How to Create the Container

Hi All,
I know the 3 type of Container.
1. Abstract Interface
2. Simple XSD Data Type and
3. Receiver.
Here My dought is Which secnarios we have to create this 3 containers...
Please give me Clear idea .. It's usefull to me whenever i am doing BPM...
Regards
SReddy

Hi Reddy,
1.Abstract Interface
Whenever you need to pass some iformation to and from your BPM< you have to go for a ABSTRACT INTERFACE. There is no outbound or inbound for your ABSTRACT INTERFACE.
So, consider a case when you want to pick up a file, do a transformation and then send another file as the output.
In this case, you will have one Outbound Interface that is Simple to enable the file to be picked up. One inbound interface on the reciver side so that the output file can be passed to the receiver system and finally, you will have 2 abstract interfaces. one for the sender side to receiver the file and another for the receiver side to pass the file to the receiver system.
To sum it all up, ABSTRACT INTERFACE are the means by which you can interact with your BPM.
For info on this , check this link,
http://help.sap.com/saphelp_nw04/helpdata/en/55/c5633c3a892251e10000000a114084/content.htm
2. Simple XSD datatype
This is used as a variable within your BPM.
Regards,
Bhavesh
Message was edited by: Bhavesh Kantilal

Similar Messages

How to create a container class for 2 object?

I use JDK to create 2 objects, one is Customer and one is Book. I need to enqueue these 2 objects, but they canot share the same queue class. Some one told me that I can create a container class for these 2 objects but I don't know how to create it. Can some one tell me how to create the container class?

I use JDK to create 2 objects, one is Customer and one
is Book. I need to enqueue these 2 objects, but they
canot share the same queue class. Some one told me
that I can create a container class for these 2
objects but I don't know how to create it. Can some
one tell me how to create the container class?
class CustomerBook{
Book m_book;
Customer m_customer;
pulbic CustomerBook (Customer customer, Book book){
m_book = book;
m_customer = customer;
}If you want to create a class that represents one customer and many books, do this:
class CustomerBooks{
Vector m_books;
Customer m_customer;
pulbic CustomerBook (Customer customer){
m_books = new Vector();
m_customer = customer;
public void addBook (Book book){
m_books.addElement (book);
public void displayBooks (){
//I assume the Book class has a toString method or something similar
for (int i = 0;i < m_books.size();i++){
System.out.println ("book: "+((Book)m_books.elementAt(i)).toString());

How to create the web template

Hi BW Experts,
how to create the web template.....!
I just want to know what is the use of Web template. i want to display the report
in WEB-UI screen ( sap-crm 7.0 portal ) can any one help me please how to proceed ...!
Thanks
shahina..!

Hiu2026
Steps to follow to create WAD in WEB Template in 3.5 or 7.0 u2026u2026..
Go to All programs and select your web application designer
Select the button to create a new page in WAD
Select the chart and place in the layout
Next goto Data provider Target and select your query
Give your report name in the given data provider screen
Select your query in History/find/Favourites/Infoareas button
Select your query in this screen and click OPEN
Now we can see the data provider is assigned to the chart.
To edit the chart you have to right click on the chart
After right click on it we will find another screen where we can edit all the settings
In this screen we can find NEXT click button to change our settings
In this screen we can state the tasks (Title, units, values, range)
In this screen we can change our background /validity/color
In this screen we can add values to the chart
In this screen we can add validity/positions/order/axis types to the chart
In this screen we can change the global settings/and overview of the chart.
This screen shows that we have customized the chart successfully
After successful creation of the chart we have to save the chart
Save your chart in your favorites by giving the description and technical name in the given block.
Now execute your WAD by selecting the execute button
The BEx Web Application Designer is a desktop application for creating Web applications with BW-specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps. This HTML page (Web application) provides the basis for not only Web applications with complex interaction, but also for Web cockpits and iViews.
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
Web Application Designer for Beginners
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
Web Application Solutions: A Designer's Guide
http://www.lukew.com/resources/webapplicationsolutions.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/bw-web-application-designer-1955944
Feautures of WAD in 7.0
http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6

How to create the relationship between ESSBASE 11 and DM in OBIEE11

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok.
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

How to create the relationship between ESSBASE 11 and DM in OBIEE 11G?

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

How to create the SWF file which was included surrogate pairs.

I would like to make sure how to create the SWF file which are included surrogate pairs.
The error of outside the scope of unicode occurred when I compiled(mxmlc) the as file which was set surrogate pairs to 'Unicoderange'.
Ex, I set the ' '(UTF-16 is '20B9F') to 'Unicoderange'.
However, I cannot add the surrogate pairs.
The error of outside the scope of Unicode occurred when I compiled the AS file.
The reason of error was that the Unicode(UTF-16) of surrogate pairs is invalid.
Then, I read the following pages.
These pages are written that unicode-range supported surrogate pairs.
http://livedocs.adobe.com/flex/3/html/help.html?content=fonts_07.html
http://www.w3.org/TR/1998/REC-CSS2-19980512/fonts.html#descdef-unicode -range
So please let me know how to create the SWF file which are included surrogate pairs.
Environment
- Flex3.5a
- TTC: meiryo(ver6.02), msgothic(ver2.50), mspgothic(ver2.50)
Thanks,
Takeshi Ishihara.

I've been able to create project jar files in Eclipse by selecting Export from the File menu, then choose Java - Jar file - and provide the required information, name, destination folder etc. But when I do this, I do not export other jars on the build path this way nor do I expect to do this. I am only concerned with creating a jar file of my own work. A jar file does not "contain" other jar files. If the jar file contains the main method, and requires other jars for it's execution, then you may wish to include a reference to required jars on the class path entry of the Manifest file of the jar file you create. I'm not sure how to create a Manifest file in eclipse though..

How to create a container in se51

hi,
i have two doubts
1. how to create a container in se51.
2. For eg: while calling a function i click on pattern which and give the function module name it will give the function module with the exporting and the importing parameter.
My question is how to create an object.

Hello Preethi,
First in the code:
DATA container TYPE REF TO cl_gui_custom_container.
create the custom container
CREATE OBJECT container
EXPORTING container_name = 'CUSTOM'.
Second in graphical screen painter you must build an custom control with same name: 'CUSTOM'
An example of this is the program: RSDEMO_CUSTOM_CONTROL
Regards.

How to create the above Fiscal period & Client Calender

Hi All,
I want to create Client Factory Calendar in BI System.
Source is MS SQL DB(UD Connect) not ECC.
I got the below information from the Business Group:
For the moment we need to implement the Client Calendar. So periods should be according to Client Fiscal Periods. We do not need to implement public holidays, as they donu2019t affect periods.
Client periods always contain complete weeks, starting Monday, finishing Sunday. Periods contain the following number of weeks: 5-4-4-5-4-4-5-4-4-5-4-4.
Please calsri fy the below:
>> Holiday calender is not required. but w/o holiday calender how we can define Factory calendor? Is it possible?
>> How to define the fisacl periods?.
>> When can we use these fiscal periods in the Factory Calender?.
Please provide me step wise procedures..how to create the above Fiscal periods & Client Calender.
Thanks in advance,
Sri.

hi siri.
please go though these links
calendar
difference b/n Factory Calendar and Public Holiday Calendar
hope this will help u.
thanks

How to create a container element in workflow container

Hi,
I am learning WF by a Tutorial. In which absence of notification was considered as example. As per tutorial, I created two task for creating a Notification and checking a absence
In the next step it ask to create a container element(approver) to workflow container. How i can create the same.
Also, please clarify me on the binding between task container and workflow container....with this example
Thanks
Suresh

Hi,
On the workflow builder LEFT side below the navigation area u can see this <Double-Click to Create>.
Double click and create the container.
During binding it looks as follows.
Workflow -
> Task
Workflow <----
Task
What happen here is from workflow the data passed to task and it is used for processing, after that it returned back to the workflow. Now u can create the container on bothside and bind the data. ie Variables.
Creating container u can refer : http://www.****************
Reward for useful answer.
Richard A

How to create a container?

I have installed Designer 6i r4.1.1
I can create workarea, but I don'know and don't find how to create a container.
Please expand me how to do it?
Thanks.

Hi,
Just go to Repository Object Navigator from the Designer front panel.
Right-click on the Workarea in the navigator. Select create child from the menu and select Application system from the
list that appears.
HTH
Ritu

How to create a container element?

Hi,
Could somebody please tell me how to create a container element and how to create a multi container element? How is this element used in the fork step?
I am using a fork with 3 branches but the agent assignment is a problem.The workitem does not go to the user set in the agents tab.
Regards,
Monica.

Hi Monica,
Within your Workflow Builder, there is a box on the left hand side that (Workflow Container). You should have an option (in change mode) to right-click and create or double-click on the <Double-Click to create> tab.
Or you can go to the Workflow Container "Goto -> Workflow Container" and click on the "Create" <F5> icon.
Same theory applies to creating a container element in your task. Go to your task and click on the "Container" button and select "Create".
When creating your container, you can specify if it is a multiline container by checking "Multiline" under the container attributes.
In a fork step, you would really only use your "Container Element" in the "End Condition" of a Fork step.
Please advise what the "Agent Assignment" is referring to when you're using it in your fork? Which step in the fork?
If you are assigning agents in one step of the fork, you cannot expect these agents to apply to your other 2 fork steps. The forks work independently of each other (to a point).
Please provide more information if you need more help.
Kind regards,
Tom

How to create the funtion module with step by step

friends can u help me regarding how to create the function module very urgent,
regards
bhavani

To create a function module, you first need to create a Function Group which will keep all the function module of same functionality.
To create a Function Group, go to SE80->Click on Workbench-Edit Object->Function Group Tab->Enter Function Group name-> Click Create.
To create a Function Module:
Go to T.Code SE37->Enter the Function name->Enter Function Group name n Short Des.-> Here you need to define Import, Export parameters with the condition. Also you can write your code in source code tab.
check this link
Converting seconds values
check the FM code. if you don't have this FM code, create it in SE37 and make use of it.
FM MONI_TIME_CONVERT
FUNCTION MONI_TIME_CONVERT.
""Lokale Schnittstelle:
*" IMPORTING
*" REFERENCE(LD_DURATION) TYPE SY-TABIX
*" EXPORTING
*" REFERENCE(LT_OUTPUT_DURATION) TYPE SWL_PM_CVH-DURATION
DATA: LD_HOUR(4) TYPE N. "
DATA: LD_MIN(4) TYPE N. "
DATA: LD_SEC(4) TYPE N. "
DATA: LD_VALUE2(2) TYPE N.
DATA: LD_VALUE3(3) TYPE N.
DATA: LD_VALUE4(4) TYPE N.
DATA: SAVE_DURATION LIKE SY-TABIX.
data: ld_minus(1).
SAVE_DURATION = LD_DURATION.
if ld_duration < 0.
save_duration = save_duration * ( -1 ).
ld_minus = true.
endif.
CLEAR LT_OUTPUT_DURATION.
IF SAVE_DURATION NE 0.
LD_HOUR = SAVE_DURATION DIV 3600.
save_duration = save_duration - ld_hour * 3600.
LD_MIN = SAVE_DURATION DIV 60.
save_duration = save_duration - ld_min * 60.
LD_SEC = SAVE_DURATION.
IF LD_HOUR LE 100.
LD_VALUE2 = LD_HOUR.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+3(2).
ELSEIF LD_HOUR LE 1000.
LD_VALUE3 = LD_HOUR.
WRITE LD_VALUE3 TO LT_OUTPUT_DURATION+2(3).
ELSE.
LD_VALUE4 = LD_HOUR.
WRITE LD_VALUE4 TO LT_OUTPUT_DURATION(4).
ENDIF.
WRITE ':' TO LT_OUTPUT_DURATION+5.
LD_VALUE2 = LD_MIN.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+6(2).
WRITE ':' TO LT_OUTPUT_DURATION+8.
LD_VALUE2 = LD_SEC.
WRITE LD_VALUE2 TO LT_OUTPUT_DURATION+9(2).
LT_OUTPUT_DURATION = LT_OUTPUT_DURATION+1.
if ld_minus = true.
write '-' to lt_output_duration+1(1).
endif.
ELSE.
job running or aborted
ENDIF.
ENDFUNCTION.
Eg:2
Use the following procedure to create a function module
1.From the ABAP/4 Development Workbench screen, press the Function Library button on the Application toolbar.
2.Type the name of your function module in the Function Module field. The name must begin with Y_ or Z_.
3.Press the Create button. The Function Module Create: Administration screen is shown
4.Type the name of a function group in the Function Group field. The function group name must be four characters long and must begin with Y or Z.
5.Type an S in the Application field. This field is used to indicate which function area uses the function module. Our functionality is not used by any functional area, it is simply an example, so any choice will do. (S indicates that the function module contains functionality needed by Basis.)
6.Type a description of the function module in the Short Text field. The contents of this field are seen when displaying a list of function modules.
Press the Save button on the Application toolbar.
7.If the function group does not already exist, a pop-up informs you of that fact and asks you if you want to create it. Press the Yes button to create the function group. The Create Function Group dialog box appears. Type a description in the Short Text field and press the Save button. The Create Object Catalog Entry screen appears. Press the Local Object button. You are returned to the Function Module Change: Administration screen.
8.Press the Source Code button on the Application toolbar. The Function Module Edit screen is displayed.
9.Type the source code for your function module. Do not change the system-generated comment lines under any circumstances! Your function module might fail to operate if you do.
10.Press the Save button on the Application toolbar. The message Program xxxxx saved appears in the status bar at the bottom of the window.
11.Press the Back button on the Application toolbar. You are returned to the Function Library Initial screen.
12.If you want to define import or export parameters, select the Import/Export Parameter Interface radio button. Press the Change pushbutton. You are shown the Import/Export Parameters screen (refer to Figure 19.6). Type the names of your parameters in the first column and enter any other desired characteristics for each parameter. When you are finished, press the Save button and then the Back button.
13.Finally, to activate your function module, press the Activate button on the Application toolbar of the Function Library Initial Screen.
http://www.erpgenie.com/abap/bapi/example.htm

How to create workflow container element from workflow builder?

How to create workflow container element from workflow builder?

in workflow
three are five container, for each container we have define according to requirement of that particular container.
1. event container
2. workflow container
3. task container
4. method container
5. rule container
1. event container
in evernt contianer we have to create elements in BOR where we create event in parameters
2. workflow container
in workflow container we have to create elements in workflow builder itself. in left side of the screen we see <double click to create element>
3. task container
in task container we have to create in task itself it has a tab called container elements
4. method container
in method container we have to create in BOR. it is created in parameter of that BOR.
5. rule container
in rule container we have to create in PFAC transaction

Class for creating the container in web dympro like include INCLUDE OBJECT

Hi how can we use the macros swc_container. swc_set*** .. etc in webdynpro . ??
I have to pass some vaules to the event container .
As we cant user includes in webdynpro is there a class to carry out the same task .
i.e;Class for creating the container in web dympro like include INCLUDE <OBJECT> or INCLUDE <cntn01>.
Thanks ,
naval Bhatt

Hi,
You had the same question in worfklow forum. I suggest you to include your non-OO-compliant code to for example a function module. OR even better, you might want to take a look to function modules SAP_WAPI*. There are plenty of standard functions, which you can use to do the same things as the macros you are now trying to use. For example raising workflow events, etc.
Regards,
Karri

How was created the cluster with keys in example: Sim Phone.vi

Hello all
I have LV 7.1.1
I have found the example: Sim Phone.vi
And I don't know how was created the cluster with keys?
Best regards
Iskander

It's just like any other cluster you create. Put a cluster container on the front panel and insert some Booleans. the actual Booleans are on the classic controls palette. The border of the cluster is also colored transparent with the paintbrush on the Tools palette.

How to Create the Container

Similar Messages

Maybe you are looking for