How to find the outbound idoc function module?(Urgent)

Dear All,
How to identify the outbound function module if there is process code assigned to message type.
For partner profile the mesasge type is assigned and idoc type .This is the only information maintained .
Now my question is how to identify the fucntion module which is getting trigger in the system is there any data maintained in the standard table or any t-code .
Points will be rewarded for right answers.
Thank You.
Regards,
Ravi Ganji

Hi,
If u know the message and basictype then we can know the process code for that message type in transaction code WE64.
if we know process codes then we can know the function modules in transaction codes WE41(Outbound process code) and WE42(Inbound process code).
Each process code is attached with a FM...
Reward if helpful
Regards,
Nagaraj

Similar Messages

How to find the names of Function Module used in the program

Hi all,
can you people help me with this issue.I want to the names of all the Function Module used in the program along with their parameters into an internal table.It will be helpful for your suggestions.
Kind Regards,
Edited by: Prasenjit Sengupta on Nov 20, 2008 7:39 AM

Take structure of internal table as
TYPES : BEGIN OF TY_FM,
        FUNCNAME TYPE RS38L_FNAM, "Name of Function Module
        PARAMETER TYPE RS38L_PAR_, "Parameter name
        PARAMTYPE TYPE RS38L_KIND, " Parameter type
        R3STATE TYPE R3STATE,      "ABAP: Program Status (Active, Saved, Transported...)
        STRUCTURE TYPE RS38L_TYP, "Associated Type of an Interface Parameter
        DEFAULTVAL TYPE RS38L_DEFO,"Default value for import parameter
        REFERENCE TYPE RS38L_REFE, "Call by reference
        OPTIONAL TYPE RS38L_OPTI, "Optional parameters
        TYPE TYPE RS38L_TYPE,      "Reference Structure is an ABAP/4 Type
        END OF TY_FM.
DATA : IT_FM TYPE TABLE OF TY_FM WITH HEADER LINE.

How to debug outbound Idoc function module for invoice

I have to debug the outbound IDOC function module and UserExit for invoice message type INVOIC, process code SD09, function module is IDOC_OUTPUT_INVOIC and user exit for the function module LVEDF001.
I tried putting the break point in function module IDOC_OUTPUT_INVOIC and recreate the IDOC using WE19 but it creates the idoc but does not stop at the break point. I have also tried generation of idoc through VF02. It again creates the idoc but does not stop at the function module.
Please let me know if I am missing any thing and not doing it right.
Appreciate your help.
Rohit

Hi Ali,
I faced the same problem. Thing is the break point is not getting triggered when i ran tha IDOC through WE19.
What i have done is i created a project for my exit in CMOD and kept some junk code in the exit and executed it through BD21. Then the Break point got triggered. See if it works.
Regards,
Uday S.

How to find the outbound program for standard IDoc

Hi Folks,
Can anyone tell me how to find the outbound program/tcode for a standard IDoc? For e.g. IDoc - MATMAS05 can be generated & distributed using tcode BD10. Similarly how do I find the outbound program/tcode for any standard IDoc? Is there any procedure to find the same.
I have tried to search based on the package name, but unfortunately I didn't find the information for IDoc: COND_A04.
Thanks in advance.
Somu

You can do following steps if the idoc is generated based on change pointer concept (for masters)
- Identify the message type associated with idoc type (table EDIMSG).
- Function module for generating the IDOC will be available in table TBDME (pass message type as input).
Refer to the standard Outbound IDOC generation program RBDMIDOC for more details.
If the idoc is generated based on the process code concept (transaction data), get the process code information from table TMSG1 (pass message type as input), get the function module associated process code from table TEDE1 (pass process code as input).
Regards, Vinod
P.S: There is no standard way to find out the associated program / Tcode for generating idoc. The above process will be helpful to find out the underlying function modules to generate the idoc. For generating idocs based on change pointers the generic program RBDMIDOC can be used.
Edited by: Vinod Kumar on Jul 13, 2011 2:15 PM

How to debugg the outbound idoc

Hi all,
I am adding one segment standard Invoic02 outbound idoc.
Executing invoice number ,idoc automaticall y trigger and populate the data.
1)problem is my new adding segment is not populated idoc level.
2)I am testind idoc (WE19) showing a 02 error.
3) How to debugg the outbound idoc.
Thanks
Sreddy

Take a look at your outbound processing code (transaction WE41). When you double click on the entry you are using you can find the function module which is used to process the IDOC. Just set a breakpoint at the beginning of that function module and you can debug the creation of your outbound IDOC.
Hope that helps,
Michael

How to find the existing Idoc...

Hi all
How to find the existing Idoc...
in tranction we02..?

Please find the function module that is being used to generate the inbound/outbound IDoc.
Then you go to inside the FM and search for 'CUSTOMER-FUNCTION' in the main program.
This is the place that provided by SAP to modify the IDoc segments.
CALL CUSTOMER-FUNCTION '012'
EXPORTING
 DEKKO = EKKO
 DPEKKO = PEKKO
TABLES
 DEKPO = XEKPO
 DPEKPO = XPEKPO
 DEKET = XEKET
 DH_APPL = APPL.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

How to Debug the Outbound IDOC

Dear SDN Members,
How to debug the outbound idoc please.
Thanks in advance
Yerukala Setty

Hi,
IDocs are processed by a function module, which are mapped against in table EDIFCT. When you process an IDoc in transaction BD87 you can put a breakpoint in the function module and it will stop there.For outbound processing it depends on which program is sending the IDoc. For transactional data like purchase orders, the IDoc is created via RSNAST00 which in turn calls a function module assigned to the processing code (BD41).
Thanks,
Asit Purbey.

How to write the exceptions in function module

dear all,
how to write the exceptions in function modules with example.
thanq
jyothi

Hi,
Raising Exceptions
There are two ABAP statements for raising exceptions. They can only be used in function modules:
RAISE except.
und
MESSAGE.....RAISING except.
The effect of these statements depends on whether the calling program handles the exception or not. The calling program handles an exception If the name of the except exception or OTHERS is specified after the EXCEPTION option of the CALL FUNCTION statement.
If the calling program does not handle the exception
· The RAISEstatement terminates the program and switches to debugging mode.
· The MESSAGE..... RAISING statement displays the specified message. Processing is continued in relation to the message type.
If the calling program handles the exception, both statements return control to the program. No values are transferred. The MESSAGE..... RAISING statement does not display a message. Instead, it fills the system fields sy-msgid, sy-msgty, sy-msgno , and SY-MSGV1 to SY-MSGV4.
Source Code of READ_SPFLI_INTO_TABLE
The entire source code of READ_SPFLI_INTO_TABLE looks like this:
FUNCTION read_spfli_into_table.
""Local Interface:
*" IMPORTING
*" VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
*" EXPORTING
*" VALUE(ITAB) TYPE SPFLI_TAB
*" EXCEPTIONS
*" NOT_FOUND
SELECT * FROM spfli INTO TABLE itab WHERE carrid = id.
IF sy-subrc NE 0.
MESSAGE e007(at) RAISING not_found.
ENDIF.
ENDFUNCTION.
The function module reads all of the data from the database table SPFLI where the key field CARRID is equal to the import parameter ID and places the entries that it finds into the internal table spfli_tab. If it cannot find any entries, the exception NOT_FOUND is triggered with MESSAGE ... RAISING. Otherwise, the table is passed to the caller as an exporting parameter.
Calling READ_SPFLI_INTO_TABLE
The following program calls the function module READ_SPFLI_INTO_TABLE:
REPORT demo_mod_tech_fb_read_spfli.
PARAMETERS carrier TYPE s_carr_id.
DATA: jtab TYPE spfli_tab,
wa LIKE LINE OF jtab.
CALL FUNCTION 'READ_SPFLI_INTO_TABLE'
EXPORTING
id = carrier
IMPORTING
itab = jtab
EXCEPTIONS
not_found = 1
OTHERS = 2.
CASE sy-subrc.
WHEN 1.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno.
WHEN 2.
MESSAGE e702(at).
ENDCASE.
LOOP AT jtab INTO wa.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ENDLOOP.
The actual parameters carrier and jtab have the same data types as their corresponding interface parameters in the function module. The exception NOT_FOUND is handled in the program. It displays the same message that the function module would have displayed had it handled the error.
Or
just have to decide what exceptions u want and under what conditions.
then declarethese exeptions under the exceptions tab.
in the source code of ur function module.
if
like this u can code .
now when u call the function module in tme mainprogram.
if some error occurs and u have declared a exception for this then it will set sy-subrc = value u give inthe call of this fm.
in the fm u can program these sy-subrc values and trigger the code for ur exception.
Please reward if useful
Regards,
Ravi
Edited by: Ravikanth Alapati on Mar 27, 2008 9:36 AM

How to find the standard Idoc for Transfer Order (LT03)

hi
How to find the standard Idoc for Transfer Order (LT03)
How to create the Idoc on LT03
plz help me out
Thank u
Ram

Someone is using FM: L_IDOC_INPUT_WMTORD, message type WMTORD and basic type WMTOID01 in doing this when trying to send an Idoc to an external system when a transfer order for a delivery note is created (LT03). Is it OK
Please reward points

How to raise the exception in function module

Dear abaper's.
I am creating a Function module .In that in' EXCEPTION' Tab i am giving
3 exception .1.NO_DATA_FOUND 2.NO_PRINTER_FOUND 3.SMARTFORM_INTERFACE_NOT_FOUND.
In my coding if this condtion matches i want to raise this exception.how can i do this in my coding .can any one suggest me..
advance thanks,
Warm regards,
Veera

Hi,
if that condition is not satisfied,and u didn't handle that exception while calling function module then in the runtime error u will get the text as the description of the exception in function module definition.
rgds,
bharat.

How to find an include's function module

Hi all,
How can we find the fm of an include?
Thanks.

Hi..
You can find the FM name using the Include name in this way..
For EG:
INCLUDE LSBDCU14. "BDC_OPEN_GROUP
In this SBDC is the Name of the Function Group.
So in SE37 Open this Function Group SBDC and Check the Include where all the Function modules are stoted.
Now u can find the Include . Double click on this to see the FM.
reward if Helpful.

How to automate the creation of Function Module & Class Object (SE24)

Experts,
I have the requirement to automate the creation of any type of programs: ie function module (like how we normally create in SE37 together with the parameters), class object (like how we normally create in SE24 together with attribute & method), normal report (like how we did in SE38), module pool and so on.
For example. I backuped my program into a flat file (the entire source code in txt formal or HTML) through a download program and I need to upload back this flat file into another installation of SAP.
Does SAP provide any predefined FM to cater for the above cases or better still, does anyone know of any upload program which I can use for the above requirement.
Thanks in advance.

Hi Kris, I can't use the transport system as these are 2 separate SAP installation in a different place. The requirement came in the form of creation of program to be able to generate FM/Class/Report on the go.

How to restrict the access of FUNCTION MODULE for others after transporting

A Function module needs to be executed in one server and should be executed when others try to access it.how to restrict the access of FM to one application server after being transported using SM59.

issue resolved

How to change the name of function module ,generated by SMARTFORMS

Dear All,
As you all know, SMARTFORMS generates one function module.
The default name is somewhat like /1BCDWB/SF00000099
instead of, i want to give some specific user defined name.
how to do???

Hi,
I think its not possible to give it a user defined name, but you can assign it to a variable and use that variable name instead.
Please see the code below
Data: V_FMNAME type RS38L_FNAM.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
 EXPORTING
 formname = 'ZSMARTFORM'
 VARIANT = ' '
 DIRECT_CALL = ' '
 IMPORTING
 FM_NAME = V_FMNAME
 EXCEPTIONS
 NO_FORM = 1
 NO_FUNCTION_MODULE = 2
 OTHERS = 3
 IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 CALL FUNCTION V_FMNAME
 EXPORTING
 ARCHIVE_INDEX =
 ARCHIVE_INDEX_TAB =
 ARCHIVE_PARAMETERS =
 CONTROL_PARAMETERS =
 MAIL_APPL_OBJ =
 MAIL_RECIPIENT =
 MAIL_SENDER =
 OUTPUT_OPTIONS =
 USER_SETTINGS = 'X'
 wa_itab1 = wa_itab1
 wa_itab2 = wa_itab2
 wa_itab3 = wa_itab3
 wa_itab4 = wa_itab4
 IMPORTING
 DOCUMENT_OUTPUT_INFO =
 JOB_OUTPUT_INFO =
 JOB_OUTPUT_OPTIONS =
 TABLES
 i_itab1 = i_itab1
 i_itab2 = i_itab2
 i_itab4 = i_itab4
 i_itab3 = i_itab3
 EXCEPTIONS
 FORMATTING_ERROR = 1
 INTERNAL_ERROR = 2
 SEND_ERROR = 3
 USER_CANCELED = 4
 OTHERS = 5
 IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
Regards,
Manish

How to find the Changes like functional location category

Hi Experts,
Can anyone guide me as to how to get the changes in Func loc category made for a func location through front end transactions or through tables when the Change document check box for Func location category has been activated and/or not activated.
Faster response will be highly appreciated and rewarded.
Regards,
Manish

Hi,
Go to that Functional Location, Extras -> Display Changes, that will display all the changes made on that FL.
Regards,
Maheswaran.

How to find the outbound idoc function module?(Urgent)

Similar Messages

Maybe you are looking for