How to define a blank character

hi, talents,
now i want define a blank character for flexible character concatenate,
but when i do like this,
c_space type c value ' '. the space is always elimnated by concatenate statement.
i want to use a blank space fexibly, so i do not want to use concatenate ......separated by space,
so i was wondering if there is a way which i can define a blank character for concatenate or other ways to make it flexible,
thanks guys.
derek

Hi,
use a text element or the constants which holds the space in it as a value.
And then use the concatenate statement by using those fields. U will be getting the space in  b/w.
Regards,
Naresh.

Similar Messages

  • How to define the character set of an outbound EDI batch in BizTalk 2010?

    I have some EDIFACT files with a character set of UNOC though lowercase strings and umlaute should be allowed. These files should be batched in an outbound EDIFACT file. But the batching orchestration of the related send port throws some validation errors.
    If I convert the strings to uppercase characters everything's working fine. So it seems that the outbound batching orchestration uses the UNOA character set internally for the validation of the EDIFACT files...
    How can I change the character set of the outbound batching orchestration in BizTalk 2010? No settings found regarding the character set of outbound batching orchestration in the party and agreement configuration so far. Thank you

    Hi Philipp,
    To define a character set in EDIFACT,
    UNA segment is used. After defining see, How Validation of an EDI Interchange Is Configured and Outbound
    EDI batching in BizTalk Server 
    Maheshkumar S Tiwari|User
    Page | http://tech-findings.blogspot.com/

  • How can I define a default character enconding for Firefox 4?

    Dear Sirs,
    I would like to know how can I change the character encoding of Firefox 4 to Western (ISO-8859-1) and keep that character enconding as the default every time I open Firefox 4.
    I have noticed the every time I change the default character encoding from Unicode (UTF-8) to Western(ISO8859-1) and close Firefox 4, when I open Firefox 4 the character encoding returns to the Unicode (UTF-8) character encoding.
    I would like to keep the Western (ISO8859-1) as the default character encoding. How can I do that?
    Best regards,
    IMeMine

    If the server sends an encoding then Firefox will always switch to that encoding.<br />
    The default is only used on pages where the server does not send en encoding via the HTTP response header and the code doesn't specify the encoding via a meta tag.
    There is usually no need to change the encoding from the default setting Western (ISO-8859-1).
    It is probably better to try an Auto-Detect setting (e.g. View > Character Encoding > Auto-Detect > Universal) if you have a problem on specific websites.

  • How do I delete a character tag so it does not continue to show up in my designer.

    Hello.
    I have deleted a character tag from the catalog but it keeps showing up in the designer and stays associated with any new paragraph tag I try to create. How can I set the character designer to blank?
    Thanks

    >System Preferences>Mission Control>Show Desktop...should be F11:
    If not, change it.

  • How to handle an invisible character in a string?

    Hi,
    I have an interesting situation-
    select bac_person_id, length(bac_person_id) from bkmap_personid_stg where BAC_PERSON_ID like '%27136317%'
    The result is -
    BAC_PERSON_ID|LENGTH(BAC_PERSON_ID)
    27136317|     9
    I don't know what is the invisible character here?
    It is certainly not a blank character as trim is not working -
    select * from bkmap_personid_stg where trim(BAC_PERSON_ID) = '27136317'
    no records!!
    But substr does give me the resullt -
    select * from bkmap_personid_stg where substr(BAC_PERSON_ID,1,8) = '27136317'
    How can I know which is the last character? and How to handle it?

    girija_pathak wrote:
    How can I know which is the last character? and How to handle it?You use the DUMP() function in SQL in order to see the actual content of the column.
    E.g.
    select DUMP(bac_person_id) from bkmap_personid_stg where bac_person_id like '%27136317%'
    The decimal character values will be displayed - enabling you to see where and what control characters characters exist in the string value for that column.

  • How to create a blank theme with no embedded textures?

    Hi,
    I have created a custom theme based on the "White" theme thinking that it was truly blank. But when I save my new theme, I see that it weighs a hefty 11Mb.
    After looking in the package contents, I see that there are marble textures remaining from the White theme. These are used on the default charts.
    I tried creating new default charts that contain none of the textures but they are still saved with the template. I cannot delete these files directly in the package because I get a "Missing File" error when using the theme. Unchecking "Copy theme images into document" in the preferences doesn't change anything.
    My question is: how do you create a truly empty theme with no textures nor images embedded in the package?
    Many thanks for any ideas.
    e)
    Dual 1 Ghz Power Mac G4   Mac OS X (10.4.6)  

    egoes, if you haven't already, you might consult the Keynote User Guide, page 181. The guide talks about how to create new themes, and how to define default chart styles for those themes. The instructions are unfortunately not terribly clear, but it appears that you have to create default charts for each chart type. (I would imagine that the new theme would use old defaults for any charts that aren't newly defined, which would leave in the textures you want to eliminate.)
    If you have no luck following the User Guide directions, and size is important, you might instead start with a smaller theme as your base (e.g., Pinstripe is only 3.1MB, and the default graph fill is a colour fill, not a texture). From this you can strip out the background and other graphics you don't want. With just a blank Master with the background removed, this theme is only 612KB. This is likely the easiest way to produce what you want.
    PowerMac G5   Mac OS X (10.4.4)  

  • How to define reminder letter before due date

    Dear Expert,
    How to define dunning procedure in FBMP (for tcode F150) for this condition:
    1st reminder letter should be generated 7 days before due date.
    Currently the setting for dunning level is 4 (days in arrears: blank, 14, 60, 180)
    But I confuse how to be set in 'Days in Arrears' for the first reminder letter?(I set blank since could not set as negative, e.g -7 (7 days before due dates)
    Kindly advice
    Thank you.

    Hi
    maintain Denning Level like Below
    Days in arrears            0    7  53   173
    Calculate interest
    Print Parameters
    Always dun?
    Print all items
    Payment deadline      7     7     7   7
    hope it will resolve your issue
    satish

  • How to define different styles to different levels of hierarchical titles?

    With difficulty, I found how to define a style for hierarchical titles, i.e.:
    1. First level
    1.1. Second level
    1.1.1. Third level
    etc.
    But all levels will have the same character parameters (font, size, etc).
    What I would like is, e.g.:
    1. First level
    1.1. Second level
    1.1.1. Third level
    In MS Word, it is easy: you define a different style for each level. In Pages, I found no way to do this, and no clue in the user's manual.
    Is it possible (I guess it should be), and if so, how?
    Thanks
    Éric

    You need to use the Styles Drawer. Go to: View > Show Styles Drawer. To define a Style, highlight the formatted text then click the plus sign at the bottom of the styles drawer. To delete a style, secondary click on the style and choose Delete Style.

  • Test for blank character

    My query is how to check for a blank character in a string using the 'substr' function. For example, i use the following statement to read the first 15 characters of the string stored in the variable 'v_line':
    imsi_no:=substr(v_line,1,15);
    and imsi_no is the variable used to store the 15 characters. Please help in solving the doubt as it is urgent.

    also,
    you can loop through the string - in case you want to know where blanks are positioned - and use instr
    e.g. select instr('Hello World',' ')from dual returns 6
    Frank

  • How to define CSV to Document

    Hello experts,
    I'm looking for a scenario "how to define CSV to Document, etc:Order,Quatation..."
    Can someone please send me a sample or a link?
    I tried to use B1i Guide but the information is not enough
    Best Regards
    Nir

    Hi Nir,
    did you set up the File Inbound configuration according to your object definition of the F.AnySystem?
    I suppose you created an F.AnySystem object for the incoming CSV file. The mapping into B1 object is easier, if you use the same local object ID as in B1 (e.g. 22 for puchase order).
    Please open your created scenario with the Graphical scenario Design (SAP B1iSN Tools -> Development Tools -> Graphical scenarion Design) , select your Bizpackage and the Bizstep.
    In the opening window B1iSN DesignTime-Diagramm check, that every element is displayed in "green", especially:
    - Sender ObjectType
    - FileInbound
    If there is any red or yellow color in it, it means that something of your configuration is missing.
    If the FileInbound is not set up correctly, the inbound file will not be recognized as your defined F.AnySystem SenderObjectType.
    Please focus on FileInbound and maintain:
    - ObjMap (Define own, generate own and save own in exact order)
    - Format : Here you need to specify with kind of file is sent towards B1iSN, e.g.:
           SysType = F.AnySystem
           Inbound Formats = DSV
           Character encoding = ISO-8859-1
           DSV Object Identifier = e.g FieldName, if name of File is equal to field Object Id as defined in SenderObjectType
           DSV Object identifier Parameter = this entry needs to fit, what you defined in ObjMap
           DSV Field Delimitter = ;
           DSV Field Wrapper = "
    As last step you need to map the column names of the CSV file into XML format as described in chapter Inbound Format conversion  of B1iSNGuide 04 on page 44 for section DSV.
    Please have a look into the B1iSN guide again, you will find every information needed to tranform an CSV file into F.AnySystem object and into B1 object.
    Best regards
    Bastian

  • How can i set the character set ???

    hello
    now i have the following
    Message msg =
    new MimeMessage(Session.getDefaultInstance(props, null));
    how can i set the character set to be 'windows-1256'
    pleaze help if u can
    thanks very much
    Belal

    You have to deal with the NLS_LANG environment variable,it is defined as NLS_LANG=<Language>_<Territory>.<clients characterset> .
    Where is your oracle client installed? On the the server machine, where the database resides , on another Unix system or is it a Windows client? On Windows NLS_LANG is directly related to the OS settings and stored in the registry, on Unix NLS_LANG is not set automatically and defaults (if not set) to AMERICAN_AMERICA.US7ASCII. If you are working on UNIX, this could be the reason for disordering. I'm not familiar with Chinese, so I don't know the correct setting , but a good approach would be same setting as on the server.
    Metalink note 158577.1 describes NLS_LANG very detailed.

  • AET char type feild max len allowed 60;how to define length above that

    hi experts,
    We have created some z feilds using AET.But certain feilds of character type ,needs the length to be more than 60.But in AET we are allowed to only specify the  length upto 60.
    please let me know how do I define feilds of character type ;having length more than 60.

    Hello Anu,
    While you are creating a field using AET, be sure to click on Enable Expert Mode. Then on the field creation screen, you'll see an input field for entering data element. There you can enter the data element you created as per your requirement and hence use it in AET.
    Please let me know if you have more questions.
    Thanks
    Vishal
    Edited by: Vishal Kesar on Jul 20, 2010 11:17 PM

  • How to define our own selection screen for logical database  in abap-hr?

    Hi Friends,
    Can u please help me
    How to define your own selection screens for  logical database.
    we use to do like(goto->attributes-HRReportcatagerious ).but How to desin using  customer table like t599c, t599f and how to add to my logical database?
    Thanks in advance
    charan

    check out this online help
    http://help.sap.com/saphelp_erp2004/helpdata/en/9f/dba65c35c111d1829f0000e829fbfe/frameset.htm
    Regards
    Raja

  • How to define namespace with one XSD using in two different DB-Locations ?

    I'm not clear,How to define namespace, targetnamespace, schemaLocation or NoNamespaceSchemaLocation
    when using one common schema.xsd-definition
    in two different database-locations for exchange xml-documents?
    when insert xml-document I've got an error ORA-30937
    do you have an good exsample ?
    thanks
    Norbert
    schema :
    <xs:schema
    xmlns="http://sourcehost.com/namespace"
    xmlns:xs="http://www.w3.org/2001/XMLSchema"
    xmlns:oraxdb="http://xmlns.oracle.com/xdb"
    targetNamespace="http://sourcehost.com/namespace"
    xml-document :
    xmlns="http://Sourcehost.com/namespace"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:SchemaLocation="http://sourcehost.com/namespace http://desthost:8080/sys/schemas/PUBLIC/ADRESSEN.XSD">
    SQL> insert into ADRESSEN values
    (XMLType
    (bfilename ( 'XMLIMPORT_DIR', 'adressen.xml')
    , 0 )
    --> error :
    ORA-30937: No Schemadefinition for "SchemaLocation" (Namespace "http://www.w3.org/2001/XMLSchema-instance") in übergeordnetem Knoten "/ADRESSEN"

    Norbert
    The schema location used to register the XML schema with XML DB does not need to be a valid URL for accessing the XML Schema
    I can use the same URL , for instance
    http://xmlns.example.scom/xsd/myXMLSchema.xsd
    on machines dbserver1, and dbserver2. The only reason some people choose to use the hostname / portnumber convention is that this makes it possible to validate the XML Instance documents against the copy of the XML schema stored in the XML DB repository using an external tool like XMLSpy without have to add entries to XMLSpy's OASIS catalog files.
    I am concerned about the message you are getting. That's not correct AFAICT but I'd need to see the complete XML Schema and Instance to be sure.

  • How to define BPC architecture?

    Hi All,
    Iu2019m a BI and BPS consultant and Iu2019m doing a prototype for evaluating BPC for Sales Planning and I need some help.
    Process flow as:
    a.     Extract sales from COPA (amount and quantities);
    b.     Copy Actual to Budget version;
    c.     Create new customers;
    d.     Delete old customers;
    e.     Calculate the seasonality of sales & and adjust budget;
    f.     Load & adjust prices
    g.     Load & adjust sales costs
    h.     Calculate Net Revenue
    i.     Calculate costs
    My file format is as given below:
    Account|Category|Time|RptCurrency|Entity|Customer|Product|Amount|Quantity
    Questions:
    1- There is a specific KF to load quantity or I should use another account? If so how do I load the unit measures?
    2- I tried to load my file in u201CEuru201D but I received an error. The upload only finished OK when I changed the currency to u201CLCu201D. There is any trick?
    3- In customer dimension, I add the sales org. attribute but it didnu2019t work out because a customer can have more than one sales org. There is any way to define a compound key for a dimension?
    4- Where can I find relevant documentation about BPC?
    Thanks for reading my post.
    Regards, Fred

    Hi Shyam!
    Thanks for your answer.
    1. I followed your suggestion and load the data twice (one for amount and another for quantity) but I still have de unit measure problem (KG, TON, etc.). Any suggestion about how to handle this situation?
    2. Yes is easy for me to convert LC in any other currency after the data load. But the problem is that I must load data in multiple currencies (EUR, USD)u2026
    3. No it didnu2019t work out. Let me give you an example:
    Customer       Sales Org            Distribution Channel
    100001      AX01          1
    100001      AX02          2
    When I tried to process dimension I received the following message u201CMember ID must be   uniqueu201D. Any other idea about how to define the compound key Customer and Sales Org?
    Regards,
    Frederico

Maybe you are looking for