How to create project using JAX-ws 2.0 in My-eclipse

Hi Friend,
I want to create one application in which i want to use JAX-WS 2.0 by using IDE Myeclipse.
I want to know wether myeclipse will support JAX-WS 2.0 Or not.
If Yes then please guide me How can i go ahead .
I tried to create WEB services project using Myeclipse but it is using XFire .
Which i want to avoid . I want it without using XFire.

I found out that deployment is specified in different JSR (109). I quickly browsed through that specification and found out that basically everything except @WebService annotation is optional. So should a Java EE 5 compliant server publish the service automatically, just by adding that @WebService annotation? That didn't seem to be the case at least in Geronimo 2.0.2.

Similar Messages

While creating Projects Using the API, get two errors: 'Customer name must be passed' and 'class category is invalid'

Hi
While trying to Create Projects using the API, I'm getting two types of errors -
The first is : 'API failed in one stage 1 Customer Name is a mandatory Quick Entry field. Value must be passed'
The second is : '
'API failed in one stage 1 Project: '<Project_Number>'
The class category is invalid.'
Both the messages are produced by our custom program. .. however I am not able to understand why the underlying errors occur.
The first error ( Customer Name is a mandatory quick entry field), is caused by Projects that are to be created from Project templates where it is configured with Quick Entry Customer Name required. We are passing Customer Site number ( Party Bill to site number and Party Ship to side number). The site numbers being passed are also set as 'Primary'. Yet they are failing.
For the second Error ( The Class Category is invalid), I rechecked multiple times, the Class categories for the Projects I am trying to create, with the Config in R12 and they are fine. Can't understand the reason for these two issues. Has anyone encountered such an issue ? If so how was it resolved?
Regards
Vivek

HI All
I resolved both the issues. In case there are others facing similar issues, following was the cause and resolution of my errors
1. Error 1: Customer Name is a Mandatory Quick Entry field. Value must be passed.
The cause was that the data loaded into our custom staging table was not in the right fields. This was because the data file values and the CTL were not in sync.
Resolution:
Corrected the data file to be in Sync with the structure defined in the CTL and this loaded it successfully
2. Error 2: The class category is invalid.
The cause of this error was that in the Projects Template (used to create the project from), the Quick Entry setup had a Class Category set as required and I was not passing a value ( a class code value) for that Class Category.
Hope this helps somebody else
Cheers
Turnbill

How to create and use dynamic queue in JMS

Plz tell me how to create and use a dynamic queue in jms and can reciever file lookup it as it lookup any server configurred queue(written in the server).

Hi,
We can use Azure File services to do this, for more information, please have a look at this article:
http://blogs.msdn.com/b/windowsazurestorage/archive/2014/05/12/introducing-microsoft-azure-file-service.aspx. The Azure File service exposes file shares using the standard SMB 2.1 protocol. Applications running in Azure can now easily share files between
VMs using standard and familiar file system APIs like ReadFile and WriteFile.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to create project in nwds 7.3

Hi
I imported development track in to nwds 7.3.
How to create project from track , because before this i use 7.0 & 7.1 , there i found inactive dc then created project.
i unale to found inactive dc in 7.3

Hi,
CMS inbox can be figured out this way:
1. go to CMS webui -- Landscape Configurator -- Domain Data tab.
2. notice the path entered into the field Transport folder.
3. your CMS inbox is then <Transport folder>/CMS/inbox
Now make sure the required SCAs are available in this folder, and then go to the CMS webui- Transport studio -- select the track -- on "Check-In" tab check in the SCs, and make sure you import them to both Development and Consolidation. Only after this will you able to create a DC in your NWDS, otherwise everything will be grayed out.
I hope this helps.
Regards,
Ervin

How to create crossword using Adobe captivate

how to create crossword using Adobe captivate

OK. Again I am not needing clarification here. Did you INSERT the SWF as an animation into the Captivate project? Or, did you keep the SWF as an external file? If the SWF is external to the main Cp SWF then perhaps it's not working when you publish because the content cannot find the SWF. If you have made sure that the SWF is definitely in the publish location, check whether or not you have that location set as a trusted location in your Flash Global Security settings.

How to create and use mutable array of UInt8

Hello!
If I get it right, UInt8 *buffer, buffer - is a pointer to a start of array?
Then how to create and use mutable array of UInt8 pointers?
The main target is a creation of the module that will store some byte array requests and will send all of them at the propriate moment.

I try
- (void) scheduleRequest:(UInt8 *)request {
if (!scheduledRequests) scheduledRequests = [[NSMutableArray array] retain];
[scheduledRequests addObject:request];
But get warning:"passing argument 1 of 'addObject:' from incompatible pointer type"

HOW TO CREATE and USE EVENTS IN WORKFLOWS .

HOW TO CREATE and USE EVENTS IN WORKFLOWS with the help of classes.
What i am doing is..
open se24
event tab->event name->parameters
method tab->method name->event handler->copy parameters
interface tab->if_workflow->enter
tell me what else to do step by step
Another important thing is that HOW to use these class events to trigger the workflows.
REPLY ASAP
THXS IN ADVANCE

Hi,
Pl. see this blog...
Raising ABAP OO events for workflow
Regards,
JOy.

How to Create and use of Coherence servers in weblogic serevr 11g (10.3.6)?

how to Create and use of Coherence servers in weblogic serevr 11g (10.3.6)?

See the below discussion
How to create and use Webservice controls using WSDL in weblogic portal10.3
Thanks,
Venkat Sarvabatla

Requesting all to help me how to create lsmw using idoc method

hi
thanx for ur answer
requesting every body in the forum to help me how to create lsmw using idoc method.
regards,
balaji

Hi Balaji,
LSMW using IDOC is similar to using flat file method. Here you are getting data from IDOC container and mapping data with Idoc segments insted of flatfile column.
Hope this is what you are looking for. If helpful then dont forget to reward me for that
Darshan

How to create database using shell script

hai
how to create database using shell script

The documentation details the steps to create a database manually. Another option is to use DBCA to create the scripts. DBCA will give you a complete set of scripts that will create a database.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14231/create.htm#sthref220

How to create indexes using CREATE TABLE statement

Hi,
Can anyone please tell me how to create indexes using CREATE TABLE staement? This point is part SQL Expert exam (1Z0-047) and please guide me to use which books for this particular exam.
Thanks in advance.

Can anyone please tell me how to create indexes using CREATE TABLE staement?e.g. creating a primary key or a unique constraint will generate indexes along with the create table syntax:
SQL> create table t (a integer primary key, b integer unique)
Table created.
SQL> select   index_name, index_type, uniqueness
from   user_indexes
where   table_name = 'T'
INDEX_NAME                     INDEX_TYPE                  UNIQUENES
SYS_C0016575                   NORMAL                      UNIQUE
SYS_C0016574                   NORMAL                      UNIQUE
2 rows selected.

Not able to create project using tcode solar_project_admin

Hi,
In solution manager, in tcode solar_project_admin - when creating project, say (SOL200), I got message saying that (Project SOL200 already exists) .
from tcode solar_project_admin --> Project -> create.
I can not create any project, whenever I tried to create a project, I get error message saying already exists !! .
Please suggest on how to create project.
Thanks and Regards,
Faris

SAP Note 1540274 will fix this for you.
This error happens when the module SPROJECT_CHECK_EXISTENCE has an error in it.
Plz implement the note to fix the issue.
The error message you get is : SPROJECT303

How to set plant to all WBS when creating Project using Copy Standard Project (CJ20N)

Hello
I have created standard project with several WBS. Now I want t o create operative project in CJ20N by copying standard project. While copying I want that the system allows me to define the plant for which the project is created and it gets automatically copied to project defination and all WBS elements. Since I have around 30 plants, I havent maintained any default plant in Standard project. How I can achive this requirement to specify the plant when creating project so that it is automatically copied to all WBS.
Murad

Hi Murad,
I can see three viable options over here. If you are using the same plant across the project structure (on all the WBS elements) you can then go with the suggestion Saurabh suggested (Defaulting it in the project profile itself). In addition to writing a substitution rule at the PD level, you can also go ahead with the option of mass change in case you have created a project(by copying from an operative project already with some default plant.)? Is something stopping you from carrying out mass change? Please let me know.
Thanks
Varun

Error while creating Project using API - PA_PROJECT_PUB.CREATE_PROJECT

I am working on Projects conversion and currently trying to create a project using the API.
I have recetified all the errors it was giving and struck at 1 error. please find the error message below.
"You have submitted invalid parameters to this process, preventing its successful completion. Please contact your system administrator."
It gives me this error and I was not able to know the cause for this error. Please let me know how to bypass this error and go ahead with projects conversion???
Attached below is my package:
Thanks,
Kesava
=====================================================================================================================
CREATE OR REPLACE PACKAGE xxbwp.xxbwp_pa_proj_conv_pkg AUTHID CURRENT_USER
IS
     PROCEDURE xxbwp_pa_proj_conv_proc(errbuf           OUT      VARCHAR2
                         ,retcode           OUT      VARCHAR2);
END xxbwp_pa_proj_conv_pkg;
CREATE OR REPLACE PACKAGE BODY xxbwp.xxbwp_pa_proj_conv_pkg
IS
     PROCEDURE xxbwp_pa_proj_conv_proc(errbuf           OUT      VARCHAR2
                         ,retcode           OUT      VARCHAR2)
     IS
v_data VARCHAR2(2000);
v_index_out NUMBER;
     v_msg_count               NUMBER;
     v_msg_data               VARCHAR2(2000);
     v_return_status               VARCHAR2(1);
     v_api_version_number          NUMBER          :=     1.0;
     v_commit               VARCHAR2(1)     :=     apps.fnd_api.g_false;
     v_init_msg_list               VARCHAR2(1)     :=      apps.fnd_api.g_false;
     v_workflow_started          VARCHAR2(1)      :=      'Y';
     v_pm_product_code          VARCHAR2(30)      :=      NULL;
     v_op_validate_flag          VARCHAR2(1)      :=      'Y';
     v_project_in               apps.pa_project_pub.project_in_rec_type;
     v_project_out               apps.pa_project_pub.project_out_rec_type;
     v_customers_in               apps.pa_project_pub.customer_tbl_type;
     v_key_members               apps.pa_project_pub.project_role_tbl_type;
     v_class_categories          apps.pa_project_pub.class_category_tbl_type;
     v_tasks_in               apps.pa_project_pub.task_in_tbl_type;
     v_tasks_in_rec apps.pa_project_pub.task_in_rec_type;
v_tasks_out               apps.pa_project_pub.task_out_tbl_type;
     v_org_roles               apps.pa_project_pub.project_role_tbl_type;
     v_structure_in               apps.pa_project_pub.structure_in_rec_type;
     v_ext_attr_tbl_in          apps.pa_project_pub.pa_ext_attr_table_type;
     v_deliverables_in          apps.pa_project_pub.deliverable_in_tbl_type;
     v_deliverable_actions_in     apps.pa_project_pub.action_in_tbl_type;
-- Variables declaration related to project_in_rec_type
l_pm_project_reference VARCHAR2(25);
l_pa_project_id NUMBER;
l_pa_project_number VARCHAR2(25);
l_segment1 VARCHAR2(25);
l_project_name VARCHAR2(30);
l_description VARCHAR2(250);
l_long_name VARCHAR2(240);
l_department_mapping VARCHAR2(50);
l_department_mapping_c VARCHAR2(50);
l_department_mapping_e VARCHAR2(50);
l_created_from_project_id NUMBER;
l_carrying_out_organization_id NUMBER;
l_proj_start_date DATE;
l_completion_date DATE;
l_temp_project_type VARCHAR2(30);
l_company_id VARCHAR2(10);
l_company_id_c VARCHAR2(10);
l_company_id_e VARCHAR2(10);
l_proj_type VARCHAR2(30);
l_cnt NUMBER := 0;
l_task_cnt NUMBER := 0;
l_responsibility_id NUMBER;
l_application_id NUMBER;
l_user_id NUMBER;
l_global_info_msg_count NUMBER;
l_global_info_msg_data VARCHAR2(2000);
l_global_info_return_status VARCHAR2(1);
CURSOR C1 IS
SELECT *
FROM xxbwp.xxbwp_pa_proj_conv_tbl
WHERE proj_type = 'STORAGE';
begin
FOR C1_REC in C1
LOOP
SELECT APPS.pa_projects_s.nextval
INTO l_pa_project_id
FROM DUAL;
BEGIN
SELECT description
               INTO     l_proj_type
               FROM apps.fnd_lookup_values
               WHERE lookup_type = 'BWP_PROJECT_TYPES_LKP'
               AND     lookup_code = C1_REC.proj_type
               AND     1 = 1;
END;
BEGIN
SELECT project_id, project_type, carrying_out_organization_id
INTO l_created_from_project_id, l_temp_project_type, l_carrying_out_organization_id
FROM apps.pa_projects_all
WHERE project_type = l_proj_type
AND template_flag = 'Y';
END;
BEGIN
SELECT rt.responsibility_id, rt.application_id
INTO l_responsibility_id, l_application_id
FROM apps.fnd_responsibility_tl rt
WHERE rt.responsibility_name = 'BWP PA Projects Superuser';
EXCEPTION WHEN OTHERS THEN
RETURN;
END;
BEGIN
SELECT u.user_id
INTO l_user_id
FROM APPS.fnd_user u
WHERE u.user_name = 'CHUNDURK';
EXCEPTION WHEN OTHERS THEN
RETURN;
END;
-- Set the environment
APPS.pa_interface_utils_pub.set_global_info
(p_api_version_number => 1.0
,p_responsibility_id => l_responsibility_id
,p_user_id => l_user_id
,p_resp_appl_id => l_application_id
,p_msg_count => l_global_info_msg_count
,p_msg_data => l_global_info_msg_data
,p_return_status => l_global_info_return_status);
--Assign values to project_in_rec_type
v_project_in.pm_project_reference := C1_REC.PROJ_NUM;
v_project_in.pa_project_id := l_pa_project_id;
v_project_in.pa_project_number := C1_REC.PROJ_NUM;
v_project_in.project_name := C1_REC.PROJ_NAME;
v_project_in.description := NULL;
v_project_in.long_name := C1_REC.PROJ_LONG_NAME;
v_project_in.created_from_project_id := l_created_from_project_id;
v_project_in.carrying_out_organization_id := l_carrying_out_organization_id;
v_project_in.start_date := C1_REC.trans_start_date;
v_project_in.completion_date := C1_REC.trans_end_date;
v_project_in.scheduled_start_date := C1_REC.trans_start_date;
v_project_in.scheduled_finish_date := C1_REC.trans_end_date;
v_project_in.project_status_code := 'APPROVED';
FOR x IN (SELECT person_id, project_role_type, start_date_active, end_date_active
FROM apps.pa_project_players
WHERE project_id = 262)
LOOP
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,'PERSON ID '||x.person_id);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,'PROJECT ROLE TYPE '||x.project_role_type);
l_cnt := l_cnt + 1;
v_key_members(l_cnt).person_id := x.person_id;
v_key_members(l_cnt).project_role_type := x.project_role_type;
v_key_members(l_cnt).start_date := x.start_date_active;
v_key_members(l_cnt).end_date := x.end_date_active;
END LOOP;
-- Retrieving and assigning tasks from template to a project
FOR x IN (SELECT task_id, parent_task_id, task_name, long_task_name, task_number, description,
billable_flag, cint_eligible_flag, chargeable_flag
FROM apps.pa_tasks t
WHERE t.project_id = l_created_from_project_id
START WITH parent_task_id IS NULL CONNECT BY PRIOR task_id = parent_task_id)
LOOP
l_task_cnt := l_task_cnt + 1;
v_tasks_in_rec.pm_task_reference := x.task_id;
v_tasks_in_rec.task_name := x.task_name;
v_tasks_in_rec.long_task_name := x.long_task_name;
v_tasks_in_rec.pa_task_number := x.task_number;
v_tasks_in_rec.task_description := x.description;
v_tasks_in_rec.task_start_date := C1_REC.trans_start_date;
v_tasks_in_rec.task_completion_date := C1_REC.trans_end_date;
v_tasks_in_rec.scheduled_start_date := C1_REC.trans_start_date;
v_tasks_in_rec.scheduled_finish_date := C1_REC.trans_end_date;
v_tasks_in_rec.pm_parent_task_reference := x.parent_task_id;
v_tasks_in_rec.billable_flag := x.billable_flag;
v_tasks_in_rec.cint_eligible_flag := x.cint_eligible_flag;
v_tasks_in_rec.chargeable_flag := x.chargeable_flag;
v_tasks_in_rec.tasks_dff := 'Y';
v_tasks_in_rec.attribute1 := l_pa_project_id;
v_tasks_in(l_task_cnt) := v_tasks_in_rec;
END LOOP;
v_class_categories(0).class_category := 'Reimbursable';
v_class_categories(0).class_code := 'No';
APPS.FND_MSG_PUB.initialize;
apps.pa_project_pub.create_project
(p_api_version_number => v_api_version_number
,p_commit => v_commit
,p_init_msg_list => v_init_msg_list
,p_msg_count => v_msg_count
,p_msg_data => v_msg_data
,p_return_status => v_return_status
,p_workflow_started => v_workflow_started
,p_pm_product_code => v_pm_product_code
,p_op_validate_flag => v_op_validate_flag
,p_project_in => v_project_in
,p_project_out => v_project_out
,p_customers_in => v_customers_in
,p_key_members => v_key_members
,p_class_categories => v_class_categories
,p_tasks_in => v_tasks_in
,p_tasks_out => v_tasks_out
,p_org_roles => v_org_roles
,p_structure_in => v_structure_in
,p_ext_attr_tbl_in => v_ext_attr_tbl_in
,p_deliverables_in => v_deliverables_in
,p_deliverable_actions_in => v_deliverable_actions_in
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_return_status||' '||v_msg_count);
IF v_msg_count > 0 THEN
FOR i in 1 .. v_msg_count
LOOP
apps.pa_interface_utils_pub.get_messages
(p_encoded => 'F'
,p_msg_count => v_msg_count
,p_msg_index => i
,p_msg_data => v_msg_data
,p_data => v_data
,p_msg_index_out => v_index_out);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
END LOOP;
end xxbwp_pa_proj_conv_proc;
end xxbwp_pa_proj_conv_pkg;
show errors;
Edited by: user644005 on Sep 11, 2009 11:02 AM

Hi Kesava,
I notice that in the package you used the application user_name=CHUNDUK calls the API pa_project_pub.create_project.
I wonder if you used chunduk as database user to execute the package Or you used APPS to execute the package?
The APi document states that it is a requirement to create a db username as the same name with the application username.
I have been running the problem to execute API 's delete project and try to figure what could be my problem.
TIA

How to create repository using a view in OBIEE

Hi,
Can any one explain the procedure how to create a repository using a view. For example
test_v
select a.col1,a.col2,b.col1,b.col4,c.col5,c.col6 from table a,table b, table c where a.col1= b.col1 and b.col1 = c.col1
1. Assuming that i have imported only one view.
Thanks and Regards,
Hanuman.

Hi,
You can create the vie in the physical layer of your repository, select "Select" from the dropdwan box when you create a new table. Next add the columns. They must have the same names as in your view.
If you don't have any other tables in your repository, created an alias of your view and make a "dummy" join with the original view. Next create your BM and PL.
regards
John
http://obiee101.blogspot.com/

How to create project using JAX-ws 2.0 in My-eclipse

Similar Messages

Maybe you are looking for