How to debug outbound Idoc function module for invoice

I have to debug the outbound IDOC function module and UserExit for invoice message type INVOIC, process code SD09, function module is IDOC_OUTPUT_INVOIC and user exit for the function module LVEDF001.
I tried putting the break point in function module IDOC_OUTPUT_INVOIC and recreate the IDOC using WE19 but it creates the idoc but does not stop at the break point. I have also tried generation of idoc through VF02. It again creates the idoc but does not stop at the function module.
Please let me know if I am missing any thing and not doing it right.
Appreciate your help.
Rohit

Hi Ali,
I faced the same problem. Thing is the break point is not getting triggered when i ran tha IDOC through WE19.
What i have done is i created a project for my exit in CMOD and kept some junk code in the exit and executed it through BD21. Then the Break point got triggered. See if it works.
Regards,
Uday S.

Similar Messages

How to debug Outbound IDoc

Hi Friends,
I want to know how to debug Outbound IDoc .
is there is any tool for debugging outbound idocs
Thanks,
Bhaskar.

hi
Go to tcode WE19. Give idoc number press F8. You will get next screen. There you have push button in tool bar called "INBOUND FUNCTION MOUDLE". Click on it. You will get one pop-up screen.
There give function module name and tick the check box called " Call in debugging mode" and select radio button called "In foreground". Then press ok. It will take you to debugging mode.
Reward if it dose.
Thanks
Siva kumar

How to config Check Digits function module for Student Number Validation

Hi SLCM Experts,
In the SAP-SLCM, How to use check digits function module for validate student number. Just only config it or need to customizing program.
*Any idea to student number validation in SLCM?*
Best Regards,
Suvatchai K.

Hi ,
Can you expalin it further ?
You configure the St. no in piq_matr . And set it as external or internal no. range which suits your business .
What is the validation you are looking for ?
Regards
Gajalakshmi

How to create the INBOUND Function Module for INBOUND IDOCs

Hi Friends,
Can any Suggest me How to proceed to Create an INBOUND Function Module for Processing the INBOUND IDOCS
which are recieved from XI Server ?
I am working in SAP-ISU
Here i will recieve the INBOUND IDOCs for the Meter Reading Orders.
We have a Standard INBOUND FUNCTION MODULE
IDOC_INPUT_ISU_MR_UPLOAD
which Uploads the Meter Reading Results.
I copied the Same function Module into ZIDOC_INPUT_
and working on it.
Can any one suggest me, whether i am going in correct way or not.
In IDOC_INPUT_ISU_MR_UPLOAD Inbound fun module,
BAPI_MTRREADDOC_UPLOAD is used to Update or Insert the Meter Reading Results,
My requirment is to Insert and Update the Meter Reading Orders which are Inbounded from XI.
Can I Use the Same BAPI
BAPI_MTRREADDOC_UPLOAD
to Update the below fields,
EABL-SERNR
EABL-ZWNUMMER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS
EABL-ADATTATS
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Kindly Suggest me,
Thanks in Advance,
Ganesh

Hello Ganesh
I think you are going completely astray with you z-function module for IDoc processing.
If you look at TABLES parameter METERREADINGRESULTS (type BAPIEABLU ) of BAPI_MTRREADDOC_UPLOAD you will find many of the requested fields already:
EABL-SERNR => BAPIEABLU-SERIALNO
EABL-ZWNUMMER =>REGISTER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS => ACTUALMRTIME
EABL-ADATTATS => ACTUALMRDATE
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Field EABL-ZMESSAGE appears to be custom field (at least I cannot find it on ECC 6.0). If this field was added using include CI_EABL then you probably can get these values into the BAPI using the EXTENSIONIN parameter.
Check routine CHECK_UPLOADRECORDS in the BAPI which allows two extension structures:
- BAPI_TE_EABL
- BAPI_TE_EOSB
Not surprisingly BAPI_TE_EABL contains the include CI_EABL.
Regards
Uwe

How to find IDOC Function Module for Basic Type:ORDERS05

Hi,
What is the Transaction Code to locate the Function Module linked to the IDOC Basic Type & IDOC Message Type?
Appreciate Your Help.
Thanks,
Kannan.

Hi Seshu,
Thanks for your reply. While creating a Custom IDOC, How do I link the IDOC Function Module and Basic Type. Appreciate Your Help.
Thanks,
Kannan.

How to find the outbound idoc function module?(Urgent)

Dear All,
How to identify the outbound function module if there is process code assigned to message type.
For partner profile the mesasge type is assigned and idoc type .This is the only information maintained .
Now my question is how to identify the fucntion module which is getting trigger in the system is there any data maintained in the standard table or any t-code .
Points will be rewarded for right answers.
Thank You.
Regards,
Ravi Ganji

Hi,
If u know the message and basictype then we can know the process code for that message type in transaction code WE64.
if we know process codes then we can know the function modules in transaction codes WE41(Outbound process code) and WE42(Inbound process code).
Each process code is attached with a FM...
Reward if helpful
Regards,
Nagaraj

Inbound Idoc function module for Cycle count with msg type WVINVE

Can any one tell me which is the standard function Module which processes Cycle count for message type WVINVE.
My requirement is to setup Inbound Idoc for cycle processing with message type WVINVE.

Hi Mukesh,
Inbound FM is IDOC_INPUT_STORE_INVENTORY , and Process code is WVIN.
Yoou can check this in Tcode WE42 for process code WVIN.
Regards
Srikanth M

How to debug a RFC function module remotely from another R/3 system?

Hi experts,
   I have RFC function module in one R/3 system. I am calling this from another R/3 system that is cross apps (Xapps).
   This function module is Synchronous.
Is it possible to debug this function module from cross apps?
Can somebody give me the steps?
Thanks & Regards
Gopal

Hi Shree,
   Can you explain it bit more?
   Do I have to call the function module with "IN BACKGROUND TASK"?
   Or is it that I have to just put external breakpoint in the function module?
   Please help
Thanks
Gopa

How to debug a remote function module in calling system? Help!

Hi Experts,
 I have a ABAP report (in System A) from where I am calling a remote function module which exists in a different system B.
ABAP Program(System A)<----calls--
RFC(System B)
Can I debug the RFC funnction module in system A using ABAP debugger? In other words if i put a breakpoint on the "call function" statement then in debug mode I want to see that the control is going to system B and I should be able to process the FM code line by line. Is this possible?
Is there any special transaction or settings?
Is there any alternative?
Please help
Thanks
Gopal

hello,
Try this method.
first check whether RFC connection is working b/w 2 systems.
if connection is working, then do like this.
In System B , put endless loop in FM before some main select statement.
like
DATA : v_a TYPE c VALUE space
DO .
 IF v_a = 'X'.
 EXIT.
 ENDIF.
ENDDO.
the above code will be endleep loop.
In system A, when cursor goes to CALL FUNCTION DESTINATION 'XXXXX'.
u shud be logged in system B. the moment control comes to system B.goto tcode SM50 . check ur username . choose that particular checkbox then in menu bar --> program/session --> Program --> Debugging.
i hope it will help u.
try & let us know.
Thanks,
Manjunath MS

How to create a Z Function module for the standard FM VIEW_KURGV?

Hi all,
There is a requirement to the change the functionality of the standard FM VIEW_KURGV. This FM is being used in a Z report. Hence, I have a copied this FM to a Z FM ZVIEW_KURGV after having created the Z Function Group ZV05E. However, there are a number of standard routines which are present in the standard FM VIEW_KURGV which need to be also created in the Z FM ZVIEW_KURGV. Please advise how to proceed.
Thanks and regards,
Anishur

Instead of copyg the std fm to z, do the following,
1. Go to se37 open FM VIEW_KURGV in display mode.
2. Click on the spiral icon on the top.
3. Then in menu go edit->enhancment options -> show implicit enhancement
4. """""""""""""""""""""" kind of lines will appear in the cde, just rt click on the line at the place u want to insert the code and select
enhancement implementation create.
5. Give apropriate name for thi , it will inset a n place to write your code.
This is an std sap methodology and is supported in upgradde also.

How to create ENQUEUE function module for s567 table

Hi Experts,
Anyone Plz tell the steps how to create a ENQUEUE function module for the table s567.
Its somewht urgent, plz help me.
<REMOVED BY MODERATOR>
Mohana
Edited by: Alvaro Tejada Galindo on Mar 10, 2008 4:21 PM

Hi,
You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.
Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.
Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.
Technicaly:
When you create a lock object System automatically creat two function module.
1. ENQUEUE_<Lockobject name>. to insert the object in a queue.
2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.
You have to use these function module in your program.
Hope this will give a basic idea.
Regards
Sudheer

Changing IDOC function module?

Hello everyone!
I would like to make changes to the function module responsible for creating Sales Order Idocs: IDOC_INPUT_ORDERS. How should I go about this procedure? Do I need to copy the existing function module and create a new one? If so, how do I point the IDOC (ORDERS05) to the new function module (for example, ZIDOC_INPUT_ORDERS).
Thanks in advance!
Warm regards,
Glenn

> I would like to make changes to the function module responsible for creating Sales
> Order Idocs: IDOC_INPUT_ORDERS. How should I go about this procedure?
> Do I need to copy the existing function module and create a new one?
(1)This is one possible solution, another one is to use some (2)customer function exits for inbound Idoc these enhancements might be useful: MM06E001, VEDA0001or (depending on platform you are) you might go for e.g. (3)Implicit enhancement. In last two cases you probably dont need to create Z-FM and Z-process code.
> If so, how do I point the IDOC (ORDERS05) to the new function module (for
> example, ZIDOC_INPUT_ORDERS).
1) Copy FM to ZFM
2) Specify characteristic of FM BD51
3) Create Z-inbound process code: WE42 and assign a Z-FM to it.
4) Assign FM to message type WE57
>If you have any other information on how to properly edit the IDOC function
> module (for example, adding ABAP checking codes before populating the IDOC
> fields) it would be great if you could share them!
To add some checks at the beginning you might use all three possible solutions:
(1) in ZFM you might add you code at the very beginning and return some error message
(2) you might use on of the available customer function exits to do some checks
(3) you can do the implicit enhancement and also return some error code at the very beginning of standard FM
In both cases I recommend to go for approach no (2). Useful tcodes: CMOD and SMOD.
Regards,
Jakub

What is outbound function module for IDoc type INFRECMASS01

Hi,
What is outbound function module for IDoc type INFRECMASS01? This is for purchasing info record.
Thanks
Kamal

Hi Kamal,
Have you looked standard program RBDSEINF or transaction code ME18?
This program will call function module MASTERIDOC_CREATE_REQ_INFREC to generate purchasing info record IDoc.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Outbound function module for IDOC WMMBID02

Hi,
Do we have any outbound function module for basic IDOC type WMMBID02 (Stock movements from ext. systems) which has message type WMMBXY.
I searched with hot keys OUTBOUND_WMMBXY in SE37 but unable to find a standard FM. My task is to extend that FM by a user-exit so as to populate my extended IDOC which is of basic type WMMBID02.
Any help would be greatly appreciated.
Regards,
Harsh

Hi Kamal,
Have you looked standard program RBDSEINF or transaction code ME18?
This program will call function module MASTERIDOC_CREATE_REQ_INFREC to generate purchasing info record IDoc.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Sample Outbound Function Module for IDocs

Hello All,
Does anyone have sample code for an outbound function module for an IDoc - they created themselves. Custom or extended? Weblogs, sample code will be useful
ty, dd
Message was edited by:
 Demi Douglas

Hi,
Check this program:
REPORT zmatmas_idoc.
INCLUDE zmatmas_idoc_top.
INCLUDE zmatmas_idoc_selscreen.
INCLUDE zmatmas_idoc_formroutine.
START OF SELECTION
START-OF-SELECTION.
PERFORM get_data.
PERFORM create_idoc.
PERFORM distribute_idoc.
TABLES
TABLES: mara.
Structures
*Header
TYPES: BEGIN OF gs_h_mara,
 matnr TYPE mara-matnr,
 ersda TYPE mara-ersda,
 ernam TYPE mara-ernam,
 laeda TYPE mara-laeda,
 aenam TYPE mara-aenam,
 pstat TYPE mara-pstat,
 END OF gs_h_mara.
*Item
TYPES: BEGIN OF gs_i_makt,
 spras TYPE makt-spras,
 maktx TYPE makt-maktx,
 maktg TYPE makt-maktg,
 matnr TYPE makt-matnr,
 END OF gs_i_makt.
TYPES: BEGIN OF gs_i_mbew,
 lvorm TYPE mbew-lvorm,
 lbkum TYPE mbew-lbkum,
 salk3 TYPE mbew-salk3,
 vprsv TYPE mbew-vprsv,
 verpr TYPE mbew-verpr,
 stprs TYPE mbew-stprs,
 peinh TYPE mbew-peinh,
 matnr TYPE mbew-matnr,
 END OF gs_i_mbew.
TYPES: BEGIN OF gs_i_mvke,
 vkorg TYPE mvke-vkorg,
 vtweg TYPE mvke-vtweg,
 lvorm TYPE mvke-lvorm,
 versg TYPE mvke-versg,
 bonus TYPE mvke-bonus,
 provg TYPE mvke-provg,
 matnr TYPE mvke-matnr,
 END OF gs_i_mvke.
TYPES: BEGIN OF gs_i_mlan,
 aland TYPE mlan-aland,
 taxm1 TYPE mlan-taxm1,
 taxm2 TYPE mlan-taxm2,
 taxm3 TYPE mlan-taxm3,
 taxm4 TYPE mlan-taxm4,
 matnr TYPE mlan-matnr,
 END OF gs_i_mlan.
*Segment & control record
DATA: gs_segment_h LIKE zmara_h,
 gs_segment_i1 LIKE zmakt_i,
 gs_segment_i2 LIKE zmbew_i,
 gs_segment_i3 LIKE zmvke_i,
 gs_segment_i4 LIKE zmlan_i,
 gs_control_rec LIKE edidc.
Internal Table and work area
*Header & Item
DATA: gt_h_mara TYPE STANDARD TABLE OF gs_h_mara,
 gt_i_makt TYPE STANDARD TABLE OF gs_i_makt,
 gt_i_mbew TYPE STANDARD TABLE OF gs_i_mbew,
 gt_i_mvke TYPE STANDARD TABLE OF gs_i_mvke,
 gt_i_mlan TYPE STANDARD TABLE OF gs_i_mlan.
DATA: gw_h_mara TYPE gs_h_mara,
 gw_i_makt TYPE gs_i_makt,
 gw_i_mbew TYPE gs_i_mbew,
 gw_i_mvke TYPE gs_i_mvke,
 gw_i_mlan TYPE gs_i_mlan.
*EDIDD & EDIDC
DATA: gt_edidc LIKE TABLE OF edidc WITH HEADER LINE,
 gt_edidd LIKE TABLE OF edidd WITH HEADER LINE.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
SELECT-OPTIONS: s_matnr FOR mara-matnr OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
*& Include ZMATMAS_IDOC_FORMROUTINE
*& Form get_data
FORM get_data .
SELECT matnr ersda ernam laeda aenam pstat
FROM mara
INTO TABLE gt_h_mara
WHERE matnr IN s_matnr.
IF sy-subrc <> 0.
 MESSAGE e003(zkaren_msgclass).
No data found according to the selection criteria
ENDIF.
IF gt_h_mara IS NOT INITIAL.
 SELECT spras maktx maktg matnr
 INTO TABLE gt_i_makt
 FROM makt
 FOR ALL ENTRIES IN gt_h_mara WHERE matnr = gt_h_mara-matnr.
 SELECT lvorm lbkum salk3 vprsv verpr stprs peinh matnr
 INTO TABLE gt_i_mbew
 FROM mbew
 FOR ALL ENTRIES IN gt_h_mara WHERE matnr = gt_h_mara-matnr.
 SELECT vkorg vtweg lvorm versg bonus provg matnr
 INTO TABLE gt_i_mvke
 FROM mvke
 FOR ALL ENTRIES IN gt_h_mara WHERE matnr = gt_h_mara-matnr.
 SELECT aland taxm1 taxm2 taxm3 taxm4 matnr
 INTO TABLE gt_i_mlan
 FROM mlan
 FOR ALL ENTRIES IN gt_h_mara WHERE matnr = gt_h_mara-matnr.
ENDIF.
ENDFORM. " get_data
*& Form create_idoc
FORM create_idoc .
*Control data
gs_control_rec-mestyp = 'ZKAR_MATMAS_MSG_TYPE'. "Message type
gs_control_rec-idoctp = 'ZKAR_MATMAS'. "IDoc
gs_control_rec-rcvprt = 'LS'. "Partner type of receiver
gs_control_rec-rcvprn = 'T90CLNT810'. "Partner number of receiver
LOOP AT gt_h_mara INTO gw_h_mara .
*Header data.
 gs_segment_h-matnr = gw_h_mara-matnr.
 gs_segment_h-ersda = gw_h_mara-ersda.
 gs_segment_h-ernam = gw_h_mara-ernam.
 gs_segment_h-laeda = gw_h_mara-laeda.
 gs_segment_h-aenam = gw_h_mara-aenam.
 gs_segment_h-pstat = gw_h_mara-pstat.
*Header segment
 gt_edidd-segnam = 'ZMARA_H'.
 gt_edidd-sdata = gs_segment_h.
 MOVE gt_edidd-sdata TO gs_segment_h.
 APPEND gt_edidd.
 WRITE:/ gs_segment_h-matnr, gs_segment_h-ersda, gs_segment_h-ernam,
 gs_segment_h-laeda, gs_segment_h-aenam, gs_segment_h-pstat.
*ITEM 1
 LOOP AT gt_i_makt INTO gw_i_makt.
 IF gw_i_makt-matnr = gw_h_mara-matnr.
*Item data
 gs_segment_i1-spras = gw_i_makt-spras.
 gs_segment_i1-maktx = gw_i_makt-maktx.
 gs_segment_i1-maktg = gw_i_makt-maktg.
*Item segment
 gt_edidd-segnam = 'ZMAKT_I'.
 gt_edidd-sdata = gs_segment_i1.
 APPEND gt_edidd.
 ENDIF.
 ENDLOOP. "at gt_i_vbak
*ITEM2
 LOOP AT gt_i_mbew INTO gw_i_mbew.
 IF gw_i_mbew-matnr = gw_h_mara-matnr.
*Item data
 gs_segment_i2-lvorm = gw_i_mbew-lvorm.
 gs_segment_i2-lbkum = gw_i_mbew-lbkum.
 gs_segment_i2-salk3 = gw_i_mbew-salk3.
 gs_segment_i2-vprsv = gw_i_mbew-vprsv.
 gs_segment_i2-verpr = gw_i_mbew-verpr.
 gs_segment_i2-stprs = gw_i_mbew-stprs.
 gs_segment_i2-peinh = gw_i_mbew-peinh.
*Item segment
 gt_edidd-segnam = 'ZMBEW_I'.
 gt_edidd-sdata = gs_segment_i2.
 APPEND gt_edidd.
 ENDIF.
 ENDLOOP.
*ITEM3
 LOOP AT gt_i_mvke INTO gw_i_mvke.
 IF gw_i_mvke-matnr = gw_h_mara-matnr.
*Item data
 gs_segment_i3-vkorg = gw_i_mvke-vkorg.
 gs_segment_i3-vtweg = gw_i_mvke-vtweg.
 gs_segment_i3-lvorm = gw_i_mvke-lvorm.
 gs_segment_i3-versg = gw_i_mvke-versg.
 gs_segment_i3-bonus = gw_i_mvke-bonus.
 gs_segment_i3-provg = gw_i_mvke-provg.
*Item segment
 gt_edidd-segnam = 'ZMVKE_I'.
 gt_edidd-sdata = gs_segment_i3.
 APPEND gt_edidd.
 ENDIF.
 ENDLOOP.
*ITEM4
 LOOP AT gt_i_mlan INTO gw_i_mlan.
 IF gw_i_mlan-matnr = gw_h_mara-matnr.
*Item data
 gs_segment_i4-aland = gw_i_mlan-aland.
 gs_segment_i4-taxm1 = gw_i_mlan-taxm1.
 gs_segment_i4-taxm2 = gw_i_mlan-taxm2.
 gs_segment_i4-taxm3 = gw_i_mlan-taxm3.
 gs_segment_i4-taxm4 = gw_i_mlan-taxm4.
*Item segment
 gt_edidd-segnam = 'ZMLAN_I'.
 gt_edidd-sdata = gs_segment_i4.
 APPEND gt_edidd.
 ENDIF.
 ENDLOOP.
ENDLOOP. "at gt_h_kna1
ENDFORM. " create_idoc
*& Form distribute_idoc
FORM distribute_idoc .
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
 EXPORTING
 master_idoc_control = gs_control_rec
 TABLES
 communication_idoc_control = gt_edidc
 master_idoc_data = gt_edidd
 EXCEPTIONS
 error_in_idoc_control = 1
 error_writing_idoc_status = 2
 error_in_idoc_data = 3
 sending_logical_system_unknown = 4
 OTHERS = 5.
IF sy-subrc <> 0.
 WRITE:/ 'Error'.
ELSE.
 LOOP AT gt_edidc.
 WRITE:/ gt_edidc-docnum.
 ENDLOOP. "at gt_edidc
ENDIF.
ENDFORM. " distribute_idoc

How to debug outbound Idoc function module for invoice

Similar Messages

Maybe you are looking for