How to create the selectable-resizable-movable transparent rectangle box?

Hai,
I want to create selectable-resizable-movable Transparent Rectangle box.This rectangular box may be moved and/or resized by putting the mouse pointer on a side or corner of the rectangle box.
This is for cropping the image where rhe rectangle is selected. Please help how to write the code.
Thanks in advance
Regards,
Saravanan.K

Unless you're doing something special here (I'm not too sure what you mean by 'may not cover the background image'), I don't think you need an 'effect'.
Try this:
private Rectangle createSelectWindow(final Color color, double length) {
        Rectangle rect = new Rectangle(length, length);
        rect.setFill(Color.RED);
        rect.setStroke(Color.RED);
        rect.setOpacity(0.5);  // i.e. make it 50% visible
        rect.setCursor(Cursor.HAND);
        return rect;
}Or, if you don't want the border to be translucent and just the fill, try this:
private Rectangle createSelectWindow(final Color color, double length) {
        Rectangle rect = new Rectangle(length, length);
        rect.setFill(new Color(1, 0, 0, 0.5));  // rgba - use an alpha of 0.5 on the fill color
        rect.setStroke(Color.RED);
        rect.setCursor(Cursor.HAND);
        rootPane.getChildren().add(rect);
}

Similar Messages

  • How to create the select option in the screen

    HI,
    I am developing one module pool program and I have below requirement,
    currently plant is acting like PARAMETER and the now it should be changed to select option.
    how to create the select option in the screen
    Thanks and regarding,
    Malla
    Moderator message - Please search before asking - post locked
    Edited by: Rob Burbank on Dec 16, 2009 1:41 PM

    Try RANGES.
    The RANGES has same structure as that of select-options.

  • How to create the select option for the Plant in screen (Module pool)

    HI,
    I am developing one module pool program and I have below requirement,
    currently plant is acting like PARAMETER and the now it should be changed to select option.
    how to create the select option in the screen
    Thanks and regarding,
    Malla
    Moderator message - Cross post locked
    Edited by: Rob Burbank on Dec 16, 2009 1:41 PM

    Steps to get SELECT-OPTIONS in module pool programs.
    1.Start one dialog program with SAPMZ_001.
    Place the below code in the TOP include of the dialog program.
    TABLES marc.
    SELECTION-SCREEN BEGIN OF SCREEN 3200 AS SUBSCREEN.
    SELECT-OPTIONS: werks FOR marc-werks.
    SELECTION-SCREEN END OF SCREEN 3200. 
    2 .Create one screen 3000.
    Go to Layout of the screen and Define subscreen area on the screen and Name it as l_subscreen.
    Place the below code in the Flow logic of the screen.
    PROCESS BEFORE OUTPUT.
      CALL SUBSCREEN l_subscreen INCLUDING 'SAPMZ_001' '3200'.
    PROCESS AFTER INPUT.
      CALL SUBSCREEN l_subscreen.
    Activate all.
    Create Transaction code for the dialog program .
    Execute the transaction code. You will see the select-option for werks how we see on Selection-screen.

  • How to create the selection screen dynamically

    Hi,
    I have a requirement to create the selection screen Dynamically. All the fields that should appear on the selection screen will be available in a custom table. So, based on the entries available in the Z tables, the selection screen should be built. Eg. If there are 10 records available in the Z table, the selection screen should consist of 10 fields. If there are 100 entries, the Selection screen should contain 100 fields. and the logic to build this selection screen should be carried out dynamically in the program.
    Could anyone of you please share the valuable inputs on this. If anyone has the sample code to do this, please share.
    Thanks in advance.
    Regards,
    Paddu.

    Hi,
    Kindly go through this sample program below:
    DEMO_LIST_FORMAT_INPUT *and
    check this function module:
    FREE_SELECTIONS_DIALOG *.
    Hope it helps
    Regards
    Mansi

  • How do you create the 'cream pop-up info text boxes' that appear when you hover mouse over?

    Hi people,
    I really need to know how you create the 'cream pop-up info text boxes' that appear when you hover your mouse over an object on a webpage (and often in any program e.g. Photoshop) for more than a second. I need to know because the logo on my website is the navigation tool used to return to the homepage. It is always found in the top left so the user can always click it to return.
    The only problem is im the only one who knows that when you click my logo, you return to the homepage. I need one of these 'cream info boxes' (forgive my lack of knowledge) to appear so the user will figure it out.
    Thanks for taking the time to read my question...

    Using your code it should look like this where title attribute is in red:
    <div id="apDiv2"><a href="index.html"><img src="divs_dw/jtgd_logo_trans.png" alt="jtgd_logo" title="your description goes here" width="176" height="163" /></a></div>
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb

  • How to create the request for change of selection text into other language.

    Hi,
    In my object requirement is that when login through Japanese language,  then on selection screen selection text should appear in Japanese language. For that I have maintained the text in Japanese language the program where we define the selection text there from translation I have maintained the text in Japanese but while maintain the text it didn't ask me for REQUEST, because of that I am not able to transport the changes to next system, so I want know how to create the request for this case.
    Thanks

    Hello Chetan,
    You could goto the selection screen texts by goto-> selection texts,
    Then you could again goto -> Translation
    or
    Other-> Translation(Not sure )
    Then double click on the Program you should be able to see the Texts that need translation, now change something save and come back and try to activate, now it should propose for a new Transport Request.
    Either create a new transaport request or give one that you have given for the program.
    Hope the issue is resolved.

  • How to create the logical file name

    Hi All,
        I have requirement where i need to post the Inventory Management data. for this i need to execute std. program RM07MMBL which is having logical file name in the selection screen. but i have placed my input file in application server.
       Can any one tell how to create the Logical filename which refers the physical path. I also tried <b>t-code SF01 & Table - FILENAMEC</b>I and found that we need to add an entry in this table but i really dont know how we have to do since this table cannot be maintained in SM30 also..
      Help Me.
      Thanks in Advance!...
    Regards,
    Ramkumar

    Hi Ram,
    Try using FILE transaction code...
    Follow these steps to create:::
    Double click on Logical file Path Definition
    Click on New Entries,
    Give Logical file Path name as Z_LOGICAL PATH and save it
    now choose this path and double click on Assignemt of Physical path to Logical path
    double click on the OS name
    Give some description and give some Physical path name from AL11 transaction and save it
    Now Double click on Logical File Name Definition,
    Click on New Entries,
    Give some logical file name: Z_LOGICAL_FILENAME
    Physical file: test
    Data Format: BIN
    Logical Path: Z_LOGICAL PATH
    Hope this helps
    Regards,
    Phani
    Message was edited by:
            Sivapuram Phani Kumar

  • How to create the web template

    Hi BW Experts,
       how to create the web template.....!
       I just want to know what is the use of Web template. i want to display the report
    in WEB-UI screen ( sap-crm 7.0 portal ) can any one help me please how to proceed ...!
    Thanks
    shahina..!

    Hiu2026
    Steps to follow to create WAD in WEB Template in 3.5 or 7.0 u2026u2026..
    Go to All programs and select your web application designer
    Select the button to create a new page in WAD
    Select the chart and place in the layout
    Next goto Data provider Target and select your query
    Give your report name in the given data provider screen
    Select your query in History/find/Favourites/Infoareas button
    Select your query in this screen and click OPEN
    Now we can see the data provider is assigned to the chart.
    To edit the chart you have to right click on the chart
    After right click on it we will find another screen where we can edit all the settings
    In this screen we can find NEXT click button to change our settings
    In this screen we can state the tasks (Title, units, values, range)
    In this screen we can change our background /validity/color
    In this screen we can add values to the chart
    In this screen we can add validity/positions/order/axis types to the chart
    In this screen we can change the global settings/and overview of the chart.
    This screen shows that we have customized the chart successfully
    After successful creation of the chart we have to save the chart
    Save your chart in your favorites by giving the description and technical name in the given block.
    Now execute your WAD by selecting the execute button
    The BEx Web Application Designer is a desktop application for creating Web applications with BW-specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps. This HTML page (Web application) provides the basis for not only Web applications with complex interaction, but also for Web cockpits and iViews.
    http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
    Web Application Designer for Beginners
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
    Web Application Solutions: A Designer's Guide
    http://www.lukew.com/resources/webapplicationsolutions.pdf
    http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/bw-web-application-designer-1955944
    Feautures of WAD in 7.0
    http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6

  • How to create the custom infotypes in Campus Management

    Hi,
    Please help me how to create the custom infotypes in campus management.
    Thanks,
    Lakshmi.

    Hi,
    Steps to create a HR Infotype:
    1) Go to Transaction PM01.
    2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
    3) Select the 'Employee Infotype' radio button.
    4) Select the 'PS Structure Infotype'.
    5) Click on Create... A separate table maintenance window appears...
    6) Create a PS structure with all the fields you want on the Infotype
    7) Save and Activate the PS structure
    8) Go back to the initial screen of PM01.
    9) Click on 'All' push button. It takes a few moments.
    10) Click on 'Technical Characteristics'. Infotype list screen appears
    11) Click on 'Change'(pencil) button
    12) Select your Infotype and click on 'Detail' (magnifying glass) button
    13) Give 'T591A' as subtype table
    14) Give 'T591S' as subtype txt tab
    15) Give your subtype field as subtype field
    16) Save and come back to PM01 initial screen
    17) Click on 'Infotype Characteristics' ... Infotype list screen appears
    18) Click on 'Change' (pencil) button
    19) Click on 'New Entries'
    20) Enter your Infotype number and short text
    21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
    22) Save your entries.
    23) Now the Infotype is created and ready to use.
    24) If you want to change the layout of the Infotype as per your requirement...
    25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
    26) In the next screen.. Select 'Layout Editor' and click 'Change'.
    27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
    28) Save and activate. (Don't forget to 'Activate at every level)
    Subtype Creation :
    Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
    Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
    Subty.text tab is T591S and time const tab is T591A.
    See:
    http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
    HR related site:
    http://www.sapdevelopment.co.uk/hr/hrhome.htm
    Enhancement of Infotype
    Check the following
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
    Infotype Enhancement overview screen
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
    Cheers,
    vasavi.
    kindly reward if helpful.

  • How to create the relationship between ESSBASE 11 and DM in OBIEE11

    Hi Experts,
    I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
    But another data source is essbase and based on this source, I create all reports.
    In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
    So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
    I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
    When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
    However, when I remove the column 'Open Date'. it will be ok.
    So what I missing the steps? Please help me. Thanks.

    >
    '2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
    If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
    I think it does not work.Right?Hi,
    I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
    I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
    So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
    When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
    Hope I was clear, and this helps.
    Thank you,
    Dhar

  • How to create the relationship between ESSBASE 11 and DM  in OBIEE 11G?

    Hi Experts,
    I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
    But another data source is essbase and based on this source, I create all reports.
    In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
    So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
    I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
    When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
    However, when I remove the column 'Open Date'. it will be ok
    So what I missing the steps? Please help me. Thanks.

    >
    '2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
    If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
    I think it does not work.Right?Hi,
    I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
    I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
    So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
    When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
    Hope I was clear, and this helps.
    Thank you,
    Dhar

  • How to use the selection profile and status profile for production order?

    Hi expert,
       I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
      Please help me.
      thanks in advance.
      george.shi

    Hi George,
    There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
    We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
    In this status profile,
    1.We define the sequence in which user statuses can be activated,
    2.We define initial statuses
    3. Allow or prohibit certain business transactions.
    Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
    Regards,
    Raja.
    Edited by: Rajarao on Oct 30, 2008 6:21 AM
    Edited by: Rajarao on Oct 30, 2008 6:22 AM

  • How to create the sales order using BAPI's ....?

    Hi Guru's,
    could you please provide how to create the sales order using BAPI's .....i need step by step process and please provide the details from scratch....basically  i don't have basic knowledge on this....please provide required inputs ....:)
    thanks in advance
    Srinivas......

    Hi Guru's thanks for your inouts and your valuble time...
    please find the program logic below...
    *& Report  ZAREPAS30
    REPORT  zarepas30.
    DATA : gs_vbeln                   TYPE  vbak-vbeln,
           gs_order_header_in         TYPE  bapisdhd1,
           gs_order_header_inx        TYPE  bapisdhd1x,
           gt_order_items_in          TYPE  STANDARD TABLE OF bapisditm,
           gwa_itab1                  TYPE  bapisditm,
           gt_order_items_inx         TYPE  STANDARD TABLE OF bapisditmx,
           gwa_itab2                  TYPE  bapisditmx,
           gt_order_partners          TYPE  STANDARD TABLE OF bapiparnr,
           gwa_itab3                  TYPE  bapiparnr,
           gt_return                  TYPE  STANDARD TABLE OF bapiret2,
           gwa_itab4                  TYPE  bapiret2.
    Sales document type
      PARAMETERS: p_auart TYPE auart OBLIGATORY.
    Sales organization
      PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
    Distribution channel
      PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
    Division.
      PARAMETERS: p_spart TYPE spart OBLIGATORY.
    Requested Delivery Date
      PARAMETERS: p_edatu  TYPE edatu OBLIGATORY.
    Sold-to
      PARAMETERS: p_sold  TYPE kunnr OBLIGATORY.
    Ship-to
      PARAMETERS: p_ship  TYPE kunnr OBLIGATORY.
    Material
      PARAMETERS: p_matnr TYPE matnr   OBLIGATORY.
    Quantity.
      PARAMETERS: p_menge TYPE kwmeng  OBLIGATORY.
    Plant
      PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
    Start-of-selection.
      START-OF-SELECTION.
    Header data
    Sales document type
      gs_order_header_in-doc_type = p_auart.
      gs_order_header_inx-doc_type = 'X'.
    Sales organization
      gs_order_header_in-sales_org = p_vkorg.
      gs_order_header_inx-sales_org = 'X'.
    Distribution channel
      gs_order_header_in-distr_chan  = p_vtweg.
      gs_order_header_inx-distr_chan = 'X'.
    Division
      gs_order_header_in-division = p_spart.
      gs_order_header_inx-division = 'X'.
    Reguested Delivery Date
      gs_order_header_in-req_date_h = p_edatu.
      gs_order_header_inx-req_date_h = 'X'.
      gs_order_header_inx-updateflag = 'I'.
    Partner data
    Sold to
      gwa_itab3-partn_role = 'AG'.
      gwa_itab3-partn_numb = p_sold.
      APPEND gwa_itab3 TO  gt_order_partners .
    ship to
      gwa_itab3-partn_role = 'WE'.
      gwa_itab3-partn_numb = p_ship.
      APPEND gwa_itab3 TO  gt_order_partners .
    ITEM DATA
      gwa_itab2-updateflag = 'I'.
    Line item number.
      gwa_itab1-itm_number = '000010'.
      gwa_itab2-itm_number = 'X'.
    Material
      gwa_itab1-material = p_matnr.
      gwa_itab2-material = 'X'.
    Plant
      gwa_itab1-plant    = p_plant.
      gwa_itab2-plant   = 'X'.
    Quantity
      gwa_itab1-target_qty = p_menge.
      gwa_itab2-target_qty = 'X'.
      APPEND gwa_itab1 TO gt_order_items_in.
      APPEND gwa_itab2 TO gt_order_items_inx.
    Line item number.
      gwa_itab1-itm_number = '000020'.
      gwa_itab2-itm_number = 'X'.
    Material
      gwa_itab1-material = p_matnr.
      gwa_itab2-material = 'X'.
    Plant
      gwa_itab1-plant    = p_plant.
      gwa_itab2-plant   = 'X'.
    Quantity
      gwa_itab1-target_qty = p_menge.
      gwa_itab2-target_qty = 'X'.
      APPEND gwa_itab1 TO gt_order_items_in.
      APPEND gwa_itab2 TO gt_order_items_inx.
    CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
      EXPORTING
        order_header_in               = gs_order_header_in
        ORDER_HEADER_INX              = gs_order_header_inx
      IMPORTING
        SALESDOCUMENT                 = gs_vbeln
      tables
        RETURN                        = gt_return
        ORDER_ITEMS_IN                = gt_order_items_in
        ORDER_ITEMS_INX               = gt_order_items_inx
        order_partners                = gt_order_partners.
    Check the return table.
      LOOP AT gt_return into gwa_itab4 WHERE type = 'E' OR type = 'A'.
        EXIT.
      ENDLOOP.
      IF sy-subrc = 0.
        WRITE: / 'Error occured while creating sales order '.
      ELSE.
    Commit the work.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
        WRITE: / 'Document ', gs_vbeln, ' created'.
      ENDIF.

  • How to create the SWF file which was included surrogate pairs.

    I would like to make sure how to create the SWF file which are included surrogate pairs.
    The error of outside the scope of unicode occurred when I compiled(mxmlc) the as file which was set surrogate pairs to 'Unicoderange'.
    Ex, I set the '  '(UTF-16 is '20B9F') to 'Unicoderange'.
    However, I cannot add the surrogate pairs.
    The error of outside the scope of Unicode occurred when I compiled the AS file.
    The reason of error was that the Unicode(UTF-16) of surrogate pairs is invalid.
    Then, I read the following pages.
    These pages are written that unicode-range supported surrogate pairs.
    http://livedocs.adobe.com/flex/3/html/help.html?content=fonts_07.html
    http://www.w3.org/TR/1998/REC-CSS2-19980512/fonts.html#descdef-unicode -range
    So please let me know how to create the SWF file which are included surrogate pairs.
    Environment
    - Flex3.5a
    - TTC: meiryo(ver6.02), msgothic(ver2.50), mspgothic(ver2.50)
    Thanks,
    Takeshi Ishihara.

    I've been able to create project jar files in Eclipse by selecting Export from the File menu, then choose Java - Jar file - and provide the required information, name, destination folder etc. But when I do this, I do not export other jars on the build path this way nor do I expect to do this. I am only concerned with creating a jar file of my own work. A jar file does not "contain" other jar files. If the jar file contains the main method, and requires other jars for it's execution, then you may wish to include a reference to required jars on the class path entry of the Manifest file of the jar file you create. I'm not sure how to create a Manifest file in eclipse though..

  • How to create the sub type field in hr abap infotype

    hi ,
        how to create the sub type field in hr abap infotype.
    regards,
    venkat.

    Try like this also
    creating of infotype please follow these steps ...
    Step 1: Create Infotypes
    i. Goto Transaction PM01 – To create Infotypes:
    ii. Enter the Infotype Number and say create all.
    iii. The following message would display:
    i. PSnnnn Does not exist. How do you want to proceed?
    iv. Click
    v. A maintain Structure screen appears.
    Fill in the short text description and the PS structure of the Infotype.
    Since the fields Personnel No, Employee Begin Date, End Date, Sequential Number,Date of Last Change, Name of user who changed the object are available in the PAKEY and PSHD1 structure, define the PSnnnn structure with only the fields you required.
    vi. Once the PS Structure is created, save and activate the structure.
    vii. In the initial screen of PM01, now click on .
    Create a new entry for the infotype.
    Fill in the values as mentioned below and save.
    Infotype Characteristics:
    Infotype Name of the infotype_ Short Text: __Short Description________
    *General Attributes :
    Time constraint = 1
    Check Subtype Obligatory
    Display and Selection:
    Select w/ start = 3 “Valid record for entered data
    Select w/ end = 5 “Records with valid dates within the period entered
    Select w/o date = 6 “Read all records
    Screen header = 02 “Header ID
    Create w/o end = 1 “Default value is 31.12.9999
    Technical Data:
    Single screen = 2000
    List screen = 3000; List Entry Checked.
    viii. In the initial screen of PM01, now click on .
    Choose the infotype entry in the list.
    Fill in the values as mentioned below and save.
    Technical Attributes:
    In tab section,
    The following attribute values are given:
    Applicant DB Tab = PAnnnn “Infotype Name
    Subtype field = SUBTY
    Subtype table = T591A
    Subty.text tab. = T591S
    Time cnstr.tab. = T591A
    Prim. /Sec. = I Infotype
    Period/key date = I Interval
    and .
    ix. Infotype Screen Modification:
    Edit Screen 2000 from PM01 for the Infotype.
    ABAP Editor for the Infotype Program MPnnnn00 will be displayed.
    Click . Flow Logic will be displayed. There string coding of your own logic.
    Regards
    Pavan

Maybe you are looking for

  • Premiere Elements 7, Sorry, a serious error has occurred  that requires Adobe Premiere Elements to..

    Hi, my software just recently started giving me the folowing error and it does not work (start): Sorry, a serious error has occured that requires Adone Premiere Elements to shut down. We will attempt to save your current project. I had tried everythi

  • Photoshop prints too small in windows7 and windowsXP

    I have just installed my new OfficeJet Pro 8500. Everything went fine on both my new os7 and xp machine. Documents print fine.  The test page Printed fine. When I tried to print cd labels from both machines it prints them 1/4 size. I have checked eve

  • The extract drag and drop function in live view on Dreamweaver cc isn't working?

    Hi there, I've extracted a PSD mockup into Dreamweaver cc and on the online tutorial it shows you how to drag the elements into the live view, but for me it doesn't allow this, when i drag an element onto the live view screen no icons show up, even t

  • ES menu item missing - SMLT problem

    We found an R/3 system where when loggend on in ES a lot of menu entries appears in EN. Our suspect is that the ES language has been imported on the system where Support Packages were already applyed and customer mandant already created. According Os

  • Anyone aware of this "bug"?

    Forms [32 Bit] Version 10.1.2.0.2 Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 Application Server on UNIX Error: FRM-40815 Variable GLOBAL.%s does not exist. Raised during: Attempt to bring up LOV and validate from list = 'yes'. Each fie