How to define Maintainance fees in REFX?

Hi All,
There is Lease Out Contract. How can we maintain the discount percent in the contract condition?
Information :-
Detail : (per room)
            Price: 2.000.000 VND/Month
            Discount : 3%
            Net Amount : 2.000.000*(100%-3%)= 1.940.000 VND/Month (A)
            Fee    : 300.000 VND/Month (B)
            Number of Room : 1 (C)
            Fee is free for 8 month when contract is signed.
Summarize : (Per room)
            Amount : (A+B)*C =2.240.000 VND
            VAT (10%)        = 224.000 VND
            Gross Amount : 2.464.000 VND
How to configure it REFX?
Thanks in Advance

Hi,
I will try to help you in the configuration. Before that may i know the following details.
1. What entries you want to post in to the customer ledger.
2. Do you want to show discount as gross or net?
Thanks,
Bala.

Similar Messages

How to define keys in target DSO

hi gurus!!
..can you please extrapolate on how to define key in target DSO and transformation logic.. (please refer to below discussion from for scenario from earlier posting)
thanks in advance
I have data from 3 datastore objects which I need to update one infocube. However, I need the data to come together to form one line per record. I've found that if I update the cube directly from the 3 DSO I get 3 lines rather than one, and if I update them all to a DSO and then to the cube, the same thing happens because I take the data from the change log.
If I go via an InfoSet, I can not do a delta upload to the cube.
I need this to run a min of once an hour.
Any tips or advice would be greatfully recieved.
Thanks
Alice
answer:::::
You need to have an common key fields set in all of the three transformations.
In your case it is probably:
The key in target DSO is: k1..k3
ODS1 - updates key k1, leaves k2, k3 empty
ODS2 - updates key k2, leaves k1, k3 empty
ODS3 - updates key k3, leaves k1, k2 empty.
If you have it that way, you will end up with three records, instead of one.
k1, empty, empty
empty, k2, empty
empty, empty, k3
To resolve this, all of the source DSO must be able to determine and set a common key part in the transformations.
Target ODS:
Key K1,
ODS1 - updates K1, key figures/characteristics from ODS1
ODS2, updates K1, key figures/characteristics from ODS2
ODS3, updates K1, key figures/characteristics from ODS3
result:
K1, key figures/characteristics from ODS1, then
K1, key figures/characteristics from ODS2 - result is - previous record's key is overwritten, but the key figures/characteristics are mapped to the correct infoobjects (depending on how you set the transformation....)
K1, key figures/characteristics from ODS3 - as for ODS2.
The final result:
K1, key figures/characteristics from ODS1, key figures/characteristics from ODS2, key figures/characteristics from ODS3.

Hi,
As thomas said you maintain your keys same as your source DSO's in the target DSO.This is how the procedure goes when no specification for the keys are given.So maintain same keys which are in the sources.
Regards
Karthik

How to define GL account for House Bank?

Dear Friends
I maintained house bank sbi, house bank account and GL for house bank in FBZP. Then I maintained a Check lot in FCHI. When I was running F-58 and selected Check lot no as 8 as I maintained in FCHI, I am getting the following error:
No G/L accounts are defined for bank SBI and payment method C
Message no. F5459
Diagnosis
For the specified payment method C, in combination with house bank SBI, you have not specified a G/L account to which the posting is to be made under bank selection (Goto -> Account Determination).
System Response
Input not accepted.
Procedure
Correct your entries if they are incorrect. Otherwise ensure that the missing bank selection details are added.
How to define GL for a Bank? Wht is T code?
Thanks
Chandra

Hello,
In FBZP assign payment method C to the bank account. and check while creating the bank account are give main bank account in FI12, account id.
Hope this is clear, in case of problem revert me back.
Regards,
Sankar

How to define reminder letter before due date

Dear Expert,
How to define dunning procedure in FBMP (for tcode F150) for this condition:
1st reminder letter should be generated 7 days before due date.
Currently the setting for dunning level is 4 (days in arrears: blank, 14, 60, 180)
But I confuse how to be set in 'Days in Arrears' for the first reminder letter?(I set blank since could not set as negative, e.g -7 (7 days before due dates)
Kindly advice
Thank you.

Hi
maintain Denning Level like Below
Days in arrears 0 7 53 173
Calculate interest
Print Parameters
Always dun?
Print all items
Payment deadline 7 7 7 7
hope it will resolve your issue
satish

How to define shift

how to define shift?

Do the following setting in spro for Shift:
Define Shift sequence in SPRO(Production>>> basic Data>>>work center>>>capacity planning>>>Availabale Capacity>>>define shift sequence)
In this step you define the following:
Grouping
Using the grouping you can create shift sequences and shift definitions for special areas (for example, different plants or different areas of a plant) and when maintaining the available capacity choose from between work centers.
Work break schedule
Here you define parameters that describe the individual work break schedules in more detail, as for example:
Start
Finish
Break times
Shift definition
Here you define the parameters common to several work centers that describe the individual shifts in more detail, for example:
Start
Finish
Break times
Validity period of a shift
In Logistics (LO) you can reference daily work schedules from the personnel system (HR). If you reference a daily work schedule in LO from HR and this is changed in HR then this change has a direct effect on changes in LO.
Shift sequences
You can assign the shift sequence of a capacity category as the available capacity at the work center.
You define a sequence of shifts per weekday. The shift sequence represents a collection of shift definitions.
In capacity planning the system uses the predefined values from the shift definition to determine the available capacity of a work center.
The system calculates the following values:
the capacity
the actual operating time for the capacity
Standard settings
The SAP standard package contains settings for various shift sequences.
Activities
You should define the following:
1. groupings
2. shift sequences
3. shift definitions
4. work break schedules
Assign this in work center capacity tap, under intervals and shifts.
Regards
PP

How to define CSV to Document

Hello experts,
I'm looking for a scenario "how to define CSV to Document, etc:Order,Quatation..."
Can someone please send me a sample or a link?
I tried to use B1i Guide but the information is not enough
Best Regards
Nir

Hi Nir,
did you set up the File Inbound configuration according to your object definition of the F.AnySystem?
I suppose you created an F.AnySystem object for the incoming CSV file. The mapping into B1 object is easier, if you use the same local object ID as in B1 (e.g. 22 for puchase order).
Please open your created scenario with the Graphical scenario Design (SAP B1iSN Tools -> Development Tools -> Graphical scenarion Design) , select your Bizpackage and the Bizstep.
In the opening window B1iSN DesignTime-Diagramm check, that every element is displayed in "green", especially:
- Sender ObjectType
- FileInbound
If there is any red or yellow color in it, it means that something of your configuration is missing.
If the FileInbound is not set up correctly, the inbound file will not be recognized as your defined F.AnySystem SenderObjectType.
Please focus on FileInbound and maintain:
- ObjMap (Define own, generate own and save own in exact order)
- Format : Here you need to specify with kind of file is sent towards B1iSN, e.g.:
       SysType = F.AnySystem
       Inbound Formats = DSV
       Character encoding = ISO-8859-1
       DSV Object Identifier = e.g FieldName, if name of File is equal to field Object Id as defined in SenderObjectType
       DSV Object identifier Parameter = this entry needs to fit, what you defined in ObjMap
       DSV Field Delimitter = ;
       DSV Field Wrapper = "
As last step you need to map the column names of the CSV file into XML format as described in chapter Inbound Format conversion of B1iSNGuide 04 on page 44 for section DSV.
Please have a look into the B1iSN guide again, you will find every information needed to tranform an CSV file into F.AnySystem object and into B1 object.
Best regards
Bastian

How to define CU60 tables

Hi...
I like to Know how to define tables and fields in Cu60 Transaction Table.. Please Provide me a Solution.
With Regards,
Aahbha

Dear Aabha,
1.First create the table in CU61,_set the status as released_,include the check box for decision table and assign the
characteristics created in CT04 and save the data.
2.IF it's not set with the status released means you cant maintain any values in the table in CU60.
3.The use of including this check box for decision table is when you maintain the table values using CU60,automatically the
system proposes all the combination of characteristic values.
4.Say for Eg: in CU61 you have assigned 2 charac values one is colour and you have 2 values for this say Blue and red and
another charac say gear type and you have 2 values one is 4 gear and another is 5 gear type,now 4 different combination is
possible,so this combination will come in CU60.
Check and revert
Regards
S Mangalraj
Edited by: Mangalraj.S on Oct 6, 2010 11:45 AM

What is meant by article grouping and site grouping and how to define

what is meant by article grouping and site grouping and how to define in SAP.

Hi Charan,
Article Grouping in its broader sense means grouping of Articles for ease of maintenance and business functions, either on the basis of Hierarchy or on the basis of Merchandise Category.Article Grouping is also primarily useful in promotions,wherein you can define a set of articles(which may not necessary fall under the same MC or Hierarchy) and club them together and assign them in a promotion.Txn codes used are : VBG1/2/3 - Create/Change/Display Article Group
For more information refer the link below
http://help.sap.com/saphelp_47x200/helpdata/en/12/08485c470311d1894a0000e8323352/frameset.htm
Site Grouping is used for ease of maintenance by grouping the sites.It is also used to maintain the characteristics as well.This can also be used in Allocation Tables,promotion and Listing etc
Some of the Txn codes -
WB50 - Site Group,Create Alloc,.table
Wb56 - Site Group, Alloc.table,Maintain Sites in Class
WB60 - Site Group,Create Promotions
WB64 - Site Group,Maintain SItes to Class
Wb80 - Create Site Group Other
For more information,refer the link below
http://help.sap.com/saphelp_47x200/helpdata/en/12/08485c470311d1894a0000e8323352/frameset.htm
Hope it helps
Rgds,
Aram K.
For more information refer to the link below

How to define the detail "Condition" item for sales order?

Hi, I checked the condition information of a sales order, the following contents were displayed:
PR00     Price     230.00
     Gross Value     230.00
     Discount Amount     0.00
     Net Value for Item     230.00
     Net Value 2     230.00
     Net Price     230.00
I can understand that the price 230.00 can be maintained via tcode: vk11, what I want to know is:
How to define/control the following items such as:
Gross Value     230.00
Discount Amount     0.00
Net Value for Item     230.00
Net Value 2     230.00
Net Price     230.00
and how to control their currency?
Thanks.

Hi, Dear Ferry Lianto,
Thank you very much.
Commonly I know the total pricing procedures.
But, would you please tell me how to control the CURRENCY for the subitem of a condition type as follows?
For example, I can see the following kind of
contents in the Tab:condition of a sales order:
PR00     Price     130.00000      TEST     100
     Gross Value     20.12      USD     100 <-how to
     Discount Amount     0.00      USD     100
     Rebate Basis     20.12      USD     100
     Net Value for Item     20.12      USD     100
     Net Value 2     20.12      USD     100
     Net Value 3     20.12      USD     100
VPRS     Cost     27.22      HKD
     Profit Margin     16.61      USD
The currency of PR00:price can be controlled via tcode VK12; but how to control the currency of its subitem such as gross value, discount amountm, net value for item, net value 2, & net calue 3...
Thanks and regards.

How to define Alternate Currency ?

Hii SAP gurus..
Could u plss tell me how to define alternate currencies like USD and EURO ....and how to see the balances in that currencies....
Thanks in advance
Regards
Ramki

You can Maintain an additional currency through hard currency and Index based currency in country settings.
Path : spro - img - sap netweaver -- general settings - set countries - define countries in my sap system- select your country and assign the additional currency in index based curency and hard currency. Every document will authomatically posted in 3 currencies, provided you maintainain the exchange rate types for the additional currrencies assigned by you.
You can check the documents in Fb03 and select display in other currency.
Regards

How do u maintain series group?

how do u maintain series group?

Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Regards,
Rajesh Banka

How to define our own selection screen for logical database in abap-hr?

Hi Friends,
Can u please help me
How to define your own selection screens for logical database.
we use to do like(goto->attributes-HRReportcatagerious ).but How to desin using customer table like t599c, t599f and how to add to my logical database?
Thanks in advance
charan

check out this online help
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/dba65c35c111d1829f0000e829fbfe/frameset.htm
Regards
Raja

How do I maintain responsive scaling on an edge animate animation when I insert it into dreamweaver?

How do I maintain responsive scaling on an edge animate animation when I insert it into dreamweaver? Please and thank you!

example.com is a generic http:// address to illustrate the difference between what you gave, file:/// and an actual URL address. There are no tutorials on that site. Sorry for the confusion.
#1 Have you procured your domain name and web hosting yet? You'll need to do that to publish your pages online.
#2 When you sign-up for web hosting, the company will send you FTP log-in credentials to your site's web server. You will enter this info into your DW Site Definition. Site > New Site > See screenshots below:
Under Servers: Root Directory is whatever your hosting company tells you to use. This varies by web host. Some commonly used ones are public_html, www or htdocs.
After your site definition is set-up, hit the TEST button to confirm it's working. If it's not connecting, go to More Options.
Go to the Files Panel (F8). Use the UP Arrow to PUT files to remote server.
Use the DOWN Arrow to GET files from server to your local site folder.
Post back when you have finished uploading your work to the remote server.
Nancy O

How do I maintain my Time Capsule hard drive?

How do I maintain the hard drive in my Time Capsule, say I wanted to maintain it with Disk Utility, Drive Genius, or Disk Warrior?
How should I connect to the TC from a MBP? I understand wireless or ethernet is not the way to do this.

apple says to never run disk utility on a time capsule disk and says when you reboot the time capsule it will check the file system. i tried to run disk utility on a sprase bundle and it trashed it and made it unusable. from other things i've read, it made it sound like if you need to run disk utility, or disk warrior, your supposed to remove the drive from the time capsule and connect it directly to the computer.

How can I maintain more than one contact person for a supplier

Hi
As per our business requirement , How can I maintain more than one contact person for a single supplier in SRM?
How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier.
we are in SRM 7, and currently we are creating contact person throug customised BDC.
please advice.
Thanks & Regards
NITIN
Edited by: nitinkk on Sep 9, 2011 10:22 AM

Dear Yaniv,
Thanks for your information,
I am able to create users But my problem is How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier ? Is there any kind of maping is available for the user/ contact person to the supplier no.??
Thanks & Regard
NITIN

How to define Maintainance fees in REFX?

Similar Messages

Maybe you are looking for