How to create RPC encoded wsdl for the bpel project created in jdeveloper?

Hi,
I have to create a bpel project in jdeveloper with the wsdl of the project in rpc encoded format. By default when we create a bpel project in jdeveloper it creates a wsdl file of document literal format, but i need the wsdl to be rpc encoded format. Please let me know how can i achieve this.
Thanks.

Hi Nico,
Thanks for your reply.
You mentioned to specify type in place of element, from where do you get this type and what more changes we need to do for the entire project to compile well with out errors.
As suggested by you, I changed the element to type and tried to compile, it is giving the below error.
Error:
[Error ORABPEL-10902]: compilation failed
[Description]: in "bpel.xml", XML parsing failed because "undefined part type.
In WSDL at "file:/D:/indu/jdevstudio10134/jdev/mywork/TimerApplication/SelectDB/bpel/SelectDB.wsdl", message part type "SelectDBProcessRequestType" is not defined in any of the schemas.
Please make sure the spelling of the type QName is correct and the WSDL import is complete.
[Potential fix]: n/a.
Please let me know what are all the changes that need to be done to complie the project successfully.
Thanks and Regards.

Similar Messages

How to create a .jar file for the BPEL project

hi all,
how can i create a .jar file for my BPEL project, i am trying to deploy the project but getting an error :
"Error: [Error ORABPEL-10902]: compilation failed [Description]: in "C:\OraBPELPM\integration\jdev\jdev\mywork\Workspace_BPELDemo\BPEL_Report\BPEL_Report.bpel", XML parsing failed because "". [Potential fix]: n/a. "
and when doubel cliking on this error Jdev take me to the beginning of the ".bpel" file.
I 'm really stuck in here i am not able to deploy the process!
Thanks,
Rana

Rana:
If you haven't already, I would post this question in the BPEL forum. I would expect a much better turnaround there.
Johnny Lee

How to read/use RPC/Encoded WSDL in BPEL

Hi All,
We are developing a new application using Oracle BPEL and interface with an existing application.
The existing application (in mainframes) sends us the wsdl in rpc/encoded format.
How to read thie wsdl into BPEL? What we found so far is that we can use document/literal wsdl only.
Is there a way to read rpc/encoded wsdl in bpel?
Or a way to convert rpc/encoded wsdl into doucment/literal format wsdl so that it can be used in bpel?
Or any java code in between which can do this transformation?
Please help.
Thanks
Shiva

Steve,
You need to do the following in order to get file and folder names from File/FTP adapter.
1. fileAdapterInboundHeader.wsdl, FTPAdapterInboundHeader.wsdl files does have header structure for file and FTP adapter respectively. These files have the following Header definition:
<types>
<schema attributeFormDefault="qualified" elementFormDefault="qualified"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/file/"
xmlns="http://www.w3.org/2001/XMLSchema"
xmlns:FILEAPP="http://xmlns.oracle.com/pcbpel/adapter/file/">
<element name="InboundFileHeaderType">
<complexType>
<sequence>
<element name="fileName" type="string"/>
<element name="directory" type="string"/>
</sequence>
</complexType>
</element>
</schema>
</types>

<message name="InboundHeader_msg">
<part element="tns:InboundFileHeaderType" name="inboundHeader"/>
</message>
2. You need to create a variable of message type InboundHeader_msg.
 2.a. Open variable creation dialog box. Choose Message Type as type and open the Type Chooser.
 2.b. Expend Message Type and then expend Project WSDL Files.
 2.c. You will see fileAdapterInboundHeader.wsdl/ftpAdapterInboundHeader.wsdl there.
 2.d. Expend the wsdl file and select message type InboundHeader_msg.
3. Now you have your header variable, double click on Receive activity and go to Adapter tab.
4. Select header variable you have created using above steps as Header Variable.
5. Add an assign activity to get fileName and directory from the header variable you have created.
6. Your header variable will be populated while adapter reads the file.
Regards,
Dharmendra
http://soa-howto.blogspot.com

Getting complete WSDL for the web services created in J2EE

Hi,
I have created a web service using Netweaver developer studio for a J2EE project (complete EJB, WEB and Appln Project) similar to CAR rental application.
I also have tested the web service in web service perspective and it is working fine. Now i want to call this web service from XI. Therefore i need the WSDL for the same. The testing screen also gives the WSDL for the web service. But it has got number of links inside in the forms of import.
Editing all those documents and forming the complete wSDL is very difficult..
How do i do it??
Abhijeet

Hi,
When I opened the wsdl it has number has a wsdl:import location tag..which refers to binding.
when opened this import location we have one more import location for porttypes.
When combined all thhree e.g. service, binding and porttype we get the complete WSDL which i could comofortably import in XI and further process.
This way i coudl succesfully call a web service from XI.
I used Stylus studio for editing WSDL.
Thanx

When we use XML,XSD,WSDL files to create SOA webservices in jdeveloper ,what will happen means internally,how will useful xml ,xsd,wsdl for composite ?

When we use XML,XSD,WSDL files to create SOA webservices in jdeveloper ,what will happen means internally,how will useful xml ,xsd,wsdl for composite ?
How xml will send message to XSD then how wsdl interaction then to composite ?

XSD (XML Schema Definition), is an abstract representation of a XML characteristics.
The WSDL (Web Services Description Language), describes the functionality offered by your web service.
You can say what operations your services offers, and describe the messages used for this operations in your XSD.

Has anyone had to create a WSDL for the UCCX API integration?

We are struggling with creating a WSDL for the UCCX API for integration with an external webservice, as the UCCX isn't a true webservice. Has anyone created a WSDL for this type of integration? Thanks!

Thank you Gergely! I don't think I worded this very well. We have an http trigger that accepts several parameters from the client (see screenshot for example). The http trigger works with several other scripts and uses the UCCX API to manage an outbound IVR campaign.
They are asking us for a WSDL for this interaction. We explained that this is not a true webservice; it is a simple POST but we wanted to put it out to the community to see if anyone had any insight/ideas. Thank you again for always taking the time to respond!

Problem with RPC/encoded WSDL

I'm having trouble calling a web service that is based on an RPC-encoded WSDL. I've already made slight changes to the WSDL, so that I get a work-able message type for mapping purposes. These changes are based on <a href="http://www.ws-i.org/Profiles/BasicProfile-1.0-2004-04-16.html#refinement16556272">soapenc:Array recommendations in WSDL 1.1 Section 2.2</a> for declaration of array types.
Here's a snippet of the WSDL:
<wsdl:definitions ...>
<wsdl:types>
 <schema ...>
 <complexType name="ArrayOf_tns1_ServiceOption">
 <complexContent>
 <restriction base="soapenc:Array">
 <attribute ref="soapenc:arrayType"
 wsdl:arrayType="tns1:ServiceOption[]"
 xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"/>
 </restriction>
 </complexContent>
 </complexType>
 </schema>
 <schema ...>
 <complexType name="ServiceOption">
 <sequence>
 <element name="key" nillable="true"
 type="xsd:string"/>
 <element name="value" nillable="true"
 type="xsd:string"/>
 </sequence>
 </complexType>
 </schema>
</wsdl:types>
</wsdl:definitions>
I've changed it to:
<wsdl:definitions ...>
<wsdl:types>
 <schema ...>
 <complexType name="ArrayOf_tns1_ServiceOption">
 <sequence>
 <element name="ServiceOption"
 type="tns1:ServiceOption"
 minOccurs="0" maxOccurs="unbounded"/>
 </sequence>
 </complexType>
 </schema>
 </schema>
 <schema ...>
 <complexType name="ServiceOption">
 <sequence>
 <element name="key" nillable="true"
 type="xsd:string"/>
 <element name="value" nillable="true"
 type="xsd:string"/>
 </sequence>
 </complexType>
 </schema>
</wsdl:types>
</wsdl:definitions>
The above changes have allowed me to make message mappings. But the I still get an error when sending a request to the web service. It seems that it requires the xsi:type and soapenc:arrayType attributes for arrays.
How can I create these attributes? How does XI handle RPC-encoded WSDLs? I haven't encountered these problems with document-literal WSDLs.
Thanks in advance.

Hi Lorenzo,
the extended support of rpc-style does not include the support of soapenc:array. It just addresses the root of the message and its direct children (as discussed in the thread where I added this hint).
In the documentation of External Definitions you can find a hint where to find a list of supported XSD/DTD/WSDL-features. However, also there you will find no hint on the fact that soapenc:array is not supported. The reason for this is, that soapenc:array is specified in none of these standards. It is some artifact that SOAP smuggled into XSD. For good reasons WS-I prohibits the use of this artifact.
Hence, if you need support for argumentation I can only point out the WS-I document I already linked.
Greetings
Stephan

Can SAP handle RPC/encoded WSDLs

I am not sure whether this is the right forum for this question, but i'll give it a try:
I have a WSDL file (web service decription) from a 3rd party tool, which is RPC/encoded, and I tried to generated an ABAP proxy class (SAP Basis 7.01). During the generation I get a couple of different errors, and the one that bothers me most is
"incorrect value for attribute use: "encoded"".
When I replace all occurrences of "use="encoded"" with "use="literal"", then the proxy generation will work, but in this case, the web service call will not work anymore (probably because the encoded response from the webservice cannot be read by the proxy class).
What can I do?
Any hints are welcome.

Hi,
It seems only RPC with literal will be supported in future.
Quote from wiki Please see this:
"Some of these combinations are rarely used in practice, such as document/encoded. In general, the literal use is gaining importance, and as far as RPC/encoded is concerned, the Web Services Interoperability Organization (WS-I) in its Basic Profile Version 1.0a of August 2003 ruled out the use of SOAP encoding with web services. Document/literal and RPC/literal will be the only allowed style/use combinations in the future."
Detail wiki is available here: http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c018da90-0201-0010-ed85-d714ff7b7019
Regards,
Gourav
Edited by: Gourav Khare on Oct 13, 2009 12:28 AM

BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?

Hi All.
I have this request.
BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?
We have jobs scheduled on BODS running smoothly and absolutely fine.
But to check, i am logging into the admin console and check for the jobs status.
I would like to have an email to be received from BODS after each job is finished.
It could succuessful. Or it could fail.
Whatsoever, i wish to receive an email alert as soon as a job is finished.
Can anyone advise me as to whether this could be made possible.
And if yes, how this could be done.
Thanks for your help in advance.
In BOE CMC / for webi / schedule / we find an option to send email for a job success or a job failure.
Is there any option similar to that in BODS ?
Also would like to know :
how to use the smtp_to or mail_to functions ?
how to set up the smtp server for this ?
thanks
REgards
indu
Edited by: Indumathy Narayanan on May 31, 2011 3:47 PM

Hi.
Since am new to this BODS. I need some help.
I already have many jobs which are running absolutely fine.
And when a job runs, and finishes, am able to see the trace saying
e.g. :
Job_abc is completed successfully.
We got the smtp service activated for our test server.
and we hae a group email id.
I have put the details of the smtp server / ip address / and said apply restarted.
The i created a simple test script as below :
print (' Before email ' );
smtp_to('abc@company_name.com', 'Job ' || job_name() ||' on ' || host_name() || ' has FAILED',
' the job has failed', 0, 0);
print('After Email ');
It does send a email to as per smtp_to whatever email is specified.
But how to differentiate between a job success
And a job which has failed.
I wish to have a mail which says on the subject :
'Job ' || job_name() ||' on ' || host_name() || ' has completed successfully'
==> IF it is a success
OR
'Job ' || job_name() ||' on ' || host_name() || ' has failed'
==> if it has failed
How to make the system identify, whether
to send a success message or a error message whatever
Could anyone advise.
thanks
indu

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

Create a defaut view for the MS Project Server 2010 client

Dear Forum,
how can I create a defaut view for the MS Project Server 2010 client?
I saved a template and set a default view under File -> Options ->Project View. I also did the same in the checked-out enterprise global. If I then close the client and re-open it my default view changes back again to the previous one (not the view
I set as a default view).
What explains this behaviour and what can I do? Any hints?
Thank you very much for your help!

Scheduler007 --
The view you selected by clicking File > Options > Project View is the default view for every new project you create from a blank project template. This is a global option, so setting it from the checked out Enterprise Global file serves no purpose.
When you select a view as your default view, you will see that view applied to the blank project that is opened when you launch Microsoft Project 2010, and you will see it applied if you create new blank projects. If you create enterprise templates for
people to use in your organization, you should simply apply the view to the template that you want as the default so that users will see this view immediately when they create a new project from the template. In addition, if you apply a view to an open
project, close and check in the project, and then reopen the project, you will see the last view applied in that project (as Guillaume correctly points out).
Beyond this, there is no method possible for the Project Server administrator to specify a default view for the Microsoft Project application used by the project managers in your organization. This is an option each PM must set. Hope this helps.
Dale A. Howard [MVP]

How to enter a specific vendor for the delivery costs in purchasing order?

Now I want to create a purchasing order including planned deliver costs such as Freight, Coustoms ect, as the vendor of such planned deliver costs is different from the goods supplier, then How to enter a specific vendor for the delivery costs in purchasing order? That means the partner for invoice partner will be two vendors at least in one purchasing order. thanks very much.

No one would like to answer this question?
Message was edited by:
King Qi

hi,
You can have vendor at each condition record level.
try it out.
cheers
Rav

How to restrict production order creation for the WBS

Dear Gurus,
Our client is is using PS & PP. So that as per current procedure material required for the particular project will be uploaded into the CJ20N i.e. it will be assigned to the network.
So that on that basis production orders will be created with the transaction co10. But in this case there is no linking between the orders created & quantity required in the project.
So is there any restriction that by using co10 we will be able to create the production order for the material which is enterd in to the wbs with not exceeding the quantity also.
With Regards...
Abhay

Dear Abhi,
But why do you require to create produciton order manually through co10?
Any how you must running MRP in MD51 where in you will get your planned orders which you can convert to production orders!
Thanks.

When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
For example, here's the log entry for McAfee:
9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
After I made the change, iTunes installed without complaint.

How to add a document type for the residence status GB in infotype 48

Hi Team,
How to add a document type for the residence status GB in infotype 48.
Please answer this at the earliest.PFA screnshot.
Thanks
chris

I believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
When a relationship is created you may watch it also from either end (again INFO is the starting point).
It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it.

How to create RPC encoded wsdl for the bpel project created in jdeveloper?

Similar Messages

Maybe you are looking for