How to customize the prev and next buttons separately in slideshows?

Is there a way to customize the prev and next buttons separately in slideshows in muse? When I import a background image that looks like a right arrow it puts the image for both prev and next buttons. I import it by selecting the next button, and then clicking on the folder icon labelled "Image" in the Fill drop-down menu in the Tool bar at the top of the Muse page.

Yes, it should be very easy. Here is how I do this:
First, I move the arrows onto the image, and double click the box so that I can remove the arrow character.
Then, I go up to the "Image Fill" and click the file icon to fill with an image
Then, I select the other arrow, and do the same
Hope this helps!
Julia

Similar Messages

  • How do I position the back and next buttons in a full screen lightbox

    I'm working on a portfolio website, and it has five sections (each section is 1440px wide).  I am trying to put in a full screen lightbox for some images.  When I adjust the settings for the lightbox, I am just keeping the Back and Next buttons.  However, when I put the buttons in one place, they either appear in a different position in the browser, or just don't appear at all.  Maybe there's a technique I am missing with regards to putting the buttons in a place most computer browsers will be able to find it.  (Pictures of the problem are below, and they use the sample pictures for the slideshow, but it doesn't make a difference what pictures are in there. 
    Muse document.  The arrows are pink and can be seen on the left and right sides.
    Web Browser Preview.  No arrows, even though they're in the Muse document.

    I see that you are using a long page with slideshow in lower section of the page. Navigation arrows are placed around 3200 , so when you will scroll the page down you can view the next and previous buttons.
    Try to change navigation arrows and then check.
    Thanks,
    Sanjit

  • I'm trying to add prev and next button to a gallery

    I've found a free flash gallery which looks good for my need here: http://www.flashgallery.org/
    The only problem is that the gallery doesn't have prev and next buttons for the full size images, so I'm trying to add them.
    I've been able to add those buttons, but they only work if I don't click on a thumb, as I click on a thumb they stop working.
    In the code there is a function called loadGImage which loads the full size images, originally that function accepted 2 parameters, I've added a 3rd one which store the current image's index inside an array, so that I can use my buttons to call that function with index+1 for next and index-1 for prev.
    In addition to this I've added a variable which is updated everytime a full image is shown, that variable contains the image's index.
    Clicking on thumb the buttons stop working because the current image's index turns to "undefined" so they can't pass a correct value to loadGImage.
    I've checked the code of the gallery, but I can't find where is said to the thumbs to call loadGImage, if I'd found that code I could add the index parameter and my buttons would work.
    I'm sure that the thumbs call loadGImage because I've put a trace() inside the function to see when it is activated.
    Here you can find the source file of the gallery (plus some images to see how the gallery works)
    http://www.fileden.com/files/2008/4/9/1858524/FlashGallery2.rar
    The code commented using /*   */ is the code written by me.
    Can you help me to find where the thumbs make the call to loadGImage?

    The informations about the images are read from an XML file.
    These variables will contain the informations
    _root.description = new Array();
    _root.small_image = new Array();
    _root.big_image = new Array();
    _root.total_images = 0;
    This code creates the thumbs
    function createSmall()
        _root.smallContainer.createEmptyMovieClip("smallImageContainer", 10);
        var _loc4 = 0;
        var _loc3 = 0;
        for (var _loc2 = 0; _loc2 < _root.small_image.length; ++_loc2)
            _root.smallContainer.imageContainer.attachMovie("smallImage", "smallImage_" + _loc2, 100 + _loc2);
            m = _root.smallContainer.imageContainer["smallImage_" + _loc2];
            m._x = _loc3 * 50;
            m._y = 0;
            m.imageContainer.loadMovie(_root.small_image[_loc2], 100);
            m.iData = Array();
            m.iData.big = _root.big_image[_loc2];
            m.iData.title = _root.description[_loc2];
            ++_loc3;
        } // end of for
        _root.smallImageContainer._x = 5;
        _root.smallImageContainer._y = 0;
    } // End of the function
    And this is how full size images are loaded
    function loadGImage(title, bigImgURL)
        _root.bigImage.imageContainer.loadMovie(bigImgURL, 100);
        _root.bigImage.imageContainer._x = 0;
        _root.bigImage.imageContainer._y = 0;
        _root.title.text = title;
        //trace(bigImgURL);
    } // End of the function
    I've checked around the fla file, but I haven't found any code associated to the thumbs which says to call loadGImage, that's my problem, because the code itself is not hard to understand.

  • How to hide the Print and Export button in analytics report or tasks pane

    Hi Experts,
    In BIEE 11g,
    How to hide the Print and Export button in analytics report or tasks pane ?
    For example:
    In console,I have created one userA which is belong to BIConsumer GROUP , when I make use of the highest user 'weblogic' to create one simple report, then the userA will login the analytivs to view this report (not dashboard), it will show the print and export as below.So customers do not want to give him the privilege for printing and exporting.
    In addtion, go to catalog->tasks(left corner), it will also show the print and export button. So how to hide or not access these button?
    Note: Maybe it can use the policy for consumer role for implementing this requirement, but I do not know how to modify the policy. Are you facing the problem? Thanks.

    Hi,
    1. Create seperate folder for Reports & Dashobard.
    2. For BI_Consumer (userA) set the catalog permission to view Dashboard Folder only and remove permission on the Report Folder (you can give traverse permission but don't give Open permision).
    3. By this user won't be able to open or run any reports in that folder and the only way he can see the reports is through Dashboard and on dashboard the export and print buttone can be removed very easily.
    Mark helpful if it helps.
    Regards,
    Kashi
    Edited by: K N Yadav on 24 May, 2013 1:51 AM

  • How to customize the infoview and dashboards.

    Post Author: [email protected]
    CA Forum: WebIntelligence Reporting
    Hi all,
    how to customize the infoview and dashboards.
    scenerio1: all users should have same look &  feel of infoview. - please tell me the steps how set the preferences for this scenerio.
    scenerio2: every should have  different look and feel (example user1 should have different view with user2). - please tell me the steps how set the preferences.
    Thanks,
    Madhu.

    Post Author: Use_BO
    CA Forum: WebIntelligence Reporting
    Hi Madhu,
    For Scenario 1 : Go to CMC.
    Go to : Home > BusinessObjects Enterprise Applcations > InfoView
    You can customise Inforview properties and Rights here, like setting up ur logo,style sheets etc.
    For Scenario 2: Each User will have to customize their own Infoview.
    Go to Infoview. On the top right corner will be 3 icons. Click on the 'Preferences' icon.
    In the General tab of preferences you can customise the infoview settings.
    Hope this helps.
    Thanks!!

  • How to disable the maximize and minimize button of JDialog

    How to disable the maximize and minimize button of JDialog. I have an application which has JDialog box, but in that i should not have maximize and minimize button.If any one come across this problem and got a solution please helpout me.

    Btw, isn't it a little strange to ask thisquestion...
    Actually, I thought it was meant to be sardonic...
    Dialogs don't have those buttons, so the question
    n should be to the OP how did he/she get them in the
    first place? Cuz they aren't using JDialog to do it,
    unless it's something to do with a specific look &
    feel.I somehow missed that, good point :-)

  • Navigation back and forth between anchor points with "prev" and "next" buttons?

    Hi all,
    I am working on a horizontal layout site that has anchor points on each part. As the user scrolls, it snaps to each anchor point. It works fine with just the mouse wheel, but I'd like to have previous and next buttons that allow for easy navigation between the points. I know on each section I can have the buttons to jump from say A>B>C and then C>B>A, but this is a single "prev" and "next" set of buttons that are pinned to the page. So, as the page scrolls left to right, the buttons stay put. Is there a way to just have them go to the previous and next point in the line, rather than linking a button to anchor point A/B/C, etc?

    I'm not sure I'm making my question very clear. Your response doesn't address what I'm asking, unfortunately. I know how to make buttons that are linked to individual anchor points. But I'm trying to make buttons to link to the next anchor point, or a specific spot on the page. Think of how you would navigate on a horizontal page, that's what I'm looking to duplicate.

  • Webhelp: how to add a Previous and Next button

    I'm using Robohelp 8 and generating Webhelp on a Windows XP machine. The output displays on IE by default.
    My problem is simple: In my Webhelp output, I want a Previous and Next button to appear at the top of each topic. That's all. But I don't see how to set this.
    I don't want to create browse sequences; if select topic B, and I've already opened topic D and Z, I should be able to click the Previous button to go from topic D -> topic B, or the Next button to go from topic Z to topic B.
    Also, how do I open my Webhelp output so that the TOC is open (i.e., all topics are displayed so you don't have to click books to open. Thanks for any help.
    Len

    Hi!
    I found this topic as a search I did for also including Back and Forward buttons into a pop-up help page and have found it very helpful and useful, thanks.
    I am currently using RH 10, do you know of anything withine RH 10 that can be used to do this for us?
    I was also wondering if you might be able to help with a further query I have regarding these buttons:
    Currently, when a user clicks the help button within the web based software, the topic associated to that page will be displayed in a pop-up screen. The Help Menu is not displayed and there is no URL field displayed with a Back and Forward button. If the user clicks a link from this help page to another help page, there is no way of getting them back to the previous page without closing the page and then clicking the help button again.
    The requirement is to have Back and Forward buttons added to the help pages that remembers the history of where the user has been rather than moving them up and down the contents. (This part of the requirement I have now fixed with the help of your response to this initial query.) -  The buttons need to be hidden or inactive if there is no history associated, then becoming active or seen if the user has clicked a link. See the following:
    Click a help button on a required software page – help detects that there is no history and therefore the Back and Forward buttons are not required and are not displayed/enabled (not active).
    IF the user clicks a link on the displayed help, then on the new page of help the Back button will display/enable but not the Forward button as there is no more help been opened from this page (yet).
    If the user then clicks the Back button, the user is taken back to the previous page that was displayed. However, it notices that there is no more history beyond this page and the Back button either disappears or disables (becomes inactive).
    IF the user clicks another link from the second page, this would be the third page of help displayed. The Back button would be displayed/enabled but the Forward button would not be displayed or set as inactive.
    IF the user clicks the Back button from the third page, page 2 would have both Back and Forward buttons active/displayed.
    This would continue with each link to new pages, i.e. the history would recognise the first opened page of help and recognise that there is not anything in front of the new page that has been opened.
    This logic should also work if the user has opened the full help, selected a topic from the menu and then clicked a link from that opened page. The Back button would be displayed/enabled so that the user would be able to go back to the previous page they were on. Same with the Forward button.
    I hope this all makes sense. I wonder if you might be able to point me in the right direction or if this is something that I should talk to our web developer about?
    Many thanks,
    Nicola

  • Popups how top program the ok and cancel button

    How do I program the ok and cancel button in the popups. I want to add functionality to the existing ok and cancel buttons in the popup
    Thanks,
    Veena

    You can ise a dialog inside the popup and use a dialogListener to check how hte dialog has been closed
    public void handleDialog(DialogEvent event)
      if (event.getOutcome().equals(DialogEvent.Outcome.no))
        setGender(getOldGender());
        // reference to the gender component is from component binding
        // see selectOneRadio above - binding="#{sharedPopup.genderComponent}
        RequestContext.getCurrentInstance().addPartialTarget(getGenderComponent());
    }{code}
    Timo                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Disk Mode? How long pressing the select and play buttons?

    Please, I`ve tried everything to turn it on my ipod since i drop it. It doesn`t appear in itunes or desktop, or my computer. It was with that exclamation mark. I was trying to turn to Disk mode, but it doesn`t go!! For how long should i hold the select and play buttons? I was holding for about 5 minutes until i gave up. Does it take that long?
    Thanks, Juliana

    How to put your iPod into disk mode:
    1) First, make sure that your iPod is mostly charged.
    2) Toggle the "hold" switch on/off a few times.
    3) Hold the "menu" and "select" (center) buttons down together for 7 seconds.
    4) As soon as the Apple logo appears on the screen, let off the menu and center buttons, and immediately click the "select" (center) and "play/pause" buttons until the "disk mode" screen appears.
    If that didn't work, your iPod might be broken.
    But before you presume that, try those four steps above several more times. Sometimes you need to do this step several times before you get the hang of it.
    I hope this helps!
    ~~Kylene

  • How to get the submit and Reset buttons on bottom of the page?

    while viewing a parametric form in the web browser i get SUBMIT
    and RESET buttons on the top of the form which doesnt look good.
    I tried pasting the whole html available by default in the
    Before Form Value(where the submit and reset buttons are
    defined) in the After Form Value property of the report property
    pallette. Though the layout appears as i wanted but its not
    passing the parameters values to the query but generates an
    error " REP-0788 Warning : The value of restricted LOV parameter
    BV_FROM_DATE is not among the selected values.". What can be the
    solution to this problem? Your Help is much appreciated. And
    also the report generated in the Runtime Previewer shows all the
    colors of the fields but its not shown on the web browser where
    can i define them...Your Help!!!!Thank you very much in
    advance..

    when you select 'list of values for the parameters' there is a choice box that says 'restrict list to Predetermined values'. Don't select it. This will solve your first problem.
    Second:When you run the report on the web you must choose ' desformat=htmlcss' then you can display the report as in the preview window. But still you can't see the same view in the web browser on report builder. It is still not good. As I sad before you can see the right view when publishing on the web.

  • How to use the Back and Next navigation buttons on the Skin

    Hi,
    I am a Tech Writer using RH7 for my current project. We are using a skin created by our company. I am not able to include the navigation buttons "Next" and "Previous" in my Webhelp output. They are shown in the skin editor (Picture attached), but not reflecting int he output. Can anyone help me with this. You can also suggest any alternative ways of navigation. "Next" option is mandatory for me.
    Vinay Jaassiel Kankipati.
    Technical Writer

    Hi there
    See if the link below helps with that.
    Click here to view
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • "prev"and "next" buttons no longer work on Yahoo/other slideshows. Still work in Chrome.

    In updating for FFX 6 and 7, the next and prev buttons no longer work in slideshows on Yahoo news and similar sites. Sometimes the status bar shows the links as javascript: void or :null. Sometimes longer links. All javaconsole add-ins are shown as incompatible with these version of FFX.

    i woudnt suggest it, but if your warranty is up it could just be a bad connection from the wheel...what generation do you have? my 4th generation 20 gig ceased to function and it was because somehow one of the cables had a bad connection. i took it to the apple store and they gave me an estimate for something i wasnt willing to pay on a 2 year old ipod so i just winged dissasembleing it and after taking apart the whole thing and reassembling it worked fine.

  • Can't figure out the AC to use for my "Previous" and "Next" buttons

    Hi guys,
    I have a slidshow that stretches over 280 frames which can be
    seen here:
    http://www.paragon-nj.com/newslideshow.html
    or the fla:
    http://www.paragon-nj.com/newslideshow.fla
    There are fade ins and outs and I made buttons numbered 1-5
    where you can skip to each new slide. At present I am trying to
    create the "previous" and "next" buttons but I'm hitting a snag of
    how you make something like this work. The entire AC I have is
    this:
    a.onRelease=function(){
    gotoAndPlay(1);
    b.onRelease=function(){
    gotoAndPlay(55);
    c.onRelease=function(){
    gotoAndPlay(110);
    d.onRelease=function(){
    gotoAndPlay(165);
    e.onRelease=function(){
    gotoAndPlay(220);
    next_btn.onRelease = function () {
    (not sure what to put here) ;
    previous_btn.onRelease = function () {
    (not sure what to put here) ;
    Thanks in advance for all the input
    Wil

    use the _currentframe+55 for your next button and
    _currentframe-55 for your previous button unless the current frame
    is 1 or 55 when you were inconsistant used 54 frames between slide
    transitions.

  • Changing the label of Next button in af:trainButtonBar

    Hi,
    I have a bounded task flow that contains 5 train stops.
    In each step, I’m using the train button component to show the back and next buttons.
    In the third train stop, I need to change the label of the next button to something else (read from a resource bundle if possible) but I need to do it only for this taskflow and for this step only.
    I found that I can do this with the skinning, but this will change it for the whole application no? but I need to do it for this task flow only
    Any hints how can i change the label?
    Thank you

    Hi,
    The task flow I’m implementing is a simple task flow where the user navigates through all the stops. No stop is skipped. So the af:trainButtonBar is very suitable for my case. The only modification I need is to change the text label of the next button from “next” to “a string read from a resource bundle”.
    In the example in the link, we are using command buttons but what I need is to stick to af:trainButtonBar with just changing the label.
    Thank you again

Maybe you are looking for