How to customize the message using HttpSession info in WL-PubServer

Hi, im using Weblogic 10.3 Publish-Subscribe Server (PubServer) in order to create Comet application.
http://e-docs.bea.com/wls/docs103/webapp/pubsub.html
We are utilizing JMS Message system to support Clustered environment, and everything works great and as expected, however now we need to support sending User Customized data like (Internationalized Messages, date formatted in user timestamp preference and others).
Since we are posting the payload updates into JMS in a subsystem this 'User Preference (stored in HttpSession) is not accessible'. My goal is to try to put a hook into WL PubServer mechanism that delivers the message to the client(which is attached to an specific Channel) and be able to customize the Data (using HttpSession information) before it gets delivered.
I have researched about this for the past few days without luck, also trying to search information about the com.bea.httppubsub.servlet.ControllerServlet which is the responsible to handle this but again always end in a dead end. I'm starting to think this is not possible at all (at least with the current WL PubServer).
I'll be glad to hear any feedback on this.

Hi,
Sender object is type of object any time if you want to use any property/attribute of sender object first you need to type cast it with your desire object.
For more information, you could refer to:
http://blog.jsinh.in/managing-msmq/#.VPe5mnkfqM8
http://forums.asp.net/t/343932.aspx?How+can+I+get+values+of+sender+object+in+C+
Regards

Similar Messages

How to Customize the Message "No Row Returned" from a Report

Hi,
I've been trying to customize the Message "No Row Returned" from a Report.
First i followed the instructions in Note:183131.1 -
How to Customize the Message "No Row Returned" from a Report
But of course the OWA_UTIL.REDIRECT_URL in this solution did not work (in a portlet) and i found the metalink document 228620.1 which described how to fix it.
So i followed the "fix" in the document above and now my output is,..
"Portlet 38,70711 responded with content-type text/plain when the client was requesting content-type text/html"
So i search in Metalink for the above and come up with,...
Bug 3548276 PORTLET X,Y RESPONDED WITH CONTENT-TYPE TEXT/PLAIN INSTEAD OF TEXT/HTML
And i've read it and read it and read it and read it and can't make heads or tails of what it's saying.
Every "solution" seems to cause another problem that i have to fix. And all i want to do is customize the Message "No Row Returned" from a Report. Please,...does anyone know how to do this?

My guess is that it only shows the number of rows it has retrieved. I believe the defailt is for it to only retrieve 50 rows and as you page through your report it retrieves more. So this would just tell you how many rows was retireved, but probably not how many rows the report would contain if you pages to the end. Oracle doesn't really have a notion of total number of rows until the whole result set has been materialized.

How to customize error message using oraus.msg file?

Hi,
Is there a way to modify the oracle error message (for example: instead of ORA-01481: invalid number.. we modify it to "hello ! use a valid format.." ), is it possible using the oraus.msg file if not is there a solution?
Many thanks

968420 wrote:
Hi Gauyav and Keith,
i thak you for your quick responses , but i want the customized message to be displayed wherever the oracle error appears (in oracle forms screens , sql tool requests, ) not only in pl/sql code,That is a really bad idea
{message:id=1007020}
It would render the database completely unsupportable by anyone, and based on the quality of exception handling that is generally seen on these forums would result in databases that simply don't work.
SQL> declare l_dummy number;
2 begin
3    select null into l_dummy from dual
4    where 0 = 1;
5 exception when others then
6    raise_application_error(-20666, 'It doesn''t work!');
7 end;
8 /
declare l_dummy number;
ERROR at line 1:
ORA-20666: It doesn't work!
ORA-06512: at line 6
as we've a lot of forms screens and it's not possible to modify all of them.These are strange kinds of forms that it is possible to create a lot of them but not possible to modify them.
Is there a solution for this?Fix the forms.

How to Customize the Error Message when a user enters a wrong password

Hi Gurus
Pls Help out me that
How to Customize the Error Message when a user enters a wrong password ?
I need the Help to Customize the messege ?
How we can do
Pls Tell me indetail

Firstly many appologies I have given you slightly duff information here, I had been editing the file above for email notification texts not logon / password texts.
The file you need is actually a portal .par file and can be found in the deployment/pcd directory. The file you need is called com.sap.portal.runtime.logon.par (with a .bak extension at this time).
You need to copy this file to a local machine and unzip the contents. The files you need to edit are contained in a further jar file which can be found in the \PORTAL-INF\lib directory - it is called umelogonbase.jar. It too needs to be extracted and the file you need to edit is logonMessages_xx.properties (where the xx is the language code you are using).
In this file you will find lines like:
NUMERIC_REQUIRED=Invalid new password (must contain digits)
You need to identify which texts you wish to modify and edit the text to the right of the equals sign. Once complete rezip the umelogonbase.jar file and then the com.sap.portal.runtime.logon.par (this time name it without the .bak extension. Then logon to the portal and upload the new par and you should see your new logon messages.
Haydn

How to customize the error messages in web analysis reports

Does anyone know how to customize the error messages that web analysis shows ,
I want to customize the below error message with a custom error message
"Document does not exist or no authorization to open document.Error occurred while loading document"
Does anyone know how to do this ?

Rajesh,
you may want to check these links
How to the Change the Application Stopped Message
How to Change the Dispatcher Running, No Server Connected Message
http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
Thanks
Bala Duvvuri

How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way

How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way

Hi,
Thanks for the suggestion. I've been playing around with some of the classes of the java.net package and java.io
Using the URL class i can get the content of the data from a STATIC page and output that response to file so that is does not display to the client broswer.
But this only works if the URL i give points to a static html page.
So the problem i'm getting is if i'm righting in arguments in the URL, this means that server needs to process the arguments i give and its sends back a dynamic result. Because its dynamic the URL class can not handle this and throws me an exception everytime :(
Have u ever tried to do some things like this?
Rahul

How to display the message along with a value using BBP_CHECK_BADI

Hi Gurus,
I need to display a message dynamically when the user create's a shopping cart. I am using Check_badi for this. i.e., I need to display the buyer number and amount left for him dynamically. I am storing both of them in variables and don't know how to display the messages laong with some message " the amount left for <XXXXXX> is <$$$$$$$$>". Can you help me out.
Thanks,
Neelima

Hi,
you can use the function module 'BBP_PD_MSG_ADD'. This is the function module normally used for the displaying the error messages in SRM.
See wether you can use already available error messages , use the transaction SE91 , and the message class being BBP_PD

How to find the configuration use the Z message class.

Usually when I do some configuration, it may need to create some message. such as the Validation.
It raise a message when I run some standard t-code. So when I check some Z message class to find what program use this message, i can not find anything. So I assume there might two situation:
1、we can not trace it dome when the program didn't write like this way:    MESSAGE E003(ZFI).
2、this message might be used in some configuration,not in program.
so how do we find the configuration use this message? or Is there any way can trace all message ?
Thank you so much for your sincere answer.

Hi,
Case 1: Message is defined correctly with message number & message class.
     Example - Message E003(ZFI).
Easy to locate the message using whereused list.
Case 2 :
There are some FM's like BALW_BAPIRETURN_GET where we pass the message details.
For example :
call function 'BALW_BAPIRETURN_GET'
        exporting
             type       = p_message-msgty
             cl         = p_message-msgid
             number     = p_message-msgno
             par1       = p_message-msgv1
             par2       = p_message-msgv2
             par3       = p_message-msgv3
             par4       = p_message-msgv4
*          LOG_NO     = ' '
*          LOG_MSG_NO = ' '
        importing
             bapireturn = p_return
        exceptions
             others     = 1.
In these case, we won't be able to track the message number from where used list. So, what we do is before calling these FM we use the below statement,
IF 1 = 2. message e003(zfi). ENDIF.
    so that message can be tracked using where used list.
Case 3: Some messages can be configured in message control.( Table T100S ) . For those
messages we search for table T100S in the program.
Regards,
DPM

How to read the messages in the JMS Queue using JMX

Hi,
          I want to read messages in the JMS queue using JMX. I was able to read using QueueBrowser but want to modify priority of the messages using JMX.
          I tried to use JMSDestinationRuntimeMBean but it does not allow us to read messages unless we pass the message Id. Is there any way that I can get all the messages in the queue.
          I am using Weblogic 8.1 SP4
          Can someone please help me in this regard.
          Thanks,
          Kiran.
          Edited by KGudipati at 10/22/2007 1:22 AM

Hi,
As far as i know, JMS Object Messages is not supported by XI JMS adapter.
you need to have the JMS provider to transform the message to bytes messages.
(Refer to SAP note 856346)

How to delete the messages in the purges folder?

if the mailbox is enabled the single item recovery, then the messages would move from deletion folder to the purges folder After running the following script,
Search-Mailbox dave -searchdumpsteronly
-deletecontent
so my question is how to delete the messages in the purges folder with some script or retention policy?
Please click the Mark as Answer button if a post solves your problem!

Thank you all,
As the mailbox is enabled single item recovery.
I just want to make the items neither in deletion folder, nor in purges folder.
So I think there are two ways to achieve this.
Method 1,disabled the single item recovery. then delete the items in deletion folder ,so it wouldn't enter to the purges folder, it just deleted permanently. then enable the single item recovery
Method 2,delete the items in deletion folder,then the messages move to the purges folder, then delete the messages in purges folder.
the Method 1 is not so good ,as it need to disable the single item recovery firstly, then enable single item recovery .
So I want to use the Method 2
Please click the Mark as Answer button if a post solves your problem!

How to print the message in 2 lines?

How to print the message in 2 lines?
Here i am having it like this... MESSAGE i000(zm) WITH lv_uname.
here I want to print lv_uname in 2 lines because it lengthy one.
Thanks,
Sridhar.

No man, itas not comming..I am using the below logic to print my message:
CONCATENATE text-I01 lv_printdate1 text-I02 INTO lv_printname
SEPARATED BY space.
MESSAGE i002(zm) WITH lv_printname.
its printing in a single line...

How to log the exception using Log action in Oracle Service Bus

Hi,
Whenever an exception is raised how to log the exception using Log action in oracle service bus.After logging where I have to find the logged message.

It would be in the log file for the managed server which ran the request. If you are logging the message at a lower level than your app server, however, you won't see it. You should be logging the exception at Error level.

How to delete the messages from SXMB_MONI which are already cancelled .

Hi All,
The messages were earlier in System error(Red flag) state so i cancelled it manually.
I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
can any tell me the procedure of doing it.
thanks
Sai.

Hi AmitSri,
Thanks for u r reply,
What is retention period, where can i find this option.
And i don't have authorizations to sxmb_adm --> configure delete procedure
--> Define interfaces for archiving and retention period.
and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
Thanks
Sai.
Edited by: sai_SHA on Aug 17, 2011 12:29 AM

How to delete the messages from sxmb_moni with status cancelled

Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
Suman

I think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
       1.      In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
       2.      Select the job(s) to be scheduled.
       3.      Specify the start time and date.
       4.      Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs.

How to delete the messages from JMS Queue

Hi,Can anybody help how to delete the messages from the JMS Queue.Thanks in advance.

You can dequeue the message using a JMS client or delete it using Weblogic Admin Console -
http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e13952/taskhelp/jms_modules/queues/ManageQueues.html
Regards,
Anuj

How to customize the message using HttpSession info in WL-PubServer

Similar Messages

Maybe you are looking for