How to deal with OpenCL grey out issue.

First off, I'm not native english speaker.
I have Nvidia GeForce 550 Ti video card, and its support OpenCL v1.1.
I'm also face a "random" OpenCL grey out issue like other people here, but I found the "issue" and how to deal with.
open a command windows (using WinKey + R, and type cmd <enter>)
type "cd C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)" <enter>
type "sniffer_gpu" <enter> -->> to check your GPU has OpenCL in Photoshop?
When GPU is in power-saving mode (core running in 51Mhz, using MSI Afterburner monitor), I running sniffer_gpu, got this report
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>sniffer_gpu
Device: 0000000000328D68 has video RAM(MB): 1023
Vendor string:    NVIDIA Corporation
Renderer string: GeForce GTX 550 Ti/PCIe/SSE2
Version string:   3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
Return code: 1
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>
No OpenCL support
Then, I switch GPU back to normal status (core running at 900Mhz)
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>sniffer_gpu
Device: 00000000001F8D68 has video RAM(MB): 1023
Vendor string:    NVIDIA Corporation
Renderer string: GeForce GTX 550 Ti/PCIe/SSE2
Version string:   3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
OpenCL ok, version=1.1 CUDA 4.2.1
Return code: 3
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>
OpenCL support !!
Nowadays, most of new GPUs were support power-saving, but when sniffer_gpu running at GPU power-saving state, the OpenCL computing report maybe "time-out", cause the detector "guess" the GPU does not support OpenCL. This is why many people says "OpenCL" sometimes work, sometimes grey-out.
I hope this bug can be fixed, or at least people can understand how to "enable OpenCL everytime when you launch photoshop".
Bye.

Do check the following link
http://blogs.oracle.com/soabpm/2010/01/soa_suite_11g_weblogictransact.html

Similar Messages

How to deal with deadlock on wwv_flow_data table when http server times out

There are some threads about a deadlock on the wwv_flow_data table. None of them contain a real explanation for this behaviour. In my case I will try to explain what I think is happening. Maybe it helps somebody who is hitting the same matter.
In my case with APEX 3.2.1 I am navigating from one page to another. Doing this APEX will lock the table wwv_flow_data. As soon as the other page is shown the lock will be released. But now this other page contains a bad performing query (standaard report region). After 5 minutes the http server (modplsql) will time out and present the message "No response from the application server" on the screen. In the meanwhile the query is still running on the database server and the lock stays on the wwv_flow_data table.
Normal user behaviour will be that the user will use the back button to return to the previous page and tries it again to navigate to the other page or
the user will try to refresh the page with the bad performing query.
And voila now you will have a deadlock on the wwv_flow_data table since a second session is trying to do the same thing while the first hasn't finished yet.
How to deal with it?
First of all. Have a good look at the bad performing query. Maybe you can improve it that it will succeed before the http server will timeout.
In my case the 11gr1 optimizer couldn't handle a subquery factoring clause in the best way. After changing it back to a classical inline query the problem was solved.
Secondly you could increase the timeout parameter of the http server. Although this not the best way.
Maybe it would better if APEX in a next version would release the lock on the table wwv_flow_date earlier or do a rollback just before the moment that the http server is timing out.
regards,
Mathieu Meeuwissen

Hello Shmoove,
I saw your reply here and you probably understand the problems the HTTP 100 response may cause.
I am trying to send image that was taken by getSnapshot. The problem is that the server respond with this HTTP 100 message.
I suspect that the reason that my server doesn't recognize the file that I'm sending from J2me is that the "server to client" response to the 100 message comes after the second message of (see what the TCPIP viewer shows down here):
POST /up01/up02.aspx HTTP/1.1
Content-Type: multipart/form-data; boundary=xxxxyyyyzzz
Connection: Keep-Alive
Content-length: 6294
User-Agent: UNTRUSTED/1.0
Host: szekely.dnsalias.com:80
Transfer-Encoding: chunked
400: Client to Server (126 bytes)
78
--xxxxyyyyzzz
Content-Disposition: form-data; name="pic"; filename="david.jpg"
Content-Type: application/octet-stream
400: Connected to Server
400: Server to Client (112 bytes)
HTTP/1.1 100 Continue
Server: Microsoft-IIS/5.1
Date: Wed, 23 Mar 2005 00:47:02 GMT
X-Powered-By: ASP.NET
Any help will be appreciated,
David

Does anyone can help me with Typical issues to deal with when rolling out ERP in Japan?

Does anyone can help me with Typical issues to deal with when rolling out ERP in Japan?

If it were me I would schedule an appointment at the store where you bought it and meet with the Manager of the store in person. Print this post and bring it with you along with your iMac.
And change the password on your Apple ID and then see if there are in purchases in your account that you did not make. If there are then someone did get your ID and password. If not someone got your Credit Card information from somewhere and used it.

Mm issue:-how to deal with gds sent for repairs and again issued for consm

The main problem is that if something come for repairing it increase the stock for one period and decrease the R and M for that period. And when after 4 months when goods are received after repairing it disturbs the R and M expense in another period. And this also disturbs the valuation of the material.
Any one can suggest how to deal with the repairs done to materials without affecting the valuation price of original material.
my points is how everyone in india is dealing with goods sent for repairs outside their company.
what all entries are generated from first receipt of goods in company till good sent for consumption after received from vendor who repaired the goods.
all a/c and mm entries

what we have decided that we would have 2 valuation type
1. sap-domestic :- normal stock
2. sap-use/repair :- repaired items.
All the goods should be received using sap-domestic valuation. from here goods are sent to shop floor. when ever repair is required goods are received in stock thru sap-use-repair at value zero and not moving price specific to sap-use/repair valuation.
so till goods that require repair and that already repaired are kept in stock, they are kept at 2 different values one is zero and other is moving price specific to valuation type sap-use/repair.
now goods are sent for repair at zero value but when these goods are received after repair then value of repair will affect the moving price of valution sap-use/rep.
so this will solve our problem that goods should be received from shop floor to stock for repair at value zero.
how can we achieve this that goods received from shop floor to stock for repair is received at zero value and not moving price specific to valuation sap-use/rep. where we will have do setting in this vaution type or wherever required.
pls send some suggestions on it

In the tracing drop down menu, how come the custom is greyed out and can't be selected? It looks like its disabled!!

in the tracing drop down menu, how come the custom is greyed out and can't be selected? It looks like its disabled!!

cc2014,
Have you selected an image?
Unless a good explanation appears, you may start onthe list below.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

How to deal with file(for example .xml)? what format of dir should be?

I'd like to operate the file in disk, and want to use relative directory?
How to deal with file dir? what format of dir should be?

Hi Kamlesh,
Thanks for your response.
Actually, In the "Process External Bank Statement" window, i see that there are few entries which is for the previous year and which has not been reconciled. I have never worked practically on BRS and hence, i am scared to make any changes in the clients database without being confident on what i am doing. I need to reconcile for one of their Bank a/c for the month of April '08. I have the copy of the statements for the month ending 31st Mar 08 and 30th Apr 08. The closing balances are as below:
31/03/08 - 2300000.00
30/04/08 - 3100000.00
Now my OB for Bank a/c for April '08 in SAP is 2300000.00 Dr.
When i go to External Bank Reconciliation - Selection Criteria Screen (Manual Reconciliation), here are the detail that i enter:
Last Balance: INR -7,000,000.00000 (Grayed out by the system)
Ending Balance: INR -3,100,000.00000 (Entered by me)
End Date: 30/04/08 (Entered by me)
"Reconciliation Bank Statement" Screen opens up and shows the below balances in the screen:
Cleared Book Balance: INR -7,000,000.00000
Statement Ending Balance: INR -3,100,000.00000
Difference: INR 3,800,000.00000
As per the Bank statement, i have found all the transactions listed out here for the month of Apr '08 but, i also found that the open transactions for the previous month from April '08 have been lying in "Process External Bank Statement" window.
Could you please help me solve my issue as to what needs to be done or could you also get me some links from where i can get few documents for processing External Bank Reconciliations?
That will be of a great help for me. I need steps as to what needs to be done first and then the next so that i can arrive at the correct closing balance for the month April '08.
Thanks in Advance....
Regards,
Kaushal

IMac SSD full - how to deal with the two drives

Greetings all,
I've been using an iMac i7 with two drives SSC and HDD. Recently, I've been having issues with the SSD being close to full. I use it for applications only, although some apps need lots of space (iTunes, iMovie, Photoshop, etc.) I use Lightroom and have all the images on the spinning drive. Does anyone know how to deal with this issue? Any way I can move the music from iTunes to the separate drive, or any way to figure out what exactly is using most of my space?
Thanks in advance for your help.
erlkonig

Here's some utilities for analyzing disk space:
DiskInventory
GrandPerspective
OmniDiskSweeper
WhatSize
You might want to consider putting your home directory on the HDD.
How to Move the Home Folder in OS X – and Why
Moving your home folder in OS X

How to deal with hindi lang

I am storing text messages in a PropertyResourceBundle as follows
txt_EmailAdd = {mel ADres
txt_Password = pasvDR
I made the above file in MSword using hindi fonts
The folllowing text is supposed to be in hindi
{mel ADres
pasvDR
but it does not show the text in hindi it still shows in English but when I open the above text file in MSword it shows the text in hindi
Please tell me how to deal with this problem . I hope you people reply as eaarly as possible.
I also have another prob, I am developing a website using jsp+servlet now I have made the above mentioned property file and stored it in c:\tomcat5.0\webapps\emailreadersevice\IndexMessagesBundle.properties
but when I access it from my application's index.jsp file Tomcat gives me following exception
java.lang.NullPointerException
     java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:714)
     java.util.ResourceBundle.getBundle(ResourceBundle.java:579)
     org.apache.jsp.index_jsp._jspService(index_jsp.java:55)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
My index.jsp file is stored in c:\tomcat5.0\webapps\emailreaderservice\index.jsp
In my index.jsp file i have written the following statement to get the IndexMessagesBundle but tomcat gives me the above exception.
ResourceBundle IndexMessages = ResourceBundle.getBundle("IndexMessagesBundle",currentLocale);
Please guide me abt how to go abt it. Also tell me whether I am doing the right thing or not. If no then please tell me the right steps to follow

Hi one_dane
I have made the property file using hindi fonts to type the following thing
{ m e l A D r e s
p a s v D R
No the above values are not place holders Infact in order to type EmailAddress and Password in hindi I had to type the above keys. so when I put system.out.println in my jsp page it does not display any hindi text but the above keys which i used to type in order to display hindi text in my txt file.
But I think i am not going on the right track should i type the unicode values for hindi text which is of the form \udddd in my property file. I have the unicode chart for hindi fonts so I can look up the chart and type appropriate unicodes(\udddd) to display Email Address and Password in hindi. Or am i still not getting how to do it? If not then please tell me how did you create your hindi property file. Is the following that you typed in your property file or is it the output of converting your property file into unicode using native2ascii
title=\u090f\u0926\u0938\u093e \u092a\u0917\u0932\u094d\u0917 \u0942\u093e\u0902\u0942JSP i18n issues
Please reply as soon as possible and hanks a lot for your help.
Eagerly waiting for a reply,
Heti shah

How to deal with "Error 1001. The specified service already exists" when install a service using installer package?

Hi everybody,
I wrote a "Class Library" project which is a service using Visual Stodio 2008 recently, then tried to use a Visual Studio 2008
Setup Project to install it.
Here is what I did for the "Class Library":
1. Finish the program.cs, Service.cs
2. Add Installer
3. Change the serviceInstaller so that "StartType" to be Aotumatic
4. Change the ServiceProcessInstaller2 so that "Account" to be LocalSystem
5.
6. Click in F5 (Start Debugging)
Here is what I did for the Setup Project:
1. Add the exe file built from the "Class Library" project to the Application Folder
2. On the Custom Action Editor, add the exe file from 1 to Install and Commit
3. Change the property of the project so that "RemovePreviousVersion" to be true
4. Click on F6(Build Solution)
Then I tried to run the msi file from the built of the Setup Project. Because I modified the two projects serveral times, I uninstalled the Class Library using "Control Panel->Add or Remove Programs" before I reinstall. Two things I notived:
1. After unstall, the registry was not cleaned up about the installed program
2. After several rounds install/uninstall, I got "Error 1001. The specified service already exists"
My questions are:
1. How to cleanup the registry when uninstall a program?
2. How to deal with the "Error 1001. The specified service already exists"?
3. Did I do anytbing wrong with the "Class Library" or the "Setup Project"?
Thanks a lot!
Helen

Hi Simon, not a problem!
I spent some more time on this and here are few more notes:
it is called Major Upgrade, when you are installing new version of the product upon a previous one and
MSI supports 2 strategies:
Strategy 1. Install a new version and uninstall previous one. (Install a new version right upon previously installed version (file merging is performed based on dll version number) and the delete previously
installed files)
Strategy 2. Uninstall previous version and install a new one (Delete all previous files and install from scratch new files.)
From the first look it seems that 1st strategy is weird and buggy. But, remember, MSI is great because it's transactional!!! That means that if once some of the phases (Installation, Uninstallation, Rollback, Comit) fails, your machine
will be reverted to the previous state and it'll be still functional.
Let's consider both strategies:
Consider you have installed product_v1.msi and you want to install product_v2.msi.
Strategy 1
1. MSI engine copies files from Product_v1 directory to TEMP directory
2. MSI engine merges files based on the assembly version (between v1 and v2)
3. Once merging is completed successfully it removes files in TEMP (RemoveExistingProducts action triggers it) and you got product_v2 installed, otherwise if it fails MSI engine revert machine to V1 and copies previous files from TEMP.
Strategy 2
1. MSI engine tottaly removes all files from v1.
2. MSI engine installs v2 files and if something goes wrong you cannot revert back, because RemoveExistingProducts allready worked out and MSI doesn't have files to revert machine back
I recommend to everybody to use Strategy 1 and leverage MSI transaction functionality. And you can set this strategies by defining sequence of RemoveExistingProducts action. See more info
here. So, I think it's not even a bug in VS as I said in the upper post it is default recommened behaviour.
AND, you got "Error 1001. The specified service already exists"
because if we follow Strategy 1 MSI engine tries to install Windows Service on top of the existing service and OF COURSE it fails MSI engine (StopServices, DeleteServices actions are executed before actual
installation and they look at ServiceControl table). In order to stop service first and delete them you have to fill ServiceContol table of the MSI (and then StopServices, DeleteServices actions will recognize what to they have to stop
and delete), like this:
*clip*clip*clip*
' see http://msdn.microsoft.com/en-us/library/windows/desktop/aa371634(v=vs.85).aspx for more info
' Update the Service Entry to stop and delete service while uninstalling
query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD_Service', 'Service name', '160', '', '1', '"
+ componentName + "')"
Set view = database.OpenView(query)
: CheckError
view.Execute : CheckError
' Update the Service Entry to stop and delete service while installing
query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD2_Service', 'Service name', '10', '', '1', '"
+ componentName + "')"
Set view = database.OpenView(query)
: CheckError
view.Execute : CheckError
*clip*clip*clip*
We can uninstall service first by following Strategy 2, but then we lose transactional support.
So, Simon did I encourage you to change your code a bit?:)
And, btw, if you don't want to change the strategy, please don't rely on SequenceID in MSI table, it can be change, you have to get the at the runtime.
Hope it will help to everybody!
See also more advanced explanation of how MSI works
here.
Truly yours, Marat

How to deal with credentials for external applications using a Java Client/

Hi Guys,
This is the case. I am integrating an external application with an ADF Application. I have implemented some programmatic ViewObjects that are being filled up by a REST Java Client Wrapper. Everything is working fine but the issue is that the credentials the wrapper is using are hard coded inside the java class. I am thinking to ask for the credentials at the beginning of my taskflow and then store them somewhere and use them then to create my client wrapper (passing them in the constructor).
However, I don't know if my approach is good and I would like you to share your experiences or how to deal with this.
Regards

You can use Credential Store Framework to store the credentials securely in the weblogic server instead of hardcoding in the java class.
The Credential Store Framework:
- enables you to manage credentials securely
- provides an API for storage, retrieval, and maintenance of credentials in different back-end repositories
Check the documentation on CSF API -
http://docs.oracle.com/cd/E29505_01/core.1111/e10043/devcsf.htm
Major Steps -
1. Create a credential map and key in em console to store the password (http://docs.oracle.com/cd/E25054_01/core.1111/e10043/csfadmin.htm)
2. Use CSF API to retrieve the stored password
3. In jazn-data.xml give permissions to access CSF key and map

How to deal with special character in source file

Hi experts,
i am doing a file to file scenario in which my source file contains many special characters when i am puting this file into moni its going with the special character .My source file is a fixed length file so in content conversion i have specified the file length but due to these special charcters these field lenght is also varing.So please guide me how to deal with these special characters in sender adapter
regards,
Saurabh

you could try using a Java Mapping to change the encoding manually. For that, set the encoding of the OutputFormat of the XML you'll serialize. Try the following code piece for the mapping (inside a try/catch declaration):
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder documentBuilder = factory.newDocumentBuilder();
Document input = documentBuilder.parse(in);
OutputFormat format = new OutputFormat(XML, "ISO-8859-1", false);
XMLSerializer serializer = new XMLSerializer(out, format);
For more details check this guide:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42

How to deal with images stored in oracle

hi,
can anyone help me to solve this issue please:
in fact i am developping a swing based standalone application based on a TCP/IP client-server connection, so the point is to display on my frame for each student his information and also his personal picture
first step : storing the personal picture into the oracle database from a specefic frame that allows to specify each NEW student's profile and his photo.
step 2: as needed, a specefic frame allows to retrieve all the information related to a student and his photo to ( in a jlabel or other swing componenet)
how to deal with this storing and then the retriving from the oracle DB
any help please!

If I understand well your problem, you need your client java application to store and retrive information from an oracle DB.
This can be done via JDBC.
Here's the tutorial:
http://java.sun.com/developer/onlineTraining/Database/JDBC20Intro/JDBC20.html
Look at
http://java.sun.com/developer/onlineTraining/Database/JDBC20Intro/JDBC20.html#JDBC2018
for storing and retriving binary data (like java serialized objects (Images for example))

How to deal with multiple language SQL script?

Hi All,
We now want to create a SQL script that contains multiple languages(English, Chinese, Japanese), this script need to be run at there different database installed on different OS, for example, Oracle9i on Windows 2000 English Edition/Chinese Edition/Japanese Edition.
If I save the file as ANSI format, this file will only be recognized at local OS(e.g. the Chinese and Japanese character will not be normally displayed on other OS, if I run the script, the CH/JP characters will not be stored normally in DB).
If I save the file as Unicode format, this file can be recognized by all three OS, but Oracle SQL Plus will not recognize it, thus we can't run the script.
Who can tell me how to deal with this issue? Is it possible to save only one script that can run on different language OS?
Thanks,
Spark

Hi,
The ISQLplus supports multiple languages, but there will be following problems for my case:
1.ISQLplus don't support Unicode format script too, so I must save the file as ANSI format.
2.To display the characters normally depends on the database server's platform. I create a script contain three languages with ANSI format in Chinese OS, but if I want to load this script to database server installed on English OS via ISQLplus, the Chinese characters will not be displayed normally too.
PS:
So, I think this is not only related with Oracle but also the Windows OS, it is hard to create one file with ANSI format that can be displayed normally in different platforms.
Thank you all the same,
Spark

How to deal with generated programs in eCATT SAPGUI recording?

Hi experts and professionals,
I am trying to automate testing of our solutions by eCATTs and so far i have not been able to find solution for following problem.
Whole test scenario is very simple:
Check InfoProvider data (query, lookup, listcube,...)
Create DAP on InfoProvider
Archive InfoProvider
Check InfoProvider data (query, lookup, listcube,...) again
Compare results from step 1. and 4. (must match)
Reload archived data
Check InfoProvider data (query, lookup, listcube,...) again
Compare results from step 1. and 7. (must match)
As you can see, one of the required test steps is to check InfoProvider's data in transaction LISTCUBE.
But transaction LISTCUBE generates its program "name" every time it is executed and
I am struggling to find a way how to deal with these generated programs in eCATT SAPGUI recording.
Key is that solution must be generic and work for all SAP BW releases from 7.0 upwards
(having in mind that LISTCUBE can read NLS data from SAP BW 7.3 release).
Error description from eCATT log:
Screen Check Error: Expected Transaction: LISTCUBE, Actual Transaction: LISTCUBE.
Expected Program: GP0KOZE7EFIUBN10MZUFWX90W80, Actual Program: GPBP24INA6VV77SL0XKU5NA642O.
Expected Screen Number: 1000, Actual Screen Number: 1000.
There Is Probably an Error in SAPGUI recording.
ExceptionClass:CX_ECATT_APL_CAPTURE ExceptionId:SCREEN_CHECK_ERROR
RaisingClass:CL_APL_ECATT_LINE_INTERPRETER Include:CL_APL_ECATT_LINE_INTERPRETER=CM00J Line:443
Is there any way how to avoid program check in eCATT script?
Anything that would help me to find solution will be greatly appreciated.
Best Regards,
Igor

Dear Igor,
Your issue is caused by the "screen check" which eCATT processes here.
In General this screen check is a very usefull activity, since is ensures that only those screens are processed by automation, which initially where recorded. This should ensure as much as possible to invoke only intended activities.
Remember, that the driver of the screen flow is still the automated transaction program ( but not the test tool). So application logic decides which screen is send next.
Using screen check the test tool tries to ensure that menu items and buttons and other activities are only automated when the tool "believes" to work on the intended screen.
For generic test scripts and often in context of generated programs the screen check might hurt a bit.
To overcome this, one might try to make the check dynamic (as Sheetal suggests correctly).
If here the name of program cannot be determined for any reason, one can use another method and do following:
- Change the value of ProcessedScreen-Active to 'R'
This will disable/skip the screen-check for this ProcessedScreen.
Sure the solution includes a certain risk, since not checking the correct screen to appear might lead to automation of actions with not desired impact.
Maybe this can improve your solution.
Kind Regards
Jens

How to deal with this problem?

How to deal with this problem?
We plan to use Oracle Coherence (In Memory Data Grid) for a large-scale application. In order to keep the database table data in Coherence caches, we will create all the corresplonding Java objects (entities) and construct the persistence system using JPA/EclipseLink+JDBC. In this way, any in-memory object update will be persisted to the corresponding database tables.
The problem is that some existing application codes are updating these database tables directly now. If the direct-database-table update is not permmited in the persistence environment, we have to discard most of the existing application scripts.
I want to know, in this situation, should I discard most of the existing scripts?
Are there any other solutions?

Allowing writes from both cache & DB is possible with its own set of issues.
The main issue to consider is conflicts from updates on same record via both cache and DB. If your caches are write-through the conflict decreases - but then cache writes become slower. If your caches are write-behind potentially the older cache update will overwrite the latest DB update. Now you are back to Database 101 -- timestamps, versions, etc...
If you use a DB trigger to initiate the resync request you might want to distinguish whether the update has come from the cache-store (in which case, you may choose to do nothing), or if the update was from the 'existing apps', etc...
If you choose to inject the resync logic at the application code level - you have the usual sourcecode issues - can you modify the code, is all the DB code localized, what options do you have to link with Coherence functionality (DLL, external proc, webservice, etc), etc... Naturally though, if you have to make substantial changes to signal a resync....you might consider taking the extra step and change the code to write to the cache.

How to deal with OpenCL grey out issue.

Similar Messages

Maybe you are looking for