How to create text box where input is time only.

Hi ,
How can I create a textBox which accept Time only. Or how can i create a text Box so that it take two numbers before and after ":"
Like ->
12 : 34. User can see : however have permission to edit numbers.
Any suggestions.
Regards
Richa

Havent used them myself but i think a JFormattedTextField is what you will need.
See this link http://www.java2s.com/Tutorial/Java/0240__Swing/FormattedDateandTimeInputDateFormatgetTimeInstanceDateFormatSHORT.htm

Similar Messages

How to create text box with multiple lines in selection screen.

Hi,
i need to create a text box to capture comment with 300 characters. i want to achive this without using module pool,is there any posibilities to that
regards
raja

Since text on Report screens is limited basically to what's left on a line in the selection screen, you'll have to use Module Pool.
however, you can call a screen from a report program and use the editor within a Custom Control on the screen. Not a tough thing to do.

How to create check box in ALV Reports?

how to create check box in ALV Reports?

Hi
check the report BCALV_TEST_GRID_EDITABLE
or
check this report
REPORT ZRFC346_TST.
TABLES:SFLIGHT,RL034.
TYPE-POOLS:SLIS.
INCLUDE:<ICON>,<SYMBOL>.
DATA: G_REPID LIKE SY-REPID,
 G_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
 G_IT_SORT TYPE SLIS_T_SORTINFO_ALV,
 G_LAYOUT TYPE SLIS_LAYOUT_ALV,
 G_TABNAME_HEADER TYPE SLIS_TABNAME,
 G_TABNAME_ITEM TYPE SLIS_TABNAME,
 G_KEYINFO TYPE SLIS_KEYINFO_ALV,
 G_VARIANT LIKE DISVARIANT,
 G_EXTAB TYPE SLIS_T_EXTAB,
 I_SLIS_EXIT_BY_USER TYPE SLIS_EXIT_BY_USER.
DATA: XEVENT TYPE SLIS_T_EVENT,
 AEVENT TYPE SLIS_ALV_EVENT,
 VARIANT LIKE DISVARIANT,
 LAYOUT TYPE SLIS_LAYOUT_ALV,
 ASP_GROUP TYPE SLIS_SP_GROUP_ALV,
 GT_SP_GROUP TYPE SLIS_T_SP_GROUP_ALV,
 EXTAB TYPE SLIS_T_EXTAB WITH HEADER LINE,
 XFIELD TYPE SLIS_T_FIELDCAT_ALV,
 AFIELD TYPE SLIS_FIELDCAT_ALV,
 G_SUCOMM LIKE SY-UCOMM,
 G_SELFLD TYPE SLIS_SELFIELD.
DATA: SAV_SY_REPID LIKE SY-REPID.
CONSTANTS: CON_SFLIGHT TYPE LVC_FNAME VALUE 'SFLIGHT',
 CON_DISPLAY_FULL TYPE I VALUE 3.
Data to be displayed
DATA: BEGIN OF GT_SFLIGHT OCCURS 0.
 INCLUDE STRUCTURE SFLIGHT.
DATA:ACTIVATE(1).
DATA: END OF GT_SFLIGHT.
INITIALIZATION.
*........Initialisierung...............................................
PERFORM INITIALIZATION_RL034.
*........Field cata....................................................
PERFORM FIELD_CAT.
*........SPECIAL GROUP.................................................
PERFORM E07_SP_GROUP_BUILD USING GT_SP_GROUP[].
START-OF-SELECTION.
Selection
SELECT * FROM SFLIGHT INTO TABLE GT_SFLIGHT.
*........ALV CALL.......................................................
PERFORM ALV_CALL.
PERFORM USER_COMMAND_LOCAL USING G_SUCOMM G_SELFLD.
 FORM USER_COMMAND_LOCAL *
--> G_UCOMM *
--> G_SELFIELD *
FORM USER_COMMAND_LOCAL USING G_UCOMM LIKE SY-UCOMM
 G_SELFIELD TYPE SLIS_SELFIELD.
CASE G_UCOMM.
 WHEN 'ACT'.
ENDCASE.
ENDFORM.
 FORM ALV_CALL *
FORM ALV_CALL.
Call ABAP List Viewer (ALV)
G_LAYOUT-BOX_FIELDNAME = 'ACTIVATE'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_BACKGROUND_ID = 'ALV_BACKGROUND'
 I_BYPASSING_BUFFER = SPACE
 I_BUFFER_ACTIVE = SPACE
 I_CALLBACK_PROGRAM = SAV_SY_REPID
 I_CALLBACK_PF_STATUS_SET = 'STATUS'
 I_CALLBACK_USER_COMMAND = 'USER_COMMAND_LOCAL'
 I_CALLBACK_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_END_OF_LIST = ' '
 I_STRUCTURE_NAME = 'SFLIGHT'
 I_BACKGROUND_ID = ' '
 I_GRID_TITLE =
 I_GRID_SETTINGS =
 IS_LAYOUT = G_LAYOUT
 IT_FIELDCAT = XFIELD[]
 IT_EXCLUDING =
 IT_SPECIAL_GROUPS = GT_SP_GROUP[]
 IT_SORT =
 IT_FILTER =
 IS_SEL_HIDE = 'X'
 I_DEFAULT = 'X'
 I_SAVE = 'A'
 IS_VARIANT =
 IT_EVENTS = XEVENT
 IT_EVENT_EXIT =
 IS_PRINT =
 IS_REPREP_ID =
 I_SCREEN_START_COLUMN = 0
 I_SCREEN_START_LINE = 0
 I_SCREEN_END_COLUMN = 0
 I_SCREEN_END_LINE = 0
 IT_ALV_GRAPHICS =
 IT_ADD_FIELDCAT =
 IT_HYPERLINK =
 I_HTML_HEIGHT_TOP =
 I_HTML_HEIGHT_END =
 IT_EXCEPT_QINFO =
 IMPORTING
 E_EXIT_CAUSED_BY_CALLER =
 ES_EXIT_CAUSED_BY_USER =
 TABLES
 T_OUTTAB = GT_SFLIGHT
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
 FORM status *
--> EXTAB *
FORM STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STAT' EXCLUDING EXTAB.
ENDFORM. " STATUS
*& Form INITIALIZATION_RL034
 text
--> p1 text
<-- p2 text
FORM INITIALIZATION_RL034.
SAV_SY_REPID = SY-REPID.
ENDFORM. " INITIALIZATION_RL034
*& Form DEFINE_EVENTS_RL034
 text
--> p1 text
<-- p2 text
FORM DEFINE_EVENTS_RL034.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 I_LIST_TYPE = 0
 IMPORTING
 ET_EVENTS = XEVENT.
 exceptions
 list_type_wrong = 1
 others = 2.
ENDFORM. " DEFINE_EVENTS_RL034
*& Form FIELD_CAT
 text
--> p1 text
<-- p2 text
FORM FIELD_CAT.
DATA: LS_FCAT TYPE SLIS_FIELDCAT_ALV,
 L_LIN TYPE I.
REFRESH XFIELD.
 1. per Default eingeblendete Felder *
*........Ikone/Symbol..................................................
CLEAR AFIELD.
DATA: LS1_FCAT TYPE SLIS_FIELDCAT_ALV,
 L_LIN1 TYPE I.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
 EXPORTING
 I_STRUCTURE_NAME = CON_SFLIGHT
 I_BYPASSING_BUFFER = SPACE
 I_BUFFER_ACTIVE = SPACE
 CHANGING
 CT_FIELDCAT = XFIELD
 EXCEPTIONS
 INCONSISTENT_INTERFACE = 1
 PROGRAM_ERROR = 2
 OTHERS = 3.
DESCRIBE TABLE XFIELD LINES L_LIN1.
ADD 1 TO L_LIN1.
CLEAR LS_FCAT.
LS1_FCAT-FIELDNAME = 'ACTIVATE'.
LS1_FCAT-CHECKBOX = 'X'.
LS1_FCAT-KEY = 'X'.
LS1_FCAT-INPUT = 'X'.
LS1_FCAT-EDIT = 'X'.
LS1_FCAT-INTTYPE = 'C'.
LS1_FCAT-DATATYPE = 'CHAR'.
LS1_FCAT-INTLEN = 1.
LS1_FCAT-COL_POS = L_LIN1.
LS1_FCAT-SELTEXT_S = LS1_FCAT-FIELDNAME.
LS1_FCAT-SELTEXT_M = LS1_FCAT-FIELDNAME.
LS1_FCAT-SELTEXT_L = LS1_FCAT-FIELDNAME.
LS1_FCAT-SP_GROUP = 'A'.
APPEND LS1_FCAT TO XFIELD.
ADD 1 TO L_LIN.
ENDFORM. " FIELD_CAT
FORM E07_SP_GROUP_BUILD USING E07_LT_SP_GROUP TYPE SLIS_T_SP_GROUP_ALV.
DATA: LS_SP_GROUP TYPE SLIS_SP_GROUP_ALV.
CLEAR LS_SP_GROUP.
LS_SP_GROUP-SP_GROUP = 'A'.
LS_SP_GROUP-TEXT = 'SPECIAL'.
APPEND LS_SP_GROUP TO E07_LT_SP_GROUP.
ENDFORM.
Regards
Shiva

How to create Option Boxes IN A SELECTION SCREEN

How to create Option Boxes IN A SELECTION SCREEN.
Thanks!

Hi Rajesh,
The following explanation gives clear picture of what is mean of check box and radio button with coding.....................
CHECK BOX :
AS CHECKBOX [USER-COMMAND fcode]
Effect:
This addition specifies that the input field in the first position of the selection screen is displayed as a checkbox, with the corresponding description next to it on the right. The checkbox is selected if the value of para is "X" or r "x". Otherwise, it is not selected.
The parameter must be created with the type c and length 1. An explicit length len is not permitted. If the addition TYPE is used, this can only be followed by the generic type c or a non-generic data type of type c and length 1.
The addition USER-COMMAND can be used to assign a function code fcode to the parameter. The function code fcode must be directly specified and may have a maximum length of 20 characters. To evaluate the function code, an interface work area of the structure SSCRFIELDS from the ABAP Dictionary must be declared using the statement TABLES. When the user selects the checkbox on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
Notes
If the TYPE addition is used to make a reference to a data type in the ABAP Dictionary of type CHAR and length 1, and for which t the valid values in the domain are defined as "X" and " ", the parameter is automatically displayed as a checkbox on the selection screen.
If the addition USER-COMMAND is specified without the addition AS CHECKBOX, and the parameter is of type c with length 1, it is also displayed as a checkbox.
The addition USER-COMMAND can, for example, be used for screen modifications with the addition MODIF ID (see example).
Coding :
PARAMETERS show_all AS CHECKBOX USER-COMMAND flag.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p1(10) TYPE c,
 p2(10) TYPE c,
 p3(10) TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS: p4(10) TYPE c MODIF ID bl2,
 p5(10) TYPE c MODIF ID bl2,
 p6(10) TYPE c MODIF ID bl2.
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
 IF show_all <> 'X' AND
 screen-group1 = 'BL2'.
 screen-active = '0'.
 ENDIF.
 MODIFY SCREEN.
ENDLOOP.
RADIO BUTTON COMMAND :
RADIOBUTTON GROUP group [USER-COMMAND fcode]
Effect:
This addition specifies that the input field is displayed as a radio button in the first position on the selection screen, and the output field is displayed next to it on the right. The radio button is selected if the value of para is "X" or "x". Otherwise, it is not selected.
group is used to define the radio button group for the parameter. The name group is entered directly as a character string with a maximum of 4 characters. Within a selection screen, there must be a minimum of two parameters in the same radio button group. There cannot be more than one radio button group with the same name in one program, even if they are defined in different selection screens.
The parameter must be specified with the type c and length 1. Explicit length specification using len is not permitted. If the addition TYPE is used, it can only be followed by the generic type c or a non-generic data type of type c and length 1.
In a radio button group, only one parameter can be defined with the addition DEFAULT, and the specified value must be "X". By default, the first parameter in a radio button group is set to the value "X", and the rest are set to " ".
The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. To evaluate the function code, an interface work area of the structure SSCRFIELDS from the ABAP Dictionary must be declared using the statement TABLES. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
Note:
It is recommended to define the radio buttons of a radio button group directly underneath each other. If the selection screen also contains other elements, it is recommended to define each radio button group within a block surrounded by a frame.
CODING :
tables : mkpf,mseg,ekko.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1,
 c as checkbox.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X' USER-COMMAND UC1.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
write :/ p_werks,
 / s_ebeln.
AT SELECTION-SCREEN OUTPUT .
LOOP AT SCREEN .
IF R1 EQ 'X' AND SCREEN-GROUP1 EQ 'S2'.
SCREEN-INPUT = 0.
SCREEN-REQUIRED = 1.
clear s_ebeln[].
clear p_werks.
MODIFY SCREEN.
ENDIF.
IF R2 EQ 'X' AND SCREEN-GROUP1 EQ 'S1'.
SCREEN-INPUT = 0.
SCREEN-REQUIRED = 1.
clear s_ebeln[].
clear p_werks.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Let me knwo if any doubts.
Reward with points if it helpful
Regards,
Vijay

How to create check box in tabular form

Dear Friends
i have craeaed tabular form .Recently all column are default text field but i want to change some column from text field to check box .
i have try it with simple check box but there is no option to pass return value in to table.
How to create check box in tabular from.
select
"CLAIM_ID",
"CLAIM_ID" CLAIM_ID_DISPLAY,
"EMPLOYEE_ID",
"CLAIM_DATE",
"START_FROM",
"END_TO",
"REIMB_NAME",
"REIMB_AMOUNT",
"REMARK",
"ACTIVE_FLAG",
"STATUS",
"APPROVE_NO",
"APPROVE_FLAG"
from "EMP_REIMBURSEMENT_DTL
{code}
i want to change column from text field to Check box
Cplumn Name :
1.ACTIVE_FLAG Return value 'Y'
2.STATUS Return Value "APPROVE"
How to pass it with check box in tabular form.
Thanks

Visit this demo app:
http://apex.oracle.com/pls/otn/f?p=31517:1
Section VI has a lot of tabular form stuff with checkbox handling.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
https://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

How to create dropdown box, radio button,check box in wad

Hi,
How to create dropdown box, radio button,check box in wad.
Thanks,
cheta.

Cheta,
This are all standard Web Items in the WAD. Drag them onto your template and then make the changes you need to them in their Properties.
Regards
Gill

How to create text table

can anyone tell, how to create text table in abap.

Hi,
Follow this procedure
To create a text table for a table ZABC,
1. you have to create a ZABCT table with the field = all the primary fields of table ZABC + SPRSL type SPRAS + Text field.
2. Every other field except the text field should be primary key fields.
3. Maintain a foreign key relationship between ZABC and ZABCT over the field required field (in TSTCT the required field is TCODE).
4. Activate the table.
5. Now you should be able to traverse to the text table ZABCT from ZABC (menu path: Goto->Text Table)
Hope this will help.
Regards,
Nishit

How to create text fields & assign values form sql in ADF

Hi all,
I am new to oracle ADF,
i want know how to create text fileds and how to assign the values to those fields from plsql.
Regards
Prakash

http://technology.amis.nl/blog/3315/creating-an-adf-application-based-on-plsql-api-part-one-reading-data-as-a-collection-of-sql-type-objects
Hope this will help.
~Krithika

Changing text features (font, point size etc) in multiple text boxes at the same time

That pretty much says it all: I'm using pages for some simple initial rendering to send my graphic designer and it would save me some time if I could change the font & point-size for all the various text boxes at the same time.
Cheers,
Rax

Thank you both!
How 'bout changing the actual content uniformly? Am I still stuck changing each box individually? I know that I am pushing it to do things that it wasn't made for, but I can dream, can't I?
Thanks again,
Rax

How to create a contract? ( Types: volume,time,quality contracts)

Hi Gurus,
How to create a contract? ( Types: volume,time,quality contracts)
Give the procedure to create above mentioned types of contract.
Bye
Narasimha Rao Gunda

1.Access the transaction choosing one of the following navigation options:
SAP ECC menu     Logistics  Materials Management  Purchasing  Outline Agreement  Contract  Create
Transaction code     ME31K
2.On the Create Contract: Initial Screen, enter the following values and choose Enter:
     Vendor               xxxx
     Agreement type          MK
     Agreement date          Todayu2019s date
     Purchasing Organization
     Purchasing Group          xxx
     Plant               xxx
3.On the Create Contract: Header Data screen, in Validity End field, enter end date (e.g. two years in the future) of the contract and choose Enter.
4.On the Create Contract: Item Overview screen, enter the following values:
     Material
     Target Quantity      10000
     Net price          xxxx usd per 100 PC
     Plant          1000
5.Remark: Delete any entry in the field storage location.
6.Additional step:
If you want to use the information of an existing info record mark the line of the agreement item (item 10) and go to Environment  Info record. On the Info record: General Data screen choose Conditions. On the screen Display Gross Price Condition (PB00): Condition Supplements you can see the value of the gross price (here: 1282.5 per 100 pieces.).
7.Choose Save (Check if the automatic print function of the contract works).

How to create a transport request with query and only with its structure.

HI guru,
how to create a transport request with query and only with its structure.transport request should not include any other query items like ( variables, conditions...etc)
thanks in advance.
venkata

Hi,
Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
Regards,
anil

How to edit text box in Acrobat XI, created by prior versions of Acrobat

Hi, I'm having a difficult time trying to figure out how to edit a text box that was created in an older verison of Acrobat and used to fill out a form.
In my case, I've added text boxes over pre-existing text using an older version of Acrobat.
When I try to click on the text box, however, it seems to pick up on the pre-existing text and not allow me to edit the text box that I created in the past.

Try to edit the text with the 'Add Text Comment' tool which resides in Comment pane. The text used to fill the form may have been written as annotation, hence when you are trying to edit those with editing tools, original text is being edited.

How to create paragraph box type format in screen painter?

Hi Experts,
I am designing a screen and stuck where, I have to create a field name "REMARKS" which will show the input/output text box in Paragraph format.
I want a textbox which can show the input values write by user as remarks upto 250 characters.
Thanks,
Deepanshu

Hi,
This is called a textedit control, which is one of the controls that are part of the control framework .
To embed it in a screen, you may for instance define a custom container in your dynpro,
See demo programs SAPTEXTEDIT_TEST_*. And [SAP Library: SAP Textedit|http://help.sap.com/saphelp_nw70/helpdata/en/f1/549e36cf0ecb7de10000009b38f889/frameset.htm ]
Note that dynpro fields allow to enter up to 255 characters, but it's only in one line, and you can't see everything at a time, you need to "scroll" (i.e. moving the text cursor) inside the field.
You may also use EDIT_TEXT_INLINE function module.
Sandra

How to center Text Box on Web Page? -- Web dev with Word 2013

I'm trying to assist a user who wants to use Word 2013 for simple web page development.
There are many tools but they want to use Word 2013.
Actually have it working by saving the Word 2013 files as web pages... like index.htm, about.htm, etc.
The problem is when we use the "Insert" tab in Word to create a "Text Box" or a "Shape" ...
And align it centered on the page... it looks fine in Word but when we open it with a web browser the "Text Box" or "shape" are no longeer centered.
We thought we had it fixed by making the "Text Box" Layout Options "In Line with Text" but again... looks fine in Word but not in a web browser.
The question: How can we get a "Text Box" in Word 2013 to appear centered on a web page?
thanks for any help.

Hi:
For webpage design, I would suggest customized form under develop tab on the Ribbon over insert object directly. I tested from my side, using customized form will lock the object position on the
page.

How to expand text box size automatically (and avoid the scroll-bar).

When I enter a box for multi-line text, upon converting to .pdf, a scrollbar appears if the text does not fit into the box. I don't want this. I want the text box size to automatically increase.

http://community.skype.com/t5/Windows-desktop-client/How-can-I-change-the-height-of-the-input-box-in...

How to create text box where input is time only.

Similar Messages

Maybe you are looking for