How to create resolution(High, medium, low) options?

I have no clue how to create resolution options for a partially finished game, so what do you guys suggest i do?

Constant
Defined By
BEST : String = "best"[static] Specifies very high rendering quality: graphics are anti-aliased using a 4 x 4 pixel grid and bitmaps are always smoothed.
StageQuality
HIGH : String = "high"[static] Specifies high rendering quality: graphics are anti-aliased using a 4 x 4 pixel grid, and bitmaps are smoothed if the movie is static.
StageQuality
LOW : String = "low"[static] Specifies low rendering quality: graphics are not anti-aliased, and bitmaps are not smoothed.
StageQuality
MEDIUM : String = "medium"[static] Specifies medium rendering quality: graphics are anti-aliased using a 2 x 2 pixel grid, but bitmaps are not smoothed.
StageQuality

Similar Messages

How much monthly data (high/medium/low) should I have when buying apple tv?

Looking for how much data I will need so I can make sure it's available without getting hitting the max before the months end, and how quickly it's being used.

If you intend to watch sports or premium content like HBO then you would next to have a cable subscription, most are not standalone services. You will not find any device that allows you to cut the cord in this scenario.
I assume you currently have cable and internet, so if your intention was to remove cable that itself would decease the bill. Not sure who the provider is but I currently have a 150GB allotment for a fee nowhere near what a cable subscription would cost.
OF course you you could lower the resolution, SD on netflix for example only used 700mb and the most basic would go as low as 300

Sort by 'High, Medium, Low'

I've been working on a bit of an organization chart and made a Priority columns containing the values High, Medium and Low. How do I make a custom sort order for -High to Low- and -Low to High-?

Or use:
! Low
!! Med
xxx High (Use ! for x. Forum doesn't like three exclamation points in a row, but Numbers can use them, and will sort as shown.)
Or use:
0 Low
1 Med
2 High
and sort ascending to get the order above for either set.
More than One Way Inc.
Cat-skinning a specialty.
Regards,
Barry

How to create an association in folder options panel in order to open an e mail

when trying to open attachment, it tells me that this file does not have a program associated with it to perform this action.
I have to create an association in folder options panel.
how do i do that?

See this: <br />
http://support.mozilla.com/en-US/kb/Managing+file+types

How to create new playlist. File option greyed out

The create playlist option is greyed out in the File menu. How do I create I new playlist? What is wrong with the new version?

Hi;
How to create new alertlog file. Does it require the DB bounce?Oracle will automatically create a new alert log file whenever the old one is deleted and you dont need to bounce db
For details see:
http://orafaq.com/wiki/Alert.log
Regard
Helios

How can I extract high and low parts of a string that represents a 64bits decimal number?

I want to extract the high and low parts to interpret it and convert to binary code, but such a hugh number (represented by a string) isn't easy to extract from the string directly its high and low parts.

LabVIEW can't handle a 64-bit integer. You will have to store it as two 32-bit integers. If you need exact math on those 64-bit intergers you will have to make up your own routines to handle the carries and what not. If you just need pretty good accuracy, covert both 32-bit integers to double, multiply the upper 32-bit number by 2*32 (also a double) and then add the lower 32-bit number to it.
Good luck.

How to create BP from existing vendors optionally?

Hi,
how can I create RE business partners from existing vendors for some optional vendors only?
Does the vendor synchronization (Cross-Application Components - Master Data Synchronization - Customer/Vendor Integration) mean that a BP is created for each vendor in the specific account group?
I've tried to define the configuration settings but haven't found the solution for this yet. Please advise.
- BP grouping assigned to number range
- one FI account group is assigned to BP grouping
- BP role (BP role category, BP view) defined
- in Vendor role link, is the assignment of Role category "optional"?
Thanks!

Hi,
thanks for your comment. I need to check this option too.
However, in this case this does not seem like the best option regarding the workload of users. If they have already xxx vendors in FICO, it does not seem like a very efficient way to create those first also as BP, and then link these records.
It would be much easier to only create the BP based on vendor data with FLBPC1, and save the double work.
Based on SAP documentation, I've understood that FLBPC1 Create BP from vendor is meant for this purpose, so I would like to use this option.
Please advise. Has anyone used FLBPC1 Create BP from vendor successfully?
Thanks!

How to create ods object with overwrite option

Hi all,
I have two ods objects for Billing and Delivery and one cube for Sales.
Billing and Delivery ODS objects are based on item level data source while sales cube is based on Schedule line level data source.
Now i want to create a new ODS object which will get the data from these there object and update the ods object.Basically i want all the sales order attributes and billing quantity and delivered quantity from the ODS objects.
how to update the new ods object in overwrite mode ??/
Regards,
Viren.

HI,
yes OK but what i mean is that (you might have a perfect reason for this) normally it's nota good idea to have an info cube as a data source (for Performance, look-up reasons etc). If your goal is to load Billing/Delivery/Sales data into one ODS, then make sure that you model this correct.
If you want to use the ODS'es as data sources I would recommend you to use and ODS as data source also for the Sales data.
Kind regards
/martin

How to Create a High Quality Band/Multitrack Recording Play-Through Video?

I am trying to work out the best way to make a playthrough video a little like these - http://www.youtube.com/watch?v=1QUUajNPb5g - http://www.youtube.com/watch?v=DAGqCAsk3gQ&feature=related .
It would be for doing a multitrack-recording playthrough video of my drummer, played to the backing track of one of our songs I recorded in cubase 6
I have Adobe Premiere CS6, Cubase 6, the aproprate mics, a soundcard etc, but I don't have a video camera, but I'd probably just get a £300-£500 one unless you guys think that's not right?
So I'm wondering how you might go about this?
Cheers!!!

Hi
This is due to iMovie and really iMovie'08 or 09
They are aimed for quick editing to web-publishing - not high quality DVD.
iMovie 1 to HD 6 and FinalCut Express or Pro are the tool of choise for DVD or
even Blue-Ray (needs Roxio Toast™ and ev. a Blue-Ray burner/disks)
iMovie'08 and 09 discard every second line = less quality very close to VHS.
I never managed to get full quality from them to feed iDVD.
• Pro Quality encoding in iDVD is very sufficient to my needs and
burning out with Roxio Toast™ as Blue-Ray to standard DVD (max 20-30 minutes)
gives an even better result BUT ONLY PLAYBACK on Blue-Ray player or PlayStation 3.
Yours Bengt W

How to create apple id without payment option or using debit card

can any one help me to solve this problem dat i want to register my aplle id without payment otion or using with debit card option bcoz i have tried a lot bt its nt accepting

There are instructions on this page for creating a new account (the instructions won't work with existing accounts) without giving credit card details (I don't think that debit cards are still accepted) : http://support.apple.com/kb/HT2534
e.g. if doing it on a computer's iTunes, then if currently logged into an account then log out of it, find a free app in the store and click on its free 'price' :
Click on 'create Apple id' on the popup :
You should then be able to enter details of your new account and get 'none' as a payment option - I tried it a few days ago in response to another thread and got 'none' on the payments screen, and was able to click on the verification email and download a free app with it

How can I get high and low value of a histogram?

Is it possible the get the luminance value of brightest pixel and darkest pixel in an image using aescript?

Hi,
this is the code i used.
The size of the sample is determined by input parameters 'numCols' and 'numRows', which is the simplest way to do it.
Specifiying instead the radius or size of the sample would require more code to make sure that the layer is scanned entirely...
Lots of comments, can be shortened a lot.
Xavier.
function getLuminanceData(layer, postEffect, time, numCols, numRows){
    // layer: layer object (inside a ae comp)
    // postEffect: if true, the layer's effect are taken into account, else ... not.
    // time : the time at which the histogram is determined
    // numCols, numRows: integers >=1    ( how many rows and columns to determine samples size)
    //        if not specified, numCols defaults to 10
    //        if not specified, numRows defaults to Math.round(numCols*layer.height/layer.width)
    //        if the samples size turns out to be too small (<1) those numbers are redefined so that the sample size is 1 (===> V-E-R-Y S-L-O-W)
    // returns an object:
    // numCols, numRows: the actual number of rows and columns used (the number of samples is numCols * numRows)
    // radius: the corresponding sampling radius
    // hist: Array(101). hist[L] : how many samples have luminance L (L: integer in 0-100)
    // minValue: the smallest L for which there is a sample with luminance L
    // minCoord: all samples coordinates with minimum luminance (arranged into an array - the coordinates are those of the center of the sample)
    // maxValue, maxCoord : same for max
    postEffect = !!postEffect;
    if (typeof time !== 'number' || isNaN(time)) time = layer.time;
    numCols = numCols>=1 ? Math.round(numCols) : 10;
    numRows = numRows>=1 ? Math.round(numRows) : Math.round(numCols*layer.height/layer.width) || 1;
    var
            bpc = app.project.bitsPerChannel,
            w, W = layer.width,
            h, H=layer.height,
            size_x = W/numCols,
            size_y = H/numRows,
            numSamples,
            radius,
            L, lumHist = new Array(101),
            minValue, maxValue, minCoord=[], maxCoord=[],
            color,
            exprStart, exprEnd,
            doUndoGroup;
    // check that numCols and numRows are not too big:
    if (size_x<1){size_x=1; numCols = W;};
    if (size_y<1){size_y=1; numRows = H;};
    numSamples = numCols*numRows;
    // ~ 1 second and more (for 1 image, 1 frame) is considered s-l-o-w
    //if (numSamples>=4000 && !confirm("This will be s-l-o-w. Continue ?")) return;
    // expression :
    radius = [0.5*size_x, 0.5*size_y];    // radius is half the size of the sample
    exprStart = "rgbToHsl(sampleImage(";
    exprEnd = ", "+ radius.toSource()+ ", "+postEffect.toString()+", "+time.toString()+"));";
    // initialise lumHist to an array of zeros:
    for (L=0; L<101; L++) lumHist[L] = 0; // luminance from 0 to 100
    // if the number of samples is small enough, putting the action sequence inside an undoGroup fasten things up a bit, and allows to preserve undos history
    // if the number of samples is huge, an undoGroup will actually slow things down (apparently)
    doUndoGroup = numSamples <= 1e5;
    if (doUndoGroup) app.beginUndoGroup("Get Luminance Histogram");
    // if necessary, go to 16 bpc
    if (bpc<16) app.project.bitsPerChannel = 16;
    // add a temporary color control
    color = layer.effect.addProperty("ADBE Color Control").color;    // the color property of the color control
    for (w=radius[0]; w<W; w+=size_x){
        for (h=radius[1]; h<H; h+=size_y){
            color.expression = exprStart + [w,h].toSource() + exprEnd;    // ie : rgbToHsl(sampleImage([w,h], radius, postEffect, time));
            // if (color.value[3]<0.1) continue;
            L = Math.round(100*color.value[2]);
            ++lumHist[L];
            if (minValue<0){
                // very first sample only
                minValue=maxValue=L;
                minCoord = [[w,h]];
                maxCoord = [[w,h]];
            else{
                if (L<=minValue){
                    if (L===minValue){if (minCoord.length<1000) minCoord.push([w,h]);}    // only keep first 1000 points with smallest luminance otherwise the minCoord array can grow too big (eg red solid, 1920*1080, radius = [0.5, 0.5], ===> 2,000,000 entries..)
                    else{minValue=L; minCoord = [[w,h]];};
                if (maxValue<=L){
                    if (maxValue===L){if (maxCoord.length<1000) maxCoord.push([w,h]);}    // same
                    else{maxValue=L; maxCoord=[[w,h]];};
    color.parentProperty.remove();
    if (bpc<16) app.project.bitsPerChannel = bpc;
    if (doUndoGroup) app.endUndoGroup();
    //if (maxValue === minValue){};
    return {numRows: numRows, numCols: numCols, radius: radius, hist: lumHist, minValue: minValue, maxValue: maxValue, minCoord: minCoord, maxCoord: maxCoord};
$.hiresTimer;
var luminanceData= getLuminanceData(app.project.activeItem.layer(1), false, void(0), 100);
"Ellapsed time : "+ $.hiresTimer/1e6;

How to create an install medium of Windows 8 with custom programs (like an OEM install)

Hello all,
I am interested in setting up a small business of making PCs for people around my area, and was curious if there was any way I could install Windows 8.1 on those computers with custom programs (i.e. Browsers, Anti-virus, etc.), but not have to create a user
account to do so? I want people to get these computers and go through the regular setup account process when they turn them on for the first time, just like with any computer from a regular OEM. Basically, I am trying to create my own OEM instillations of
Windows.
Thanks for any help, and let me know if I need to clarify anything.
Graham

Hi,
Andreas is right, we have many ways to deploy Windows 8.1 like OEM.
You can also try the ADK:
Windows Assessment and Deployment Kit (Windows ADK) for Windows 8.1
http://www.microsoft.com/en-hk/download/details.aspx?id=39982
The Windows ADK enables two key scenarios: Windows deployment and Windows assessment.
Windows Deployment is for OEMs and IT professionals who customize and automate the large-scale installation of Windows on a factory floor or across an organization.
Kate Li
TechNet Community Support

How can I change my Camera resolution from very high to lower for email use.

How can I change my Iphone 4-8gb Camera resolution from very high to lower for emailing? it is now 26-- x 19-- approx..

Are both of your Apple routers configured for an extended or roaming network?

How do I create a High Quality Image with a low file size???

Dear All,
I am creating an invitation in Illustrator which I then place into photshop to create a JPEG. I want to create a high quality JPEG version of it but with a low file size because I am emailing the invitation. Am I correct in placing the image into photshop or should I export it from Illustrator.
The image is built of of vectors and one JPEG but they are not high in quality.
Can anyone help me please
Thanks
Ben

The image is built of of vectors and one JPEG but they are not high in quality.
For this type of image you would probably be better choosing GIF format (now known for some reason as 'Compuserve GIF'). Taking the number of "colors' down untl it still looks high quality, and anti-aliasing is preserved.

How to creat select-option on module pool screen???

Hi All,
please tell me how to creat select-option on module pool screen???
Regards
Deepak

Hi Deepak Kumar Sharma,
There are Two ways to achieve it...
1) How to create a select-options in a module pool screen.
Method 1
a) Create a subscreen area in your screen layout where you want to create the select options.
b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
select-options s_matnr for mara-matnr.
SELECTION-SCREEN END OF SCREEN.
c) In the PBO and PAI of the main screen where the select options needs to be created do a call subscreen of the above screen (100).
CALL SUBCREEN sub_area INCLUDING <program> <screen>
This call subscreen statement is necessary for transport of values between screen and program.
Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen validations etc should be done in the top include only.
Method 2
a) Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
struc_tab_and_field-fieldname = con_cust. " 'KUNNR'
struc_tab_and_field-tablename = con_kna1. " 'KNA1'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
TITLE = ' '
text = g_titl1 " 'Customers'
tab_and_field = struc_tab_and_field
TABLES
RANGE = rng_kunnr
EXCEPTIONS
NO_RANGE_TAB = 1
CANCELLED = 2
INTERNAL_ERROR = 3
INVALID_FIELDNAME = 4
OTHERS = 5.
IF NOT rng_kunnr[] IS INITIAL.
Read the very first entry of the range table and pass it to
dynpro screen field
READ TABLE rng_kunnr INDEX 1.
IF sy-subrc = 0.
g_cust = rng_kunnr-low.
ENDIF.
You can use the return table rng_kunnr to populate your own internal range table with the values entered by the user. Basically here you are just simulating the work of a select-options parameter by module pool screen elements.
Also have a look on below threads
how to make select option in module pool
select option in module pool program
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

How to create resolution(High, medium, low) options?

Similar Messages

Maybe you are looking for