How to create word (.DOC) reports!
Is there a way to create Microsoft word document from Forms/Reports? Is it possibble that the user enters some parameters and data is feteched from the database and a .doc file is created? Any suggestions using Oracle Forms/Reports are welcome. I tried using OLE in forms but couldn't get what I wanted. Can bookmarks and a template in Word play any role in here?
(I am not looking for RTF documents. A RTF file genrated by ORACLE reports has all the frames for the boilerplates and fields and it is not really practical to edit that file without really messing it up)
Thanks in advance,
null
Thanks Mick,
It sure looks relevant. I will go through it and see what it has. However, I guess Oracle does not do QA on their documents. The page footer says Oracle Forms to Microsoft Excel. In any case, the approach should not be much different.
Thanks again,
~Ajay
null
Similar Messages
-
How to setup word docs, converted to PDF on local drive with links to a second file at a page
how to setup word docs, converted to PDF on local drive with links to a second file at a page
Need to setup a set of word documents, converted to PDF that has links from one file to a second file at a given page.
I would like to setup a set of pdf documents, on the hard disk of a PC or Mac, that can be open with acrobat pro running on the same computer and have the link jump to, and open in a new window, in acrobat pro, to a given page of a second document in the set.
Is there a way to setup a link in word and the conversion to pdf that will result in a link that is equivalent to the acrobat link type you get when you add a link of the type Go to a page in another document?
Tools-Advanced Editing-Link tool, make a box
Check: Go to page view, Next (Create go to view dialog opens)
Open second document and go to page
Click “Create go to view dialog” to set up link
Result is a link, when view by link properties, with an action of
Go to a page in another document
File: C:\My Documents\second file.pdf
Page: 43
Zoom level: Custom
I got close but did not solve the problem:
I have a version that uses links to a website, using #page=43 at the end of the hyperlink.
That works but will only open to the page if is through the web browser, opening the acrobat reader plugin.
I need to open from a folder on the local harddisk (with relative links), in acrobat pro to the given page of the pdf, on a PC or a Mac.
I could bookmark each page “pagenumberxxx” and jump to the bookmark/page if that would get around some problem
Current Systems in use to create documents with links and view them:
Windows XP SP3
Word 2003 SP3
Acrobat 9 pro version 9.4.4
Or just to view them:
Mac OS 10 Lion version 10.7.4
Acrobat 9 pro version 9.5.1
(note I have limited understanding of Mac’s)
JohnNo. There seems to be no automated way to do it. You can of course go into the PDF and manually add links after you have converted to PDF, but that is what we want to avoid having to do. We want it to be automatic from the Word doc.
-
How to create material doc using bapi
hi all,
pls tell me how to create material doc using bapi ,
if i give po no , it will create material doc no .
advance thanks ,Hi venu,
Please go thru this example, it will help u.
REPORT ZBAPIMM01 LINE-SIZE 255 NO STANDARD PAGE HEADING
LINE-COUNT 065(001).
TABLES: T001L, "Storage Locations
MARA, "General Material Data
MAKT, "Material Descriptions
MBEW, "Material Valuation
MARC. "Plant Data for Material
DATA: BAPI_HEAD LIKE BAPIMATHEAD,
BAPI_MAKT LIKE BAPI_MAKT, "Material Description
BAPI_MARA1 LIKE BAPI_MARA, "Client Data
BAPI_MARAX LIKE BAPI_MARAX,
BAPI_MARC1 LIKE BAPI_MARC, "Plant View
BAPI_MARCX LIKE BAPI_MARCX,
BAPI_MBEW1 LIKE BAPI_MBEW, "Accounting View
BAPI_MBEWX LIKE BAPI_MBEWX,
BAPI_RETURN LIKE BAPIRET2.
DATA: BEGIN OF INT_MAKT OCCURS 100.
INCLUDE STRUCTURE BAPI_MAKT.
DATA: END OF INT_MAKT.
DATA: BEGIN OF INT_MAT OCCURS 100,
WERKS(4), "Plant
MTART(4), "Material type
MATNR(18), "Material number
MATKL(9) , "Material group
MBRSH(1), "Industry sector
MEINS(3), "Base unit of measure
GEWEI(3), "Weight Unit
SPART(2), "Division
EKGRP(3), "Purchasing group
VPRSV(1), "Price control indicator
STPRS(12), "Standard price
PEINH(3), "Price unit
SPRAS(2), "Language key
MAKTX(40), "Material description
END OF INT_MAT.
SELECT-OPTIONS:
PLANT FOR MARC-WERKS OBLIGATORY MEMORY ID PLT,
MATERIAL FOR MARA-MATNR MEMORY ID MAT,
MATLTYPE FOR MARA-MTART MEMORY ID MTY,
DIVISION FOR MARA-SPART MEMORY ID DIV.
PARAMETERS: F_FILE LIKE RLGRAP-FILENAME
DEFAULT 'C:\DATA\ZMATERIAL.XLS' MEMORY ID F_FILE,
GETDATA AS CHECKBOX, "Tick to download materials data to local harddisk
UPDDATA AS CHECKBOX. "Tick to update date to Materials Master
IF GETDATA = 'X'.
PERFORM DOWNLOAD_DATA.
PERFORM DOWNLOAD_FILE.
ENDIF.
IF UPDDATA = 'X'.
PERFORM UPLOAD_FILE.
PERFORM UPDATE_MM.
ENDIF.
FORM DOWNLOAD_DATA.
SELECT * FROM MARC WHERE LVORM EQ ' '
AND WERKS IN PLANT
AND MATNR IN MATERIAL.
CLEAR MARA.
SELECT SINGLE * FROM MARA WHERE MATNR = MARC-MATNR.
CHECK MATLTYPE.
CHECK DIVISION.
CLEAR MBEW.
SELECT SINGLE * FROM MBEW WHERE MATNR = MARC-MATNR
AND BWKEY = MARC-WERKS.
CLEAR MAKT.
SELECT SINGLE * FROM MAKT WHERE SPRAS = 'EN'
AND MATNR = MARC-MATNR.
WRITE:/ MARC-WERKS, "Plant
MARA-MTART, "Material type
MARA-MATNR, "Material number
MARA-MATKL, "Material group
MARA-MBRSH, "Industry sector
MARA-MEINS, "Base unit of measure
MARA-GEWEI, "Weight Unit
MARA-SPART, "Division
MARC-EKGRP, "Purchasing group
MBEW-VPRSV, "Price control indicator
MBEW-STPRS, "Standard price
MBEW-PEINH, "Price unit
MAKT-SPRAS, "Language key
MAKT-MAKTX. "Material description
INT_MAT-WERKS = MARC-WERKS. "Plant
INT_MAT-MTART = MARA-MTART. "Material type
INT_MAT-MATNR = MARA-MATNR. "Material number
INT_MAT-MATKL = MARA-MATKL. "Material group
INT_MAT-MBRSH = MARA-MBRSH. "Industry sector
INT_MAT-MEINS = MARA-MEINS. "Base unit of measure
INT_MAT-GEWEI = MARA-GEWEI. "Weight Unit
INT_MAT-SPART = MARA-SPART. "Division
INT_MAT-EKGRP = MARC-EKGRP. "Purchasing group
INT_MAT-VPRSV = MBEW-VPRSV. "Price control indicator
INT_MAT-STPRS = MBEW-STPRS. "Standard price
INT_MAT-PEINH = MBEW-PEINH. "Price unit
INT_MAT-SPRAS = MAKT-SPRAS. "Language key
INT_MAT-MAKTX = MAKT-MAKTX. "Material description
APPEND INT_MAT.
CLEAR INT_MAT.
ENDSELECT.
ENDFORM.
FORM DOWNLOAD_FILE.
call function 'WS_DOWNLOAD'
EXPORTING
FILENAME = F_FILE
FILETYPE = 'DAT'
FILETYPE = 'WK1'
tables
data_tab = INT_MAT
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC = 0.
FORMAT COLOR COL_GROUP.
WRITE:/ 'Data Download Successfully to your local harddisk'.
SKIP.
ENDIF.
ENDFORM.
FORM UPLOAD_FILE.
call function 'WS_UPLOAD'
EXPORTING
FILENAME = F_FILE
FILETYPE = 'DAT'
FILETYPE = 'WK1'
tables
data_tab = INT_MAT
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC = 0.
FORMAT COLOR COL_GROUP.
WRITE:/ 'Data Upload Successfully from your local harddisk'.
SKIP.
ENDIF.
ENDFORM.
FORM UPDATE_MM.
LOOP AT INT_MAT.
Header
BAPI_HEAD-MATERIAL = INT_MAT-MATNR.
BAPI_HEAD-IND_SECTOR = INT_MAT-MBRSH.
BAPI_HEAD-MATL_TYPE = INT_MAT-MTART.
BAPI_HEAD-BASIC_VIEW = 'X'.
BAPI_HEAD-PURCHASE_VIEW = 'X'.
BAPI_HEAD-ACCOUNT_VIEW = 'X'.
Material Description
REFRESH INT_MAKT.
INT_MAKT-LANGU = INT_MAT-SPRAS.
INT_MAKT-MATL_DESC = INT_MAT-MAKTX.
APPEND INT_MAKT.
Client Data - Basic
BAPI_MARA1-MATL_GROUP = INT_MAT-MATKL.
BAPI_MARA1-BASE_UOM = INT_MAT-MEINS.
BAPI_MARA1-UNIT_OF_WT = INT_MAT-GEWEI.
BAPI_MARA1-DIVISION = INT_MAT-SPART.
BAPI_MARAX-MATL_GROUP = 'X'.
BAPI_MARAX-BASE_UOM = 'X'.
BAPI_MARAX-UNIT_OF_WT = 'X'.
BAPI_MARAX-DIVISION = 'X'.
Plant - Purchasing
BAPI_MARC1-PLANT = INT_MAT-WERKS.
BAPI_MARC1-PUR_GROUP = INT_MAT-EKGRP.
BAPI_MARCX-PLANT = INT_MAT-WERKS.
BAPI_MARCX-PUR_GROUP = 'X'.
Accounting
BAPI_MBEW1-VAL_AREA = INT_MAT-WERKS.
BAPI_MBEW1-PRICE_CTRL = INT_MAT-VPRSV.
BAPI_MBEW1-STD_PRICE = INT_MAT-STPRS.
BAPI_MBEW1-PRICE_UNIT = INT_MAT-PEINH.
BAPI_MBEWX-VAL_AREA = INT_MAT-WERKS.
BAPI_MBEWX-PRICE_CTRL = 'X'.
BAPI_MBEWX-STD_PRICE = 'X'.
BAPI_MBEWX-PRICE_UNIT = 'X'.
WRITE:/ BAPI_HEAD, BAPI_MARC1.
call function 'BAPI_MATERIAL_SAVEDATA'
exporting
HEADDATA = BAPI_HEAD
CLIENTDATA = BAPI_MARA1
CLIENTDATAX = BAPI_MARAX
PLANTDATA = BAPI_MARC1
PLANTDATAX = BAPI_MARCX
FORECASTPARAMETERS =
FORECASTPARAMETERSX =
PLANNINGDATA =
PLANNINGDATAX =
STORAGELOCATIONDATA =
STORAGELOCATIONDATAX =
VALUATIONDATA = BAPI_MBEW1
VALUATIONDATAX = BAPI_MBEWX
WAREHOUSENUMBERDATA =
WAREHOUSENUMBERDATAX =
SALESDATA = BAPI_MVKE1
SALESDATAX = BAPI_MVKEX
STORAGETYPEDATA =
STORAGETYPEDATAX =
IMPORTING
RETURN = BAPI_RETURN
TABLES
MATERIALDESCRIPTION = INT_MAKT
UNITSOFMEASURE =
UNITSOFMEASUREX =
INTERNATIONALARTNOS =
MATERIALLONGTEXT =
TAXCLASSIFICATIONS =
RETURNMESSAGES =
PRTDATA =
PRTDATAX =
EXTENSIONIN =
EXTENSIONINX =
IF BAPI_RETURN-TYPE = 'E'.
WRITE:/ 'Error Message ', BAPI_RETURN.
ENDIF.
ENDLOOP.
ENDFORM.
*---End of Program
Reagrds,
Kumar -
How to create a daily report for sales order
hi
how to create a daily report for sales order. what fields it must consists of. what are the tables it need?Hi
You have to use the sales order tables VBAK,VBAP and VBEP
So keep date field on selection screen
and treat this date as Order creation data audat field in VBAK.
based on this fetch the data from VBAK and VBAP with the following fields like
VBELN, KUNNR,NETWR,POSNR, MATNR,ARKTX,KWMENG,WAERS etc and display in the report
<b>Reward points for useful Answers</b>
Regards
Anji -
How to Create MultiSheet Excel Report Output in XML Publisher in Oracle R12
Dear All,
How to Create MultiSheet Excel Report Output in XML Publisher in Oracle R12.
My Requirement is to develop RTF Template and geneate Excel output in Multiple sheet.
plz guide me on this..
thnx
Khushalplz see
BI Publisher: How to create Multisheet in Single Excel file using Excel Template [ID 1352000.1]
for r12 you can use excel template
i think it more appropriate for excel output -
How to convert word doc into pdf - which product of adobe i need to use- what upgrades - am a newbie
How to convert word doc into pdf - which product of adobe i need to use- what upgrades - am a newbie - simple answers please - Thanks in advance.
@Pipeline2007 - which version of Microsoft Office have you got? Older versions of Acrobat aren't compatible with the latest versions of Office, see this link for info:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html -
How to create a consolidated report in report builder?
Hi,
How to create a consolidated report in report builder?
There are 8 tables in database.
All the tables have same columns with same column names.
I want all the values of 8 tables to be displayed in the same report, but in a particular order.
Can we do an 'order by' for tables??? like 'order by table_name' ???
Thank You.You can create a query like this:
select * from (
select 1 sort_order, * from t1
union all
select 2, * from t5
union all
select 3, * from t2
etc.
order by sort_order, <something else if needed> -
How to create a standard report that allows filtering?
Hi Guys and Gals,
Sometimes, the standard report is great because it gives the user the feeling of a grid. i.e. All of the values are editable on one page, kind of like a spreadsheet. That is sometimes very useful. But if there is a lot of data, a filtering mechanism is necessary.
So will one of you Apex gurus please tell me how to create a standard report that also allows data filtering?
Allowing the user to specify the number of rows displayed would be peachy-keen too.
Thanks,
Kim
P.S. I'm running Apex 4.1 with Oracle 11g.Kim2012 wrote:
Your idea sounds very promising, but I apparently need a nudge in the right direction. From "Create Page", I clicked on "Form" and then "Tabular Form". Why would you do this? The advice given was
create a standard report page using the Create New Page wizardi.e. go to Home > Application Builder > Application > Create Page and click Classic Report, this was suggested because the original post said:
>
So will one of you Apex gurus please tell me how to create a standard report that also allows data filtering?
>
Nothing about forms. Tabular Forms, Tabular Forms. Despite many enhancements over the last few versions, tabular forms still cause problems, especially for novices trying to go beyond their own competence and the built-in capabilities of wizard-generated tabular forms.
More good advice: Re: Newbie question-how does the tabular form work? How to populate prim key? and—if based on decent database design—out of the box you have a usable and robust application. Use an Interactive Report or a custom report template and add some CSS and you can get something a lot more powerful, flexible and better looking than any tabular form. Spend the time you haven't wasted on frustrated hacking of tabular forms adding more features and enhancements to your app. -
How to create a crystal Report using C# and SQL Server
Hi, im new in creating crystal report using SQL Server, and im making a project.. and could someone help me how to connect your .sdf (SQL Server File) from the bin to your crystal report? thanks a lot.. i followed some instructions like this one (https://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?forum=csharpgeneral)
but i got an error on the adding of server name and database portion.. thanks a lot in advanceHello,
Crystal Reports are supported on
http://scn.sap.com/community/crystal-reports.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
How to create a snapshot report on the specific destination?
dear all
How to create a snapshot report on the specific destination?
thanks
johnuser8779435 wrote:
dear all
How to create a snapshot report on the specific destination?
thanks
john
Hi,
when prompted just input the full path with filename for example
Enter value for report_name: /tmp/awrreport.htmlHope this helps
Cheers -
How to create a FSG report in pdf format
How to create a FSG report in pdf format?
Thanks In Advance
KrisHi,
There is an enhancement request at user group review to create FSG's in PDF format. However, I transformed the FSG output by using ascii2pdf shareware software (do a search on google.) I created a shell script that did the transformation and emailed the report from Oracle Apps. It seems to work ok.
Renee -
How to create drill down report in sap query
how to create drill down report in sap query ,
hi,
The pdf below gives the steps to create drill down report.
http://www.sappoint.com/abap/eis.pdf
also check.
<a href="http://72.14.203.104/search?q=cache:k-SFYy_rjPIJ:www.hrexpertonline.com/archive/Volume%252003%2520(2">http://72.14.203.104/search?q=cache:k-SFYy_rjPIJ:www.hrexpertonline.com/archive/Volume%252003%2520(2</a>
regs,
jaga -
Oracle forms how to create excel format report
hello :)
these are my codes that generates report in live previewer. my problem is how to create an excel report producing the same output i can get in live previewer.
Declare
pl_id ParamList;
v_alrt number;
v_acct_ent_date date;
v_start_date date;
v_end_date date;
v_end_date1 date;
v_end_date2 date;
v_end_date3 date;
v_end_date4 date;
iss_group varchar2(100);
monthidentify date;
Begin
SELECT B.USER_GRP
INTO ISS_GROUP
FROM GIIS_USERS A,GIIS_USER_GRP_HDR B
WHERE A.USER_GRP = B.USER_GRP
AND A.USER_ID = USER;
Select max(acct_ent_date)
INTO v_acct_ent_date
FROM gipi_polbasic;
SELECT TRUNC(ADD_MONTHS(SYSDATE, -24))
INTO v_end_date1
FROM DUAL;
select LAST_DAY(:FILTERS.FROM_DATE)
INTO V_END_DATE2
FROM DUAL;
SELECT TRUNC (TO_DATE (:FILTERS.END_DATE), 'MONTH')
INTO V_END_DATE3
FROM DUAL;
IF :FILTERS.FROM_DATE IS NULL THEN
MESSAGE('Please Enter a starting date in the format "MM/DD/YYYY"');
MESSAGE('Please Enter a starting date in the format "MM/DD/YYYY"');
GO_ITEM('FILTERS.FROM_DATE');
Raise FORM_TRIGGER_FAILURE;
END IF;
IF :FILTERS.END_DATE IS NULL THEN
MESSAGE('Please enter an Ending date in the format "MM/DD/YYYY"');
GO_ITEM('FILTERS.END_DATE');
Raise FORM_TRIGGER_FAILURE;
END IF;
IF :FILTERS.FROM_DATE > :FILTERS.END_DATE THEN
MESSAGE('Starting Date cannot be greater than Ending Date');
MESSAGE('Starting Date cannot be greater than Ending Date');
:FILTERS.FROM_DATE := NULL;
:FILTERS.END_DATE := NULL;
GO_ITEM('FILTERS.FROM_DATE');
Raise FORM_TRIGGER_FAILURE;
END IF;
IF :FILTERS.DATE_FILTER = 'AED' and :FILTERS.FROM_DATE > v_acct_ent_date and
:FILTERS.END_DATE > v_acct_ent_date then
MESSAGE('No premium batch production occured between the given dates');
MESSAGE('No premium batch production occured between the given dates');
Raise FORM_TRIGGER_FAILURE;
END IF;
IF ISS_GROUP <> 2 or USER = 'MKMIF' THEN
/* IF :FILTERS.END_DATE <> V_END_DATE2 THEN
MESSAGE('DATE PARAMETER SHOULD BE EXACTLY 1 MONTH');
MESSAGE('DATE PARAMETER SHOULD BE EXACTLY 1 MONTH');
Raise FORM_TRIGGER_FAILURE;
END IF;
IF :FILTERS.FROM_DATE <> V_END_DATE3 THEN
MESSAGE('FROM DATE PARAMETER SHOULD BE THE FIRST DAY OF THE MONTH');
MESSAGE('FROM DATE PARAMETER SHOULD BE THE FIRST DAY OF THE MONTH');
Raise FORM_TRIGGER_FAILURE;
END IF;*/
IF :FILTERS.FROM_DATE < V_END_DATE1 THEN
MESSAGE('FROM DATE SHOULD BE 2 YEARS BEFORE OR 2 YEARS BETWEEN THE SYSTEM DATE');
MESSAGE('FROM DATE SHOULD BE 2 YEARS BEFORE OR 2 YEARS BETWEEN THE SYSTEM DATE');
Raise FORM_TRIGGER_FAILURE;
END IF;
END IF;
IF :FILTERS.DATE_FILTER = 'AED' THEN
BEGIN
Select acct_ent_date
INTO v_acct_ent_date
from gipi_polbasic where acct_ent_date between :FILTERS.FROM_DATE and :FILTERS.END_DATE;
EXCEPTION
When TOO_MANY_ROWS Then
Null;
When No_Data_Found Then
Message('Premium batch productions can only be done at the end of the month. Kindly check the dates you entered.');
Message('Premium batch productions can only be done at the end of the month. Kindly check the dates you entered.');
Raise Form_Trigger_Failure;
END;
END IF;
v_alrt := show_alert('PRINT_ALERT');
IF v_alrt = alert_button1 then
pl_id:= Get_Parameter_List('tmpdata');
IF NOT ID_NULL(pl_id) then
DESTROY_PARAMETER_LIST(pl_id);
END IF;
pl_id:=Create_parameter_List('tmpdata');
Add_Parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
Add_Parameter(pl_id,'start_date',TEXT_PARAMETER,TO_CHAR(:FILTERS.FROM_DATE,'MM/DD/RRRR'));
Add_Parameter(pl_id,'end_date',TEXT_PARAMETER,TO_CHAR(:FILTERS.END_DATE,'MM-DD-RRRR'));
Add_Parameter(pl_id,'CREDITING_BRANCH',TEXT_PARAMETER,:FILTERS.BRANCH_CODE);
Add_Parameter(pl_id,'LINE_CODE',TEXT_PARAMETER,:FILTERS.LINE_CD);
Add_Parameter(pl_id,'INTERMEDIARY_NAME',TEXT_PARAMETER,:FILTERS.INTM_NAME);
Add_Parameter(pl_id,'INTERMEDIARY_TYPE',TEXT_PARAMETER,:FILTERS.INTM_TYPE);
IF :FILTERS.Date_Filter = 'AED' then
RUN_PRODUCT(REPORTS, 'PREM_PROD_AEDALL.rep' ,SYNCHRONOUS,RUNTIME,FILESYSTEM,pl_id);
elsif :FILTERS.Date_Filter = 'ED' then
RUN_PRODUCT(REPORTS, 'PREM_PROD_EDALL.rep' ,SYNCHRONOUS,RUNTIME,FILESYSTEM,pl_id);
End IF;
END IF;
End;
-------------------------------------------------------------------------------------------------------------------------------------------------------------------Hello,
build a standard report using REPORT BUILDER (Oracle 10g Release 2)
set
DESFORMAT=SPREADSHEET
Regards,
Tarun -
How to create a single report using 5 difftent reports
Hi Experts
how to create a single report using 5 repors in it.
Example
I have to create a Survey history report using
Reports like Surevy 1
Surevy 2
Surevy 3
Surevy 4
Surevy 5
Please suggest me.
SantoshUse Analysis Process Designer (RSANWB) to feed each of the survey BEX reports to one DSO. Assuming each of the surveys has something in common to compare. Could also be used as a snapshot storage for the surveys in case history needs to be compared/archived.
Build the Direct update DSO with the survey objects. Add needed time characteristics and/or version control objects to the key.
Data sources will be the 5 surveys.
Add formula to hardcode version/time for history.
Data target is the direct update DSO.
http://help.sap.com/saphelp_nw2004s/helpdata/EN/49/7e960481916448b20134d471d36a6b/frameset.htm
-SM -
How to create documentation for report programs and how to use it
how to create documentation for report programs and how to use it in the selection screen by placing an icon in the Applicatin Tool bar. If i click this icon the help documentation has to display.
Note: Exaple <b>RSTXSCRP</b> programs selection screenHi
1 goto SE38 transaction, give the program name
2 Click on documentation radiobutton & then press change
3 Write your PURPOSE, PREREQUISITES etc details
4 Save the same & Activae it.
The icon will come automatically on selection screen
Thanks
Sandeep
Reward if useful
Maybe you are looking for
-
Ok, I have the latest Mac OS and I keep it up to date with the software updater and I'm quite annoyed with the Apple people because there hasnt been an update for the iSight cam that will work with the latest Mac OS, or any version past 10.3.9 for th
-
My selected playlists are not saved
When I connect my ipod it launches the ipod configuration window. I check my playlists to copy to my ipod but it says that "Can't find the iPod" when I click "apply". The iPod appears on top of my playlists but not on my desktop. What can I do to sav
-
Can someone help with information on production one add on
We are dealing up with the add on of production one and i would like to have some documentation or information on the functions this add on is offering . I would really appreciate in case some can help me on this. thank you
-
JAG error: duplicate definition of class
Hi, When I run the JAG it adds duplicate class definitions to my JPR file. For example: Error(21,8): duplicate definition of class ky.gov.pwdwo.model.bc4j.handler.PwdWorkOrderHandlerImpl I can compile and run the application after I remove the duplic
-
ORA-02051 from 4 independent processes using XA
Hello, I am infrequently encountering errors in starting a transaction (tpbegin). In the latest case I observed the following. 1) The XA log reported "ORA-02051: another session in same transaction failed" and "xaosterr: OCITransStart rtn 2051" from