How to delete a Transient Provider?

Hi Balaji Subramanian,
Trying to replicate your scenario:
Assumption: You are building the TP on top of a HANA view.
Tcode: RSDD_HM_PUBLISH
Created a new Analytic Index using the existing HANA Package and Model.
TP with naming convention @3 was created.
Now am trying to delete the TP using Tcode: RSDD_LTIP
Select the Index and press delete button and click Yes
It will get deleted.
BR
Prabhith

Similar Messages

How to Delete the dimension from the cube ?

Hi ,
how to Delete the dimension from the cube ?
i have added the new dimension by assiging one characteristic to that dimension .
now i want to delete it ,
but system saying that Dimension ZXXX contains InfoObjects; deletion not possible .
how to delete it ? any help .
Thanks

Make sure you donot have any data in cube. If you have some data in cube, then you will not be able to see Delete option.
Right click on the cube-->Delete data.
Then double click on the cube>Goto Edit mode> select the IO under that Dimension> right click> now you will be able to see the Delete option (provided you have deleted all the date from Cube)
Then right click on Dimension-->Delete
Regards,
Pavan

How to delete the number saved in CALL FORWARDING list?

how to delete the number saved in CALL FORWARDING list? seems like the number cannot be deleted in CALL FORWARDING list, i tried several times...
he thing is, here are three numbers in the call forwarding list, one of them were set up by mistake, and none of them can be deleted.......it brothers me all the time. i already turn it off, but the number list is still there...

Hello dennis130915 and welcome to the BlackBerry Support Community Forums.
The image you have uploaded is unable to be displayed.
Call Forwarding is a carrier controlled feature. Most likely, the number you see could be for the Voice Mail server.
It's advised you call your mobile service provider to further assist with this feature.
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How to delete the Generated files from application server(open hub)?

hi experts,
when i try to execute process chain the DTP it is giving below dump. Exception CX_RSBK_REQUEST_LOCKED logged.
when i execute the DTP manually and trying to delete the previous request, it is giving for dump ITAB_DUPLICATE_KEY.
so to delete the generated file from application server, how to delete it for specific dates?
Information on where terminated
Termination occurred in the ABAP program "GPD6S3OE0BCVGC6L9DBNVYQARZM" - in
"START_ROUTINE".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 2874
of the (Include) program "GPD6S3OE0BCVGC6L9DBNVYQARZM".
The program "GPD6S3OE0BCVGC6L9DBNVYQARZM" was started as a background job.
and when i check the dump it is point out at below code
" Populate the lookup table for 0STOR_LOC
SELECT * from /BI0/TSTOR_LOC
into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
but the programme is syntactically correct only.
how to rectify the issue.
regards
venuscm
Edited by: venugopal vadlamudi on Sep 28, 2010 1:59 PM

hi experts,
We have written start routine to get the storage location text and sending to File located at Application server through OPEN HUB.
here is the code written in the Transformations
In the global section
Text for 0STOR_LOC
    DATA: l_0stor_loc_text TYPE HASHED TABLE OF /bi0/tstor_loc
          WITH UNIQUE KEY stor_loc.
    DATA: l_0stor_loc_text_wa TYPE /bi0/tstor_loc.
and in the code to get the text
" Populate the lookup table for 0STOR_LOC
    *SELECT * from /BI0/TSTOR_LOC*
      into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
      FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
              STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
im sure there is problem with the Routine only. i think i need to change the code if so please provide me the modified one.
thanks
venuscm
Edited by: venugopal vadlamudi on Sep 29, 2010 9:37 AM

How to delete email attachments from server

Hi,
I created an a CF template for sending e-mail which includes
attachments. It has been tested on my dev box and is functioning
fine as the attachment upload to a designated directory on the
server. I would like the attachments to be purged once the e-mail
has been forwarded to the recipent.
In Macromedia's ColdFuision 7MX web application construction
book page 913 "Interacting with Email" there is a CFC that will
delete the file when the user ends their session.
I am not sure how to write this to fit the code I am using.
Here is the eMail form

<html>
<head>
<title>Please enter your message</title>
</head>
<body>
<form action="Send_Email.cfm" method="post"
enctype="multipart/form-data">
<table width="500" border="0" align="center">
<tr>
<td width = "500" colspan="2">Please enter your e-mail
message:</td>
</tr>
<tr>
<td width="250">To:</td>
<td width="250"><input type="text" name="to_addr"
value=""></td>
</tr>
<tr>
<td>Subject:</td>
<td><input type="text" name="subject"
value=""></td>
</tr>
<tr>
<td>Message:</td>
<td><input textarea name="message" rows="5"
cols="35"></textarea></td>
</tr>
<tr>
<td width="250">Attachment #1:</td>
<td width="250"><input type="file"
name="attachment_1" value=""></td>
</tr>
<tr>
<td width="250">Attachment #2:</td>
<td width="250"><input type="file"
name="attachment_2" value=""></td>
</tr>
<tr>
<td width="250">Attachment #3:</td>
<td width="250"><input type="file"
name="attachment_3" value=""></td>
</tr>
<tr>
<td width="250"> </td>
<td width="250"><input type="submit"
name="Send_Email" value="SendEmail"></td>
</tr>
</table>
</form>
Here is the form to send the attachment.


<cfif FORM.attachment_1 neq "">

<cffile action="upload"
destination="D:\uploadsTEST\"
filefield="attachment_1"
nameconflict="makeunique">

<cfset attachment_local_file_1 =
"d:\uploadsTEST\#file.serverfile#">
</cfif>

<cfif FORM.attachment_2 neq "">

<cffile action="upload"
destination="D:\uploadsTEST\"
filefield="attachment_2"
nameconflict="makeunique">

<cfset attachment_local_file_2 =
"d\uploadsTEST\#file.serverfile#">
</cfif>
<cfif FORM.attachment_3 neq "">

<cffile action="upload"
destination="D:\uploadsTEST\"
filefield="attachment_3"
nameconflict="makeunique">

<cfset attachment_local_file_3 =
"d:\uploadsTEST\#file.serverfile#">
</cfif>

<cfmail FROM="[email protected]" to="#form.to_addr#"
subject="#subject#"
server="an001so-dby1c.pbi.global.pvt" port="25">
#message#
<cfsilent>

<cfif FORM.attachment_1 neq "">
<cfmailparam file="#attachment_local_file_1#">
</cfif>
<cfif FORM.attachment_2 neq "">
<cfmailparam file="#attachment_local_file_2#">
</cfif>
<cfif FORM.attachment_3 neq "">
<cfmailparam file="#attachment_local_file_3#">
</cfif>
</cfsilent>
</cfmail>
Here is the session application code to delete the file upon
uploading

<cfcomponent output="false">

<cfset this.name="attachmentPurge">

<cfset this.sessionManagement=true>
<cfset this.clientMangment=true>
<cffunction name="onSessionEnd" output="false"
returnType="void">

<cfset var attachDir = expandPath("Attach")>
<cfset var getFiles = "">
<cfset var thisFile = "">

<cfdirectory directory="#attachDir#" name="getFiles">

<cfloop query="getFiles">

<cfif getFiles.type neq "Dir">

<cfset thisFile =
expandPath("Attach\#getFiles.Name#")>
</cfif>
</cfloop>
</cffunction>
</cfcomponent>
The tutorial only explains how to delete the attachment when
the recipient checks there mail
in the POP server.
Assuming that the sender is in a session would the code be
written to delete the attached file from the directory on
the server one the e-mail is sent.
Can someone explain how to automatically delete email
attachments from a designated directory or provide me with the code
that would handle this after an email is sent with attachment.
Thanks,
Tony

I don't know why your dos code didn't run. It could be
addressing. My limited experience with cfdirectory/cffile/cfexecute
is to type out the complete path at least once.
Good books?
Hard to say, depends on what else you are new at. If you are
new to html, then htmlgoodies.com has good tutorials. So does
webmonkey.com. If you have trouble with sql, I have heard good
things about the SAMS book, Teach Yourself SQL in 10 Minutes by Ben
Forta. I learned javascript by buying the book Teach Yourself
Javascript in 24 Hours. The O'Reilly books are also good. I learned
awk with one of those books.
Glad you liked the fish pics. The camera is specified on most
of the pages. If it says Reefmaster, I used an external strobe. If
it says Sony I either used the camera flash only or natural light.
By the way, that is not a Cold Fusion site. It's strictly html and
javascript.

How to Delete and Reset a Lost Root Password on a System With a Mirrored ??

hi All,
we are experiencing problem,lost root password on Solaris 10 Sparc T5120, with mirror root,
and we found the solution from Metalink.oracle.com, has anyone have try this??
here list capture the file system :
Filesystem size used avail capacity Mounted on
*/dev/md/dsk/d10 2.0G 349M 1.6G 18% /*
*/dev/md/dsk/d40 9.8G 563M 9.2G 6% /usr*
*/dev/md/dsk/d30 9.8G 1.4G 8.4G 15% /var*
*/dev/md/dsk/d50 7.9G 310M 7.5G 4% /opt*
*/dev/md/dsk/d600 3.8G 4.3M 3.8G 1% /home*
*/dev/md/dsk/d602 471M 20M 404M 5% /app/controlm*
*/dev/md/dsk/d601 471M 251M 173M 60% /app/ctsa*
*/dev/md/dsk/d604 4.9G 1.1G 3.8G 23% /app/oramon*
*/dev/md/dsk/d603 20G 11G 8.2G 58% /app/oracle*
*/dev/md/dsk/d606 39G 10.0G 29G 26% /proj/iprdb01/orafra/iprod01p*
here the step :
Solstice DiskSuite[TM] Software: How to Delete and Reset a Lost Root Password on a System With a Mirrored Root Disk [ID 1010755.1]
Solution
Steps to Follow
How to delete and reset a lost root password on a system with a mirrored root disk.
1) Insert the Solaris[TM] Operating System CD-ROM into the CD-ROM drive.
2) Once the CD-ROM is in the drive, perform a stop-a. This brings the system down to the "ok" prompt.
3) From the "ok" prompt, perform a single-user boot from the Solaris OS CD-ROM.
ok boot cdrom -s4) At the "#" prompt, determine which disk is the system's boot disk (containing the root file system). There are several Oracle architectures and various configurations of systems when it concerns a boot disk. As a general rule, most boot disks are attached to controller 0 (c0). Usually, their SCSI target is
either 3 (t3) or 0 (t0). However, Oracle machines are very flexible, and the boot disk could be at a different location. If you are not sure which disk is your boot disk, perform the following steps to determine the location of the boot device:
a) # eeprom boot-device
The output might appear to be simple, such as "disk" or "disk1" or more complicated, such as a pathname "/iommu/sbus/espdma@4,8400000/...../sd@3,0:a".
b) Make note of the boot-device. If the boot-device is a pathname, it is beyond the scope of this information to provide the location of the customized boot disk. However, for most configurations,
finding the customized boot disk is an easy task. The "Format" command shows all available disks:
#format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
(enter its number): c) Enter d to exit format.
Now, you will have an idea what disks are on the system. Therefore, if the boot-device is "disk" and format shows "c0t0d0" (on some systems "c0t3d0") then that is the boot device. If boot-device
shows "disk1" and format shows "c0t1d0," then that is the boot device. If format shows multiple disks, then based on what the "eeprom boot-device" command shows, the system's boot disk would be:
boot-device format
disk c0t0d0 or c0t3d0 (machine dependent)
disk1 c1t0d0
disk2 c0t2d0
disk3 c0t3d0 or c0t0d0 (machine dependent)
and so on ....
5) Because the system was not brought down gracefully (no root password means having to use the Stop-a keystroke to "crash" the system), you need to run "fsck" to clean the root partition (slice). The fsckalso confirms that you selected the proper slice.
# fsck /dev/rdsk/c1t0d0s0
where the X and Y are determined by the previous procedure. It is also possible to have a root partition which is not on slice 0 (s0), but, again, that is not a standard configuration.
The output of "fsck" looks like this:
** /dev/rdsk/c1t0d0s0
** last mounted on /
** Phase 1 .....
The second line in the output of "fsck" ("** Last mounted on /") confirms that this is the correct root filesystem partition. Answer "y" to any questions fsck asks. There shouldn't be too many items
needing repair. If there are, there is a possibility of a corrupted root filesystem. After fsck is finished, mount the root partition:
# mount /dev/dsk/c1t0d0s0 /a
Again, X and Y are the same as for the fsck command.
For example:
# mount /dev/dsk/c1t0d0s0 /a
6) From the root prompt, set the proper TERM type command (such as vt100, dtterm, sun, and so on)
by entering this command:
# TERM=sun; export TERM
7) Use the VI text editor to edit the /etc/shadow file:
# vi /a/etc/shadow
8) The first line of the /etc/shadow file is the one you want to modify.
It looks like this:
root:c3.yAVmYodWsc:6445::::::
9) Delete every character between the first and second colons in the first line of the file. When you finish deleting the characters, the line should look like this:
root::6445::::::
10) Press the Escape key, then enter the following to save the file and exit vi:
:wq!
11) Use the VI text editor to edit the /etc/system file andremove the "rootdev" line shown below:
# vi /a/etc/system
*rootdev:/pseudo/md@0:0,0,blk
Don't comment out the "rootdev" line. Actually remove it.
12) In the /a/etc/vfstab file, replace the lines for the system filesystem meta-devices with their underlying partitions. For example, change lines from
/dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no -
to
/dev/dsk/c1t0d0s0 /dev/rdsk/c1t0d0s0 / ufs 1 no -
ONLY change the lines for root (/) and the filesystems that were affected by the actions you took in step 1 of this procedure. All other metadevices may stay as is in this file.
13) Unmount root, check the root filesystem, and then stop the system:
# cd /
# umount /a
# fsck /dev/rdsk/c1t0d0s0
# stop-a
14) Boot to single-user mode:
ok boot -swTHIS STEP IS VERY IMPORTANT; YOU MUST BOOT TO SINGLE-USER MODE TO AVOID FILESYSTEM CORRUPTION.
If the system does not boot to single user mode, you might have made a mistake in the previous steps.
15) Because the root password was cleared in an earlier step, press Return when prompted for the the root password. Once you are in single-user mode, you must clear the metamirrors and all the sub-mirrors for the root filesystem. For example, if root (/) is d0, run the following command:
# metaclear -f -r d0
Running the metaclear command not only clears the metamirror but also clears the submirrors that are part of this mirror.
16) When the metamirror is cleared, continue the boot up to multiuser mode by either pressing CTRL-D or by entering the following:
# exit
Now everything should be as it was, except that the system partition is on the underlying partition and isn't mirrored. You will simply need to re-create the metadevices for the root mirror as you had originally.
many thanks

Hi,
Halt your machine.
Boot with fail-safe mode.
format and list out the disks. (You can get the root & mirror disk (c#t#d#) details from /etc/lvm/md.tab of your root or mirror disk. Earlier explorer output may help)
Mount the root disk and remove the password entry in /etc/shadow
umount it.
Mount the mirror disk and remove the password entry in /etc/shadow
umount it.
reboot the server.
Hope this helps!

How to delete the record in the table without using lead selection?

hi,
I have added the separate column "delete" to the table uielement and so for each record or row of the table the appropriate "delete" link to action will be there................the code below works when the particular row is selected through lead selection only.......
help me how to delete without using lead selection.....
DATA:
NODE_MODULE                         TYPE REF TO IF_WD_CONTEXT_NODE,
ELEM_MODULE                         TYPE REF TO IF_WD_CONTEXT_ELEMENT,
STRU_MODULE                         TYPE IF_V_MODULE=>ELEMENT_MODULE .
   data itab TYPE TABLE OF zac_modules.
navigate from <CONTEXT> to <MODULE> via lead selection
NODE_MODULE = WD_CONTEXT->GET_CHILD_NODE( NAME = `MODULE` ).
get element via lead selection
ELEM_MODULE = NODE_MODULE->GET_ELEMENT( ).
get all declared attributes
ELEM_MODULE->GET_STATIC_ATTRIBUTES(
    IMPORTING
      STATIC_ATTRIBUTES = STRU_MODULE ).
NODE_MODULE->GET_STATIC_ATTRIBUTES_TABLE(
    IMPORTING
     TABLE = itab )
DELETE itab WHERE zmodule_id = STRU_MODULE-zmodule_id.
CALL METHOD NODE_MODULE->BIND_TABLE
    EXPORTING
      NEW_ITEMS            = itab
   SET_INITIAL_ELEMENTS = ABAP_TRUE
   INDEX                =
ENDMETHOD.

Hi ,
The onclick event provides you with a standard paramater "CONTEXT_ELEMENT" which has the element from which the event is triggered.
so you can declare this in the handler(if it is not there) and use it as follows.
CONTEXT_ELEMENT TYPE REF TO IF_WD_CONTEXT_ELEMENT an importing paramater.
DATA:
NODE_MODULE TYPE REF TO IF_WD_CONTEXT_NODE,
ELEM_MODULE TYPE REF TO IF_WD_CONTEXT_ELEMENT,
STRU_MODULE TYPE IF_V_MODULE=>ELEMENT_MODULE .
data itab TYPE TABLE OF zac_modules.
CONTEXT_ELEMENT->GET_STATIC_ATTRIBUTES(
IMPORTING
STATIC_ATTRIBUTES = STRU_MODULE ). "Using the context_element paramater to get the static attributes.
NODE_MODULE->GET_STATIC_ATTRIBUTES_TABLE(
IMPORTING
TABLE = itab )   "getting all the data.
DELETE itab WHERE zmodule_id = STRU_MODULE-zmodule_id. "deleting the particular row from the table and binding it.
CALL METHOD NODE_MODULE->BIND_TABLE
EXPORTING
NEW_ITEMS = itab
* SET_INITIAL_ELEMENTS = ABAP_TRUE
* INDEX =
thanks,
Aditya.

How to delete the items in the recycle bin permanently from the windows using Diruse command

How to delete the items in the recycle bin permanently from the windows using Diruse command.
Because most of the time we get out of disk space issues.
Can somebody help me in giving with an example

You can right-click Recycle Bin|Properties and choose radio button for
Don't move files ....
This one may also help.
http://technet.microsoft.com/en-us/library/cc784980(v=ws.10).aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How to delete the multiple companies assignement of a employee in SRM

Hello Friends,
In business partner maintenance (BP), one employee assigned to multiple companies in relationship tab.
Following are the entries observed in relationship tab in BP Transaction code.
Is employee of
xxx(BP number) u2013 Company(address type) --- xxx(description) u2013valid from --- valid to -->1st entry
xxx(BP number) u2013 Company(address type) --- xxx(description) u2013valid from --- valid to --> 2nd entry
Ideally one employee should assigned to one company only.
Kindly let me know how to delete the relationship.
We are using release SRM 5.0 with classic extended scenario.
The organization structure is HR Replicated.
Thanks in Advance,
Pithani Suresh

Hello Ganesh,
Thank you for providing information.
The employee is not assigned to multiple companies. The assignment is related to orgnizational unit.
In organization structure (PPOSA_BBP), the user/position is assigned to one organization unit only
More details about this issue,
we find the relationship of the user/position in BP T.code (Relationship Tab), it is showing the relationship with current organizational unit and previous organizational unit. Ideally it should be assigned to one organizational unit. Due to some inconsistency, it is still showing the previous organizational unit.
Example: Ex: User A is replicated from HR to SRM and assigned to Dept A (org unit 1) and later User A is shifted to Dept B (org unit 2) from HR Replication.
Following are the entries observed in relationship tab in BP Transaction code.
Input is BP number assigned to of the user A central person.
User u201CAu201D is employee of
BP number of org unit 1u2013 Company(address type) --- xxx(description) u2013valid from --- valid to -->1st entry
BP number of org unit 2 u2013 Company(address type) --- xxx(description) u2013valid from --- valid to --> 2nd entry
Thanks & Regards,
Suresh Pithani

How to delete a Customer in its SALES AREA?

Hi All,
I've deleted a Customer by t.code OBR2. But it exists again in its SALES AREA.
Could anyone tell me how to delete it in the sales area too?
Thanks

Hi Gandalf,
not possible.
Note 725857 provides some reference coding for your own program.
Regards,
Joosz

How to delete multiple rows from ADF table

How to delete multiple rows from ADF table

Hi,
best practices when deleting multiple rows is to do this on the business service, not the view layer for performance reasons. When you selected the rows to delete and press submit, then in a managed bean you access thetable instance (put a reference to a managed bean from the table "binding" property") and call getSeletedRowKeys. In JDeveloper 11g, ADF Faces returns the RowKeySet as a Set of List, where each list conatins the server side row key (e.g. oracle.jbo.Key) if you use ADF BC. Then you create a List (ArrayList) with this keys in it and call a method exposed on the business service (through a method activity in ADF) and pass the list as an argument. On the server side you then access the View Object that holds the data and find the row to delte by the keys in the list
Example 134 here: http://blogs.oracle.com/smuenchadf/examples/#134 provides you with the code
Frank

How to delete sales order ?

I want to know that how to delete the sales order ?we are doing planning run for repitative manufacturing but some sales order are taking part in MRP run so how we can restrict ?please provide the solution for the same.

Hello,
First of all, it is not advicable to delete a sales document from SAP, you can put a reason for rejection and reject the order.
Once you reject the order the orders will not have a requirement and will not be considered for MRP run.
Prase

How to delete columns in table control

hi
1) I have creted a table control with five columns
now i want to delted the tow of the five coluent pls let me know how to delete it
1) also i am useing a module pool programming (code if needed i will paste)
in that the requirment is to select data from a ztable and aloow user to enter new ship to data only whne the corresponding records exists in kna1 table
and to populate the name1 value automatically from table kna1 whne user enters ship to number
pls suggest
regards
Arora

Hello,
Requirement 1
i believe you need to delete a row from the control table based on the user input...
if thats the case then definitely in the control table the multiple line selection will be activated .
in PAI of the control table screen...
if user has clicked delete.
loop at control table records..
if the selection code for the line is 'X'.
Delete from the internal table.
endif.
endloop.
endif.
Requirement 2..
i will give an outline on the checks
a)first let the user enter the data...in the PAI of the screen...write the code to do the checking....if your requirement is not satisfied provide a warning/error message or delete the record and give a message stating the reason for deletion...
in PAI.
for a control table...
loop at the table records
select from table and check if user record is O.K
if not delete the record and give message
endif.
endloop.
b)similarly inside the PBO write code to fetch the name1 from Kna1 table for the ship to number if that ship to number is not empty
in PBO of that screen
if ship_to is not initial.
select text for ship_to number to the display field
else.
clear the display field
endif.
reward if the suggestions were useful
Regards
Byju

HT204406 How to delete duplicate songs from Libary without deleting them from play list or other devices

How to delete duplicate songs from libary without deleting them from playlist or other devices

I'm with you verm71; it's not entirely clear how Apple is expecting you to manage this. I'm going on vacation soon and want to clean up my phone so that it's nice and empty for the new pictures. There doesn't seem to be a way to do this without losing your pictures in the new Photos as well. If imported, it's impossible to see which is the Cloud version and which is the Local version. It's very annoying.
I've also noticed in iPhoto you used to have the ability to locate the original of the picture inside the photo database. That option is not provided in Photos, making finding the original extremely difficult.
It seems to be a great, well-oiled system. But I would love to know how Apple envisions the typical workflow for archiving...

How to Delete Phantom Appletalk Printers

It seems that my Appletalk network is now riddled with over a dozen phantom Appletalk printers and I cannot figure out how to get them to go away. We're all Tiger now, and in the good ol' days, renaming Appletalk printers was no biggie .. the new name simply replaced the old.
Not anymore. Each time I rename a printer, the new name simply adds an additional (non functional) printer name.
You cannot print to the old printer name, but since some of the old and new names are similar, this is getting to be REALLY confusing for my 50+ users. This seems to have started last year (I thought I was crazy), but now it's a nightmare.
HELP!! I know how to delete the printers from each individual user's printer setup, but I don't want these phantom printers broadcasting over Appletalk anymore. I've gone into Classic to see if I could use either the Apple Print Utility or HP Laserjet Utility to remove them, but it's not possible. Oh, we have only one DEFAULT Appletalk zone, if that matters.
Any ideas? Thanks for your help.
... sigh
Powerbook G4 Mac OS X (10.4.8)

Hello Lisa,
The fact that you can see other AppleTalk printers would be a function of either the printers themselves or by other Mac's sharing their printers. The first thing I would do is ensure that printer sharing is disabled on all Mac's (providing of course that the printer is networked and not connected via a particular Mac's USB). Then I would check the config of all the printers you have to ensure they have only the same zone set. The other thing to check is that if the printer/s uses some sort of AppleTalk adapter, then this was configured for the one zone.
Paul

How to delete a Transient Provider?

Similar Messages

Maybe you are looking for