How to create table control in script
hi expects,
how can i create table control in script?
Hi,
It is not possible to create Table Control in Sap-Scripts n u can create it by using se51 that is screen painter only...
if useful reward with points,
regards,
Madhuri.
Similar Messages
-
How to create table control and link in screen exit
Hi Friends,
I want to create table control in enhancement CONFPP07. The values entered in table control should be stored in ztable along with some other information.
But I want to know how to create table control in screen-exit and how and where to write code and how to link all.
Kindly send me step-by-step documentation or real time examble prg.
Kindly give ur answers for this problem only.
Thanks in Advance,
S.Senthil kumarIf u have a screen exit..then u will have a option to create a sub screen..in that sub screen u activate the pai and pbo events..it will show u where to write the code..
-
How to create table control without wizard....???
Hello experts !!
Plz tell me how to create table control without wizard.
for sflight table.
Scenario 1
I have one screen like 1000.
There i have taken carrid, connid, fldate as criteria.
Now i want to display Planetype, Price, Seatsmax in the table control.
Scenario 2
i have two screens 1001, 1002.
in the screen 1001 i have taken carrid, connid, fldate as criteria and there is a Button.
when i will click the button it will show the price, planetype and seatsmax in the table control in the next screen, i.e 1002
plz help me out...
and how to save new record in the dictionary table from that table control....Hi
see the sample programs and design accordingly
syntax:
CONTROLS .
if you only want to determine the row of the table control. SY´-SUBRC allows you to check if the cursor is placed in a row of a table control.
u need to comment the performs of table control fields and write ur own perform statements. And u have to declare the table control fields as separate internal tables.
Go through this urls.
www.****************
www.sap-img.com
Check the below links.
just refer to the link below
http://www.sapmaterial.com/tablecontrol_sap.html
step by step procedure with screen shots
http://www.planetsap.com/howdo_a.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbac5135c111d1829f0000e829fbfe/content.htm
http://sap.niraj.tripod.com/id25.html
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
Regards
Anji -
hi experts,
I have used table controls using wizard.is that correct .and when i am using that i cannot set filters.all the records in tha table are displayed.how to use filters here ?
what about the ordinary table controls how to create it .pls send some links and tips for it...
thanks
manicheck..
DEMO_DYNPRO_TABLE_CONTROL_1
DEMO_DYNPRO_TABLE_CONTROL_2
even check below code...
BDC Example: Using Table Control in BDC
Among beginners, using table control in BDC is always a puzzle.
Following is a sample code of handling table control in BDC.
REPORT Y730_BDC5 .
*HANDLING TABLE CONTROL IN BDC
DATA : BEGIN OF IT_DUMMY OCCURS 0,
DUMMY(100) TYPE C,
END OF IT_DUMMY.
DATA : BEGIN OF IT_XK01 OCCURS 0,
LIFNR(10) TYPE C,
BUKRS(4) TYPE C,
EKORG(4) TYPE C,
KTOKK(4) TYPE C,
NAME1(30) TYPE C,
SORTL(10) TYPE C,
LAND1(3) TYPE C,
SPRAS(2) TYPE C,
AKONT(6) TYPE C,
FDGRV(2) TYPE C,
WAERS(3) TYPE C,
END OF IT_XK01,
BEGIN OF IT_BANK OCCURS 0,
BANKS(3) TYPE C,
BANKL(10) TYPE C,
BANKN(10) TYPE C,
KOINH(30) TYPE C,
LIFNR(10) TYPE C,
END OF IT_BANK.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = 'C:\VENDOR.TXT'
FILETYPE = 'ASC'
TABLES
DATA_TAB = IT_DUMMY.
LOOP AT IT_DUMMY.
IF IT_DUMMY-DUMMY+0(2) = '11'.
IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).
IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).
IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).
IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).
IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).
IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).
IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).
IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).
IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).
IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).
IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).
APPEND IT_XK01.
ELSE.
IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).
IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).
IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).
IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).
IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).
APPEND IT_BANK.
ENDIF.
ENDLOOP.
LOOP AT IT_XK01.
REFRESH IT_BDCDATA.
perform bdc_dynpro using 'SAPMF02K' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-REF_LIFNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
IT_XK01-LIFNR.
perform bdc_field using 'RF02K-BUKRS'
IT_XK01-BUKRS.
perform bdc_field using 'RF02K-EKORG'
IT_XK01-EKORG.
perform bdc_field using 'RF02K-KTOKK'
IT_XK01-KTOKK.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-TELX1'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFA1-NAME1'
IT_XK01-NAME1.
perform bdc_field using 'LFA1-SORTL'
IT_XK01-SORTL.
perform bdc_field using 'LFA1-LAND1'
IT_XK01-LAND1.
perform bdc_field using 'LFA1-SPRAS'
IT_XK01-SPRAS.
perform bdc_dynpro using 'SAPMF02K' '0120'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-KOINH(02)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
DATA : FNAM(20) TYPE C,
IDX TYPE C.
MOVE 1 TO IDX.
LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.
CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKS.
CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKL.
CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKN.
CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-KOINH.
IDX = IDX + 1.
ENDLOOP.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-FDGRV'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFB1-AKONT'
IT_XK01-AKONT.
perform bdc_field using 'LFB1-FDGRV'
IT_XK01-FDGRV.
perform bdc_dynpro using 'SAPMF02K' '0215'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0220'.
perform bdc_field using 'BDC_CURSOR'
'LFB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0310'.
perform bdc_field using 'BDC_CURSOR'
'LFM1-WAERS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFM1-WAERS'
IT_XK01-WAERS.
perform bdc_dynpro using 'SAPMF02K' '0320'.
perform bdc_field using 'BDC_CURSOR'
'WYT3-PARVW(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
CALL TRANSACTION 'XK01' USING IT_BDCDATA
MODE 'A'
UPDATE 'S'
MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.
FORM BDC_DYNPRO USING PROG SCR.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROG.
IT_BDCDATA-DYNPRO = SCR.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM. -
How to create Table Control in Infotype
I want to create the table control in infotype (e.g. like table control in infotype 0008 basic pay ).
Hi
you can declare an internal table from infotype, with something like this
DATA: BEGIN OF t_p0008 OCCURS 0.
INCLUDE STRUCTURE pa0008.
DATA: END OF t_p0008.
the transparent table for infotype 0008 is PA0008, there is an structure P0008.
the transparent table for infotype 0001 is PA0001,
the transparent table for infotype 0002 is PA0002,
and so on.. -
How to create table form in scripts
hi experts how to display elements in table format with cloumn headings and all.if anybody can answer it ill be help ful.
hi sagarika,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
~~Guduri -
hi experts,
How to handle table control in scripts pls suggest me in this regard.
regards,
k.rajesh.Hi,
Refer to:
SAP Script - Tables creation & displaying data in right place in table?
creating tables in sapscript
Regards,
Priyanka. -
Sap script '' how to create table frame in sap script"""
i have some problem in sap script'' how to create table frame in sap script"""
Hi,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
Regards,
Omkar. -
How to create tables for control data
HI
How to create tables for controls of types of data (screen control)? what is the process for this
Regards,
AnilWell, do you want to do it the easy way? If so, then just create a table maintenance program. You can do this via SE11, utilites, table maintenance generator. The table maintenance will be generated and you can then maintain the table via SM30.
If you want to go the more challenging way, you can write your own table maintenance program using a table control on your screen. You can use the table control wizard to help you along.
Regards,
Rich Heilman -
How to Create a Control In Notepad
Hello:
I am need help creating a control file. I have never done this before. I have to load the following script into notepad:
load data
infile 'names.txt'
badfile 'names.bad'
truncate
into table names
fields terminated by ','
trailing nullcols
(first,last)
I then went to Command Prompt to begin the SQL Loader command and recieved the following message.
SQL*Loader-500: Unable to open file (names.ctl)
SQL*Loader-553: file not found
SQL*Loader-509: System error: The systemDUPLICATE post
How to Create a Control In Notepad -
How to handle table control in BDC while uploading item details for anorder
How to handle table control in BDC while uploading item details for an order?
What is the use of CTU_PARAMS structure in BDC?
In Finance I have done some changes to the layout set by coping to a zscript(duning letter) and how can assign the print program?
What is the process to test the finance script?
How can I see the print preview whether it is coming correctly or not?
Thanks in advance.
Regards.
Abhilash.hi,
for the bdc control refer the following link:
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
ctu_params:
refer to the link
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/dataTransfers-LSMW%2CALE%2C+BDC
reward if useful,
thanks and regards -
How to handle Table control in BDC
How to handle Table control in BDC
HI,
Table Control in BDC
HI,
Refer the link:
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
The concept is easy: it has to indicate the index of the table control in the field name, so if you have to populate the first record of table control:
BDC-FIELDNAME = <FIELDNAME>(01).
If you fill the second row:
BDC-FIELDNAME = <FIELDNAME>(02).
and so....
Now the problem is usually on how many records you have to load, because u can fill only the rows of table control available in the screen, If you have more records than it can be displayed yuo have to simulate the command to go next page.
The number of recod can be displayed can depend on pc resolution and many program haven't command to go to next page (in this case it could be impossible create a BDC program9.
A way to create a bdc program resolution indipendent is to work on the first and second row.
- Place the first hit in the first row of bdc;
- Place the second insert in the second row of bdc;
- Place the last hit to the top of table control;
- Place the next hit in the second row;
- Place the last hit to the top of table control;
- Place the next hit in the second row;
- .... and so
For more info: Search in SDN with TABLE CONTROL IN BDC.
Will get a lot of related links.
<b>Reward points if this Helps.
Manish</b> -
How to use table control in LSMW
Hello All,
I have requirement to use LSMW , in my using transaction have table control ,I need to pass values in table control . how to use table control in LSMW .Can any one give me the solution for this.
Best regards,
Satya.Note: The recording function records a fixed screen sequence. It cannot be used for migrating data containing a variable number of items or for transactions with dynamic screen sequences!
Tip: It is possible to create a recording via SHDB, generate a program out of this recording, and adopt the program to your needs and registrate the program to be able to use it in LSMW.
Thats means, for creation of project and WBS Elements is not possible through
1. LSMW-BDC (For both CJ01 and CJ20n)
2. LSMW-BAPI (Method: Maintain is not listed )
3. LSME-Standard Batch Direct Input.
Its possible through programmatically(SE38.) either using BAPI Or BDC.
Thanks, -
How to create ArrayColletion in mx:Script from <mx:Model
id="results" source="/data/data.xml" />
Please see my code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:Model id="results" source="/data/data.xml" />
<mx:Script>
import mx.collections.ArrayCollection;
import mx.utils.ArrayUtil;
import mx.controls.Alert;
</mx:Script>
<mx:ArrayCollection id ="dt1"
source="{ArrayUtil.toArray(results.result)}"/>
<mx:Script><![CDATA[
[Bindable]
public var expenses:ArrayCollection = dt1;
[Bindable]
public var expenses2:ArrayCollection = dt1;
[Bindable]
public var dp:ArrayCollection=expenses;
public function changeDataProvider():void{
Alert.show(expenses.toString());
if (dp==expenses){
dp=expenses2;
}else{
dp=expenses;
]]></mx:Script>
<mx:Panel x="10" y="10" width="100%" height="378"
layout="absolute">
<mx:ColumnChart dataProvider="{dt1}" x="10" y="10"
id="myChart" height="318" width="100%">
<mx:horizontalAxis>
<mx:CategoryAxis categoryField="month"/>
</mx:horizontalAxis>
<mx:series>
<mx:ColumnSeries displayName="apple" yField="apple"/>
<mx:ColumnSeries displayName="orange"
yField="orange"/>
<mx:ColumnSeries displayName="banana"
yField="banana"/>
</mx:series>
</mx:ColumnChart>
<mx:Legend dataProvider="{myChart}" x="481" y="10"/>
</mx:Panel>
<mx:Button x="284" y="416" label="Change Data" id="bt"
click="changeDataProvider()" />
</mx:Application>Tracy,
Thanks. That worked. However I have another related question:
I convert the xml feed to a XMLListCollection by doing:
<mx:XMLListCollection id="mission"
source="{xmlFeed.lastResult.day}"/>
and
<mx:XMLListCollection id="mission1"
source="{xmlFeed.lastResult.day.tBlock}"/>
On the chart I have
<mx:ColumnChart id="missionReadiness" height="150%"
width="100%"
paddingLeft="2" paddingRight="2"
showDataTips="true" dataProvider="{mission1}">
<mx:series>
<mx:ColumnSeries xField="" yField="@today"
displayName="Today"/>
<mx:ColumnSeries xField="" yField="@tomorrow"
displayName="Tomorrow"/>
<mx:ColumnSeries xField="" yField="@afterT"
displayName="After Tomorrow"/>
</mx:series>
</mx:ColumnChart>
the yField works, but for the xField I want to have the @date
but refers to the parent node, so I am clueless on how to refer to
it.
Also, I would like to display on the chart only the values to
a specific date (like @date="05/17/2007").
Any suggestions on how to do that?
Gilbert -
Getting Error when createing Table control in Module Pool.
Hi expert ,
i am creating a module pool program . i want to crate line item value for that i have created table control on screen 200 .
but when i am activation to that giving error below mention.
The field "ZFBDCHALLAN-EBELN" is not assigned to a loop. "LOOP ...ENDLOOP" must appear in "PBO" and "PAI".
thanks
chandraIts mandatory to have loop endloop in both events
PBO and PAI
loop your internal table similarly.
Please check it should be below format
PROCESS BEFORE OUTPUT.
* Set PF Status for screen 100.
MODULE status_0200.
* This module will initialize the field
MODULE init_0100.
LOOP AT t_custmat_asg INTO w_custmat_asg
WITH CONTROL tc_1
CURSOR tc_1-current_line.
* It will count the record in internal table
MODULE set_linecount.
* Screen Modifications
MODULE status_check.
ENDLOOP.
PROCESS AFTER INPUT.
* Module AT EXIT-COMMAND
MODULE exit_0200 AT EXIT-COMMAND.
LOOP AT t_custmat_asg .
CHAIN.
FIELD :
w_custmat_asg-check,
w_custmat_asg-kunnr,
w_custmat_asg-name1,
w_custmat_asg-asgtyp,
w_custmat_asg-productcls,
w_custmat_asg-sctegry,
w_custmat_asg-ctegry,
w_custmat_asg-parent,
w_custmat_asg-frmdate,
w_custmat_asg-todate,
w_custmat_asg-frecster,
w_custmat_asg-salesrep,
w_custmat_asg-flag,
w_custmat_asg-username,
w_custmat_asg-udate.
* Validation For Forecaster.
MODULE validate_forecaster.
* Validation For Salesrep.
MODULE valiate_salesrep.
* Validation for Customer
module validate_customer.
* Validate null value
module validate_null_vals.
* Validation For Data Changed On The Screen
MODULE data_changed_0200 ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
Regards
Satish Boguda
Maybe you are looking for
-
N78 v20.149 Bug List Thread
Hi everyone, thanks for all your advice and comments now that v20.149 has been released here (only on FOTA and not NSU yet) are the changes I have noticed, along with some newly discovered bugs: NOTE: all the documented features/improvements are perf
-
My HP 530 DVD RW has stopped working and does not show when I try to 'explore' to it. It will open and close fine. I'm using Windows Vista Business. Device Manager has yellow ! by the DVD device and says: This device cannot start. (Code 10) Click 'C
-
HT4113 How do i unlock my disabled mini i pad
how do i unlock my disabled mini i pad
-
After downloading Pages upgrade I now can only open Word docs and not any of the Page docs I've saved.???
-
BoBo Search results in check status not showing the BoBo requisitioner name
Hi, I was trying to pull all the bobo carts created with my user id using extended search. However, the search results doesn't have any column to represent the Name of approver,for whom i created the cart. i.e "Shop For" value .. Do we have any worka