How to create raw partition in a local zone?

I tried to search for an answer for my question, but I spent a week and still no luck.
What I am trying to do is to create raw partitions for Sybase in a local zone. I tried to add device and set match to the block and raw device.
However, when I tried to do "format", I got core dumped. When I did zpool create, I got permission denied. Any advice?
zonecfg:z001> info
zonename: z001
zonepath: /export/ZONE/z001
autoboot: true
pool:
limitpriv:
fs:
dir: /shared/tmp
special: /tmp
raw not specified
type: lofs
options: []
net:
address: 10.110.1.2
physical: e1000g1
device
match: /dev/rdsk/c6t60060160DF2413003E2F0C2DF945DC11d0
device
match: /dev/dsk/c6t60060160DF2413003E2F0C2DF945DC11d0

You can't manipulate pools directly in a non-global zone. I'm not sure if you can run 'format'. You can use at least a limited amount of globbing. You might want to put a '*' at the end of your matched device name.
You can hand off a raw partition via 'match' and put it under UFS control, or with recent versions of Solaris Express, you can delegate a portion of a ZFS filesystem to the zone.
See the ZFS administration guide:
http://www.opensolaris.org/os/community/zfs/docs/zfsadmin.pdf
Especially the section on using ZFS in a zone (page 171). Note the guide is for the most recent version of ZFS in OpenSolaris. Versions available in Solaris 10 may not have all the same features.
Darren

Similar Messages

How to create recovery partition in new(changed) HDD.

my new HP pavilion g4 laptop HDD have crased, then I replce it by HP care. I upload original win 7 by recovery disk(DVD) but when I open my computer it shows only one partition (C drive, there is no recovery partition and HP tool.
So how to creates recovery partition by recovery disk(DVD)...........please help me.

Creating the recovery partition
Right-click the start orb, and start 'Disk Management'.
Shrink the C: drive by let's say 20-30GB.
Then create a new Partition and assign the R: label to it and name it RECOVERY.
Then open command prompt as administrator and type: 'recimg /createimage <directory>',
In this case: 'recimg /createimage R:\' to save it on the new partition.
This step may consume a lot of time.
Now we need to register the newly created recovery image: 'recimg /setcurrent <directory>'
'recimg /setcurrent R:\'
Voila you are done.
Restoring from recovery partition
You may want to use this restoring method by default, because it is the easiest way to do so if your recovery partition is still intact. If not, look at the other recovery methods to see which suits you best. This is usually the way you reset or refresh your Windows installation if you purchase a computer from a brand like Lenovo instead of building one yourself
Press the Windows-key + C to open the charms bar or swipe in from the right.
Click Settings.
Click Change PC Settings.
Click Update & Recovery in the menu on the left.
Click Recovery.
If all your documents are safe and sound in your user folder, you can use Refresh your PC without affecting files. However I still recommend taking a back-up... If you want to do a complete reinstallation of Windows and also clean your user folder in the process then choose Remove everything and reinstall Windows.

How to create GPT Partition for onekey recovery windows8

Plz any one can help me.....
i have purchased laptop last week with following configurations:
Lenovo G510 i5 2.5ghz with windows 8 and OneKey recovery feature.
My laptop was with windows 8 but i upgrade my hard drive 500 GB to 1 TB.
But now i am unable to recover my windows8 image by using OneKeyrecovery (novo).
So plz help me how to craete GPT partition style that will support for onekey recovery and recover Windows 8 image that is in my external hard drive.
Please send me the complete procedure to create GPT partition style supported for onekey recovery.
Also solve the following questions plz.
1. How to create GPT partition style supported for onekey recovery?
2. Total Number of partitions and their actual sizes.
3. Size of C:
4. Size of D:
5. Size of recovery partition
6.Size of all partitions
Plz reply me at: ********@yahoo.com
Regards: Aamir
Moderator note: email address removed to keep away from the spambots.
Solved!
Go to Solution.

Dear Customer
Welcome in lenovo community
Please use the below link to download and install the Lenovo Recovery application so that you can do what you looking for
Link : http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS035708
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How to create DB partitioning in active data tables for ods?

hi all,
Can anyone let me know how to create DB partitioning in active data tables for ods. if any docs pls share with me at my email id : [email protected]
regds
haritha

Haritha,
The following steps will briefly explain you to improve the performance in terms of DB partitioning as well as loading. Please find the same,
transaction RSCUSTA2,
oss note 120253 565725 670208
and remove 'bex reporting' setting in ods if that ods not used for reporting.
hope this helps.
565725
Symptom
This note contains recommendations for improving the load performance of ODS objects in Business Information Warehouse Release 3.0B and 3.1 Content.
Other terms
Business Information Warehouse, ODS object, BW, RSCUSTA2, RSADMINA
Solution
To obtain a good load performance for ODS objects, we recommend that you note the following:
1. Activating data in the ODS object
In the Implementation Guide in the BW Customizing, you can implement different settings under Business Information Warehouse -> General BW settings -> Settings for the ODS object that will improve performance when you activate data in the ODS object.
1. Creating SIDs
The creation of SIDs is time-consuming and may be avoided in the following cases:
a) You should not set the indicator for BEx Reporting if you are only using the ODS object as a data store.Otherwise, SIDs are created for all new characteristic values by setting this indicator.
b) If you are using line items (for example, document number, time stamp and so on) as characteristics in the ODS object, you should mark these as 'Attribute only' in the characteristics maintenance.
SIDs are created at the same time if parallel activation is activated (see above).They are then created using the same number of parallel processes as those set for the activation. However:if you specify a server group or a special server in the Customizing, these specifications only apply to activation and not the creation of SIDs.The creation of SIDs runs on the application server on which the batch job is also running.
1. DB partitioning on the table for active data (technical name:
The process of deleting data from the ODS object may be accelerated by partitioning on the database level.Select the characteristic after which you want deletion to occur as a partitioning criterion.For more details on partitioning database tables, see the database documentation (DBMS CD).Partitioning is supported with the following databases:Oracle, DB2/390, Informix.
1. Indexing
Selection criteria should be used for queries on ODS objects.The existing primary index is used if the key fields are specified.As a result, the characteristic that is accessed more frequently should be left justified.If the key fields are only partially specified in the selection criteria (recognizable in the SQL trace), the query runtime may be optimized by creating additional indexes.You can create these secondary indexes in the ODS object maintenance.
1. Loading unique data records
If you only load unique data records (that is, data records with a one-time key combination) into the ODS object, the load performance will improve if you set the 'Unique data record' indicator in the ODS object maintenance.
Hope this helps..
****Assign Points****
Thanks,
Gattu

How to create a partition on existing table?

Hey
Could some one please tell me on how to create a partition on existing table?

Could some one please tell me on how to create a partition on existing table?
You can't - that isn't possible. Unless a table is already partitioned you can NOT create another partition on it.
You must either redefine the table as a partitioned table (using the DBMS_REDEFINITION package) or create a new partitioned table and move the data to its new partitions.
The choice will depend on how much data the existing table has and whether you can do it offline.

How to share raw partitions on Mac OS X Server ?

Hello,
I'm trying to build a RAC Database with 3 nodes. I have created 2 raw partitions for the OCR and CRS Voting Disk on the local hard drive of node 1.
I read the documentation concerning how to install a RAC Database on Mac OS X Server, but I don't know how to share the 2 raws partitions between my nodes.
Anyone could explain me how to share those raw partitions accross all nodes ?
Regards,
Bob

Good morning Bob,
I guess you refer the the linux firewire solution for rac. It would surprize me if that works for the mac since on linux they created special kernel modules for it to be able to run. When connecting 3 servers you would need a firewire switch. From what I have seen sofar, the mac mounts the firewire drives exclusively and the (linux)kernel modifictions change that to shared allowing multiple servers to connect.
For storage I would definately go for ASM. It makes you choice for storage hardware a bit less critical. Let oracle do what otherwise a highend SAN solution would do. Why are you building the RAC ? If it has a serious goal, get a xserve-RAID. I don't think you can get a better price/performance ratio. What other storage hardware do you have available ? (netapp would be fine ;-))
regards,
Ronald
http://ronr.nl/unix-dba

Creating raw partitions in RHEL5 for 10.2 CRS

Hi all,
I have a few questions about creating multipath raw partitiions in RHEL5. I'm aware that raw is deprecated in RHEL5 and I have read a number of articles published by Oracle on how to utilize udev rules and rc.local to create and set permissions on raw devices in RHEL5. I've had some success binding the raw devices but they do not seem to appear in the designated directory...
ex.)
[root@hostc ~]# /bin/raw /dev/raw/raw1 /dev/mapper/mpath4p2
/dev/raw/raw1: bound to major 253, minor 30
[root@hostc ~]# raw -qa
/dev/raw/raw1: bound to major 253, minor 30
[root@thdalnu3 ~]# ls -ltr /dev/raw/raw1
ls: /dev/raw/raw1: No such file or directory
Wouldn't I expect to see the raw1 device in the /dev/raw direcotry???? There's no /dev/raw directory at all. I tried creating a raw directory in /dev/ and that did not resolve the issue either. Any thoughts?
Thanks,
-Rich

I manually created the "/dev/raw" directory and then created the raw device:
# /bin/mkdir /dev/raw
# /bin/raw /dev/raw/raw1 /dev/hda1and got the {font:Courier}/dev/raw/raw1{font} device I expected. After a reboot the {font:Courier}/dev/raw{font} directory will disappear but a UDEV rule will recreate it. Since raw devices are deprecated, the {font:Courier}/dev/raw{font} directory is your responsibility; you could just as easily (and correctly) place these raw devices anywhere.

How to create a partition using the free space of an existing[SOLVED]

Hi Guys,
Since I could not install fifa 09 using wine on linux, I need to create a partition where I can install windows first in order to install fifa 09 on it. How can I create a partition using the rest free space of my , for example, /home partition?How can I do it in a secure way (meaning without doing something to my existing archlinux installation files and system files) ?
Thanks.
Please see this post:
https://bbs.archlinux.org/viewtopic.php?id=109402
Last edited by Archie_Enthusiasm (2010-12-08 19:23:46)

Use Parted Magic. But you *should* backup any important files just in case, regardless of method you use. You never know. Someone could unplug your computer, a power surge might happen, etc. A cousin of mine actually did something similar while I was gaming, the extension cord has a red button which he "accidentally" pressed. I would've cracked his skull had he done it while resizing a partition.
Anyway, the partitioning scheme should be the first thing you do when you decide go this route (dual booting). I remember about a year ago I forced myself to use Linux by formatting the entire drive to ext4, except for the 2 GB + 20 GB ntfs partitions. It was what kick-started me on this path. Here's my partitioning scheme for both computers, maybe you'll get an idea and do something similar:
Older computer:
2 GB ntfs - MicroXP
8 GB ext4 - Arch Linux + Home dir (to keep the dot files organized in one place)
20 GB ntfs - games partition
Rest is for media, formatted as ext3 with inode 128 (so it can be loaded as Read-Only in Windows too via Ext2fsd so they won't be affected in case of a virus infection)
New computer:
20 GB Windows 7
10 GB Arch Linux + home dir
50 GB games partition
Rest of the space is ext4 mounted to /media
Note that they're all primary partitions for remembering easier (sda1, sda2, sda3, sda4) instead of a combination of primary and extended which would probably look like sda1, sda5, sda6, sda7, etc.
Last edited by DSpider (2010-12-03 13:02:26)

How to create another partition on mac and restore from time machine

I want to create another partition on my macbook running on OS X Yosemite. I want to recover a time machine back up on this partition. Basically this is a backup of my other old PC which I saved on a time machine external hard disk and now I want to create it as a new separate partition which I can log into to as opposed to continuous to connected to it via USB.
Any advise on how I can do that?

Hi Patrick,
Thanks for the that great tip.
In that time machine back up I have some applications for e.g. MS office etc and I wanted it to be like a virtual machine as such that I launch when I want to use the applications, see my data etc....I have bought parallels as that allows you to have multiple virtual machines on your laptop whether these are multiple mac images as time machine backups or linux, Microsoft Windows 7, 8 etc....
Thats what I eventually want to do here...
This feature that you provided is also of good reference for me in future.

How to create a system tablespace as locally manged in 8.1.7

After a good time looking for it I still haven't found an example of how to create a database with the system tablespace as locally managed in release 8.1.7
I'm trying this, that isn't OK at all:
create database CSR
character set "WE8ISO8859P15"
datafile '/home/oracle/create/CSR/system/sysCSR.dbf' size 75M
extent management local
DEFAULT TEMPORARY TABLESPACE tsp_temp
DATAFILE '/home/oracle/create/CSR/temp/tempCSR.dbf'
SIZE 80M REUSE
logfile '/home/oracle/create/CSR/redo/redo1CSR.log' SIZE 500k,
'/home/oracle/create/CSR/redo/redo2CSR.log' SIZE 500k,
'/home/oracle/create/CSR/redo/redo3CSR.log' SIZE 500k;
Can someone tell me what is wrong, please?

I'm trying this, that isn't OK at allAre there any errors? can you explain what is not "OK"?

How to create new partition on a brand-new Satellite P50T-A0EE?

Hi,
I bought a Toshiba, Satellite P50T-A0EE SLV laptop yesterday with installed Win 8, in Adelaide. First, I realised that only one C:/ partition is available and no additional partition is created for data and for some reason, already 150 GB is used on the C:/ by the factory installed software.
Moreover, checking the disk management, it came up that four primary partitions exist.
One is the C:/, two others are called Healthy (Recovery Partition), and one is the Healthy (EFI System Partition).
As I read up about it, a fifth primary partition is questionable to create, maybe even not supported.
When I just started to launch on C:/ the 'shrink volume' command, much less space was offered to use than it was displayed as free under file manager.
Could someone help, please how to create a separate partition with a reasonable size (600 GB at least from the 1Tb) for data? I would not like to keep my data files on a same partition with windows.
Thanks,
Gerti

Hi dude,
Before you would start to modify the HDD partitions table, I recommend strongly to create an Toshiba Recovery Medium using the preinstall software/tool called Toshiba Recovery Media Creator.
This software creates either the recovery disks (DVDs) or Recovery USB flash memory.
Its very important to create such medium in case you would like to go back to the factory state.
After that you could use an open source software like Gparted tool to create the partitions and to modify the HDD partitions table.
http://gparted.org/liveusb.php
Note: the partitions which are already available on the HDD contain the Toshiba recovery image which allows you to recover the notebook from HDD. But this is possible only in case the HDD partitions table has not been modified in the past.

How to Create Multiple Partitions in Windows?

I have just carried out a clean install of Lion then used Boot Camp to install Windows.
With Snow Leopard I had the ability to create multiple partitions in Windows but this seems impossible in Lion for whatever reason.
Can anyone please tell me how to achieve this?

If you're using Boot Camp, I'd post your question on the Boot Camp section:
http://discussions.apple.com/category.jspa?categoryID=237

How to use RAW partition for Oracle for placing data?

Dear all,
I have installed Oracle on a SUN machine and use database mount point /oracle which is a UFS system.
But now I would like to use RAW partition instead of a UFS system to place Oracle database data...
The installation guide mentions that database mount points have to be prepared before installation, could I just use /dev/rdsk/c0t0d0s5 as database mount points after partitioning c0t0d0s5?
I am attempting to create a tablespace in the above partition... Could any experts tell me if the above works?
Thanks a lot!

kwan,
Raw partion is used to store Oracle data files and not Oracle software. Oracle home is going be in regular file system. More than one file can not share the same raw device.
You create the raw device at the OS level using the OS command. Then create tablespace on Oracle and use the clause DATAFILE 'Raw file Name'
Hope this helps
Best,
G

How to create a partition using Boot camp assistant 4.0.1 ?

Hi, i would like to "Partition" my drive and not "Install" windows 7 like the assistant asks me... I wanted to increase the size of my bootcamp partition. So i used winclone to save it and now to restore it i need a NTFS partition that is normally created with the bootcamp assistant. But with the latest (4.0.1) i have no choice to partition and report the installation for later. As it was before.... So can someone tell me how i can create that partition on my drive? Because when i choose the size and then click install, the assistant requires a disk that i don't have. Thx for your help.

So i called apple today and the outcome is that i cannot partition my disk with BCA 4.0.1. Not anymore. The only way to do it is to go back to Snow leopard, with BCA 3.0 to partition your disk. and then upgrade to lion once you made your partition with BCA 3.0. And another thing: you can only install Windows 7 not Vista or XP. with BCA 4.0.1 its the only one allowed. So for everyone out there trying to increase the size of your Bootcamp partition using Winclone, it's not possible with Lion anymore. I ended up bying a windows 7 copy at retail price.... and start over again..

How to create list partition Where value not equal

Hi ,
How to crate partition where i want to store all data what is not equal to ,priview values,(A,B,C,D,E) ?
PARTITION PN001 VALUES (*is all values !=A,B,C,D,E*) TABLESPACE test_1Thanks !
ID

>
In partition
<partition_name> values (default) ? will be stored data where value is null too ?
>
See the VLDB partitioning guide
http://docs.oracle.com/cd/E18283_01/server.112/e16541/part_admin001.htm#sthref247
>
Creating List-Partitioned Tables
The semantics for creating list partitions are very similar to those for creating range partitions. However, to create list partitions, you specify a PARTITION BY LIST clause in the CREATE TABLE statement, and the PARTITION clauses specify lists of literal values, which are the discrete values of the partitioning columns that qualify rows to be included in the partition. For list partitioning, the partitioning key can only be a single column name from the table.
Available only with list partitioning, you can use the keyword DEFAULT to describe the value list for a partition. This identifies a partition that accommodates rows that do not map into any of the other partitions.
>
Note the last two sentences above. The DEFAULT partition will contain data for values (including NULL) that do not map to other partitions.

How to create raw partition in a local zone?

Similar Messages

Maybe you are looking for