How to Create the BSP t o display PDF Document

Hi Experts,
I need to create the document for the Annuitant (Retriees) through they will inform their annuity department still they are surviving....so based upon that,Annuitant department run the annuity payslip for him.......
If they died they will go for final settlement...so this is the business requirement for this document...
In that documnet, It holds common information like company information in the top and respective employee information like EMP ID and his contact address in the down......
For ex: If Employee "X" is Login into portal .That document should contain common information like company name and employee's "X" information like his EMP ID and his contact address .Like wise the form should generate both common address and employee respective information.....both in Arabic and in English....
Is there any readymade BSP or Iview for this (or) if anybody have developed same kind of BSP or somehow related to his scenario, pls send the code to [email protected]
How to do that.....its very urgent.......
Help will be higly apppreciated.......
Thanks in Advance ,
Jasmine

Hi Jasmine,
I think you should try the SDN Search the next time before posting. You would have found this: [BSP/HowTo: Generate PDF Output from a BSP|https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1002]. Also crossposting the same question is a bad behaviour.
Best regards
Gregor

Similar Messages

How to create the BSP to display the document in two lang(English & Arabic)

Hi ,
I got the requirement where i need to create the form for the Annuitant (Retriees) through they will inform their annuity department still they are surviving....so based upon that,Annuitant department run the annuity payslip for him.......
In that I should keep company information in the top and resprctive employee information like EMP ID and his contact address need to specify by default.....
For ex: Employee X is clicking this form..it should contain common information like company name and also employee's "X" respective information like his EMP ID and his contact address like wise the form should generate both common address and employee respective information.....both in Arabic and in english....
Is there any readymade BSP for this or if anybody have developed same kind of BSP pls send the code to [email protected]
How to do that.....ist very urgent.......
Help will be higly apppreciated.......
Thanks in Advance ,
Jasmine

Hi ,
You can use BSP Application HAP_DOCUMENT for creating/modifying appraisal forms.
use the page document_todo.htm
Create a BSP Iview for documnet_todo.htm in the Portal...

How to Create the BSP for two languages(English & Arabic)

Hi ,
I got the requirement where i need to create the form for the Annuitant (Retriees) through they will inform their annuity department still they are surviving....so based upon the annuitant department run the annuity payslip for him.......
In that I should keep company information in the top and resprctive employee information like EMP ID and his contact address need to specify by default.....
For ex: Employee X is clicking this form..it should contain common information like company name and also employee's "X" respective information like his EMP ID and his contact address like wise the form should generate both common address and employee respective information.....both in Arabic and in english....
Is there any readymade BSP for this or if anybody have developed same kind of BSP pls send the code to [email protected]
How to do that.....ist very urgent.......
Help will be higly apppreciated.......
Thanks in Advance ,
Jasmine

Hi Jasmine,
I think you should try the SDN Search the next time before posting. You would have found this: [BSP/HowTo: Generate PDF Output from a BSP|https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1002]. Also crossposting the same question is a bad behaviour.
Best regards
Gregor

Display PDF document from Servlets to browser - how 2 change the title

Hi, need help of changing the html title when Display PDF document from Servlets to browser. By default the browser's title shows the obsolute URL where the rdf comes from (i.e. http://www.google.com/sample.pdf), because servlet responds a binary data (PDF), there seems to be no other way to change the browser's title to fit my own choice.
Appreciate your quick help,

You can try and check with
.setTitle("Welcome");

How to create an applet that shows a pdf as non-editable.

Hi friends,
Does any one know how to create an applet that shows a pdf document (should make that pdf a non-editable one) while clicking a link.Its urgent for me as I have to complete this one tomorrow itself...please help me...
I am able to view the pdf document but that cannot be make a non-editable one.
Can anyone gave me the code for that one....please I am not very much good in Java.

PDF is a proprietary format and Java doesn't support it by default. Are you using a 3rd party tool to create the PDF? If so, you need to review the developer docs to see how to make the document non-editable. Frankly, I don't see why you're using an Applet to view a PDF in the first place. What exactly are you trying to do. I'm confused.

How to create the web template

Hi BW Experts,
how to create the web template.....!
I just want to know what is the use of Web template. i want to display the report
in WEB-UI screen ( sap-crm 7.0 portal ) can any one help me please how to proceed ...!
Thanks
shahina..!

Hiu2026
Steps to follow to create WAD in WEB Template in 3.5 or 7.0 u2026u2026..
Go to All programs and select your web application designer
Select the button to create a new page in WAD
Select the chart and place in the layout
Next goto Data provider Target and select your query
Give your report name in the given data provider screen
Select your query in History/find/Favourites/Infoareas button
Select your query in this screen and click OPEN
Now we can see the data provider is assigned to the chart.
To edit the chart you have to right click on the chart
After right click on it we will find another screen where we can edit all the settings
In this screen we can find NEXT click button to change our settings
In this screen we can state the tasks (Title, units, values, range)
In this screen we can change our background /validity/color
In this screen we can add values to the chart
In this screen we can add validity/positions/order/axis types to the chart
In this screen we can change the global settings/and overview of the chart.
This screen shows that we have customized the chart successfully
After successful creation of the chart we have to save the chart
Save your chart in your favorites by giving the description and technical name in the given block.
Now execute your WAD by selecting the execute button
The BEx Web Application Designer is a desktop application for creating Web applications with BW-specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps. This HTML page (Web application) provides the basis for not only Web applications with complex interaction, but also for Web cockpits and iViews.
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
Web Application Designer for Beginners
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
Web Application Solutions: A Designer's Guide
http://www.lukew.com/resources/webapplicationsolutions.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/bw-web-application-designer-1955944
Feautures of WAD in 7.0
http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6

How to set the number of records displayed at run time

Is it possible to set the number of records displayed block property at run time? The built-in 'GET_BLOCK_PROPERTY' can retrieve the number of RECORDS_DISPLAYED. But I can't find SET_BLOCK_PROPERTY to set this property. Is there anyway I can set this property programmatically? Thanks for any suggestions!

Bookmark Go to End
goal: How to vary the number of records displayed in a block
programmatically
fact: Oracle Forms Developer
fix:
Block property 'Number of Records Displayed' can not be changed during runtime
using SET_BLOCK_PROPERTY. However, it is still possible programmatically change
the visual appearance of the form so that it creates effect of changing this
property. To achieve such an effect follow these steps:
1. in Forms Builder, in the multirecord block define the new set of items.
The simplest way is to copy/paste the original item and rename created item.
2. set properties of these new items so that they are the same as the properties
of the original items. If these new items were copied from original items
then properties are already the same. Modify following properties
'Database item' on new items to value 'No'
'Synchronize with item' to the value of the original item
'Number of Items Displayed' to desired value.
'Visible' to 'No'
In other words, these new items are mirrors of original items.
3. code event, which is meant to trigger the change in block appearance.
This code should use SET_ITEM_PROPERTY built-in to set properties
like 'VISIBLE', 'ENABLED', 'NAVIGABLE', 'UPDATE_ALLOWED' and others
to desired value for items which are about to be displayed, then
move cursor to one of these just displayed items with GO_ITEM built-in
and then hide the previously displayed items.
Example:
Assume that the block is built on SCOTT.DEPT schema. Following will
change the set of displayed items
set_item_property('dept.mdeptno',visible,property_true);
set_item_property('dept.mdname',visible,property_true);
set_item_property('dept.mloc',visible,property_true);
set_item_property('dept.mdeptno',enabled,property_true);
set_item_property('dept.mdname',enabled,property_true);
set_item_property('dept.mloc',enabled,property_true);
set_item_property('dept.mdeptno',update_allowed,property_true);
set_item_property('dept.mdname',update_allowed,property_true);
set_item_property('dept.mloc',update_allowed,property_true);
set_item_property('dept.mdeptno',navigable,property_true);
set_item_property('dept.mdname',navigable,property_true);
set_item_property('dept.mloc',navigable,property_true);
go_item('dept.mdeptno');
set_item_property('dept.deptno',visible,property_false);
set_item_property('dept.dname',visible,property_false);
set_item_property('dept.loc',visible,property_false);
Regards,
Monica

How to create the pricing procedure for domestic & import.

HI,
Pls any body let me know how to create the pricing procedure for domestic & import.
what is the use of the keys
step condiiton condition type from to manual required statistic subtotal requirement caltype basetype.
how system will work based on this.

Hi,
Please see below WIKI for your reference:
http://wiki.sdn.sap.com/wiki/display/ERPLO/16FieldsDescriptioninPricing+Procedure
Regards,
Ninad Kshirsagar

How to create the sub type field in hr abap infotype

hi ,
how to create the sub type field in hr abap infotype.
regards,
venkat.

Try like this also
creating of infotype please follow these steps ...
Step 1: Create Infotypes
i. Goto Transaction PM01 To create Infotypes:
ii. Enter the Infotype Number and say create all.
iii. The following message would display:
i. PSnnnn Does not exist. How do you want to proceed?
iv. Click
v. A maintain Structure screen appears.
Fill in the short text description and the PS structure of the Infotype.
Since the fields Personnel No, Employee Begin Date, End Date, Sequential Number,Date of Last Change, Name of user who changed the object are available in the PAKEY and PSHD1 structure, define the PSnnnn structure with only the fields you required.
vi. Once the PS Structure is created, save and activate the structure.
vii. In the initial screen of PM01, now click on .
Create a new entry for the infotype.
Fill in the values as mentioned below and save.
Infotype Characteristics:
Infotype Name of the infotype_ Short Text: __Short Description________
*General Attributes :
Time constraint = 1
Check Subtype Obligatory
Display and Selection:
Select w/ start = 3 Valid record for entered data
Select w/ end = 5 Records with valid dates within the period entered
Select w/o date = 6 Read all records
Screen header = 02 Header ID
Create w/o end = 1 Default value is 31.12.9999
Technical Data:
Single screen = 2000
List screen = 3000; List Entry Checked.
viii. In the initial screen of PM01, now click on .
Choose the infotype entry in the list.
Fill in the values as mentioned below and save.
Technical Attributes:
In tab section,
The following attribute values are given:
Applicant DB Tab = PAnnnn Infotype Name
Subtype field = SUBTY
Subtype table = T591A
Subty.text tab. = T591S
Time cnstr.tab. = T591A
Prim. /Sec. = I Infotype
Period/key date = I Interval
and .
ix. Infotype Screen Modification:
Edit Screen 2000 from PM01 for the Infotype.
ABAP Editor for the Infotype Program MPnnnn00 will be displayed.
Click . Flow Logic will be displayed. There string coding of your own logic.
Regards
Pavan

How to create the Business System both sender and receiver in SAP XI / PI

Dear All
kindly let me know how to create the Business System both sender and receiver in SAP XI / PI
Regards
Blue

Hi,
If by any chance you are not able to find these....
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
http://help.sap.com/saphelp_nw04s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/f1/92b248db68409487661ff13239127d/content.htm
Regds,
Pinangshuk.

How to create 'SAP BSP iView'?

All,
I am trying to to create a 'SAP BSP iView' in EP 7.0.
On creating the BSP Application iView in SAP Portal, I get the following error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Application URL 'http:///sap/bc/bsp/sap/BEAD_CRMB_BD/entrypoint.do' is not valid! Please check the protocol and host entries for system 'ABCDSystem'..
Application Namespace: sap (defaulted by portal)
Customer Namespace: sap (defaulted by portal)
Business Server Page (BSP) Application: BEAD_CRMB_BD
Application Parameters: crm_bsp_frame
Start Page: entrypoint.do
On deploying the Application in SE80, the application is displayed at the following url.
http://xxx:8001/sap(bD1lbiZjPTQ0MCZkPW1pbg==)/bc/bsp/sap/crm_bsp_frame/entrypoint.do?sap-client=440&appl=BEAD_CRMB_BD&version=1
Any thoughts as to why this iView is not working would be greatly appreciated.
SAP Partner

Umair,
As suggested I have made the following changes:
Application Namespace: sap (defaulted by portal)
Customer Namespace: sap (defaulted by portal)
Business Server Page (BSP) Application: crm_bsp_frame
Application Parameters:
Start Page: entrypoint.do
I have checked my system connection from portal to backend system and it works.
When I try to preview the iView, I get the following error.
- a pop up saying "Session management will not work, please check DSM log file for details"
Any thoughts....
SAP partner

HOW TO SEE THE JOB NUMBER IN DISPLAY MODE?

Hi all,
I am new to apo and how to see the job number in display mode?
i can see a couple of trns for create, delete and change and not to display it?
Can anyone tell me abt it?
Thanks
pooja

Hi Pooja,
I assume your query is on identifying job ID in display mode
To find out that, goto sm37, execute it and double click on
the job, and then click on job details, you will get the
job id (job number) in display mode
Regards
R. Senthil Mareeswaran.

How to create the Cash Flow step by step?

How to create the Cash Flow step by step?

Run S_ALR_87012271 (menu path A/C-FA-GL-Info System- GL Reports - BS/PL/Cashflow-general-cash flow)
In the screen enter the year & Company code, & execute. you will reach to another screen.
Click on the "FORM" & you will reach another screen having various forms. The form related to Cash flow is already highlighted.
Go to EDIT-General Data Selection - Change the financial statment version pertaining to your company
Then, click on each line item in the form which is being displayed and enter corresponding GLs.
Save it & execute S_ALR_87012271
Hope this solves your problem.

How to create the funtion module with step by step

friends can u help me regarding how to create the function module very urgent,
regards
bhavani

To create a function module, you first need to create a Function Group which will keep all the function module of same functionality.
To create a Function Group, go to SE80->Click on Workbench-Edit Object->Function Group Tab->Enter Function Group name-> Click Create.
To create a Function Module:
Go to T.Code SE37->Enter the Function name->Enter Function Group name n Short Des.-> Here you need to define Import, Export parameters with the condition. Also you can write your code in source code tab.
check this link
Converting seconds values
check the FM code. if you don't have this FM code, create it in SE37 and make use of it.
FM MONI_TIME_CONVERT
FUNCTION MONI_TIME_CONVERT.
""Lokale Schnittstelle:
*" IMPORTING
*" REFERENCE(LD_DURATION) TYPE SY-TABIX
*" EXPORTING
*" REFERENCE(LT_OUTPUT_DURATION) TYPE SWL_PM_CVH-DURATION
DATA: LD_HOUR(4) TYPE N. "
DATA: LD_MIN(4) TYPE N. "
DATA: LD_SEC(4) TYPE N. "
DATA: LD_VALUE2(2) TYPE N.
DATA: LD_VALUE3(3) TYPE N.
DATA: LD_VALUE4(4) TYPE N.
DATA: SAVE_DURATION LIKE SY-TABIX.
data: ld_minus(1).
SAVE_DURATION = LD_DURATION.
if ld_duration < 0.
save_duration = save_duration * ( -1 ).
ld_minus = true.
endif.
CLEAR LT_OUTPUT_DURATION.
IF SAVE_DURATION NE 0.
LD_HOUR = SAVE_DURATION DIV 3600.
save_duration = save_duration - ld_hour * 3600.
LD_MIN = SAVE_DURATION DIV 60.
save_duration = save_duration - ld_min * 60.
LD_SEC = SAVE_DURATION.
IF LD_HOUR LE 100.
LD_VALUE2 = LD_HOUR.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+3(2).
ELSEIF LD_HOUR LE 1000.
LD_VALUE3 = LD_HOUR.
WRITE LD_VALUE3 TO LT_OUTPUT_DURATION+2(3).
ELSE.
LD_VALUE4 = LD_HOUR.
WRITE LD_VALUE4 TO LT_OUTPUT_DURATION(4).
ENDIF.
WRITE ':' TO LT_OUTPUT_DURATION+5.
LD_VALUE2 = LD_MIN.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+6(2).
WRITE ':' TO LT_OUTPUT_DURATION+8.
LD_VALUE2 = LD_SEC.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+9(2).
LT_OUTPUT_DURATION = LT_OUTPUT_DURATION+1.
if ld_minus = true.
write '-' to lt_output_duration+1(1).
endif.
ELSE.
job running or aborted
ENDIF.
ENDFUNCTION.
Eg:2
Use the following procedure to create a function module
1.From the ABAP/4 Development Workbench screen, press the Function Library button on the Application toolbar.
2.Type the name of your function module in the Function Module field. The name must begin with Y_ or Z_.
3.Press the Create button. The Function Module Create: Administration screen is shown
4.Type the name of a function group in the Function Group field. The function group name must be four characters long and must begin with Y or Z.
5.Type an S in the Application field. This field is used to indicate which function area uses the function module. Our functionality is not used by any functional area, it is simply an example, so any choice will do. (S indicates that the function module contains functionality needed by Basis.)
6.Type a description of the function module in the Short Text field. The contents of this field are seen when displaying a list of function modules.
Press the Save button on the Application toolbar.
7.If the function group does not already exist, a pop-up informs you of that fact and asks you if you want to create it. Press the Yes button to create the function group. The Create Function Group dialog box appears. Type a description in the Short Text field and press the Save button. The Create Object Catalog Entry screen appears. Press the Local Object button. You are returned to the Function Module Change: Administration screen.
8.Press the Source Code button on the Application toolbar. The Function Module Edit screen is displayed.
9.Type the source code for your function module. Do not change the system-generated comment lines under any circumstances! Your function module might fail to operate if you do.
10.Press the Save button on the Application toolbar. The message Program xxxxx saved appears in the status bar at the bottom of the window.
11.Press the Back button on the Application toolbar. You are returned to the Function Library Initial screen.
12.If you want to define import or export parameters, select the Import/Export Parameter Interface radio button. Press the Change pushbutton. You are shown the Import/Export Parameters screen (refer to Figure 19.6). Type the names of your parameters in the first column and enter any other desired characteristics for each parameter. When you are finished, press the Save button and then the Back button.
13.Finally, to activate your function module, press the Activate button on the Application toolbar of the Function Library Initial Screen.
http://www.erpgenie.com/abap/bapi/example.htm

How to create the Portal Service in Portal 7.3,

Dear Experts,
how to create the Portal Service in Portal 7.3, as we create in Portal 7.0 by creating the Portal Project in that we create Portal Service and we can start and stop in Portal Service configuration in System Administration
Thanks,
Sagar Pande

Hi Sagar,
Procedure
1. Open the SAP NetWeaver Administrator by either of the following methods:
       a. Use the URL to your AS Java (hostname:port) to access the AS Java home page and use the link to SAP NetWeaver Administrator.
       b. Alternatively, add nwa to the AS Java URL to access SAP NetWeaver Administrator directly. (hostname:port/nwa).
2 Go to   Operations Management   Systems   and click the Start & Stop link.
    The Start & Stop: Java EE Instances window opens.
3 Click the Java EE Application bar and select the relevant application in the Application List.
    The Portal Services pane displays the services associated with the selected application.
4 Use the buttons Start Service or Stop Service.
Refer to Portal 7.3 help
http://help.sap.com/saphelp_nw73/helpdata/en/f6/ac978061ac4b24a87a1f821313c4fe/frameset.htm
Br,
Venky

How to Create the BSP t o display PDF Document

Similar Messages

Maybe you are looking for