How to create table columns dynamically ?

Hi All,
I am working on an SSRS report that will show sales in the past 5 years. If the user selected to view sales of past 3 years he will only see 3 columns. so How can I create table columns dynamically at run time and how can I make sure that their dimensions
will adjust to fit the report page size.

Hi Developer life,
According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric values) in the details, add an filter to filter the data base on this column group, but if
the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
Similar threads with details steps for your reference:
https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings
If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
Any question, please feel free to let me know.
Best Regards
Vicky Liu

Similar Messages

How to create some columns dynamically in the report designer depending upon the input selection

Post Author: ekta
CA Forum: Crystal Reports
how to create some columns dynamically in the report designer depending upon the input selection
how export this dynamic report in (pdf , xls,doc and rtf format)
report format is as below:
Element Codes
1
16
14
11
19
10
2
3
Employee nos.
Employee Name
Normal
RDO
WC
Breveavement
LWOP
Sick
Carers leave
AL
O/T 1.5
O/T 2.0
Total Hours
000004
PHAN , Hanh Huynh
68.40
7.60
76.00
000010
I , Jungue
68.40
7.60
2.00
5.00
76.00
000022
GARFINKEL , Hersch
66.30
7.60
2.10
76.00
In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
Can anybody help me how do I design such report....
Thanks

Hi Developer life,
According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric values) in the details, add an filter to filter the data base on this column group, but if
the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
Similar threads with details steps for your reference:
https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings
If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
Any question, please feel free to let me know.
Best Regards
Vicky Liu

How to create table with dynamic rows

Hi Ppl,
I have an array lets say with length of n. I want to creata table with 2 columns and no of rows = array length.
lets say array length is 3 ( array[0] = 1, array[1] = 2, array[2] = 3) so the table should have 2 columns and 3 rows.
After creation of table I want to display each array value in each row.
Can somebody help me in this asap.
Thanks \
Ashish

Hi, Thanks for reply... actually this is one part of rtf. I have put values from xml to an array and now I want to create a table with no of rows = length of array. so here xml will not be useful. could you pls think of it without xml.
result is like
lets says below is the array
array[0] = a
array[1] = b
array[2] = c
array length = 3
so there should be a table of 2 coulmns and 3 rows. Second column of first row will show 'a', Second column of second row wil show 'b' and Second column of third row will show 'c'.
Hope this is useful.
Thakns
Ashish

How to create table with dynamic amount of columns which are nested columns

M trying to fetch data and show in a javaFX table.
My table displays the details of different items from ItemVO , where :
public class ItemVO()
String itemName;
List<ItemTypeVO> type;
and My ItemTypeVO has the following attributes :
public class ItemTypeVO()
String typeName;
Integer quantity;
Integer price;
Now, i want to display the details of an item in a table in which the itemname and quantity will be displayed, the quantity column will have nested columns showing different types(typeName) as found from List<ItemTypeVO> inside ItemVO.
This question is similar to this link but my not able to find how to link a list with itemVO for nested columns. :(
Please help !!
M still unable to find a solution..
Edited by: abhinay_a on Jan 14, 2013 10:50 AM

Hi Abhilash,
Thanks for the quick reply.
Actually the problem is with the image, as I am not able to rotate 270 degree. Crystal report cannot support the rotation of image.
i have another problem, I have to create a report in which
Lables are fixed on the left side of report and 3 columns per portrait page. Those columns are
dynamically created and shown in the report.
The format is like the above. Can you please help me in doing this report, as I tried it doing
with CrossTab. I am really stuck to this report.

How to create table with rows and columns in HTMLB

Hello All,
Can any one tell me how to create table in HTMLB?
Regards,
Lisa.

Look at the sample BSP application SBSPEXT_HTMLB
also you can look at the below Blog..
/people/brian.mckellar/blog/2003/10/31/bsp-programming-htmlb-tableview-iterator
*Reward each useful answer
Raja T

How to create table in bisystem

hi,
how to create table in bi system.
My requirement is such like that i want to store data which is used in the routine.
i want to maintain the data dynamically so that i want to create the table.

Hi.........
Same as ABAP only...........using SE11........
Steps for creating table:.
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
Hope this helps......
Regards,
Debjani..........

How to create table in interactive form via Java Web Dynpro

Hi,
How to create table in interactive form via Java Web Dynpro ?
Any online tutorial / example ?
Thank you.
Regards,
Eric

Hi Eric,
Just choose the UI element Table from Form Library and drag and drop it on the form. now choose the no. of rows and columns and other settings you want about table from the wizard initiated through this process. This all is what you have to do to create the table. Now to bind it to the fields of the data source bind the individual colums to individual attributes of the node in the datasource.
Hope it will solve your query.
Regards,
Vaibhav Tiwari.

Sap script '' how to create table frame in sap script"""

i have some problem in sap script'' how to create table frame in sap script"""

Hi,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
Regards,
Omkar.

How to create dynamics columns in oracle query1.

hi,
how to create dynamics columns in oracle query.its very urgent.
regards
prasad..

Urgent is it?
Why? Have you forgotten to do your coursework and you'll get thrown off your course if you don't hand it in today?
What makes you believe that your request for help is more important than someone else who has requested help? It's very rude to assume you are more important than somebody else, and I'm sure they would like an answer to their issue as soon as they can get one too, but they've generally been polite and not demanded that it is urgent.
Also, you assume that people giving answers are all sitting here just waiting to answer your question for you. That's not so. We're all volunteers with our own jobs to do. How dare you presume to demand our attention with urgency.
If you want help and you want it answering quickly you simply just put your issue forward and provide as much valuable information as possible.
Looking at your post you haven't told us what database version you are using, you haven't provided any create table DDL's and insert statements to populate that with sample data, and you haven't even shown us that you've had a go at doing something yourself.
You will find if you post on here demanding your post is urgent then most people will just ignore it, some will tell you to get lost, and some will explain to you why you shouldn't post "urgent" requests. Occasionally you may find somebody who's got nothing better to do who will actually provide you with an answer, but you really are limiting your options by not asking properly.
/rant
As a basic example of dyanamic SQL:
DECLARE
cur PLS_INTEGER := DBMS_SQL.OPEN_CURSOR;
cols DBMS_SQL.DESC_TAB;
ncols PLS_INTEGER;
BEGIN
-- Parse the query.
DBMS_SQL.PARSE(cur, 'SELECT hiredate, sal FROM emp', DBMS_SQL.NATIVE);
-- Retrieve column information
DBMS_SQL.DESCRIBE_COLUMNS (cur, ncols, cols);
-- Display each of the column names
FOR colind IN 1 .. ncols
LOOP
DBMS_OUTPUT.PUT_LINE (cols.col_name);
END LOOP;
DBMS_SQL.CLOSE_CURSOR (cur);
END;
/

How to create table and digital signature ?

Hello,
I would like to ask two questions regarding SAP interactive forms by adobe.
1st question:
How to create table in interactive form?
Table that i can add rows and column and will show it in the form.
Example the rows and columns that i want:
ID: Name: DOB:
1 Jack 01/02/80
2 Ivy 10/12/82
2nd question:
How to create digital signature ?
I'm creating a adobe forms which need employee to sign on the form. I use signature field at my form. However, i don't know how to create a new signature and insert in the signature field.
Can any one provide the answer with step by step guide?
Thanks a lot

Hi Pradeepa,
you said you have your digital signature in
BMP format? That means Bitmap and would mean you are actually talking about a picture! THIS IS NOT A DIGITAL SIGNATURE!
A digital signature is a cryptographic key (aka public key cryptography) that is used to digitally sign a document, or at least a hash value derived from the document. Digitally signing means, applying the key in a well defined way (this is the algorithm used) to the document or hash value. You do this with your private key and the receiver of the document can then use your public key (which you can distribute in any way you want, even unsecure) to unencrypt the hash value. If this succeeds the receiver knows that the document was signed by you.
This is because both keys are mathematically related in such a way, that what one key encrypted can only be decrypted by the corresponding other key and by no other key. You even can´t decrypt a document with the same key it was encrypted with, this is the difference to symmetric encryption - please have a look at help.sap.com and search for digital signatures.
The named formats (afs, pfx and p12) are ways of coding the key, together with information about your person, such as email address and information about validity of the key into a
certificate. This type of certificate is then called a x.509 certificate and is the same you might have seen when connecting to a secure webserver such as the one of your bank website.
Signing a form with such a certificate provides for mathematically and therefore business related proove of a users identity.
In case you are really using a bitmap, this cannot work and would not serve you any good.
Ask yourself this question: I want to make sure that the form was signed by a specific person. How can I make sure that the signing can only be done by the person pretending to have done so?
A bitmap contains a picture, probably of the persons handwritten signature. How can I make sure that this picture was NOT recreated in MS Paint or Photoshop by someone else?
The answer is:
you can't! Therefore this way of prooving identity is useless.
You need to provide your users with digital signatures, put these in the certificate cache of your IE. If a user then clicks on the signing field, the private key is used to digitally sign the form - create a hash value of the form and encrypt it with the private key. After the form is send back to the server or you, you use the corresponding public key to decrypt the hash value and, as said above, if this succeeds, identity of the signer is proven.
THIS IS AN OVERSIMPLIFICATION! You might want to take a look at Adobe Reader Credentials.
Regards,
 Christian

How to create table in java

i need help on this topic
how to create table in java

lucky786 wrote:
help urgentlyI am too late?

How to create a folder dynamically in KM repository

Hi All,
Could you please let me know how to create the folder dynamically in KM...
Thanks in Advance,

>
Romano Bodini wrote:
> Hi,
>
> Search the forum. And the SDN. Then ask.
>
> [Creating folders in KM dynamically|http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1761]
>
> Romano
Actually, "look at the API documentation" should be in that list.

How to create tables in Database when webdynpro project is deployed

Hi
I Created a project.in that i created stuctures using simpletypes.Based on structure i created the Context,then created screens.Now how to create tables in database using this structures .Because i want to store the values in the database.Please help.this is very urgent.i will give good points
thanks
prasad

Hi Prasad,
You can write normal JDBC code in your controller.
Check this Web Dynpro Java
You can use the tool for generating the classes from your DB.Check this too
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/dfad6017-0301-0010-bdb8-a8b7d2006f36
Best Regards, Anilkumar

How to create sub columns in interactive report

can u tell me , how to create sub columns in
interactive report. i really need it.i search lot but i dont get proper information.
help plz...
example : -
|_____total_ persons _____|
| persons | male | female |
100 200 3000
400 500 600

i am nile.
select id as id,
male as male,
female as female
from persons.
i want interactive report with main column total persons(static text) in that male , female.
e.g.
|___total persons_| - - - - -> main cloumn
| male | female | - - - - -> sub columns
100 200
300 400
Edited by: user9512075 on Aug 29, 2008 1:46 AM
Edited by: user9512075 on Aug 29, 2008 1:47 AM
Edited by: user9512075 on Aug 29, 2008 1:48 AM
Edited by: user9512075 on Aug 29, 2008 1:49 AM

How to create table.maint.generator and enduser should use using ztcode

Hi,
can any one guide me how to create table maintanence generator and after creating,enduser must use using ztcode.
any help can be appreciated.
Thanks & Regards,
Sandeep.

Hi,
Table Maintenance generator is required to do Manual entries in the Table. If the requirement is to update the table only programmatically and not manually then table maint. generator is not required.
Manual entries in table can be maintained ( New record can be inserted / existing can be modified ) using transaction SM 30, if the table maintenance for the table is generated.
How to activate Table maint.
Goto SE11 and open the table.
Click UTILITIES -> Table Maint. Generator, Enter the details and click on Save. Then activate the table.
chk a sample 1.
refer.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
some more helps
Check out this thread:
table maintenance
http://help.sap.com/saphelp_erp2005/helpdata/en/a7/513520407a11d1893b0000e8323c4f/frameset.htm - a link for basics on Table Maintenance.
Also, Check out this weblog on table maintenance:
/people/sudheer.cheedella/blog/2006/02/20/extracting-data-in-table-maintenance
how to create a a T-code of that
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
WRITE
viewname = give ur table name.
show = X
save and check it once...
now u can able to call ur table through ur new t.code...
rgds
anver
if hlped pls mark points

How to create table columns dynamically ?

Similar Messages

Maybe you are looking for