How to created a new report in content tracker report?

Hi
I need to created a new report that show who modified the document's metadata and when, but I have never used Content Tracker and I do not know how.
Appreciate the help you can give me.
Thanks.

Hello,
The content tracker and ContentTrackerReports components can be installed in UCM server by simple clickable options. Below are the steps to install the Content tacker and Content report.
Steps:
1. Open the UCM instance with admin
2. Click Admin Server under Administration link.
3. Click Content Tracker and ContentTrackerReports checkbox ( under Document Management)
4. Now Click the update button at the bottom.
5. Restart the UCM server instance to see the changes.
Now you will see an option for Content Tracker Reporting. It has some default reports.
Let me know how it goes. If you need.... will explain how you can create your custom reports.
If its helpful then please mark correct or helpful answer.
Thanks,
MAK

Similar Messages

How to create a clickable Table of contents using Crystal Reports 8.5

How to create a clickable Table of contents using Crystal Reports 8.5. I was able to create the table of contents using subreport and temporary table. but not able to link to the pages.
how to make it clickable ?
-Vivek

Hi Vivek,
To you may create on demand sub report.
In main report only the link will be shown when you click on the link the sub report will be opened in a new tab.
It can be placed in a Group header and to show the data for that particular group only.
Click on the Help menu in the crystal Reports Designer and open the Crystal Reports Help
Go to Index tab and type in subreport
Select Creating On demand you will get lot of information on that.
Please let us know if that is enough to solve your problem
Regards,
Aditya Joshi

Crystal Reports XI - How to create a new field using a formula field

I'm quite new to CR, but have been learning quickly!
I would like to know how to automatically create a new record/field based on another field in that row...
I have a report showing the following data:
Run Code     Start KM    Stop KM    Status
H2                 100            150           Partial
H2                 150             155          Partial
H2                 155             160          Partial
S3                 120             150       Completed
The status is generated by comparing the 'Start KM' and 'Stop KM' against fields in another table called 'Start Odo' and 'Stop Odo'
In this example...
H2 has 'Start Odo' and 'Stop Odo' values of 90 to 160, therefore there is still 90-100 to check. The 'Start KM' and 'Stop KM' is equal to the 'start Odo' and 'stop Odo' for S3, therefore it shows completed.
My question is how do you create a formula field, which will add an entire row...displaying the values 90-100.
I've been trying to use a conditional check in the 'Start KM' column, that sees if status is equal to partial than if start km is greater than start odo (Which is the reference km) then display the value of start odo in the new row. I'm stuck at how to create a new row.
I want the final result to look like this...
Run Code     Start KM    Stop KM    Status
H2                  90              100         Partial
H2                 100             150          Partial
H2                 150             155          Partial
H2                 155             160          Partial
S3                 120             150       Completed
Any suggestions would be more than appreciated

Hi Adi
Looking at your examples it seems that you want to add a row to the existing recordset (rows fetched from the database).
If it is the case (even if based on a formula) then you can not do it within crystal. Crystal is designed to display data and ideally it should not generate the new data.
However, as per your requirement you can try to add this logic at database end. May be a command object within Crystal Reports can help you.
Let me know if you do not understand anything.
Regards
Nikhil

How do I create a new Folder for each test report based on Serial number?

I want to be able to create a new folder for each test report based on serial number. Each time a UUT is tested, I want the report to go to the appropriate folder. What is the best way to do this?
Thanks

Hello Tman,
This is a slightly tricky question. The reason being, the report options like the report path etc, are set before you see the serial number prompt when you run your UUT. There might be other ways of getting around this, but a quick solution would be modifying the process model.
I modified the PreUUT callback to set the report options. I passed the reportOptions as a parameter to this sequence. In the PreUUT sequence, I set the following fields:
Parameters.ReportOptions.GeneratePath=False
Parameters.ReportOptions.ReportFilePath= "c:\\"+ Locals.SerialNumber +"\\report.xml"
I hope this would give you an idea.
SijinK

How to create a new repository in EP 6

I was wondering how to create a new repository in EP 6 SP2 CM. I am farmiliar with using repository managers, but I just want to create a new repository similar to the dfaul repositories that are provided by sap, such as "discussions or documents". The reason is that I want to be able to report "only on the size of this repository"
Thanks
Jeremy

Jeremy -
You can create a CM repository using the following path:
System Administration -> System Configuration -> Knowledge Management -> Configuration -> Content Management -> Repository Managers -> CM Repository
Click on the New button.
Enjoy!
Kyle

How to create a new row for a VO based on values from another VO?

Hi, experts.
in jdev 11.1.2.3,
How to create a new row for VO1 based on values from another VO2 in the same page?
and in my use case it's preferable to do this from the UI rather than from business logic layer(EO).
Also I have read Frank Nimphius' following blog,but in his example the source VO and the destination VO are the same.
How-to declaratively create new table rows based on existing row content (20-NOV-2008)
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/13-create-with-params-169140.pdf
I have tried:
1.VO1(id,amount,remark1) and VO2(id,amount,remark2) are based on different EO,but render in same page,
2.Drag and drop a Createwithparams button for VO1(id,amount,remark),
3.add: Create insertinside Createwithparams->Nameddata(amount),
4.set NDName:amount, NDValue:#{bindings.VO2.children.Amount}, NDtype:oracle.jbo.domain.Number.
On running,when press button Createwithparams, cannot create a new row for VO1, and get error msg:
<Utils> <buildFacesMessage> ADF: Adding the following JSF error message: For input string: "Amount"
java.lang.NumberFormatException: For input string: "Amount"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
Can anyone give some suggestions?
Thanks in advance.
bao
Edited by: user6715237 on 2013-4-19 下午9:29

Hi,CM,
I'm really very appreciated for your quick reply! You know, today is Saturday, it's not a day for everyone at work.
My principal requirement is as follows:
1.select/check some rows from VO2, and for each selection create a new row with some attributes from VO2 as default values for VO1's corresponding attributes, and during this process the user may be cancel/uncheck or redo some of the selections.
--so it's better to implement it in UI rather than in EO.
2.it's better to implement this function with declarative way as in Frank Nimphius' blog.
--little Jave/JS coding, the better. I only have experience in ORACLE FORMS, little experience in JAVA/JS.
In order to get full information for the requirements of my use case, can take a check at:
How to set default value for a VO query bind variable in a jspx page?
(the end half of the thread: I have a more realworld requirement similar to the above requirement is:
Manage bank transactions for clients. and give invoices to clients according to their transaction records. One invoice can contain one or many transactions records. and one transaction records can be split into many invoices.
Regards
bao
Edited by: user6715237 on 2013-4-19 下午11:18
JAVE->JAVA

How to create a new selection screen IN LOGICAL DATABASE PNPCE

how to create a new selection screen LDBS PNPCE

Hello Ankit,
Do you want to create a new selection screen in LDB PNPCE, or do you want to create a new selection screen in one of your reports using LDB PNPCE?
For later (which is more common), you can use HR Report Category.
Hope this helps.
Best Regards,
Biraju Rajyaguru

How to create more than 21 lists in interactive reports

hello everyone,
I am new to ABAP as well as this site. Kindly help, I want to know how to create more than 21 lists in interactive reports.
Also, how can i create them without using WHEN 1, wHEN 2 and so on...
Kindly help.
thank you

Hello,
Using Intracive Reports its not possible to cretate more than 21 lists.
But its possible to create more than 21 using ALV concept.
for sample ALV u can serch in SDN.
Regards,
Anil.

How to create a new variant and a job sheduled to use it for the ......

How to create a new variant and a job sheduled to use it for the exisisting programs

Hi
1. The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
<b>The commonly used ALV functions used for this purpose are;</b>
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.
<b>
How you call this function in your report?</b>
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
Reward all helpfull answers
Regards
Pavan

How to create a new selection screen LDBS PNPCE

how to create a new selection screen LDBS PNPCE

Hello Ankit,
Do you want to create a new selection screen in LDB PNPCE, or do you want to create a new selection screen in one of your reports using LDB PNPCE?
For later (which is more common), you can use HR Report Category.
Hope this helps.
Best Regards,
Biraju Rajyaguru

How to create a new session by ABAP?

Good afternoon everyone:
This is my first question in the forum, can anybody tell me how to create a new session to display report output in a ALV program? Which function or method can used? I'm freshman.
Thx.
Edited by: Joshua Lee on Nov 21, 2008 10:04 AM

Hi Joshua,
Welcome To SDN.
I am not clear about your queestion.
if u r doing an ALV report if u give selection screen inputs if press execute buttom or F8 u wil get the report.
if u want the out put in the next screen. you can develop the screen in the module pool
Regards
Rasheed
Edited by: Rasheed salman on Nov 21, 2008 10:25 AM

How to create a new System Data

Hi guys.
I need to create a new System Data with which to filter a list output using a field derivated from siebel marketing. This data isn't between the standard system data like CampaingCode, SegmentId .....
Now i discover one .XML file (someting like Marketing....xml), in the OracleBIData/web/config directory, in which there are defined all the standard System data like:
<WebExpression>
</WebExpression>
Can I try to modify this file and add a new system data? if the answere is YES, hao i can do this? My real problem is how take a system value, from siebel marketing, to assign at this new systme data.
Thanks in advance
Best reguards

Hi
thanks for your solution,
i created a new Data carrier type AC for viewing auto cad files and given the path as, C:\Program Files\AutoCAD 2006\acad.exe"
and at Define serveres and files or folders,
defined the data carrier as Autocad type was default as AC,
at Identify frontend computers i could not enter any thing it is only in display form and no values were there and niether could be entered.
and my datacarrier created is not there to be selected while creating documents.
through CV01N create documents.
i suppose this is because i have already defaulted PC as the data carrier type. default system as my data carrier.
please clarify my Below douts also
as in my configuration i have defined only one Datacarrier ie Default PC, will this do all the need full, or will lead to to any complication in any aspect,
i want to know what is the Advantages of defining many datacarriers or the Limitation of a single Datacarrier.
iam facing a situation where a particular software say PDF reader or AutoCAD, is not installed in all the System. and iam thinking of installing this Software in a particular System or say in the Content Server system.
can this software be made used to view these cad and Pdf files on the front end system where this software is not installed,
Say in a particular PC the software AutoCAD is not installed and if he wants to View the AutoCAD file,
another problem iam facing is
while Creating a New AutoCAD file in my system through DMS Create, it gives a message "Drawing file is not Valid"
while i can create a Word Doc File, but it is not possible to create a new AutoCAD file throuh DMS, (AutoCAD is Installed in my system)
also i have no idea of how to create a New Data carrier type,
what exactly have to be filled in
1, define data carrier type
2, define server and files or folder
3, identify frontend computers
please provide configuration details or if possible screen shot details
points will be awarded for sure.
Thanks and Regards
Sathish

Standard process for creating a new version of an existing report

Hi All,
We are using Siebel 8.1 with BI Publisher.
Does any one know the standard process for creating a new version of an existing report - ie if 'BIP Report XXX' is created and works correctly from the siebel view but then an enhancement is developed, how is the enhancement deployed so that the new version completely replaces the old?
One suggestion was:
You can upload a new version of an existing report. You have to navigate to Administration - BIP > Report Template Registration... search for the report you need to replace (I would say that the new rtf file need to have the same name). Now you have to go to the "Template" column where there is the reference to the report file already uploaded but you don't have to click on the link that is displayed you have to click near the link in order to place the cursor on the field then you will be able to see the Multi Value Grup icon .. you click on it and you will be able to upload a new file.
We have tested this process today, however it is not effective in replacing the old version of the report.
After carrying out this process (including related steps from bookshelf - ie "click upload files"), we can generate the report from the relevant siebel view and the previous version of the report is still generated.
Is there a standard process for replacing an existing report that is effective?
Thanks.

Hi ,
This currently seems like a bug , we have encountered this too.
work around is you have to delete the rtf files from server Siebel\client\temp\XMLP directory and upload them again so that they are not cached any more.
same on dedicated client you may have to delete relavant files form siebel\client\temp\xmlp directory and upload again.
Thanks,
Vamsi

Hi experts how to create a z t.code for a report in a report group

Hi Experts,
I have to create a new z t.code a report which is in a report group and i have to add that t.code in a custom menu.
how to do it?
Thanks in Advance.
Regards,
Hitu

Hi Hitu,
Go to SE93 and input your tcode and selection the option 'Transaction with parameters'.
And in Default values, you have to give values like 'Report Name ' etc. I am not sure exactly what values but you have to make entries here.
Shylesh

GGB1 Substitution by exit : how to create a new exit ?

Hi,
I create a substitution by exit, and I want to use a new exit, please how to create a new exit (transaction or IMG path) ?
Regards.
Moderator: Please, search SDN

CCopy the contents of one and paste it into the other. Or duplicate the first project and then paste the contents of the second.

How to created a new report in content tracker report?

Similar Messages

Maybe you are looking for