How to debug zrffous_c payment advice script program?

Hi experts,
Payment advice is printing through (ZRFFOUS_C) this program. I want to debug this program .I tried in this way.
Put the break-point in the program and execute then enter the input data and execute then the following message is displayed.
"A:FO:098 29.01.2009 PNB" after this stopped the program .How to debug this program? I want to find these values (REGUP-BELNR, REGUP-XBLNR) in the program .The location where these values selecting in the program?I tried but i didn't get.
please give me the details or give me form name?
please help me in this?

Hi,
Your procedure of debugging is correct.
when you getting the error message , double click on the message on status bar and see wheather it is standard message or
custome message.
you are getting that error because of invalid data so get the valid data from respective Functional consultant
and try to debug again.
You ll not get that error after giving valid data.
Regards,
Pravin

Similar Messages

Where should i include the copied payment advice script ?

Hi experts,
i copied script from std script form (F110_IN_AVIS) . I did some modifications ,now i want to include this script name
(my form name is YPM_F110_IN_AVIS)
in the program.Where should i include (in f110 or somewhere) my script so that when executing the tcode FCH7
modified script will be executed.please give me the steps.pls help me in this.

you got this answer earlier today in another thread of yours....
TA is FBZP.
[url]find the payment advice script form name in fch7[url]
Edited by: Florian Kemmer on Apr 15, 2010 1:20 PM

How to debug the method in abap program

How to debug the method in abap program ?
Could you please give the solution.
Thanks
sai

Hi ,
Place break point at call method .
It takes u in to the method implementation .
Here u can analyse the method implementation ...
Reward if useful
Thanks
Jagadeesh.G

How to debug a authority check in program and a authorisation object in tco

Can anyone tell me how to debug a authority check in program and a authorisation object in tcode
i just want to know the flow of authorisation object in debugging how user is assocaited with authorisation object and roles.
i know if sy-subrc ne 0 is authorisation failed ,so please help me anyone on this.
every time when i put breakpoint ,if its program level only, i am able to decide only through sy-subrc but iam unable o view the flow .

flow cannot be seen, we have to be based on sy-subrc only...
you cannot see the flow in read table... describe table... transfer...
the authorization object will be assigned to the data element, that data element has some realtion to the roles given to the users. So if the role of the user and data element value doesnt match the sy-subrc NE 0.

How to re-generate payment advice

Hi Experts,
We made payment through f-58, spool got deleted. Please advice how to re-generate payment advice/spool.
Thanks,
Ganesh

Hi,
Go to TCode F110 and enter the parameters Run Date and Identification ( of which you want to regenerate), click on printout and enter the job name and execute it.
Next in SM 37 TCode select the job and click on spool , then check the spool and click on click on icon under type column, check the print preview and process it further. Please note you would need to delete the parameters entered in F110 after you are done with the processing to process the next job.
Thanks

How to seperate vendor payment advice form/customer payment advice form?

Hi all,
i was wondering if you could create a seperate payment advice form for
vendors
and
customers.
I used transaction code SE71 to visualize forms. Examples of payment forms for each company code can be found in customization "allocate forms to paying company code".
The challenge that you will have to take is to seperate the payment advice for vendors and the payment advice for customers.
Is that possible in SAP? Or is the payment advice for vendors automatically the same for customers?
What i want to make is the following:
- payment advice for vendors
- payment advice for customers
(So i can make changes in accounting clerk, addres, etc...)
Thanks in advance.
Pamela.

Hello Pamela,
Payment Advice is normally unique for each Payment Method/Company Code.
If a special treatment is required to differentiate between Customers & Vendors (Example - Special information, layout difference, special details) in the Payment Advice, you can always handle it with in the same SAP Script Form that you configure for the Payment Method/Company Code.
Either the field KOART (Account Type) in REGUP enables you to differentiate between Customers & Vendors. Please let me know if you need some examples.
Hope this info answers your question. Please reward.
With Regards
Vijay Gajavalli

How should we delete payment advice?

Hi everyone,
Can anyone please clarify me the following question?
I have created a remittance/payment advice in FBE1just 6 days back. Now, when i am trying to delete this advice system threws message "Pmnt advice XXXXXXXXXXXXXX cannot yet be deleted: Age 6 days, min.period 10 days, Message no. FA038".
we did configuration for payment advice types and Number of Days until Deletion of Payment Advice is 10. But i have many old payment advices and wants to delete all. How should i delete in one stroke? I know it is possible in TC: FBE6 but one by one....
Also, is there any way to be deleted automatically if they are older than 10 days in SAP??
Thanks to all,
Deepu

Hi
In the same transaction code goto the list mode and then give your parameters and then in the edit tab on the menu click on delete on selection. Hope it works. There is another T code FPAVDEL which allows a range by date but sadly I believe it holds good for FI-CA. Not very sure whether it would work for you though.
Rgds

Payment advice scripts

Hi all,
I am trying to prints checks using sap standard form f110_prenum_chck , and when an overflow occurs the contents of the windows i added also appear in the area where the check reads VOID.
Only cheque details are printing alternatively like first then 3rd .and skipping the alternate cheque details like 2nd and 4th .
can anyone suggest me a way to go around this.
Regards
Alok

Hi,
There is customization setting to limit the number of rows that is displayed on a page .
Ask your Functional consultant regarding this.
Regards,
Bharat.

How to debug payment advice program

Hi experts,
iI copied program from RFFOUS_C and named as ZRFFOUS_C.
payment advice is printing through ( ZRFFOUS_C) this program?
If yes how to debug this program ?.I want to konw the values printing in payment advice sheet came from which subroutine.?
I tried but i didn't get.I tried in this way, put the break point in the program and execute then fill the values and execute
then the following message is displayed "A:FO:098 29.01.2009 PNB".
I want to konw document (REGUP-BELNR) YOUR DOCYUMENT (REGUP-XBELNR) about this values came from which sub routine.
If u know anybody pls gime the answer.pls help me in this .

well at first you need to set a breakpoint somewhere in your program.
Then you need to check if your program is customized for payment slips, otherwise standard program will get triggered but not yours.
And finally you probably need to switch on "update task debugging" since output types are quite often processed in update task.

Farsi text :Script F110 for payment advice

Hi to all,
           Please help me in this issue
          i am having a problem in ouput of the payment advice script. the farsi text and english text they are getting mixed up and i have adjusted the farsi text to Right justified but i am not getting required output of alignmnets etc.
Please suggest on this.
Thanks in Advance
K reddy
Message was edited by:
        k reddy

Hi,
We have continuous stationery which is of A4 size
the top half is payment advice and the bottom half is for check
ie the payment advice is printed in the top half and the check in the bottom half.
I want the standard SAP scrip which i can use for such a scenerio.
does this clarify the situation?
Regards

How to debug program or Badi in SRM 7.0 through PORTAL

Hi friends,
        My question is How to debug a Badi or any program in SRM 7.0 through PORTAL . I putted External break point in Badi and following settings has been done in Utilities u2013 Settings u2013 Abap Editor
Front-End Editor (new) - checked
In debugging tab
Users - maintained (entered same user name using in Portal as log on user name)
IP Matching u2013 checked
ABAP Debugger u2013 New debugger u2013 checked
Session breakpoint active immed. - Chcecked
I am not able to debug this badi through Portal and some time after I am getting Time out error whereas Time limit is extended up to 600 seconds . In SRM 5.0 it is working fine .I have SAP ALL authorization   if any other procedure is available or for that any specific role needed then please share with me.
Regards,
Abhijeet
Edited by: abhijeet panse on Jun 29, 2010 8:02 AM

Hi ,
         Thanks Iftekhar and Yramki for replying. I checked everything and we have only one server for Development but still I am not able to debug, I checked AL08, it is showing same server we donu2019t have different application server for development. I donu2019t have any idea about that How to activate debugger for specific user id, please suggest me.
         Parameter set with value rdisp/tpda_for_ext = 1 . In the BADI i putted one infinite loop and then try to debug from the SM50 through Menu program/session u2013 Program u2013 Debugging but from GUI new debugger session is not opening and some time after process has been deleted from the SM50 and I got error message in the Portal.
         Do I need or missing some setting in Portal . Please suggest me.
Regards,
Abhijeet

Payment Advise note program RFFOAVIS

Hi
How do i debug payment advice note program to see if spool is produced?
Thanks
Rendani

Hi,
You do not need to debug, if you want to see if the spool is produced or not. Do not select the "print immediately" check box and execute the program.
If a spool is produced you will be able to see it in T code SP01.
However, if you do want to see this in debug mode, set a breakpoint at the following code:
call function 'OPEN_FORM'
This should take you to the place where the advise is opened and you can check the values being passed.
cheers...

Line items not printed in check printing payment advice

Hi, this is the first time i am implementing check printing module so need some help.
I have used standard print program RFFOUS_C and sapscript form F110_PRENUM_CHEK
when I create an invoice from FB60 and make payments through F-58, on printing it prints the check properly but no line items are displayed.
Please tell me a step by step procedure on how to print the payment advice,i.e, the line items. Is it already in the standard program or do i need to code it. I am interested in the learning also, if anyone can give me details it would be helpful fr me to implement it easily understanding what I am actually doing...
Any help soon is appreciated .

Already everything(line items) exists in the program, if you want to add additional fileds to be displayed that are not existing in your program then you need to sub-routines instead of modifying the standard print program.
Now, you say that your line items are not displayed in your output. For check printing there is some configurations and settings to be done by your functional consultant.. I guess some configuration is missing in your case, that lack the display of line items...check with your functional team on this....(they have to set the lines)
Note: For more info on config check FBZP where form config will be done basing on company code.
Regards,
Sairam

Email payment advice for multiple emails

Hi There,
I have configured the BTE 00002040, every thing works perfectly to send the payment advice to a single email id from vendor master but out client wants a copy of the payment advice also to sent to their group email id, so with the help of our abaper we are trying to hard code the group email id and try to send the email to both vendor email id and group email id but is it nor working.
Can any body tell me how to send the payment advice to multiple emails?
Thank you in advance
Madhu

Thank you Hugo,
We tried this but for some reason it is not working, i know some body else also suggested the same on SDN but no luck.
It works fine for one emaild from vendor master but not when we put the group email id in the program as a hard code.
pl let me know, if you have any other thoughts.
Thanks
Madhu

Payment Advice with Cheque

Hi Gurus,
Please tell me how can i print payment advice with cheque printing?
What configuration needs to be done for that?
Please revert asap.
Thank You

In Automatic payment program configuration(FBZP).
A. PAYING COMPANY CODES-
Payment advise form
B.Payment Methods in Commpany codes-
form for the payment transfer medium.
above two steps , you maintain the same for
F110_PRENUM_CHCK.
then give functional spec to ABAP team .
Regards
Chandra

How to debug zrffous_c payment advice script program?

Similar Messages

Maybe you are looking for