Loading group field

Hi Experts.
I need to change loading group field in material master, but I can't find it in MM02.
Please, confirm if the page is Sales: general/plant (R/3 4.7 version).
And I want to know also, if is possible the field become hidden if other field is not marked ?
Thanks a lot.

Hi.
Thanks for your answer. The field was hidden, because there was not plant view to the material. So I created again via MM01 just to Sales: General/Plant view and problem was solved.

Similar Messages

  • Updating Loading Group on plant record using BAPI

    I am using BAPI to extend to a plant
    BAPI_MATERIAL_SAVEDATA
    I am passing                     
      plantdata-loadinggrp   = wa_plantdata-loadinggrp.
      plantdatax-loadinggrp  = 'X'.
      plantdata-plant        = p_p_plant.
      plantdatax-plant       = p_p_plant.
    At the time of the BAPI call the data is in the table
    All other plant data gets created except for this loading group field (Sales/general plant)  and only when I am usign a specific plant.   It works fine for other plants
    Anybody know any config or setting related to this ?

    solved it

  • Start Routine to Populate Account Group Field from Master data of 0Customer

    Hello Friends. Please help me edit this ABAP code to make it work. I am putting this code in start routine in between two DSO. where I am using the
    Start Routine to Populate Account Group Field from Master data of 0Customer. I do not want to use read from master data functionality since that field 0customer is not there in dso but similar field 0debitor is there. so i want to put this code
    during the load from source DSO to Target DSO.
    Error Explicit length specifications are necessary with types C, P, X, N und
    DATA: L_S_DP_LINE TYPE DATA_PACKAGE_sTRUCTURE.
        types: begin of comp,
         CUSTOMER       type  /BI0/OICUSTOMER,
         ACCNT_GRP          type /BI0/OIACCNT_GRP,
       end of comp.
        DATA: l_S_comp type comp.
        DATA: L_th_COMP TYPE HASHED TABLE OF COMP WITH UNIQUE KEY customer INITIAL SIZE 0.
    IF  L_th_COMP[] IS INITIAL.
    SELECT CUSTOMER ACCNT_GRP FROM /BI0/PCUSTOMER APPENDING CORRESPONDING FIELDS OF TABLE L_th_COMP.
    ENDIF.
    LOOP AT SOURCE_PACKAGE INTO L_S_DP_LINE.
    READ TABLE L_TH_COMP INTO L_S_COMP WITH TABLE KEY CUSTOMER = L_s_DP_LINE-CUSTOMER
    IF SY-SUBRC = 0.
    L_S_DP_LINE-/BIC/ACCNT_GRP = L_S_COMP-/BIC/ACCNT_GRP.
    MODIFY SOURCE_PACKAGE FROM L_S_DP_LINE.
    ENDIF.
    ENDLOOP.
    soniya kapoor
    Message was edited by:
            soniya kapoor

    Hello Wond Thanks for Good Answer and good option, But Client does not like this option and does not like Nav Attribute so he does not want to turn on any Nav Attribute, In general also We hav requirement to read a third table while uploading 1 dso table to 2 dso table,
    so  Please help me edit this ABAP code to make it work. I am putting this code in start routine in between two DSO. where I am using the
    Start Routine to Populate Account Group Field from Master data of 0Customer.
    No syntax Error But during the load it is updating the source table and not the target table. how to define now target table.
    ***SOURCE DSO Table
    types: begin of typ_tgl1.
        include type /BIC/AZDAFIAR000.
        types: end of typ_tgl1.
        types: begin of comp,
         CUSTOMER       type  /BI0/OICUSTOMER,
         ACCNT_GRP          type /BI0/OIACCNT_GRP,
       end of comp.
    DATA: L_th_COMP TYPE HASHED TABLE OF COMP WITH UNIQUE KEY customer
    INITIAL SIZE 0.
      data: wa_itab type COMP.
        data: wa_zdtg type typ_tgl1.
    IF  L_th_COMP[] IS INITIAL.
    ***Master Data Table
    SELECT CUSTOMER ACCNT_GRP FROM /BI0/PCUSTOMER APPENDING CORRESPONDING
    FIELDS OF TABLE L_th_COMP.
    sort L_th_COMP by CUSTOMER.
    ENDIF.
    LOOP AT L_th_COMP into wa_itab.
    select * from /BIC/AZDAFIAR000 into wa_zdtg
                        where DEBITOR  eq wa_itab-CUSTOMER.  *** SOURCE DSO Table
    IF SY-SUBRC = 0.
    wa_zdtg-ACCNT_GRP = wa_itab-ACCNT_GRP.
    MODIFY /BIC/AZDAFIAR000 from wa_zdtg. *** modify SOURCE DSO Table
    ENDIF.
      endselect.
        endloop.
    soniya kapoor

  • Fiori Launchpad Error: Failure - Unable to load groups Resolved!!!!

    Hey Good Fellas,
    This is a solution rather than a discussion, which i thought to do to with a kind generosity of spirit to give back to the community.
    It gives me immense pleasure and happiness to write this particular post, because it is through SCN only i have been able to find the solution.
    Ok, let's get down to the Business quickly, shall we?
    I have been configuring Fiori App - Approve Purchase Orders. All the tasks for this have been done from SAP Help Site.
    Recently I upgraded the ERP/Gateway (Its an embedded deployment) to EHP 7 and UI to SP09, post which the Fiori Launchpad started giving the below error.
    If you look around the SCN, you will probably hit across these threads and so did I.
    http://scn.sap.com/thread/3571448
    SAP Fiori - UI Add-on SP09 update troubleshooting
    With the first thread, I tried everyone's solution and suggestions which had worked for others, but it didn't for me.
    With second thread (Excellently posted by Masayuki Sekihara), it started off with lots of efforts and double-checks applying all of these notes hoping that it would resolve the issue. But I had done all the steps 1-8 and still didn't get the solution.
    Besides the above two mentions I did umpteen number of other ridiculous things like implementing this note, that note, De-implementing another of the notes and everything i found as possible solutions on the Web.
    Now, the breakthrough here is checking the errors in /IWFND/ERROR_LOG. Well, on the browser it used to give error 'Failure - Unable to Load Groups' while at the server side, actual error was something unusual and remotely not related to what the error looked like in the browser. In the back-end, I was getting the error "Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist". And this is something i know how to correct.
    So just keep looking for the errors in /IWFND/ERROR_LOG and shift your focus there. That's really a good place to trouble-shoot.
    And for the record to take care of the error 'Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist' you have to assign the DPC (Data Provider Class) to DMC (Data Modelling Class) correctly by navigating to IMG - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model. There you define the Data provider with the correct Software Version and Voila you are all set! You don't have to worry about the duplicate entry with another Software version, your correct software version is the one you have defined in the System Alias which you are using inside the service, which is generally DEFAULT.
    I am able to get inside the Fiori Launchpad now (I was quite at edge to really give up as all the possible solutions had been ruled out for me ) and do see the tiles of the apps configured.
    I hope this is going to be a good take-away for others who are having Odata handling issues.
    The floor is all yours now for your kind feedback. Be gentle with me, I am a very shy blogger.
    Best Regards,
    Akshay

    Steve,
    If you still have the error, this is what I did to resolve mines.
    1) Goto SPRO - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model
    2) Find out the entry for 'ZINTEROP_MODEL_0001_BE'
    3) Copy that entire row in a notepad for all the fields
    4) Create new Entry with all the fields, except change the Software Version to DEFAULT (As that's what missing for you'
    5) Save and give that another try.
    This is what I exactly wrote in my solution as well.
    Akshay wrote:
    And for the record to take care of the error 'Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist' you have to assign the DPC (Data Provider Class) to DMC (Data Modelling Class) correctly by navigating to IMG - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model. There you define the Data provider with the correct Software Version and Voila you are all set! You don't have to worry about the duplicate entry with another Software version, your correct software version is the one you have defined in the System Alias which you are using inside the service, which is generally DEFAULT.
    A screen-shot perhaps helps you more.
    Let the other duplicate entry with Software Version other than Default be there. Important is that the software version that you have defined in your alias must be the one over here.
    Let me know how that goes?
    -Akshay

  • G/L Account Group field in FI

    HI all,
    I need a report based on the G/L account group from ECC. in BI. I have searched all the datasources in FI like AR ,AP and GL ,but couldn't find the datasource which has G/L account group field.
    Actually my requirement is I need to pick some specific G/L accounts based on G/L account groups.I found the G/L accounts and chart of accounts but not the G/L account group.
    Thx

    Hi Srikanth,
    Thanks for reply,
    You  are right we need to load hierarchy for G/L then we can see all the G/L's for all G/L groups.
    I have one more question when I check in RSA3 for the G/L account numbers, I could not find them.
    I am using the datasource fi_gl_4 and in rsa3 I can see 1000 records data and when I put filter on G/L account and search for the G/L number I needed I cant see it, but it is there in the functional transaction(f.01)?
    How to check for the required G/L's in rsa3 ?
    Thx

  • Set "peoples or groups" field with current user "login name" in sharepoint list form using javascript

    hi friends
    i am trying to set peoples or groups field in sharepoint  list form with current user login name
    here my code
    <script src="http://ajax.aspnetcdn.com/ajax/jquery/jquery-1.9.0.js"></script>
    <script type="text/javascript">
    $(document).ready(function NewItemView () {
    var currentUser;
        if (SP.ClientContext != null) {
          SP.SOD.executeOrDelayUntilScriptLoaded(getCurrentUser, 'SP.js');
        else {
          SP.SOD.executeFunc('sp.js', null, getCurrentUser);
        function getCurrentUser() {
          var context = new SP.ClientContext.get_current();
          var web = context.get_web();
          currentUser = web.get_currentUser();
          context.load(currentUser);
          context.executeQueryAsync(onSuccessMethod, onRequestFail);
        function onSuccessMethod(sender, args) {
          var account = currentUser.get_loginName();
          var accountEmail = currentUser.get_email();
          var currentUserAccount = account.substring(account.indexOf("|") + 1);
        SetAndResolvePeoplePicker("requester",account);
    // This function runs if the executeQueryAsync call fails.
        function onRequestFail(sender, args) {
          alert('request failed' + args.get_message() + '\n' + args.get_stackTrace());
     function SetAndResolvePeoplePicker(fieldName, userAccountName) {
       var controlName = fieldName;
        var peoplePickerDiv = $("[id$='ClientPeoplePicker'][title='" + controlName + "']");
        var peoplePickerEditor = peoplePickerDiv.find("[title='" + controlName + "']");
        var spPeoplePicker = SPClientPeoplePicker.SPClientPeoplePickerDict[peoplePickerDiv[0].id];
        peoplePickerEditor.val(userAccountName);
        spPeoplePicker.AddUnresolvedUserFromEditor(true);
    </script>
    but it is not working
    please help me

    Hi,
    According to your post, my understanding is that you wanted to set "peoples or groups" field with current user "login name" in SharePoint list form using JavaScript.
    To set "peoples or groups" field with current user "login name”,  you can use the below code:
    <script src="http://ajax.aspnetcdn.com/ajax/jquery/jquery-1.9.0.js"></script>
    <script type="text/javascript">
    function SetPickerValue(pickerid, key, dispval) {
    var xml = '<Entities Append="False" Error="" Separator=";" MaxHeight="3">';
    xml = xml + PreparePickerEntityXml(key, dispval);
    xml = xml + '</Entities>';
    EntityEditorCallback(xml, pickerid, true);
    function PreparePickerEntityXml(key, dispval) {
    return '<Entity Key="' + key + '" DisplayText="' + dispval + '" IsResolved="True" Description="' + key + '"><MultipleMatches /></Entity>';
    function GetCurrentUserAndInsertIntoUserField() {
    var context = new SP.ClientContext.get_current();
    var web = context.get_web();
    this._currentUser = web.get_currentUser();
    context.load(this._currentUser);
    context.executeQueryAsync(Function.createDelegate(this, this.onSuccess),
    Function.createDelegate(this, this.onFailure));
    function onSuccess(sender, args) {
    SetPickerValue('ctl00_m_g_99f3303a_dffa_4436_8bfa_3511d9ffddc0_ctl00_ctl05_ctl01_ctl00_ctl00_ctl04_ctl00_ctl00_UserField', this._currentUser.get_loginName(),
    this._currentUser.get_title());
    function onFaiure(sender, args) {
    alert(args.get_message() + ' ' + args.get_stackTrace());
    ExecuteOrDelayUntilScriptLoaded(GetCurrentUserAndInsertIntoUserField, "sp.js");
    </script>
    More information:
    http://alexeybbb.blogspot.com/2012/10/sharepoint-set-peoplepicker-via-js.html
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • RFDOPR10 dynamic selection to add customer group field

    Hello,
    I am trying to add the customer group field in the dynamic selection
    option, when running the RFDOPR10 report. I don't seem to find the
    option to add the customer group field (KNVV-KDGRP). I tried looking in
    the config, but was not able find this report. I also looked for any
    OSS notes, but didn't find anything either.
    Can anyone please tell me if this possible to do? Thanks.
    Ahsan

    you have to update all the following routines in program RM07MLBD which load stock
    IF      BWBST = 'X'.
    *   select the valuated stocks
        PERFORM                  AKTUELLE_BST_BWBST.
      ELSEIF LGBST = 'X'.
    *   all own stock from storage locations or batches
        IF XCHAR = ' '.
          PERFORM                AKTUELLE_BST_LGBST_MARD.
        ELSEIF  XCHAR = 'X'.
          PERFORM                AKTUELLE_BST_LGBST_XCHAR.
        ENDIF.
      ELSEIF   SBBST = 'X'.
    *    special stocks
        CASE    SOBKZ.
          WHEN  'O'.
            PERFORM              AKTUELLE_BST_SBBST_O.
          WHEN  'V' OR  'W'.
            PERFORM              AKTUELLE_BST_SBBST_V_W.
          WHEN  'K' OR  'M'.
            PERFORM              AKTUELLE_BST_SBBST_K_M.
          WHEN  'Q'.
            PERFORM              AKTUELLE_BST_SBBST_Q.
          WHEN  'E'.
            PERFORM              AKTUELLE_BST_SBBST_E.
          WHEN  OTHERS.
    *       Angegebener Sonderbestand nicht vorhanden.
            MESSAGE S290.
            PERFORM              ANFORDERUNGSBILD.
        ENDCASE.
      ENDIF.
    But as material group is in MARA, you could fill a table from MARA using the SELECT-OPTIONS FOR MARA-MAKTL, then update the routine using a FOR ALL ENTRIES OF the result table (if not empty) (you could also use a JOIN with MARA)
    Regards

  • No loading grp field

    Dear all
    I have a sales order for 12 items, wherein for 3 items shipping point is not getting picked. Shipping point is determined as follows : Plant (entered manually) Shipping conditions (CMR/defined) Loading Grp (MMR).
    When I checked the MMR, I found that for these 3 items no Loading grp field exists (forget about the value, complete field is missing) while for other it exists. Infact there are some more fields that dont exist for these 3 items.
    I am in a fix. How is that possible? Do i need to contact an ABAPer?
    regards
    Sapshed

    First go to MM01, select that material which is having the issue and select "Sales: General/Plant" view.  Now see whether the loading group is flowing.
    If not, go to OMS9, input 94  in "Field sel.group"  and enter. There again double click on Loading Group and set the indicator to Reqd. Entry.
    thanks
    G. Lakshmipathi

  • Bulk Edit for Metadata Group, Field, Lookup, Responses and Subscriptions

    Hello,
    Has anyone been able to bulk edit custom configurations in FCSrv Administration window (of course not IN administration window, but as it was editing there).
    In other words: Let say that I have a custom configuration of Metadata Groups, Fields, Lookups, Subscriptions and Responses and I want to implement that in lots of FCSrv systems.
    Another situation: I`ll upgrade my hardware and want to re-install FCSrv but I don`t want to loose all my configurations.
    I`ll have to manually input each configuration? It`s possible to update just a file(s)?
    I know that the backup from FCsvr does this, but its used for DB Backup and not Preferences. I do not want to restore or backup the DB.
    Replacing this files (or some of them): com.apple.FinalCutServer.profile.plist and postgresql.conf do the trick?
    Regards

    As is usual with the world of programing the answer turned out to be ridiculously simple! In the Elements.xml file for the button the javascript that launches the dialog with SP.UI.ModalDialog.showModalDialog was always using the top level site to get the
    custom ASPX page. Doh! Adding the _spPageContextInfo.webServerRelativeUrl in front of the path to my custom ASPX page did the trick. None of this was noticeable to me since the code was loading fine in debugger and I could see that it had the correct SPWeb
    because I was passing in the webURL as a parameter in the URL for opening the dialog. But when the ASPX was loaded I just got the labels.
    var url = webUrl + '/_layouts/15/Generic.BulkEdit/BulkEdit.aspx?selectedItems=' + selectedItemIds + '&amp;ListId=' + listId + '&amp;WebURL=' + webUrl;

  • MRP group field can not be displayed in MRP1 view

    Hi all
    MRP group field can not be displayed in MRP1 view
    please guide me
    thx

    Hi avinash
    consulte your MM guy material master screen group and selection is done by MM guys in general. There they can do setting for this.
    Also why you need MRP group. If it is maintained. It should be done properly otherwise it will create lot of problems.
    Regards
    J . Saravan

  • How to update a People and group field using a sandbox solution

    Hi,
    I am creating a sandbox solution for office 365 and creating a custom form using visual web part, which will allow users to enter data in a custom list.
    And that list also have a user field. I am able to get SharePoint user field on the form (using javascript) which is searching for the user and get a value (working fine).
    Issue: But I am not able to save the user value. Because to save user value I require web, UserID and login name, to construct SPFieldUserValue object or string in "111;#TestUser" format. Moreover that user should be present in
    SiteUserInfoList. 
    I tried web.EnsureUser() but did not work under sanbox solution.
    Can you please provide any pointer or workaround to the problem? I may be missing something here.
    Thanks,
    Himanshu

    Hi,
    According to your description, my understanding is that you want to update the people and group field in Sandbox solution.
    In the sandbox solution, you can still use the web.EnsureUser() function to get the user information, see the thread below:
    EnsureUser in sandboxed solution
    In additional, there is a demo with your similiar requirement for your reference:
    Using the People Picker Control in Sandbox Solutions / Office 365
    Thanks
    Best Regards,
    Jerry Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • InfoPath - Populating People/Group field works on Create, but not on Edit

    Hi- I have a scenario where there are a few data connections hooked up to a primary form. One of those data connections is connected to an assignment list. It consists of 3 columns (Warehouse(Text), Primary
    User(People/Group), Secondary User(People/Group). This list is meant to be a dynamic source that my main form uses to determine assignments. I have a button that pulls in the data from that list onto my form. I am assigning the DisplayName to my DisplayName,
    the Account ID to my AccountID and the AccountType to My AccountType. This works just fine when I go to create an item--> all values populate correctly, I can save my form with all of the newly brought in values.
    For some reason, every time I open the form after that and try to use the same button, the query runs as normal, but my people/group fields do not populate - assuming they are not already populated. I
    have validated that the rules are running and they are running with the values I want (I have written the values from the people/group fields to text fields and they appear to be correct).
    I did look at the SP logs and it gave me this: Failed to get SPGroupName from GroupID. Error Message: Group cannot be found. Callstack: at Microsoft.SharePoint.SPGroupCollection.GetByID(Int32 id) at Microsoft.SharePoint.WebControls.PeopleEditor.set_SharePointGroupID(Int32
    value).The StateManager is disposing and calling ReleaseLockedStates() (Count=0).
    Any thoughts? I have not gotten any errors when interacting with the form. I had to pull this from the ULS logs.
     Thanks, Jesse
    Jesse A. Brandenburg

    The rules go as following:
    1) Switch Views to a more specific view (less fields showing)
    2) Query Data Connection for assignments
    3-12) Set primary contacts
    This looks at my assignment list and based on the location sets the display name, account id and account type on
    my form, based on what exists on the other list
    *I have the same thing happening for 10 fields based on location.  I am using a filter for each one to identify the correct location populates that person field.  
    13) I am setting a field to true that identifies that the rule was just run with a sign and date of username.
    I have verified that the values are trying to be populated by looking at bothe the default values of the display name, account id, and account type of my people picker fields, however they are not showing anything within the picker itself.  Additionally
    I have a view that shows my assignments data connection that is populated correctly.  
    Thanks for your response - 
    Jesse
    Jesse A. Brandenburg

  • Pulling user/group field data from SharePoint list using REST, jQuery, Knockout.js Sharepoint 2013

    I'm trying to make an interactive task board based on the task list app in SharePoint 2013. The task lisk includes fields like "Title","Description","Status","% Complete","Due Date","Assigned To",
    etc. I used knockout.js to bind "Title","Description", and "Status" to my HTML controls. Here is some of the code:
    var ViewModal = function(items, listname){
    var self = this;
    self.sortBy = ko.observableArray(sortBy);
    self.tasks = ko.observableArray(items);
    self.listname = ko.observable(listname);
    self.auto = ko.observable(false);
    self.getTasks = function() {
    clearTimeout(self.getTasks);
    // server relative url to REST service endpoint
    var ajaxurl = _spPageContextInfo.webServerRelativeUrl + "/_vti_bin/listdata.svc/" + self.listname() + "?$orderby=PriorityValue";
    $.ajax({
    type: "GET",
    url: ajaxurl,
    contentType: "application/json; charset=utf-8",
    dataType: "json",
    cache: false,
    processData: true,
    success: function (data, status, xhr) {
    if (status == "success" && data) {
    ko.mapping.fromJS(data.d.results, mapping, self.tasks)
    $(".task-item").draggable();
    error: alert
    if (self.auto()) {
    setTimeout(self.getTasks, 10000);
    <div class="tasks-column">
    <div class="column-header">Not Started</div>
    <!-- ko foreach: tasksNotStarted -->
    <div class="task-item">
    <div class="view" data-bind="visible: !IsEditing()">
    <button class="edit" data-bind="click: $root.editTask">edit</button>
    <h2><span data-bind="text: Title"></span></h2>
    <div data-bind="html: Description"></div>
    <span data-bind="text: PriorityValue"></span>
    </div>
    <div class="edit" data-bind="visible: IsEditing">
    <button class="save" data-bind="click: $root.saveTask">save</button>
    <input type="text" data-bind="value: Title"></input>
    </div>
    </div>
    I'm having trouble displaying the data from the "Assigned To" user/group field. I tried:
    <span data-bind="text: AssignedTo"></span>
    But it displays the field as [object Object]
    I tried using $select/$expand
    ?$select=Title,AssignedTo/Id,Assignedto/Title&$expand=AssignedTo/Id,AssignedTo/T‌​itle";
    But it still returns the [object Object]

    Hi,
    Please use the REST URI below:
    /_api/lists/getbytitle('ListName')/items?$select=Title,AssignedTo/ID,AssignedTo/Title&$expand=AssignedTo/ID,AssignedTo/Title
    More information for your reference:
    How to get User Details and User Group Details in SharePoint 2013 REST API with Knockout for SharePoint Js (KoSpJs)
    http://www.ashokraja.me/post/How-to-get-User-Details-and-User-Group-Details-in-SharePoint-2013-REST-API-with-Knockout-for-SharePoint-Js-(KoSpJs).aspx
    How to Get Login Name and Display Name using SharePoint 2013 REST API
    https://www.nothingbutsharepoint.com/sites/devwiki/articles/pages/how-to-get-login-name-and-display-name-using-sharepoint-2013-rest-api.aspx
    Best Regards
    Dennis Guo
    TechNet Community Support

  • Search criteria is not working in Responsible Group field in sap crm could you please help me this how to achieve.

    search criteria is not working in Responsible Group field in sap crm could you please help me this how to achieve.I have writen code on EH_ONSEARCH .as per below...what changess i need to do..and through partner function and adding the selection params please send the sample .
    code. partner funtction - ZRG DATA :
    DATA : lv_partner_fct type .
    types: begin of ty_resp,
           partner    type but000-partner,
           name_last  type but000-name_last,
           name_first type but000-name_first,
           mc_name1   type but000-mc_name1,
           mc_name2   type but000-mc_name2,
           end of ty_resp.
    DATA: lv_resp_bp type STANDARD TABLE OF ty_resp INITIAL SIZE 0,
           lw_resp_bp type ty_resp.
    IF lv_attr_name = 'Rgroup'.
    lr_entity->get_property_as_value( EXPORTING iv_attr_name = if_crm_srqm_uiu_const=>gc_attr_low
                                       IMPORTING ev_result = lv_low ).
    IF lv_low IS INITIAL.
    SELECT partner
           name_last
           name_first
           mc_name1
          mc_name2
    FROM but000 INTO table lv_resp_bp
    WHERE mc_name2 = lv_low and bu_group = '0010'.
    loop at lv_resp_bp into lw_resp_bp.
        lv_low = lw_resp_bp-mc_name2.
      lr_query_service2->add_selection_param( iv_attr_name = 'Rgroup'
                                                iv_sign = lv_sign
                                                iv_option = lv_option
                                                iv_low = lv_low
                                                iv_high = lv_high ).
      ENDLOOP.
    if lv_partner_fct = 'ZRG'.
      lr_entity = lr_iterator->get_next( ).
    CONTINUE.
    ENDIF.
    lv_attr_name = 'BU_PARTNER'.
    ENDIF.

    <b>You can acheive   this .... first by creating the search help exit    ... by  creating the maintaince  view   then   using it in the   Creation of the search help </b> ...
    see the link for attaching the view   to the serach help .
    <a href="http://">http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_elementary.htm</a>
    reward  points if it is usefull...
    Girish

  • Sales Group field should come in to S_ALR_87012178 AR report

    Hi,
    1.Is it possible to bring the *Sales Group field from billing document to S_ALR_87012178 AR report. Actually we have pulled Sales group field from billing document to FBL5N report.But client dont want that.He wants Sales group field in S_ALR_87012178 report.please help me whether it is possible or not.
    2. Is there any report in SD module which will show the sales group wise report.
    Please help me...
    Thanks
    Suvarna

    Hi,
    You can go to F.99 in order to see all the reports for Customers.
    Hope you will find the best suitable report.
    When you are using "Drill down reports" do not forget to select
    "Object list (more than one lead column)" this would give you a option to sort them the line items as you want.
    Just for your information: SAP1 is the transaction code for all the reports in SAP.
    Regards,
    Ravi

Maybe you are looking for