How to create stacked bar and standard bar on same graph

Can OBIEE can both Stacked and Standard bar graph on the same analysis by using Line-Bar graph type? For example, I have four measure: Target revenue, Revenue, Billed Quantity, and Target Quantity. I would like to create an analysis that includes all these four measure. On the same graph, I would like to use Stacked subtype for Target revenue and Revenue, use standard subtype for Billed quantity and use line for Target quantity. I tried, but could not find any way to put stacked subtype and standard subtype on the same graph. Do you know if this feature is available from OBIEE?

I tried to do this and was a bit successful. I used the paint catalog. Created a a request with 6 columns assuming units and dollars be stacked and Year ago units to be a line:
Brand Units Dollars 0 Year_Ago_units 1
Added a new request (Combined with similar request and selected paint subject area): Now in this request my columns are:
Brand 0 0 Year_Ago_Dollars Year_Ago_units 2
Assuming Year_Ago_Dollars be standard in your case.
Created a chart view with brand and 1 on x axis and Units, Dollars, Year_Ago_Dollars on y axis and line as Year_Ago_units.
Now able to see what I am expecting. May be you need to tweak a bit more according to your requirement.
Let me know if this is of any help!
Thanks.
Edited by: Venkata on Sep 30, 2010 12:11 PM

Similar Messages

How do I view the Horizontal Scrolling bar and status bar at the bottom of the screen. I can only see the top menus, toolbars and vertical scroll bar?

Before the most recent upgrade, the bottom horizontal scrolling bar and status bar appeared on my screen. Now since upgrading, I cannot see the. Anyone ideas how to restore them?

If you haven't already, you could force-quit Quicktime by using the menu option from the desktop (finder) and choose Quicktime.
Not sure what you have frozen on the screen, be it a failed movie, or some unusual screen shot. If you can find by date (created) you may be able to look for .mov or quicktime suffix name or other video file content to delete it.
And you may have to restart your computer and perhaps run repair disk permissions from Disk Utility's first aid on the hard disk drive in your computer.
Not sure if all that would help now, but it is something a few days late...!
Good luck & happy computing!

How to create a double Y axis bar chart

I have a table with 3 columns, how to create a double Y axis bar chart with title and scale of one Y axis on one side and the other title on the other side, left and right side of the chart.
Dec 13 107.9
Jan 9 106.5
Feb 11 96.1
Mar 15 111.5
Apr 13 106.3
May 13 101.1
Jun 14 100.2
July 18 100.8
Aug 15 103.4
Sep 16 108.8
Thanks a lot!
Stanley Tam

Start with chart that looks like a column + line chart with a left & right Y axis. It should be the one on the bottom left. After plotting your two series, go to the chart inspector, series tab, and change the second series from line to column. Go to the Axis tab and choose to show the titles for the Y1 and Y2 axes.

Browser bar and the bar above it disappeared, how do I get it back

I have Safari on my PC and the browser bar and the bar that has the files, edit, etc on it disappeared, how do I get it back? I was allowing my 2 year old daughter watch a show on netflix using google chrome but somehow she managed to get safari open and net thing I knew the browser bar is missing and when I tried to get it back, I managed to make things worse by making the bar above it disappear too. How do I get them back?

The OP is using or trying to use OS X on a non-Apple netbook or I've misunderstood.
What on earth makes you think that? He's posted in the Windows category of the Safari community. He has never mentioned Mac OS. He said Safari was installed on his PC in his very first post. Furthermore, the details of his replies to your advice are precisely what you should expect if he was using Safari for Windows, and trying to implement the (inapplicable and unimplementable) Safari for Mac advice in the context of his particular issue. You've got this one very badly wrong from the beginning right through to now, and in that context the implication that he was trying to get advice here on how to do something illegal was not only wrong, but insulting.

How to merge title bar and tab bar on Gnome desktop?

Not exactly a Firefox issue, but if it works fine on Windows it should work on Gnome too...
How can I merge title bar and tabs bar?
In Windows if we hide the menu bar Firefox puts in a single line Firefox button, tabs and minimize, maximize and close buttons. But in Gnome it keeps the separated title bar (with the minimize, maximize and close buttons).
Is there any way to really implement it on Gnome Desktop?

I want to back up what was said here. Chrome and Chromium have done this for as long as I can remember and the Linux distribution is entirely irrelevant in this case (as in most cases). There is an option to use the "system title bar and borders" in Chrome. If applied Chrome will have that blocky, chunky effect of not having the tabs overlapping into the title bar that firefox has. By default chrome does not use the system-provided title bar and borders. They wrote their own. The result is it looks nice. I prefer firefox by miles over Chrome, but have to admit it is chunky and ugly around the edges by comparison.
The problem is not that it is "not possible in Linux." As a dedicated Linux user, hearing that oft-repeated phrase gets really old. There is nothing about Linux that makes things not possible when it comes to coding features. What is going on is the shortcuts available to make the coding quick and easy may not already exist. Fewer people use Linux, fewer people develop for Linux, and there is often less existing code base already written for Linux to make a coding job quick and easy. Also, there is less incentive to write original code to make something work for Linux because we are relatively few; the countless minions using Windows are all complaining about other things and much more loudly so.
There is no doubt the task could be accomplished--which I would love to see--but the developers have to prioritize. I get that. Just wish they'd be honest rather than use the lazy answer of "It can't be done on your system."

How can I combine the nav bar and menu bar on the same line to save space?

Firefox v29 seems to be a huge step backward in customization. I need to save space for content so previously I turned off tabs and combined the menu bar and nav bar on the same line. The url space is way too long anyway. Now with v29 all my customization is gone and I cannot get it back. I can no longer move items on the nav bar to combine it with the menu bar. Why was this done? It only limits my ability to customize my browser? I am very frustrated that you took a great browser and ruined it.

I get it that Firefox has changed, but the change is for the worse. It makes it impossible to customize menus as I had before v.29.

How do I put my menu bar and address bar back at the top?

I closed my menu bar and address bar, etc. Now I can get them back I even tried reinstalling Firefox and that didn't work. Opposite clicking the top of the page doesn't work, either. HELP!
== This happened ==
Just once or twice
== When I temporarily turned off my bars.

Hit the '''Alt''' key to show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark.

How to create Maintaince View and Help View

Hi,
Can u pls tell me the step by step procedure for how to
create Maintaince View and Help View.
And what's the use of these view's.
Regards,
Kumar

FOR MAINTANENCE VIEW
Create a table or a view in transaction SE11.
A function group in SE80 transaction
1>go to se54 transaction.
2>give the name of the table /view starting from z.
3>select "Generated Objects" radio button.
4>click on "create/change" push button.
5>you get a pop asking you whether to create modules ,click on YES
6>give "authorization group" as temp.
7>give the function group name created by you.
8>click on "find Scr numbers "push button on the application tool bar.
9>in the pop up that you get select the 1st option and press enter
10>click on the create push button (it is beside "Find Scr numbers" push button)
11>selct local object and pres enter.
12>go to SM30 transaction.
13>give the table/view name
14>click on "maitain" push button.

How to create a drag and drop video playlist Help please

I would like to learn how to create a drag and drop video playlist.
I think the most common example is youtube.
I already have partial of the work but I am stuck with my preliminary knowledge of Flash.
What I am saying is:
I have a *.fla project that have the galleries for video and pictures.
But this process is done from the back end.
I would like to make it more dynamic for the visitors.
For example:
1. Create a visitor video (pictures) playlist
2. Drag and drop into the playlist
3. To be able to create different playlists (Playlist 1, "My favorite playlist", "Watch later", etc)
If someone knows or want to guide me where or how to find this request, I'd appreciate it so much.
If the forum think that this need to be address to a expertise ($). I am also welling to hear that and where to go.
If someone is interesting in this project please send me a note to show the prelimary project.
Thanks

Yeah that is the general idea but that is more of a "lift and drop", i want to add the same thing as when you:
Right click this window in the taskbar (assuming your using windows) when the window is not maximized and click "move" then it changes the cursor icon and allows u to move the window around and while you move it around it shows the window moving, not a click and release feature.
So i want that ability without having to click on the title bar, if you know what i mean.

How to create F4 for the standard transaction

Hi all ,
How to create F4 for the standard transaction for a particular field .
Bye

Santosh,
You can create F4 values for a field in a standard Transaction .
1. First search for a standard search help meeting your requirement .
2. If you don't find one, create your own custom (z) serach help .
( 1 is preferable )
After that, include that serch help to the standard field in the transaction .
For this u need to go to the screen
( F1->F9-> screen-> Field )
Click on the property of the field and include the search help .
You ll require the access key from the basisi guys as u r changing standard .
Hope it helps,
~ laxmi
Reward for helpful answers

The font in Safari's bookmarks bar and tabs bar has suddenly changed

The font in Safari's bookmarks bar and tabs bar has suddenly changed to a lighter font. How do I change the font back? I'm not speaking of the font size/type in the web browser in viewing web pages, but the font in the application itself has changed. It's rather annoying and would like to be able to change it back! I'm running Safari v5.1.7

OK, Margie, here's what to do . . .
First Quit Safari.
Then Find your User's (Home) folder library.
It's hidden, but here's how you find the Home Library:
Click on the desktop to get the Finder menu. Then go up to "Go" in the menu bar, while holding down the option key.
You'll now see the User Library in the drop down list. Open it, then look for the Fonts folder.
Take the fonts folder to the desktop.
Restart Safari.
Any better?
(Warning: This is only for the Users/Home > Library > Fonts folder. Under no circumstances, should this be done with the SYSTEM > Library > Fonts folder.)

Scroll bar and tab bar turn to images, images on a page repeat themselves

I don't know exactly how to explain my problem so I'll just give some examples.
- On youtube, video thumbnails copy themselves on top of the other video thumbnails, and sometimes I can see 2 or 3 same thumbnail, but when I hover the cursor above them they return to normal. The names or video links are unaffected, just the thumbnail.
- On facebook and some other forums, same problem exists. One thing I noticed, it doesn't affect huge files, as in it doesn't replace huge images but copies something like 200x200 image to some other place.
- Some of the tabs in tab bar and scroll bar sometimes turn into diagonal patterns, and scroll bar sometimes has the same problem I gave as example above. The grey default layer turns into an image. But hovering the cursor above it returns it to normal again.
Any help is appreciated.

Hi, thanks a lot for the support. I've found the solution!
I've checked all of the installed programs on my system. All programs are from verified publishers.
Actual problem was with graphic drivers. My laptop is Sony Vaio and therefore I had the recommended latest drivers (for my graphic card) available from Sony website installed. The graphic card is from NVIDIA GeForce. So, don't know why but I uninstalled all graphic drivers from the system and downloaded the latest drivers available for my graphic card hardware from NVIDIA website. Now the new latest drivers from NVIDIA solved the problem !!! Firefox is working perfect. No problem on any website.
May be the same can work for other Firefox users also having this problem. No need to disable "hardware acceleration when available" in Firefox.
Happy !!!! :D :D

How we create custom infotype and how to configure with its subtypes.

hai abap-hr gurus,
how to create custom infotype and how to configure with its subtypes. when i am creating infotypes i am not getting how to configure subtypes.
plz help me for this with an example code.
thanks..
kiran kumar

Hi Kiran,
Please fallow the below steps to create the custom infotype. If you have any quires let me know.
For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
then select the `Employee Infotype' radio button
after that select the `PS Structure Infotype'
then click on Create A separate table maintenance window appears
then Create a PS structure with all the fields you want on the infotype
Save and Activate the PS structure
now Go back to the initial screen of PM01
Click on `All' push button. It takes a few moments
Click on `Technical Characteristics. Infotype list screen appears
Click on `Change'(pencil) button
Now select your Infotype and click on `Detail' (magnifying glass) button
Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
Give your subtype field as subtype field & Save and come back to PM01 initial screen
Click on `Infotype Characteristics' Infotype list screen appears
Click on `Change' (pencil) button & on New Entries
and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
to fill yours). Now save ur entries
Now the Infotype is created and ready to use.
If you want to change the layout of the Infotype as per your
requirement
In the PM01 initial screenSelect `Screen' radio button and give
2000 as the screen name, then click on edit.
In the next screen.. Select `Layout Editor' and click `Change'.
Screen default layout appearshere you can design/modify the
screen..change the attributes of the fields..etc.
Save and activate. (Don't forget to `Activate at every level)
Regards,
Ramakrishna kotha.

How to create stacked canvas

How to create stacked canvas on a content canvas in forms builder.
Please let me know if anybody has some steps or screenshots.

once you build a content canvass your next step is to create another canvass with a property canvas type of stacked. those two canvas the content and stacked should have the same property of raise on entry yes and should be on the sane window.
to force to display the stacked canvass at runtime on your Form level trigger WHEN-NEW-FORM-INSTANCE add this code
show_view('stacked_canvass');where the stacked_canvass is the name your stacked canvass. hope this helps.

Is it possible to remove the delimiting line between Bookmarks bar and Tab bar?

I place the Tab bar between the Bookmarks bar and the page content area, as the attached image shows.
Is it possible to remove the delimiting line between Bookmarks bar and Tab bar? I feel that line is redundant.

Your Tab bar doesn't look standard.
Did you check the code with the default theme if you currently use a custom theme?
''(note that you can still use the code with a smaller font size if you like the monospace font; I do prefer this to make it easier to click the mouse)''

How to create stacked bar and standard bar on same graph

Similar Messages

Maybe you are looking for