIT MEMO

How to create different log files for each of web applications deployed in OC4J

Hi All,
I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
1. how to create different log files for each of my deployed web applications ?
2. what are the advantages in running multiple instances of oc4j and in what case we should run
multiple instances of OC4J ?
3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
Thanks and Regards,
Kumar.

Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi.

How to create a account key for application type M ?

Hi Guys,
How to create a account key for application type M ? and link the same with
Gl account.
thanks.

Hi
Please create the account keys or transaction keys in
SPRO-> IMG-> MM-> Purchasing-> Conditions-> Define Price Determination Process-> Define Transaction/Event Keys
Thanks & Regards
Kishore

How to create an Internal Customer for Ineterplant stock Transfer

Daer Gurus,
Please tell me how to create an Internal Customer for Interplant stock transfer.
Actually I have three plants out of them two plants are providing goods to third plant. Also both the plants do the stock transfer in eachother.
How to maintain the Two plants as supplier and third one as a receiver plant.
which account group I should use and what details I have to use for it ? Do I need to maintain all three plants under same account group? I know the theoratical process only for stock transfer please guide me on this Internal customer issue.
thanks in advance
regards,
Sanjay

Hi,
Take your three plants as AAAA, BBBB and CCCC.... and these 3 plants may be assigned to the Sales Area of AAA 10 10, BBB 10 10 and CCC 10 10.
Your STO will have following 4 flows.
1. AAAA - CCCC
2. AAAA - BBBB
3. BBBB- CCCC
4. BBBB- AAAA
you need to do the following settings...
1. Assign the Sales Area for the Shipping Plants... for ex (AAAA - AAA 10 10 and BBBB - BBB 10 10)
2. You need to Create a Internal Customer for every Rec. Plant and need to assign the same to the Rec Plant. And Also note that this customer needs to be created in the Sales Area which is assigned in the Shipping Plant.
(Note that CCCC will be Rec Plant from Both AAAA and BBBB... So you need to extend that customer for both the Sales Area of the plants AAAA and BBBB)
Following is the example settings required for our scenario 1.
AAAA will be a supplying plant and CCCC will be rec. plant.... for this you need to create a internal Customer (for ex C1000) in Sales area AAA 10 10 (which is assigned to the plant AAAA) and assign the Customer number (C1000) to Plant CCCC.
Now you created a plant CCCC as a customer in Sales Area AAA 10 10 (which is nothing but plant AAAA)...
Also here you need assign the Sales Area AAA 10 10 to the Plant AAAA.
Hope this will be useful to you.
Thanks,
Muthu

How to create multi garnishment order for the same garnishment document

Hi,
Can anyone tell me how to create multi garnishment order for the same garnishment document. I tried to copy the entry in IT0195 but the sequence field is grayed out so it will just delete the old record. What configuration should I do to make this possible?
Thanks a lot in advance.

hi,
As far as I got it.
You cannot have multiple Garnishment order but if a need arises you have to maintain it in IT216.
For that follow this path goto PA30->pernr->194->change->Garnishment->adjustment.
Since like order you cannot maintain adjustment also directly.
Regards,
Amit
Reward all helpful replies.

How to create a new row for a VO based on values from another VO?

Hi, experts.
in jdev 11.1.2.3,
How to create a new row for VO1 based on values from another VO2 in the same page?
and in my use case it's preferable to do this from the UI rather than from business logic layer(EO).
Also I have read Frank Nimphius' following blog,but in his example the source VO and the destination VO are the same.
How-to declaratively create new table rows based on existing row content (20-NOV-2008)
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/13-create-with-params-169140.pdf
I have tried:
1.VO1(id,amount,remark1) and VO2(id,amount,remark2) are based on different EO,but render in same page,
2.Drag and drop a Createwithparams button for VO1(id,amount,remark),
3.add: Create insertinside Createwithparams->Nameddata(amount),
4.set NDName:amount, NDValue:#{bindings.VO2.children.Amount}, NDtype:oracle.jbo.domain.Number.
On running,when press button Createwithparams, cannot create a new row for VO1, and get error msg:
<Utils> <buildFacesMessage> ADF: Adding the following JSF error message: For input string: "Amount"
java.lang.NumberFormatException: For input string: "Amount"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
Can anyone give some suggestions?
Thanks in advance.
bao
Edited by: user6715237 on 2013-4-19 下午9:29

Hi,CM,
I'm really very appreciated for your quick reply! You know, today is Saturday, it's not a day for everyone at work.
My principal requirement is as follows:
1.select/check some rows from VO2, and for each selection create a new row with some attributes from VO2 as default values for VO1's corresponding attributes, and during this process the user may be cancel/uncheck or redo some of the selections.
--so it's better to implement it in UI rather than in EO.
2.it's better to implement this function with declarative way as in Frank Nimphius' blog.
--little Jave/JS coding, the better. I only have experience in ORACLE FORMS, little experience in JAVA/JS.
In order to get full information for the requirements of my use case, can take a check at:
How to set default value for a VO query bind variable in a jspx page?
(the end half of the thread: I have a more realworld requirement similar to the above requirement is:
Manage bank transactions for clients. and give invoices to clients according to their transaction records. One invoice can contain one or many transactions records. and one transaction records can be split into many invoices.
Regards
bao
Edited by: user6715237 on 2013-4-19 下午11:18
JAVE->JAVA

Step by step on how to create organizational structure(plan) for workflow?

Hi Experts,
Can anyone send me a step by step process on how to create organizational structure(plan) for workflow?
Thanks a lot in advance.
Rgds,
TM

Hi,
You can use the following accessible transactions to process your organizational plan:
Transaction     Name of Transaction
PPO5                     Change Attributes
PPO6                     Display Attributes
PPOCE                      Create Organization and Staffing
PPOCW                      Create Organization and Staffing (WF)
PPOME                     Change Organization and Staffing
PPOMW                     Change Organization and Staffing (WF)
PPOSE                      Display Organization and Staffing
PPOSW                      Display Organization and Staffing (WF)
PP01                      Maintain Plan Data (Menu)
PP01_DISP      Display Plan Data (Menu)
PP03                       Maintain Plan Data (Actions)
PP03                       Execute Action Directly
Regards,
Deepa Kulkarni

How to create Process level configuration for RFx N-step approval in SRM7.0

Similar Messages

Maybe you are looking for