How to create users for B2B console in SOA Suite 11g?
Hi,
I have installed SOA Suite 11g and created a new user in weblogic server and assigned groups Deployers, Monitors & Operators. On trying to login(http://hostname:port/b2bconsole) using this new user, im not able to login and the below error is logged.
"There are no trading partners for this user".
Can someone plesae guide me on how to create a new user for B2B as i dont want to grant adminstrators group to developers.
Thanks,
Hi,
Please login as the weblogic server boot user into b2bconsole and then go to users tab of the host trading partner
and search for the newly added user [ provide full username ]
and then assign the role as administrator / monitor from there.
once this is done.. the newly added user should be able to login to the b2bconsole..
monitors have read only access and less priveledges..
Regards,
Vijay
Similar Messages
-
Cannot access EM console on SOA Suite 11g (404 error)
I have installed SOA Suite 11g on a new environment. The admin server and managed server (soa_server1) start up without any errors in logs. However after start up, I am unable to access the enterprise manager console at http://host:port/em due to 404. Interestingly, I can access the WebLogic administration console at http://host:port/console without any issue.
I have installed SOA Suite 11g before on my local machine and have never had any issue like this before.
Is there a way to manually start up the enterprise manager application? I have seen some advise in previous posts which mention the use of emctl (enterprise manager command line control) however, this does not appear applicable to the em app that runs on WebLogic application server in 11g.
Any troubleshooting advice would be greatly appreciated!You can access the EM using http://host:7001/em url.
But for EM to be present in the domain, you should have created your domain with Enterprise Manager template selected. I think, you haven't done this step. Login to your WLS Admin Console, navigate to Deployments. Check for an application named 'em'. If it is not there, then this is the issue.
To get your domain extended with EM, do these steps.
1. Stop your servers in the domain.
2. Invoke the configuration wizard ($ORACLE_HOME/common/bin/config.sh/cmd)
3. Choose Extend Domain option. Select your domain.
4. Select Enterprise Manager template. Complete the wizard.
5. Start your servers.
Now you will be able to access EM, using the above URL.
There is no need for emctl in SOA 11gR1. Starting the Admin Server will help you to work in EM.
Hope this helps!!! -
How to configure something similar to optSoapShortcut in SOA Suite 11g
Hi,
We are migrating processes in BPEL 10g to composites in SOA Suite 11g (11.1.1.5). In one of these processes we are extracting the ws-addressing elements replyTo and MessageID from the SOAP header from the calling process and saving these values into a database. They are later used to be able to reply back to the calling process. In 10g this was no problem but in 11g calls between processes are automatically optimized, meaning that they are not communicating using SOAP. Hence, it seems like we can't get the soap headers the normal way.
According to the Administration Guide for SOA Suite 11.1.1.5 the optSoapShortcut property has been removed which could be used in 10g to specify if the calls should be optimized or not. Is there any other way to configure this in SOA Suite 11g?
If not, is there any way to instead extract these elements from some BPEL API or similar?
Thanks!
Best wishes
KerstinFor release 11g, SOAP optimization is automatically configured. Therefore, if you upgrade your projects from 10g to 11g and are using the optimized shortcut approach in existing applications, note that optimized calls are activated only when the hostname value (as referred to in the WSDL URL in the composite.xml file) matches the Server URL value. Either set both values to the hostname (for example, myhost) or to the full domain name (for example, myhost.domain.com). If these values do not match, a regular SOAP call is performed instead of an optimized local call.
You can still control this using oracle.webservices.local.optimization property.
http://docs.oracle.com/cd/E15586_01/web.1111/b32511/configuring.htm#WSSEC3522
Refer to "Controlling When Local Optimization is Used" -
How to create user for a Domain
Hi
How we can create a User and assign him to a particular domain?
Thanks
BSHi,
could you explain more exactly what you want to do? Remember that there is no out of the box way to create a "read only" user or to do "audit" based on a user id.
You edit the users in the EM console in the following path:
Cluster Topology > Application Server: soa.xxx > OC4J: oc4j_soa > Security Providers > Instance Level Security > Users / Groups
Se my post regaring how to create a permission group for a "custom" domain:
http://halfdecentoracle.blogspot.com/2007/02/how-do-i-create-new-user-in-oracle-soa.html
See Chintan Shah's post on creating a servlet filter to "enforce" a read only view into the BPEL console.
http://chintanblog.blogspot.com/2007/12/i-saw-numerous-people-asking-about-bpel_290.html -
How to create users for iFS9R2???
On iFS9R1 and earlier it was possible to create users from the web GUI using an administrative user's account. On iFS9R2 it wasn't possible, I only could create groups or folders, there wasn't even a menu entry under "new".
Or did I miss or faulty configured something?
+LutzMatt,
I'm using the iFS credential manager. And yes, I can create users using the iFS Manager tool. But with earlier releases it was also possible to create users from the iFS web GUI. Strange thing is that from the iFS Manager it is not possible (at least I didn't find one right now) to delete users, from the web GUI it is!
Anyway, seems the best way would be OID as this is also be used by the new iAS and it might avoid the need for having two seperate user managements.
Thanks for the hint!
+Lutz -
Hi
For SOA Suite 10.1.3.5.1 on weblogic, Is there any way to restrict certain users to some pages in bpel console.. e.g. read only access to bpel console.
I have found articles on web regarding this but they all are for SOA Suite 10.1.3.3 (and 3.4) on Oracle app server. Article provides a hack by using servlet filters.
How to do a similar thing in SOA Suite 10.1.3.5.1 on weblogic ?
Can somebody provide step by step instructions?
ThanksHi James,
I have already seen this link and several refined versions of it but it wont work for weblogic. For example
There is no j2ee/oc4j_soa/applications/orabpel/console directory (i looked into home directory as well but could not found orabpel/console dir).
So question is where to put filter class and how to make changes in web.xml as this file is not present in j2ee/oc4j_soa/applications/orabpel/console/WEB-INF/
I checked deployments in weblogic admin console and seems BPELConsole is deployed as a module under BPELPM ear.
Any idea?
Thanks. -
Creating users for admin console access
When I install the web server onto my system part of the installation is to create an admin user and password. I'd like to create another user to log into the web server admin console with the same or limited permissions. I don't want to have to hand out the 'admin' password to multiple people, I'd prefer to create new accounts for each person that needs to administer some part of the webserver and set permissions for each. Can't seem to find out how this is done in the admin guide.
"Andy" <[email protected]> wrote in message
news:[email protected]..
Hello,
I am using a custom authentication and authorization providers that
work just fine with my applications, but i have problems using Admin
Console with them (WL Server 7.0). The server is successfully started
with a user that has been given rights to '<svr>.myserver.boot' etc.
Logging into Console is successful as well and most Console pages can
be viewed as usual. But when i'm trying to save any changes, or if i
try to just view certain Console pages, i get
'weblogic.management.NoAccessRuntimeException'. For example:
MBean operations need a user with Admin role. -
How to create user defined metrics for SQL Server target?
The customer is not able to create a user defined metrics for SQL Server target.
This is very important for him to use this product.
He is asking how to create user defined metrics?
I sent him Note 304952.1 How to Create a User-Defined SQL Metric in EM 10g Grid Control
But it would work for an Oracle DB, but his target is SQL Server DB
Not able to find the "User-Defined Metrics" link from Database home page.
How to create user defined metrics for SQL Server target?http://download-uk.oracle.com/docs/cd/B14099_19/manage.1012/b16241/Monitoring.htm
-
How to create user group for EIS (Executive Information System) KCBA
Dear Experts,
How to create user group for EIS (Executive Information System)
TCode KCBA
Regards
SaurabhHi ,
Check the below link ,hope it will give some inputs for creating groups.
http://help.sap.com/saphelp_470/helpdata/en/5c/c1c81c445f11d189f00000e81ddfac/content.htm
Regards
udayakumar.k -
hi,
how to create user dsn for microsodt access driver(*.mdb,*.accdb) using command line in 64 bit.
i have installed 64 bit drivers and when use following command
C:\Windows\System32>odbccad.exe CONFIGDSN "Microsoft Access Driver (*.mdb,*.accdb)" "DSN=GLDatabase|Description=GL Data Source|DBQ=C:\DataBase\1.mdb"
CONFIGDSN:'unable to create a datasource for the "Microsoft Access Driver (*.mdb,*.accdb)" component not found in the registry with the error code -2147467259
but it works with C:\Windows\SysWow64yes i have installed Microsoft Access Database engine 2010 redistributale => AccessDatabaseEngine_x64.exe
i can able to create user dsn using odbccad32.exe in system32 folder but using command line its not working
C:\Windows\System32>
odbccad.exe CONFIGDSN "Microsoft Access Driver (*.mdb,*.accdb)" "DSN=GLDatabase|Description=GL Data Source|DBQ=C:\DataBase\1.mdb"
CONFIGDSN:'unable to create a datasource for the "Microsoft Access Driver (*.mdb,*.accdb)" component not found in the registry with the error code -2147467259 -
How to create user defined button in alv report
how to create user defined button in alv report
thnks in advance.Hi,
U can define it the the PF-STATUS ( Menu for ALV ).
For that u have to define it in the EVENTCAT.
form z_eventcat using p_i_eventcat type slis_t_event.
data: i_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = p_i_eventcat
exceptions
list_type_wrong = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear i_event.
read table p_i_eventcat with key name = slis_ev_top_of_page into
i_event.
if sy-subrc = 0.
move 'TOP_OF_PAGE' to i_event-form.
append i_event to p_i_eventcat.
endif.
read table p_i_eventcat with key name = slis_ev_pf_status_set into i_event.
if sy-subrc = 0.
move 'SET_PF_STATUS' to i_event-form.
append i_event to p_i_eventcat.
endif.
clear i_event.
read table p_i_eventcat into i_event with key name = slis_ev_user_command .
if sy-subrc = 0.
move 'USER_COMMAND' to i_event-form.
append i_event to p_i_eventcat.
endif.
And in the DISPLAY
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = v_progname
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_grid_title = v_gridtitle
i_save = 'A'
is_layout = i_layout
it_fieldcat = i_fieldcat[]
it_sort = i_sortinfo
it_events = i_eventcat
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = it_final
exceptions
program_error = 1
others = 2
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*MENU SETTINGS.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'ALV_MENU'.
endform. "SET_PF_STATUS
endform. " Z_EVENTCAT
Now double click on ALV MENU nad u can create a button in the application bar.
Regards,
Pritha. -
How to create EVENTS for a View Cluster.
Hi Tech Gurus,
I have created a view cluster on 5 tables. I need to do a validation and this can be done by using events. But i am unable to create a EVENT for the View Cluster. Could anyone please tell me how to create events for a View Cluster.
Thanks in advance for your esteemed replies.
Regards,
Raghavendra Goutham P.Hello Pasapula
When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
Below the field for the view cluster you have an additional field <b>FORM routines main program</b>. There you have to add the main program containing the FORM routines called by the VC events.
For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
report zus_0120_u1.
* Common Data und access routines for user exits in VC maintenance
include LSVCMCOD.
include zus_0120_f1. "FORM routines for VC events
Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
Regards
Uwe -
How to create wizard for a custom mainenance view/view cluster
Hi Experts,
I have created 5 custom maintenance view and have maintained all the views sequencially and have made the first mainenance view as the start view & header entry and all other views are child or subview of the header view in a custom view cluster. But I want a wizard to help the user / end user successfully enter all the required values for all child views, it will help the user to navigate from the start view to all the child views where the fields of the wizard will be associated to the child maintenance views.
Please suggest how to create wizard for view cluster.
I'll give max reward point for the helpful answer.
Thanks in advance
koustavHello Pasapula
When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
Below the field for the view cluster you have an additional field <b>FORM routines main program</b>. There you have to add the main program containing the FORM routines called by the VC events.
For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
report zus_0120_u1.
* Common Data und access routines for user exits in VC maintenance
include LSVCMCOD.
include zus_0120_f1. "FORM routines for VC events
Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
Regards
Uwe -
How to create variant for table/view ?
Hi,
When I go through SM30, I find a radio button called variant. I don't know the effect.
Can anyone tell me how to create variant for table / view ?
I want to know when we need to create variant for table/view.
Best regards,
Chris Guhi ,
Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
Procedure
To create a new variant:
1. On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
2. On the variant maintenance initial screen, enter the name of the variant to be created.
Note the naming convention for variants (see below).
3. Choose Create.
If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
4. If there is more than one selection screen, select the screens for which you want to create the variant
5. Choose Continue.
The (first) selection screen for the report appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
6. Enter the desired selection values, including multiple selection and dynamic selection.
7. Choose Continue. -
How to created exit for CS02 transaction to maintain bom details of a mater
hi ,
plz explain how to created exit for CS02 transaction to maintain BOM details of a material. what is the BOM component . give me sample example.Hi,
these are the user-exits for CS02
Transaction Code - CS02 Change Material BOM
Exit Name Description
PCSD0001 Applications development R/3 BOMS
PCSD0002 BOMs: Customer fields in item
PCSD0003 BOMs: Customer fields in header
PCSD0004 BOM comparison
PCSD0005 BOMs: component check for material items
PCSD0006 Mass changes user exit
PCSD0007 Check changes in STKO
PCSD0008 WBS BOM: Customer-specific explosion for creating
PCSD0009 Order/WBS BOM, determine URL page
PCSD0010 Order/WBS BOM, determine explosion date
PCSD0011 Knowledge-based order BOM, parallel update
PCSD0012 Customer - Mat. number/mat. number during material exchange
PCSD0013 Customer-specific processing of an explosion for BOM browser
Regards
Nilesh
Maybe you are looking for
-
Don't have primary Key in Target table getting errror while creating index
Hi All, I don't have primary key column in target table, while exicuting mapping I got a error while creating INDEX. Could you please help how to slove this
-
How to use saprfc_allow_start_program in PHP
I'm trying to download documents from sap DMS using saprfc v1.4.1 in PHP. I call the bapi function BAPI_DOCUMENT_CHECKOUTVIEWX in order to download the document. However, after the script executes I'm getting the message "I::001 RFC partner does not
-
Hi Experts. I need to change loading group field in material master, but I can't find it in MM02. Please, confirm if the page is Sales: general/plant (R/3 4.7 version). And I want to know also, if is possible the field become hidden if other field is
-
Is there a way to click on one image and activate the animation in another class?
I'm using the ibooks.js library. So it'd need to .activate another class if using the ibooks-toggleable function. Thanks!
-
if anybody have the help in pdf formats for ABAP 5.0 version then please mail to my i [email protected]