How to define Excise tab..?

hi all
Can anybody explain me , while receiving the goods if i click on excise item
In that its showing some details like below
1.Capture excise invoice
2.Capture & post excise invoice
3.No excise duty
4.Only part 1 entry...etc
The above mentioned details were we have configure and assign..
Explain me step by step
thanks
sap-mm

Hi,
It depends upon the Excise Group, you select during Goods Receipt in MIGO.
Go to SPRO > Logistics - General > Tax on Goods Movements > India > Basic Settings > Maintain Excise Groups > Here do settings under subscreen "MIGO settings"
It totally depends on your requirement.
Select No Excise Entry if material is non-excisable.
Select Only Part 1 if in case vendor has not sent the Excise Invoice with materials and sent materials only with a challan.
In this case Excise Invoice is expected and once you will get it then go to J1IEX. Here select Capture Excise Invoice > Goods Receipt and do necessary entries like; Excise Invoice No, date, etc... and check, Simulate and Post Excise Invoice.
Select Capture Excise Invoice if you have received Excise Invoice with materials and your Stores Person is only responsible for making GR and not for posting Excise Invoice (means there is a separate person to post Excise Invoice i.e. Excise Clerk).
After Posting GR Document, go to J1IEX and Here Select Post > Vendor Excise Invoice - Here Enter Excise Invoice No already captured during GR and nd check, Simulate and Post Excise Invoice.
Select Capture and Post Excise Invoice, if if you have received Excise Invoice with materials and Person for posting GR Document and Excise Invoice is same (means there is not any separate person to post Excise Invoice i.e. Excise Clerk).
In this case need not to go to J1IEX.

Similar Messages

  • How to define the "tab" ,"enter" character in a variable(type c)

    I want to use the define the "tab" key and
    "enter" key in a variable(type c),
    But I don't know how to write it :
    for example:
    data: a1 type c(1).
    data: a2 type c(1).
    a1 = ?. " the tab key
    a2 = ?. " the enter key

    Hi, i think joseph fryda gave you the one solution.
    In the server which doesn't support CL_ABAP_CHAR_UTILITIES, here is another solution.
    data:
        C_X1                  TYPE X VALUE '0D',
        C_X2                  TYPE X VALUE '0A',
        C_X3                  TYPE X VALUE '09',
        LC_ENTER(2)           TYPE C,
        LC_TAB                TYPE C.
    enter key
    CONCATENATE C_X1 C_X2 INTO LC_ENTER.
    TAB key
    LC_TAB = C_X3.

  • How to define the tab space in the PL/SQL editor with Oracle Forms 4.5?

    When I use the PL/SQL editor with Oracle Form Builder, I found the tab space is very long that affects my programs readability quite a lot. Then, I tried to use Textpad to type my program. It looks fine with Textpad. However, when i tried to 'cut and paste' my code back to the PL/SQL editor, all tab spaces (approx. 8-character) are detected and the program looks awful again ~~ Would any one help me to solve my mentioned problem?
    Thanks for any advices!

    In 4.5 you cannot change this. In Forms 5.0 and above there is a registry value DE_PREFS_TABSIZE which allows you to set a value for the tabsize.

  • How to define ABC class field in the Customer Master Sales tab

    HI All,
    can any one let me know how to define the new  ABC class in the Customer Master Sales tab like below.
    u2013 A (> 6,000,000 )
    u2013 B (> 1,000,000u20136,000,000 )
    u2013 C (> 100,000u20132,000,000 )
    u2013 D (< 100,000 )
    can any one let me know how to define and path in IMG.
    Thanks in advance.
    kumar reddy.

    In my opinion, you don't have any such std table/view to update ABC Classification field. You might need to update relevant infostructure based on your requirement, such as sales, invoiced, etc..
    Try with following, based on your requirement:
    MC(A
    SIS: Customer,Inc.Orders - Selection
    MC+A
    SIS: Customer Returns, Selection
    MC+E
    SIS: Customer, Sales - Selection
    MC+I
    SIS: Customer Credit Memos - Selec.
    Regards
    JP

  • MIGO excise tabs are there, but duties are not coming & dump V8 , TAXINN

    Hi,
    I am getting issue in the Migo CIN Related
    a) Excise tab is activated in the header and line item.
    b) Automatic tax Excise duty and sales tax is not comming in the MIGO, which is maintained in the FV11 with Tax code V0, j1id settings also done, tax code V0 is maintained in the PO.
    c) While giving the Excise Duty Amount Manually in the Line item excise tab, and saving the MIGO, the message comes Tax code V8 is not defined for Tax procedure TAXINN , Where as so far we have not created tax code V8, and it is not there in the drop down list in FTXP & in PO Invoice tab tax code.
    Message is coming with the dump and document is not saved.
    Awaiting reply , how to pick the Excise details in the MIGO and how can we avoide dump coming for tax code V8, which is not at all created in the system so far.
    manish Gupta

    HI
    For Import it will be MM pricing procedure and vendor master you have to give vendor schema
    as plant,material and vendor is same
    schema even though 2 sachems are same
    so from where you differential your schema.I believe document type for Po and purchasing organization also same for you ,correct if I am wrong.
    Regards
    Kailas Ugale

  • How to create Excise Invoice.

    Hi SD Guru's
              How to create excise invoice and what is the use of this one and sd point what are the setting required.
    Thanks
    Rajendra

    In Indian Manufacturing scenario, Excise Invoice is required when goods move out of factory premises. The process is as under:
    Inquiry / Document type IN
    Tcode: VA11,VA12,VA13. tables VBAK,VBAP
    Quotation / QT
    Tcode: VA21,VA22,VA23. tables VBAK,VBAP
    Sales Order OR
    Tcode: VA01,VA02,VA03. tables VBAK,VBAP
    Delivery LF
    Tcode: VL01,VL02,VL03. tables LIKP,LIPS
    Billing F2
    Tcode: VF01,VF02,VF03. tables VBRK,VBRP
    Excise Invoice
    Tcode: J1IIN
    Configuration of CIN Settings:
    1.1 Maintain Excise Registration
     Logistics general  SAP Ref. IMG SPRO  Maintain Excise Basic setting India tax on Goods Movements Registrations
    1.2 Maintain Company Code Settings
    SPRO   Basic settingIndia  tax on Goods Movements Logistics general SAP Ref. IMG   Maintain Company Code Settings
    1.3 Maintain Plant Settings
    tax on Goods Logistics general  SAP Ref. IMG SPRO   Maintain Plant Basic setting India Movements Settings
    1.4 Maintain Excise Groups
    SAP Ref. IMGSPRO   Maintain Basic setting India  tax on Goods Movements Logistics general  Excise Groups
    1.5 Maintain Series Groups
    SAPSPRO   Basic setting India  tax on Goods Movements Logistics general Ref. IMG  Maintain Series Groups
    1.6 Maintain Excise Duty Indicators
    tax on Goods Logistics general  SAP Ref. IMG SPRO   Maintain Excise Duty Basic setting India Movements Indicators
    1.7 Maintain Subtransaction Type with Text
    India  tax on Goods Movements Logistics general  SAP Ref. IMG SPRO   Maintain Subtransaction Type with TextBasic setting
    1.8 Determination of Excise Duty
    tax Logistics general  SAP Ref. IMG SPRO   Select Tax Calculation Determination of Excise DutyIndia on Goods Movements Procedure
    1.9 Maintain Excise Defaults
    SAP Ref.SPRO   Determination of ExciseIndia  tax on Goods Movements Logistics general IMG   Maintain Excise DefaultsDuty
    1.10 Condition-Based Excise Determination
    tax on Goods Logistics general  SAP Ref. IMG SPRO   Define Tax Code for Condition-Based Excise DeterminationIndia Movements Purchasing Documents
    1.11 Condition-Based Excise Determination
    tax on Goods Logistics general  SAP Ref. IMG SPRO   Assign Tax Code to Condition-Based Excise DeterminationIndia Movements Company Codes
    1.12 Classify Condition Types
    SAPSPRO   Condition-BasedIndia  tax on Goods Movements Logistics general Ref. IMG   Classify Condition TypesExcise Determination
    1.13 Maintain Chapter IDs
    tax on Goods Logistics general  SAP Ref. IMG SPRO   Maintain Chapter ids Master dataIndia Movements
    1.14 Assign Users to Material Master Screen Sequence for Excise Duty
    SPRO   Master dataIndia  tax on Goods Movements Logistics general SAP Ref. IMG  Assign Users to Material Master Screen Sequence for Excise Duty
    1.15 Specify Excise Accounts per Excise Transaction
    tax on Goods Logistics general  SAP Ref. IMG SPRO   Specify Excise Accounts per Excise Account determinationIndia Movements Transaction
    1.16 Specify G/L Accounts per Excise Transaction
    tax on Goods Logistics general  SAP Ref. IMG SPRO   Specify G/L Accounts per Excise Account determinationIndia Movements Transaction
    1.17 Incoming Excise Invoices
    SAPSPRO   BusinessIndia  tax on Goods Movements Logistics general Ref. IMG   Incoming Excise InvoicesTransactions
    1.18 Define Processing Modes Per Transaction
     Logistics general  SAP Ref. IMG SPRO   Define Processing Modes Business TransactionsIndia tax on Goods Movements Per Transaction
    1.19 Define Reference Documents Per Transaction
    tax on Goods Logistics general  SAP Ref. IMG SPRO   Define Reference Documents Per Business TransactionsIndia Movements Transaction
    1.20 Maintain Rejection Codes
    SAPSPRO   BusinessIndia  tax on Goods Movements Logistics general Ref. IMG   Maintain Rejection CodesTransactions
    1.21 Specify Which Movement Types Involve Excise Invoices
    Logistics SAP Ref. IMG SPRO   Specify Which Business TransactionsIndia  tax on Goods Movementsgeneral  Movement Types Involve Excise Invoices
    1.22 Outgoing Excise Invoices
    tax on Goods Logistics general  SAP Ref. IMG SPRO  Assign Outgoing Excise Invoices  Business TransactionsIndia Movements Billing Types to Delivery Types
    1.23 Maintain Default Excise Groups and Series Groups
     Logistics general  SAP Ref. IMG SPRO   Outgoing Excise Invoices  Business TransactionsIndia tax on Goods Movements Maintain Default Excise Groups and Series Groups
    1.24 Subcontracting Attributes
    tax on Logistics general  SAP Ref. IMG SPRO   Subcontrac Subcontracting Business TransactionsIndia Goods Movementsting Attributes
    1.25 Maintain Movement Type Groups
    SPRO   BusinessIndia  tax on Goods Movements Logistics general SAP Ref. IMG   Subcontracting SubcontractingTransactions Attributes
    1.26 Utilization Determination
    SAPSPRO   BusinessIndia  tax on Goods Movements Logistics general Ref. IMG   Utilization Determination UtilizationTransactions
    1.27 Specify SAPscript Forms
    tax on Logistics general  SAP Ref. IMG SPRO   Specify Excise Registers Business TransactionsIndia Goods Movements SAPscript Forms
    1.28 Number Ranges
    SAP Ref. IMGSPRO   Number ToolsIndia  tax on Goods Movements Logistics general  Ranges
    1.29 Message Control
     SAP Ref. IMG SPRO   Message ToolsIndia  tax on Goods MovementsLogistics general  Control
    Regards,
    Rajesh Banka

  • Excise tab not required in MIGO if tax code is different

    Hello,
    There is one business requirement
    we have two special type of TAx codes. If material is maintained in J1ID with chapter id combination.
    then system will propose us the excise tab in MIGO (ECC 6.0).
    My requirement is if suppose we used the "Y1" tax code then system should not propose the excise tab in MIGO.
    what happen stores person does not know for which material he has to capture the excise. every material he has to capture the excise.
    This same material some time we have capture the excise(based on tax code) so that is the reason we have maintained this material in J1ID.
    how to do?

    HI,
    Use two different Tax code. Let's A for used as dedectable Tax(Convet Benefit)
    A should have Coditions like this
    Deduct able tax:-
              JMOP    - IN BED Settoff %
              JEC1     - A/P Edu. Cess Settoff
              JSEP     - IN A/P H Ecess Setoff
              JVRD   - A/P VAT RM Deductable
    Also maintain its settoff 100% for all the condition Type.
    JMX1 --     IN: A/P BED setoff
    JEX1 ---      Ecess Setoff Sta
    JHX1     IN: A/P SECess SOTot
    Now for Non-deductable Tax(Inventrised) suppose ur Tax Code B
    B should have condition Like this
    JMIP - IN BED
    JEC2 - A/P ECESS
    JSEI - H Ecss
    JVRN - Vat
    Now in SPRO --> Logistic General --> Tax on Goods Movements --> Basic Settings --> Determine of Excise Duty ---> Condition Based Excise Determination -->Assign Tax Code to Caompnay Code.
    Here give the Tax Code that CENVAT benefit.
    Regards,
    Pardeep malik

  • How to calculate excise values in case of "No Bond"

    Dear All,
    For Export scenario, BED, ECESS and HrECESS  are calculated as "Statistical" condition types.
    So it will not hit the accounts.
    But in case of "No Bond" export type, Excise values should hit the accounts.
    How to do the configuration for this. Because, we already defined excise related condition types as "Statistical".
    How to manage this situation.
    Please give some suggestions.
    Regards,
    Mullairaja

    Hi
    Even if you select your export type as NO Bond and in your pricing procedure the excise related conditions are statistical even then in excise invoice will generate the accounting document.
    regards
    SAP SD

  • Excise Tab in Migo - Job work of Finished excisable goods

    How to Handle the Finished goods which is to be sent to vendor for job work...
    Since the material is maintained in Ji1d as F RG
    Excise tab is not appears in MIGO agins the Job work PO.
    How to solve the issue?
    regards,
    Sridhar.N

    Hi,
    Exactly you cannot send a finished goods to the subcontractor for work.
    You should rather change the material type.. or you have to create a new material with HALB/ROH material type... then only the process works.
    Thanks & Regards,
    Kiran

  • How to capture excise on base value in miro

    hi masters,
    I am using batch management so in one batch purity defined 90%, when I am capturing excise in MIGO there is no problem its calculated on basis of base value but when i am doing MIRO there is calculating excise on amount of MIRO instead of PO value(base value).
    pl. guide me how to capture excise in MIRO according to MIGO.
    if I am using MRP indicater in migo there is no effect is coming in MIRO.
    Regards,
    Anurag

    Your excise dept. is asking for incorrect process.
    Today you have a material with concentration 90% and hence you wish to value material based on concentration, you will make payment to supplier based on concentration, your entire valuation is based on concentration, but when it comes to excise you want to take credit for overall qty.
    Think of the scenario if this is allowed, and once concentration is 10%, the value as per qty is 1000, excise will be let us say 100, but you wish to make payment to supplier of 100 and also take credit of 100. how can you do this?
    No doubt with some technical development you can achieve this, but process point of view its not correct. If this is allowed than every company will do this and input cost of each company would be as equal to credit of cenvat availed as possible. If you map this as per me you are not mapping correct process.
    Regards,
    Dakshesh

  • Migo is not showing the excise tab - header level and item level

    Hi,
    i have created one PO with excise and i have created MIGO with only capture excise invoice, in MIGO before saving the document system is showing the excise basic, cess and higher education cess in excise tab, header level as well as item level. After saving the document, if i go to dispaly view of the MIGO document system is not showing the header level as well as item level excise amount. The tab itself is not appearing. Can any one help me on this.

    Hi,
    There are two kinds of statuses, system status and user status.
    You can only influence System status if you execute a business transaction that changes the system status.there
    are four system statuses open, In process,Released and Completed.
    User status can be created as additional information to the system status in any numbers.But for this you
    need to define a status profile which would further be assigned to transaction type(header status) and
    item categories(item status).
    The header status is independent of the item status. One exception is the status Completed.
    If all items have the status Completed, the header status is also set to Completed.
    For defining a status profile you need to go to
    SPRO>Customer Relationship Management>Transactions>Basic settings>Status Management.
    Hope this helps.
    Regards
    Sidd

  • How to get shipping tab in PO

    Hi,
    how to get shipping tab in PO? Whether it is based on Import Vendor?
    If it is yes  then how we do find import vendor in  the system?
    Regards,

    Hi
    First I think there is no relation between  Import vendor and shipping data, STO is internal activity and its link with SD Module
    IF you do Sd and MM intragtion properly,shipping data will come on shipping tab
    check following points
    IN supplying plant
    1) material mainatin to same sales organization.distrubition channel and division
    2) To set up sto proocess for plant toplant in a company codecomopany process you need to do following config,
    1. Go to SPRO --- MM --- Purchasing -
    Purchase order -
    Set up Stock Transport order
    2. Firest step is to define shipping data for plants, here you have set rthe data for both the plants who are doing transaction.
    For eg. XYZ1 as supplying plant & ABC1 as receiving plant are the two plants from company code XYZ
    Set data for plant XYZ1 as give the value of sales organization for eg for XYZ company sales organization XYZS will be responsible & other data as distribution channel & division.
    3Create customer master with sales organizatio XYZS and assigen to plant ABC1
    3. Second step is to assign delivery type to supplying plant & document type that should be NL and as per our example it is to supplying plant XYZ1 & doc type UB
    4. Next step is optional whether you want to use one step procedure or two step procedure.
    5. You need to set up master data alaso such as XYZ1 .
    6. You need to set up receiving plant ABC1 as customer in company code XYZ.
    With this minimum requirement you can set up Intercompany process with delivery.
    Process will be as follow,
    1.Create Purchase order with supplying plant as vendor XYZ1 & plant as ABC1 from receiving plant.
    2.Process Outbound deleivery with VL10B
    3. Post Goods Issue from supplying plant.
    4. Post Good receipt in receiving plant.
    Regards
    Kailas Ugale

  • How to define data-sources-alias.xml to use Oracle data source

    Hi,
    I created Oracle jdbc Data Source named "MYDS" in Visual Admin.  I added the alias = MYDS_ALIAS.  I set the Initial Connection to 2.  On the Monitor tab, I see a green line running across the screen.  The datasource MYDS is connected to the Oracle.
    Now, I would like to define "data-sources-alias.xml" to use MYDS.
    When creating data-source-aliases.xml it creates the alias by default on ${com.sap.datasource.default} which is the default DB.
    I followed the link --> How to point data-source-aliases.xml to another Datasource
    and my data-sources-alias.xml is now:
    <data-source-aliases>
         <aliases>
              <data-source-name>$</data-source-name>
              <alias>BRANCH50DS</alias>
         </aliases>
    </data-source-aliases>
    The "EAR generatation has finished successfully", but when "Deploy to J2EE Engine", I got the error below:
    1) How to define data-sources-alias.xml to use Oracle data source?
    2) I found the link (SDA Deployment error) talking about "sda-dd.xml".  How to create "sda-dd.xml" and make it use substitution variables "MYDS"
    Dec 20, 2005 3:53:41 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] INFO:
    [003]Additional log information about the deployment
    <!LOGHEADER[START]/>
    <!HELP[Manual modification of the header may cause parsing problem!]/>
    <!LOGGINGVERSION[1.5.3.7181 - 630_SP]/>
    <!NAME[C:\usr\sap\J2E\JC00\SDM\program\log\sdmcl20051220205339.log]/>
    <!PATTERN[sdmcl20051220205339.log]/>
    <!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
    <!ENCODING[Cp1252]/>
    <!LOGHEADER[END]/>
    Dec 20, 2005 3:53:39 PM  Info: -
    Starting deployment -
    Dec 20, 2005 3:53:39 PM  Info: Loading selected archives...
    Dec 20, 2005 3:53:39 PM  Info: Loading archive 'C:\usr\sap\J2E\JC00\SDM\program\temp\temp856850022Ear.ear'
    Dec 20, 2005 3:53:40 PM  Info: Selected archives successfully loaded.
    Dec 20, 2005 3:53:40 PM  Info: Actions per selected component:
    Dec 20, 2005 3:53:40 PM  Info: Update: Selected development component '50022Ear'/'sap.com'/'localhost'/'2005.12.20.15.53.28' updates currently deployed development component '50022Ear'/'sap.com'/'localhost'/'2005.12.19.18.39.12'.
    Dec 20, 2005 3:53:40 PM  Info: Saved current Engine state.
    Dec 20, 2005 3:53:40 PM  Info: Error handling strategy: OnErrorStop
    Dec 20, 2005 3:53:40 PM  Info: Update strategy: UpdateAllVersions
    Dec 20, 2005 3:53:40 PM  Info: Starting: Update: Selected development component '50022Ear'/'sap.com'/'localhost'/'2005.12.20.15.53.28' updates currently deployed development component '50022Ear'/'sap.com'/'localhost'/'2005.12.19.18.39.12'.
    Dec 20, 2005 3:53:40 PM  Info: SDA to be deployed: C:\usr\sap\J2E\JC00\SDM\root\origin\sap.com\50022Ear\localhost\2005.12.20.15.53.28\temp856850022Ear.ear
    Dec 20, 2005 3:53:40 PM  Info: Software type of SDA: J2EE
    Dec 20, 2005 3:53:40 PM  Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
    Dec 20, 2005 3:53:41 PM  Info: Begin of log messages of the target system:
    05/12/20 15:53:40 -  ***********************************************************
    05/12/20 15:53:41 -  Start updating EAR file...
    05/12/20 15:53:41 -  start-up mode is lazy
    05/12/20 15:53:41 -  com.sap.engine.deploy.manager.MissingSubstitutionException: Missing substitution value for variable [MYDS].
                              at com.sap.engine.deploy.manager.DeployManagerImpl.makeTempEar(DeployManagerImpl.java:3727)
                              at com.sap.engine.deploy.manager.DeployManagerImpl.makeNewEar1(DeployManagerImpl.java:3695)
                              at com.sap.engine.deploy.manager.DeployManagerImpl.deployUpdateAction(DeployManagerImpl.java:523)
                              at com.sap.engine.deploy.manager.DeployManagerImpl.update(DeployManagerImpl.java:512)
                              at com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performDeployment(EngineApplOnlineDeployerImpl.java:196)
                              at com.sap.sdm.serverext.servertype.inqmy.extern.EngineDeployerImpl.deploy(EngineDeployerImpl.java:96)
                              at com.sap.sdm.serverext.servertype.inqmy.EngineProcessor.executeAction(EngineProcessor.java:224)
                              at com.sap.sdm.app.proc.deployment.impl.PhysicalDeploymentActionExecutor.execute(PhysicalDeploymentActionExecutor.java:60)
                              at com.sap.sdm.app.proc.deployment.impl.DeploymentActionImpl.execute(DeploymentActionImpl.java:186)
                              at com.sap.sdm.app.proc.deployment.controllers.internal.impl.DeploymentExecutorImpl.execute(DeploymentExecutorImpl.java:46)
                              at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.executeAction(ExecuteDeploymentHandler.java:83)
                              at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.handleEvent(ExecuteDeploymentHandler.java:60)
                              at com.sap.sdm.app.proc.deployment.states.StateBeforeNextDeployment.processEvent(StateBeforeNextDeployment.java:127)
                              at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:73)
                              at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59)
                              at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.doPhysicalDeployment(DeployerImpl.java:127)
                              at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.deploy(DeployerImpl.java:96)
                              at com.sap.sdm.apiimpl.local.DeployProcessorImpl.deploy(DeployProcessorImpl.java:67)
                              at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
                              at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
                              at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
                              at java.lang.reflect.Method.invoke(Method.java:324)
                              at com.sap.sdm.is.cs.remoteproxy.server.impl.RemoteProxyServerImpl.requestRemoteCall(RemoteProxyServerImpl.java:127)
                              at com.sap.sdm.is.cs.remoteproxy.server.impl.RemoteProxyServerImpl.process(RemoteProxyServerImpl.java:38)
                              at com.sap.sdm.apiimpl.remote.server.ApiClientRoleCmdProcessor.process(ApiClientRoleCmdProcessor.java:81)
                              at com.sap.sdm.is.cs.session.server.SessionCmdProcessor.process(SessionCmdProcessor.java:67)
                              at com.sap.sdm.is.cs.cmd.server.CmdServer.execCommand(CmdServer.java:76)
                              at com.sap.sdm.client_server.launch.ServerLauncher$ConnectionHandlerImpl.handle(ServerLauncher.java:280)
                              at com.sap.sdm.is.cs.ncserver.NetCommServer.serve(NetCommServer.java:43)
                              at com.sap.sdm.is.cs.ncwrapper.impl.ServiceWrapper.serve(ServiceWrapper.java:39)
                              at com.sap.bc.cts.tp.net.Worker.run(Worker.java:50)
                              at java.lang.Thread.run(Thread.java:534)
    05/12/20 15:53:41 -  ***********************************************************
    Dec 20, 2005 3:53:41 PM  Info: End of log messages of the target system.
    Dec 20, 2005 3:53:41 PM  Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
    Dec 20, 2005 3:53:41 PM  Error: Aborted: development component '50022Ear'/'sap.com'/'localhost'/'2005.12.20.15.53.28':
    Caught exception during application deployment from SAP J2EE Engine's deploy API:
    com.sap.engine.deploy.manager.MissingSubstitutionException: Missing substitution value for variable [MYDS].
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
    Dec 20, 2005 3:53:41 PM  Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
    Dec 20, 2005 3:53:41 PM  Error: -
    At least one of the Deployments failed -

    Hi,
    If you remove the $ and braces (as shown below) it will work.
    <data-source-aliases>
    <aliases>
    <data-source-name>MYDS</data-source-name>
    <alias>BRANCH50DS</alias>
    </aliases>
    </data-source-aliases>
    Regards,
    S.Divakar

  • Excise tab in not appearing in GR (new plant configured)

    Hi Experts,
    Excise tab is not appearing while GR posting.
    I have configured a new plant in Sandbox server for testing purpose. Have done all required settings as under:
    - New Plant configured
    - Complete Excise related configuration done in Logistics General-> Tax on Goods Movement
    - PR and PO created successfully. PO  showing correct excise duty, cess, hcess, CST component etc.
    - Material and vendor excise details maintained properly in J1ID
    I guess I have missed excise related config somewhere in SPRO
    please help !

    Hi,
    #Did you have Separate Excise Registration Number for new plant! check & define  in following path:
    SPRO ->> Logistics general ->> tax on Goods Movements->>India ->>Basic setting ->> Maintain Excise Registrations
    ##For new plant, Excise Reg. number need to be assigned to new Plant , check Excise Reg. number assigned to new plant
    SPRO ->> Logistics general ->> tax on Goods Movements->>India ->>Basic setting ->> Maintain Plant Settings)
    ###Check Excise Group created & assigned to new plant in following path:
    SPRO ->> Logistics general ->> tax on Goods Movements->>India ->>Basic setting ->> Maintain Excise Groups)
    For above setting also select check box of EI Capture and select check box of Post EI in MIGO
    Regards,
    Biju K

  • Not getting drill down in Excise Tab during MIGO

    Hello,
    I am not getting drill down in Excise tab during MIGO only "no excise duty" coming. I have configared SPRO - Logistic general - Tax on goods movement - India - Business transaction - Incoming excise invoices - Define processing mode per transaction .Along with maitained J1ID too.
    Can any one have idea on this.

    Hi,
    Check for the -J1IEX -Active for all activities in 
    SPRO - Logistic general - Tax on goods movement - India - Business transaction - Incoming excise invoices - Define processing mode per transaction.
    Then check  for the Support package of -Logistic and accounting.any Notes are missing.
    Properly maitai J1ID  details w.r.t Vendor,materials,excise rates,etc
    Is all  Tax details are showing in your PO invoice Tab ?
    with regards
    Shrinivas gangoor

Maybe you are looking for