How to Create the BSP for two languages(English & Arabic)

Hi ,
I got the requirement where i need to create the form for the Annuitant (Retriees) through they will inform their annuity department still they are surviving....so based upon the annuitant department run the annuity payslip for him.......
In that I should keep company information in the top and resprctive employee information like EMP ID and his contact address need to specify by default.....
For ex: Employee X is clicking this form..it should contain common information like company name and also employee's "X" respective information like his EMP ID and his contact address like wise the form should generate both common address and employee respective information.....both in Arabic and in english....
Is there any readymade BSP for this or if anybody have developed same kind of BSP pls send the code to [email protected]
How to do that.....ist very urgent.......
Help will be higly apppreciated.......
Thanks in Advance ,
Jasmine

Hi Jasmine,
I think you should try the SDN Search the next time before posting. You would have found this: [BSP/HowTo: Generate PDF Output from a BSP|https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1002]. Also crossposting the same question is a bad behaviour.
Best regards
Gregor

Similar Messages

How to create a BSP to display the form in TWo Languages( English & Arabic)

Hi ,
I got the requirement where i need to create the form for the Annuitant (Retriees) through they will inform their annuity department still they are surviving....so based upon the annuitant department run the annuity payslip for him.......
In that I should keep company information in the top and resprctive employee information like EMP ID and his contact address need to specify by default.....
For ex: Employee X is clicking this form..it should contain common information like company name and also employee's "X" respective information like his EMP ID and his contact address like wise the form should generate both common address and employee respective information.....both in Arabic and in english....
Is there any readymade BSP for this or if anybody have developed same kind of BSP pls send the code to [email protected]
How to do that.....ist very urgent.......
Help will be higly apppreciated.......
Thanks in Advance ,
Jasmine

Use a JFrame and paint on the content pane. Or a Frame with a Canvas (who the heck still uses AWT?).
They probably don't do anything because painting a button is not enough. It actually needs to be a button. Or Menu.

How to create the request for change of selection text into other language.

Hi,
In my object requirement is that when login through Japanese language, then on selection screen selection text should appear in Japanese language. For that I have maintained the text in Japanese language the program where we define the selection text there from translation I have maintained the text in Japanese but while maintain the text it didn't ask me for REQUEST, because of that I am not able to transport the changes to next system, so I want know how to create the request for this case.
Thanks

Hello Chetan,
You could goto the selection screen texts by goto-> selection texts,
Then you could again goto -> Translation
or
Other-> Translation(Not sure )
Then double click on the Program you should be able to see the Texts that need translation, now change something save and come back and try to activate, now it should propose for a new Transport Request.
Either create a new transaport request or give one that you have given for the program.
Hope the issue is resolved.

How to create a calendar for two years in GL

how to create a calendar for two years in GL

Hi,
- Login into Oracle EBS and select a responsiblity with GL Superuser drants (e.g. General Ledger Super User)
- Navigate to Setup + Financials + Calendars and open the GUI Accounting (Navigation for R12)
- Query the used calendard (used from jour Set of Books/ Ledger via the GUI
- Enter for each Period (= Period Type 13, 16, 18,...) one Record, have a look to the existing data, used the same logic.
In the GUI, defined the calendar for 2 Years
Dirk

How to create the BOM for co product

Dear friends,
How to create the BOM for Co product and How the production will create and how the costing will capture for that.
Regards,
Sabhapathy R

Dear Umesh,
How Bom created for co product
By product
Header
xxx
101
mvt
mvt
qty
item
yyy
261
1
zzz
531
0.5-
By product
Same way how we create co product for BOM. pl explain with simple example.
Thanks &regards,
Sabhapathy R

How to creat the Varient for 1099MISC With Holding Tax

How to create the Variant for 1099MISC With Holding Tax ?

HI,
please follow the below steps to create variant at report.
tcode se38
report RFIDYYWT
pass all the parameters
press save icon
give variant name
retrive the variant in report
tcode se38
report name RFIDYYWT
press : shift + F5
or get varinat icon.
I hope above will resolve your issue.
Regards
Madhu M

How to creat the infopackage for RDA?

Hi all;
How to creat the infopackage for RDA?

Hi,
Check in
Real time infopackage
Re: Types od DTP and their uses in BI 7.0
Re: Real-Time Data Acquisition
Thanks
Reddy

How to create the BSP to display the document in two lang(English & Arabic)

Hi ,
I got the requirement where i need to create the form for the Annuitant (Retriees) through they will inform their annuity department still they are surviving....so based upon that,Annuitant department run the annuity payslip for him.......
In that I should keep company information in the top and resprctive employee information like EMP ID and his contact address need to specify by default.....
For ex: Employee X is clicking this form..it should contain common information like company name and also employee's "X" respective information like his EMP ID and his contact address like wise the form should generate both common address and employee respective information.....both in Arabic and in english....
Is there any readymade BSP for this or if anybody have developed same kind of BSP pls send the code to [email protected]
How to do that.....ist very urgent.......
Help will be higly apppreciated.......
Thanks in Advance ,
Jasmine

Hi ,
You can use BSP Application HAP_DOCUMENT for creating/modifying appraisal forms.
use the page document_todo.htm
Create a BSP Iview for documnet_todo.htm in the Portal...

How to Create the BSP t o display PDF Document

Hi Experts,
I need to create the document for the Annuitant (Retriees) through they will inform their annuity department still they are surviving....so based upon that,Annuitant department run the annuity payslip for him.......
If they died they will go for final settlement...so this is the business requirement for this document...
In that documnet, It holds common information like company information in the top and respective employee information like EMP ID and his contact address in the down......
For ex: If Employee "X" is Login into portal .That document should contain common information like company name and employee's "X" information like his EMP ID and his contact address .Like wise the form should generate both common address and employee respective information.....both in Arabic and in English....
Is there any readymade BSP or Iview for this (or) if anybody have developed same kind of BSP or somehow related to his scenario, pls send the code to [email protected]
How to do that.....its very urgent.......
Help will be higly apppreciated.......
Thanks in Advance ,
Jasmine

Hi Jasmine,
I think you should try the SDN Search the next time before posting. You would have found this: [BSP/HowTo: Generate PDF Output from a BSP|https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1002]. Also crossposting the same question is a bad behaviour.
Best regards
Gregor

How to create one delivery for two sales orders?

Hi Experts,
I need to create one delivery for two sales orders. But it fails.
The route, shipping point, ship to party are same for both orders but INCOTERMS are different.
Delivery date, Good issue date, loading date,material availability date, transportation planning date for 1st order is 12/07/11 and for second order is 14/07/11.
I have created delivery on 14/07/2011 but the delivery is created for 1st order only, the second order is missing in the delivery.
It not happened because of incorterms.? different dates
Kindly help regarding this.
Thanks
Raghu

Hi
To understand splitting behavior, see SAP Note 546668 - FAQ: Delivery split when creating deliveries. And yes, incoterms happens.
I think that with the help of question 6 you can try to force the merging of SO. Then, see SAP Note 166397 - Delivery split according to customer field ZUKRL, and handling the field ZUKRL in a VOFM in the copy rule I think that you can try to do it.
Finally See Note 4505 - Duprec when adding delivery (VL04, VL01, VL10*) to avoid problems while you are merging.
Regards
Eduardo

How to create the subtitle for video

I have been working on the editing and was wondering how to make the subtitles into it? Can some one recommend a easy software to use? Thank you.

Dear Umesh,
How Bom created for co product
By product
Header
xxx
101
mvt
mvt
qty
item
yyy
261
1
zzz
531
0.5-
By product
Same way how we create co product for BOM. pl explain with simple example.
Thanks &regards,
Sabhapathy R

How to create the recovery for windows 8

Hello,
I have windows 8 in my T430....I just wanted to know the detailed procedure for creating the recovery for it...
Thanks
Harsh
Solved!
Go to Solution.

Methodology to create Recovery Media and reload a Lenovo system with Microsoft Windows 8 preload
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How to create one form for two Udo object

Hy ,
I have two Object Udo (header and line)
How we created a form to manage these two files (UDO)
Thanks

Thank you janos
it works, I put the code to other developers for information
     Shared Sub SBO_Application_ItemEvent(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean) Handles SBO_application.ItemEvent
            If ((FormUID = "SIR001_") And (pVal.ItemUID = "add") And (pVal.EventType = SAPbouiCOM.BoEventTypes.et_CLICK) And (pVal.Before_Action = False)) Then
                Dim oDS As SAPbouiCOM.DBDataSource
                oDS = SBO_application.Forms.Item(FormUID).DataSources.DBDataSources.Item("@SIR_LOTL")
                oDS.InsertRecord(oDS.Size)
                oDS.Offset = oDS.Size - 1
                oform = SBO_application.Forms.Item(FormUID)
                oMatrix = oform.Items.Item("mtx_0").Specific
                oMatrix.AddRow(1)
            End If
            If ((FormUID = "SIR001_") And (pVal.ItemUID = "del") And (pVal.EventType = SAPbouiCOM.BoEventTypes.et_CLICK) And (pVal.Before_Action = False)) Then
                oform = SBO_application.Forms.Item(FormUID)
                oMatrix = oform.Items.Item("mtx_0").Specific
                For index As Integer = oMatrix.RowCount To 1 Step -1
                    If oMatrix.IsRowSelected(index) = True Then
                        oMatrix.DeleteRow(index)
                        oform.Mode = SAPbouiCOM.BoFormMode.fm_UPDATE_MODE
                    End If
                Next
            End If
        End Sub

How to create the layout for query in Bex 3.5

Hi All,
i have one requirement to do layout for query. Report like after passing the variable values and then they will select the required layout. It has to get output according layout selection fields.
i have no idea about how to create layout.
thanks in advance...
Thanks & Regards,
Mallikarjuna.k

Hi Gregor,
In the note 1149346 that you have mentioned, it says -
You must start the input-ready query in change mode.
BEx Analyzer: In the properties of the analysis grid, the switch
"Suppress new rows" must not be set. Furthermore,
the switch "Allow entry of plant values"
must be set in the local query properties.
I have not seen this setting Allow entry of plant values in a query - can you tell what is refers to?

How to create the reation between two tables without creating relation

Hi,
I have three tables.( A,B and C)
I created relation between A,B and A,C.
I want to create the relation between B,C without using realtion in oracle forms.
Please do the needful.

ok, now i understand your problem. It is a case of one-many-many relation between three blocks.
In this situation what i personally follow that - save records in between when it ask for a commit. And i shall advice you to follow that only. This is the safe and easy method.
Otherwise,
1> make your third block a non-database block.
2> When finish entering/modifying each data set related to 2nd block - insert/update/delete the data grammatically into a temporary table. and after that clear the 3rd block.
3> you need to reload the record in 3rd block from the temporary table when you move to a record of 2nd block that has already been entered.
4> now when you finally commit your form the insert/update/delete record from the temporary table into the final 3rd table.
Now follow which ever steps is suitable for you.
Regards,
Tarun

How to Create the BSP for two languages(English & Arabic)

Similar Messages

Maybe you are looking for