How to de-activate PO printout when makes changes for PO

A PO has been created, printed out and sent to our supplier. When user make the changes for PO, for example delivery date, then Change output message type will be triggered, and can print a Change To Purchase order (print the PO again with the changes) and send to supplier.
My problem : The requirement is to de-activate this change output message type to be triggerred when the delivery date is changed, so means no Changes to PO will be printed.
How do i control this...
Thanks.

Hi,
You may have to write a output requirement routine and assign the same to the output type in NACE.
But i don't think you will get the old and new data of Purchase order in requirement routine (program : SAPLV61B).  You may have to export the data into memory from either a BADI method or User exit and then import the same in requirement routine.
Regards
Vinod

Similar Messages

  • Re: How do I activate the Adobe pdf maker toolbar for Internet Explorer (Windows 8.1) Please !

    Greetings one and all.
    I would apprecite any advide and/or instructions on the designated subject matter.
    I downloaded the Adobe pdfmaker toolbar and activated it as per the instructions over the internet.
    It seemed to work well until I updagraded from Windows 8 to 8.1 (free upgrade).
    I'd appreciate any added feedback from any/all individuals who have experienced the same issue.
    Many thanks in advance.
    Bill Bakos

    Do you have all the latest point updates for Acrobat XI installed?  11.0.06 was the first point version to support IE11.

  • HT201441 how can i activate my phone when i can't remember the apple ID that was logged inside my iphone?

    how can i activate my phone when i can't remember the apple ID that was logged inside my iphone?

    To find your Apple IDs go here...
    Look up your old and forgotten Apple ID

  • How can I activate my iPad when it has an old iCloud adress that I don't know the password for it?

    How can I activate my iPad when it has an old iCloud adress that I don't know the password for it?

    Click here and reset the password. If you've forgotten the Apple ID, you can recover it from the same site.
    (112195)

  • How to resolve unresolved column error when we change column name in BMM Layer and removed alias in presentation layer

    how to resolve unresolved column error when we change column name in BMM Layer and removed alias in presentation layer

    Looks like the presentation column got Alias before your BMM changes, so in your case renaming logical column and deleting alias is not good to go.
    Keep Alias

  • Please make changes for contact image for for full screen... I bought Iphone Only for full screen contact image so please make changes for full screen contact image...

    Please make changes for contact image for for full screen... I bought Iphone Only for full screen contact image so please make changes for full screen contact image...

    I bought Iphone Only for full screen contact image
    Is that so? So you don't use ANY of the other features of the iPhone? You don't use the internet, apps, play games, make calls, take pictures, or ANYTHING else at all? You just wanted full-screen contact image?
    I don't believe you...
    Please make changes for contact image for for full screen
    Tell Apple: http://www.apple.com/feedback/

  • How can i activate my iphone when its erased and i cannot contact its previous owner?

    I Can't contact the previous owner of my iPhone, and my iPhone is erased. How would I activate my iphone?

    You can't, and Apple won't unlock it for you; the activation lock is an anti-theft measure. You may be able to get a refund.
    (122512)

  • Premiere Pro CS3 - How to Save a Final Project to Make Changes to Afterwards

    OK, I just registered to the forum and this is my first post/question.
    I'm fairly new to Premiere Pro editing
    , and I wondered if there was a way to save the whole edited project/sequence to an external drive in case the client wanted changes to the project after they had viewed it.
    I edit mostly weddings, so the projects are anywhere from 1hr 30m to 1hr 50m. I've watched all the lynda.com tutorials on Premiere, and I know about saving the final project as an ISO image file or as DVD folder, etc.
    Also, I thought I remembered hearing something about being able to 'delete' the footage that wasn't used in the project too, and just saving the edited project somehow? I just thought I'd ask before I go ahead and delete all the footage that pertains to this edit. I've made an ISO file, but it doesn't look like Premiere will load it; nor will it load the video_ts files/folder.
    Anyway, so my questions are:
    1. Is there a way to load an ISO file to make editing changes?
    2. If not, then how could I save the whole project/sequence in order to load it back into Premiere to make any changes to the original edit?
    3. Does anyone here use Premiere for wedding edits? And if so, how do you 'save' projects for the longterm, in case you wanted to make changes to it?
    4. Once you have an ISO image file saved, how do you burn it through Encore? Or am I forced to use the Roxio Creator program?
    I guess that's it for now. I'm sure there are many more questions that I need answered, but I'll save them for later. :-)
    Thanks in advance for any and all suggestions!

    I do a LOT of weddings. Here's the process I've come up with over the years.
    First, make a window dub of the whole thing. Sit down in front of a properly calibrated TV and home theater system and watch it from beginning to end. Make notes on what needs correction (here's where the visible timecode comes in handy) - music selections, audio levels, clips to be trimmed, color corrections, misspellings, etc.
    Then, make those changes.
    Next, author the final DVD for client review. Send that out with appropriate paperwork for a signed approval. Never delete/archive a project without client approval. Now, because some clients would take literally months to approve a project, I instituted a time limit of three weeks. After that, any project is considered approved and may be archived. I make this very clear, with the deadline in writing, when I send out the review sample.
    If the video comes back for changes, things are still in place and I just make the requested changes, sending out another review copy with a two week limit this time. When an approval comes back or if a time limit passes, I finish up the project.
    I make any remaining client copies, plus one copy of the DVD to go on a shelf. I also make an ISO for storage on an internal hard drive, to be moved later to an external hard drive at the end of every year. This gives me two master copies of the finished DVD.
    I then save the project file, music and other audio selections, pictures and graphics to a CD (DVD if more space is needed, but this is rare). I make two copies in case one goes bad, and file them by groom's last name in a small CD file case. The previews and conformed files can always be rebuilt, so there's no need to save them. The actual media can be recaptured from tape, so they just get put on a shelf.

  • How to make changes for a dc which is existing

    Hi
    i have a requirement one of my clients location some developers are developing a DC and left it .
    Now i have to  make the changes of that DC from my location .
    How to do these changes for a dc which is located in the client location from my location .
    Please explain me in steps.
    Thanks in advance.

    hi
    [Learn sap online|http://learnsaponlin.blogspot.com]

  • WhenI make changes to website, published site does not recognize

    Recently I added Pay Pal to my site. Then when I vistied my site I found some of my edited pictures looked as though they had both prior "masks" and current.i.e. oval now looks like oval and square. I even went back and re-ddi the picture edits. They look fine in the edit iweb page, but not the published page.HELP! please.
    Denis

    i wasnt sure to whether to start a new topic or not but i am having the same difficulty. Here is my problem and information. Any help would be brilliant.
    Computer:Macbok Pro, OSX 10.6.8
    iWeb version 3.0.4
    Mobile me
    Everything works perfectly, except one slight glitch when modifying changes in iweb and i publish my saved site to my mobile me hosting (via safari), the published website does not show up like my saved and now published iweb website??
    I contacted mobile me, who said "unfortunately that's not actually a publishing issue. This is going to be more along the lines of your settings within iWeb itself. As a MobileME/iCloud agent, I can only assist you in making sure your website publishes correctly. For assistance with the actual iWeb Application, you will need to contact iWeb support directly."
    This would be fine although i no longer have apple support in my account, so im stuck. Other changes are showing on teh online site? its just one change which is my navigation menu is showing on two lines instead of one as it is on my iweb application. I have had no error messages come through when publishing my site.
    I do not want to re-upload iweb as it works perfectly apart form this, but if it wont change this what will it not change next. Also i have other sites saved on my iweb and i dont want to lose them if u were to install iweb again, not that i'd even know how to.
    Any help would be really appreciated, thanks guys.

  • How to 'open' previously created website to make changes?

    I created a website with iWeb on another computer (I'll call it Computer A) and copied all the files onto an external hard drive. I plugged the external hard drive to another computer (Computer B) and want to edit that website, but there's no 'Open' to select from the File menu in iWeb like on other programs. This can't mean that I can make changes to that website only on Computer A, does it?? How do I access that website on Computer B??

    It is not complicated at all. All you need to do is be aware that your site is created using a domain file and you need to copy that domain file to be able to update your site on any other computer. Then you can just double click on the domain file and open it.
    iWeb is not lame at all. It was designed for its ease of use and one click publishing, however, it only creates html files on publishing. That is just the way it works and has always worked.
    If you want anything complicated, you could consider using packages such as Dreamweaver or an html editor and write your own code.

  • How do i activate my iPhone when it says there is no sim card installed in the iPhone you are trying to activate?

    I just got a new iphone 4 because my old one did work, when i tried activating the new one it give me problems and wont let me do anything on the phone. When i plug it into itunes i get a message there is no sim card installed in this device. Is there anyway i can restore the phone or anything to get it working?

    Then something is wrong with the new iPhone 4. Call AppleCare or make an appointment at an Apple store of there is one nearby.

  • How do I activate my iPhone when it is deactivated?

    I have deleted it from Find iPhone and it says the iPhone will be deleted when it is on WiFi but I am not able to get it on WiFi because it is deactivated.

    Apple ID: How to find your Apple ID - Apple Support
    If you forgot your Apple ID password - Apple Support
    You must recover the Apple id to use the iPhone again and if you have purchased secondhand the iPhone must be released by the original; owner
    See this to understand Activation lock
    Find My iPhone Activation Lock - Apple Support

  • How to get the user created when I prepare for the BD Identity Manager

    Hi I have a query, I need to get a backup database Identity Manager 9.1, I have a problem I do not remember user created to perform the backup, how can you know that I created when I made the installation of Identity Manager, or how can I find

    Hi,
    You can do this trick:
    1) Go to "Deployment Manager" in the Web Console, and open the EXPORT applet
    2) Export the User Defined Fields from the USR form. You don't need any dependence for this.
    3) Open the generated XML with a text editor.
    3) Search for the <SDK_SCHEMA> tag
    This tag contains the OIM schema name, wich shoud be your OIM database user.
    Hope it helps,

  • How to get an email online when showing offline for sending. Solutions on site don't solve the problem.

    How do you get an email account online when it is showing offline for sending. All settings are correct, previous solutions on the site don't help. One account works find the other one receives but doesn't send. No issues with ISP was found. This may have been happening since OS travel. Took a while to realise it was using the other account for sending.

    I just solve the problem. While OS we brought an internet USB and connected to a phone, one or both of these must have caused the problem. When both of the downloads associated with them were deleted the email issue was resolved. regards

Maybe you are looking for