How to define ABC class field in the Customer Master Sales tab

HI All,
can any one let me know how to define the new  ABC class in the Customer Master Sales tab like below.
u2013 A (> 6,000,000 )
u2013 B (> 1,000,000u20136,000,000 )
u2013 C (> 100,000u20132,000,000 )
u2013 D (< 100,000 )
can any one let me know how to define and path in IMG.
Thanks in advance.
kumar reddy.

In my opinion, you don't have any such std table/view to update ABC Classification field. You might need to update relevant infostructure based on your requirement, such as sales, invoiced, etc..
Try with following, based on your requirement:
MC(A
SIS: Customer,Inc.Orders - Selection
MC+A
SIS: Customer Returns, Selection
MC+E
SIS: Customer, Sales - Selection
MC+I
SIS: Customer Credit Memos - Selec.
Regards
JP

Similar Messages

  • "Vendor" field in the customer master - XD03

    Hi,
    I would like to know how useful the "vendor" field can be in the "control data" tab of the customer master (and vice versa with the vendor master).
    Is this only for information only or can we use this information to consolidate open items for one particular vendor that is also a customer?
    And how to do this if consolidation is possible?
    Thanks,
    Ronan

    Hello,
    When a Customer is also a Vendor and decided to net of the transactions with each others account in order to offset the entries.
    We need to get USD 100 from Customer A
    We need to pay USD 50 to Vendor A
    Ultimately, we need to get 50 from Customer A (Customer A and Vendor A is the same entity)
    To do this, You need to create Customer A in the Vendor Master and Vendor A in the Customer Master.
    You also need to check "Clear Customer with Vendor" check box in the master data.
    This will result in customer items and vendor items cleared against each other.
    Regards,
    Ravi

  • Populate all address fields to the customer master (DEBMAS06) IDOC

    Hi All,
    We have requirement to extend the customer master IDOC 'DEBMAS06' to add the address fields i.e (ADRC-STR_SUPPL3,STR_SUPPL4,STR_SUPPL5). Can any one tell me the suitable EXITs or BADI's to populate these fields street3, street4 and stree5 to the customer master. Otherwise can any one tell me how to over come this problem.
    Thanks in advance
    K N C

    Dear Matthias,
    I only can confirm the following statements (regarding information from development department):
    - it is not possible with GuiXT
    - it is not possible via a transaktion variant
    - there exists no screenvariant with this functionality
    ->  modification is the only possibility.
    Regards,
    Andreas

  • How can we add new fields in item customer detail B tab in VA01/VA02/VA03?

    Hi all,
    Anyone can suggest me, how we can add fields in item detail B tab of VA01/VA02/VA03 transaction.
    1) How we can find the screen no and how we can add fileds in it
    2) where we have to write the logic for these fields ( I mean in which include)
    3) Is there any user exit or BADI for this
    4) what is the procedure to do this enhancement .
    5) How we can enhance menu bar
    i am using ECC 6.0 version.
    Please guide me in this .
    Thanks in advance.

    Hi,
      You do not have to do extra coding for this. Just append the extra fields in the table VBAP and include these in the screen 8459 (Additional data A) or 8460 (Additional data B) of program SAPMV45A.
    https://forums.sdn.sap.com/click.jspa?searchID=12244867&messageID=1939475
    Regards
    Kiran Sure

  • How do I add new fields to the 'Customer Data' tab under the BP

    I had previously found a screen in the SAP GUI to add fields so that they would show up on the 'Custmer Data' tab under the Business Partner screen. I thought it had been somewhere in se80 but I cannot find it again. Does anyone know where this is? Thank you!

    Hi Mark,
    You can do this using transaction EEWB. This is the Easy Enhancement Workbench.
    within this, you can use the wizard which will guide you through a step by step process to add the fields you need. Basically, there are 2 ways to add new fields  :
    1. Add new fields - this adds fields to table BUT000, but places the fields on a new tab called 'Customer Data'
    2. Add new attributes table - creates a new table and links it to BUT000 using the partner number.
    Hope this helps you.
    Cheers,
    Rishu.

  • Adding new field to Customer master sales data area sales tab

    Hello everyone,
    I am new to module pool so seeking some help from experts here.
    I have a requirement were in I have to add a new field to the customer master (VB02) sales area data sales tab.
    I found that there is no screen exit.Is there any other way of doing it?
    could you please provide me with a step by step procedure of doing it.
    With Regards,
    Karishma.

    Hi,
    How did you look for screen exit? Have you also tried it in BADI? 'Coz normally, adding custom fields to a standard screen has to be implemented in exits.
    I haven't worked with VB* screens yet so I can not give you a some possible exits. But you can do some debugging. I think there's an available code in the net that searches for exits/screen exit (ask Mr.Google). You can also ask him how to search BADI in debugging mode. I remember it's TCode SE24 then look for cl_exithandler class, get_instance method. Then look for exit_name variable.
    Hope this helps.

  • Report to fetch the text information from customer master sales data

    Dear Experts,
    We have come up with a requirement where the business want a report/list of the customers for whom a particular text is not maintained in customer master -sales data.
    There are many Z text id are configured and are maintained in Sales data- extras- text. In addition, business also need some key fields from the customer master such as name, city, delv plant, payment terms, sales off, sales grp etc.
    I could not get any standard table where the text is maintained with the customer numbers. Table STXH can give the customer numbers for a particular text id type but what is maintained against the given text id is not fetched from the table.
    So we need the valuable inputs to realize the requirement.
    As an proposal, we are aiming to develop custom Z report with the FM READ_TEXT to get the text information with the customer no ( object type KNVV and text id ). But for the additional information, what should be the actual logic for fetching the data. say if this FM is used, what should be the sequence of the logic and ideal selection parameters.
    In addition, we aim to use BAPI BAPI_CUSTOMER_GETDETAIL2 to fetch some of the customer ifnormation but many fields are not found in this . can we use some other bapi which can provide the complete general/sales data of customer ( delv plant, sales off, sales grp, custo grp, incoterms, payment terms etc)
    Kindly suggest accordingly.
    Many thanks in advance.

    Hi Dharmendra Kumar,
    I guess the best would be to check in ABAP General forum on the READ_TEXT sequence/ logic etc..
    For customer details, the available BAPIs are:
    BAPI_CUSTOMER_GETDETAIL
    BAPI_CUSTOMER_GETDETAIL1
    BAPI_CUSTOMER_GETDETAIL2
    However, you might have to check classes in SE24 to find any existing classes and its method yo give you all the information of a customer. Also check this thread: [BAPI for customer details like in IDoc DEBMAS;
    Regards,
    Raghu.

  • Workflow  keying off changes in the customer master

    I have created a workflow that triggers  off of changes to a particular field in the customer master.
    Everything works great.. However, users are requesting to see the old value as well as the newly changed value.
    The event container doesn't seem to hold the previous changed value, only the new one.
    It does have have the object key and the event time and date.The only option I see is to have my custom method go back and read the change doc table (cdhdr & cdpos) in and around the event time for the object key ( kna1) to retrieve the old value.
    Any suggestions are appreciated.

    Hi,
    The address data is always saved with the dates (look in table adrc). SO maybe you can retrack the original address.
    Why do you print again an invoice. And if you do i think it is alright when it is sent to the current address and not to the old address.
    Gr., Frank

  • Documents tab in the customer master - ECC 6.0

    Hi
    Whilst working on ECC6.0, we notice that there is a documents tab in the customer master sales area data....
    Could someone please help me with the functionality of this particular tab and its relevance please?
    Cheers,
    MR

    Hi Rithvika /Arijeet,
           Thank you for your replies. If as Arijeet, mentioned, it is for output conditions... Could you please let me know how we configure these output condition types -
    a) Is it done only on the customer master ?
    or
    Does it involve the output det. proce. where in we use the condition technique?
    If done only thru the a/c grp and customer master, could you please help me out with how we configure it?
    b) Could you please let me know the business scenario in which this document tab on the customer master sales area data comes into force?
    I would appreciate your help on this.
    Cheers,
    MR

  • How to define "C" class material in material master

    Hello,
    I want to take the report of "C' class material procured for the business.
    please let me know where we need to mention "C" class in material master and the procedure.
    Regards
    Rifaie M

    In the MRP1 view of material master, you will find the ABC indicator field at the plant level.
    You can mention C class there.
    Regards,
    Aroop

  • How to find out the user who has created  a new field in the custom table.

    How to find out the user details who has created  a new field in the custom table.
    Thanks,
    Joan

    Hi Jesudasan ,
    You can know the user details with version management.Please find the
    below procedure to know.
    Go to table->Utilities tab->version->Version management->Compare the previous one .
    Hope this solves the issue,Let me know if you have any issues.
    Thanks,
    Rajani

  • How to add a Custom field in the Standard SAP Sales Order main screen

    Dear Experts,
    We have a requirement of adding a Custom field in the Sales Order screen. I know how to add the Customer field in the Additional data B tab of the Sales Order Header Screen as that is the screen user exit provided by SAP. Can someone tell me how to add the Custom field in the Sales Order main screen. Program Name - SAPMV45A and Screen Number - 4001. What is all I need to take care.
    Thanks,
    SNK.

    I have not added the Custom filed in the main screen and added in the Additional data B screen. So closing the message.

  • How to import a class not in the package from a package

    how to import a class not in the package from a package?

    http://java.sun.com/docs/books/tutorial/java/interpack/usepkgs.html

  • I am creating a web form from a template and I need to change a field. It is just a text field at the moment but I need to change it to a field that the customer can fill in. How do I do this?

    I am creating a web form from a template and I need to change a field. It is just a text field at the moment but I need to change it to a field that the customer can fill in. How do I do this?

    See this thread:
    http://answers.acrobatusers.com/Is-add-instructional-text-text-field-disappear-clicked-q19 5078.aspx

  • How can I format a field in the form creator?

    How can I format a field in the form creator? It's putting the same text in all the fields within a table. I want each field within the table to have different text. As soon as you click out of the table, all the text is the same.
    I even changed the fields from a text box to a drop-down list so a person can make their selection, which will be a quantity from 0-9. There are two of these such fields. You make your selection in each, click off the table and both fields show whatever I selected in field 1. The original Qty I selected in the bottom field was a 5 but it changed it to whatever is in the top field on it's own. I've added a screen shot.

    This behaviors usually happens when you create the fields but  a copy paste command from one of the fields. The copy paste command assumes that your intentions is to maintain a copy of the field in two separate locations (e.i, a form field  "company name" printed in each and every page of a multi-page form document.
    Go to the properties fields of each field and make sure  to assign unique form field  names.

Maybe you are looking for