How to Delete Category Modeler Schema in Deployed status

Please help. We have a challenge of deleting Schema's which were created to test out during the Dev phase. We have deployed these schema and would like to delete them for various reason.
Any help in this regards will be highly appreciated.

We used these tables
CRMC_ERMS_CAT_AD
CRMC_ERMS_CAT_AS
CRMC_ERMS_CAT_AT
CRMC_ERMS_CAT_CA
CRMC_ERMS_CAT_CD
CRMC_ERMS_CAT_CT
CRMC_ERMS_CAT_HI
CRMC_ERMS_CAT_IC
CRMC_ERMS_CAT_ID
CRMC_ERMS_CAT_LN
CRMC_ERMS_CAT_OK
CRMC_ERMS_CAT_QU
CRMC_ERMS_CAT_SP
Refer to this note for knowing methodology for transporting
SAP Note (864439)  ( please use this note only for methodolyy but refer to the tables I listed above for transport as it will take care of all link to subject profile and related hierarchhy tables.)
Let me know if this works else will try to eloborate

Similar Messages

  • How to delete the messages from sxmb_moni with status cancelled

    Hi ,
    how to delete the messages from sxmb_moni with status cancelled
    Is there any report for this
    Regards
    Suman

    I think just for deleting the jobs you can do this only
    Scheduling Delete Jobs
    To schedule delete jobs, proceed as follows:
           1.      In the Integration Engine -
    > Administration menu, choose Schedule Delete Jobs.
           2.      Select the job(s) to be scheduled.
           3.      Specify the start time and date.
           4.      Specify the period you want to use and choose Schedule.
    For an overview of all jobs, choose Jobs.

  • How to delete a IDOC which has the status 51.

    Hi,
    I am trying to delete the IDOC(status 51) from WE02. But not able to delete out, because set delete indicator is disable mode.
    Please let me know is there any way to delete the failure IDOC which is status 51.
    And also let me know how to findout the user or usergroup  who receives the mail through WORKFLOW when an IDOC was failed.
    Thanks,
    Vinay.

    hi vinay,
    Tx. WE11
    Prg. -- RSETESTD
    In the abovesaid program the following fm is used for deletion of idoc. But before the deletion of idoc`s there are several other procedures to be followed. For further reference, explore the abovesaid program.
    CALL FUNCTION 'EDI_DOCUMENT_DELETE'
            EXPORTING
              document_number        = gd_edidc-docnum
            EXCEPTIONS
              idoc_does_not_exist    = 1
              document_foreign_lock  = 2
              idoc_cannot_be_deleted = 3
              not_all_tables_deleted = 4
              OTHERS                 = 5.
          IF NOT syst-subrc IS INITIAL.
            MESSAGE ID syst-msgid TYPE syst-msgty NUMBER syst-msgno
                WITH syst-msgv1 syst-msgv2 syst-msgv3 syst-msgv4.
          ENDIF.
    This is the code found in the abovesaid program.
    Still if you`re not satisfied with my answer, revert back to me with my server details.
    Else reward points.
    Regards
    GUDURI

  • How to delete the entries in a approval status report

    Hi,
    I have designed approval procedure for marketing document.The approval procedure works fine.But there are certain documents which has gone through approval procedure and is been approved.
    I understand after approval we cannot alter the document hence i created new one with the changes then i have posted it.Now the exisitng document which are no longer required i want to delete or cancel it.
    I am going in user log in and trying Data>Cancel but the document is not getting cancelled.Is there any solution for this???
    thanks
    regards
    Md.nazeer Shaikh

    Hi,
          https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=88735894
          How do I delete a draft invoice?
    Thanks
    Mansoor

  • How to delete production orders that have release status set in APO ?

    I have a few production orders which have a release status set in SCM 5.0 system. I need to delete them now. I cannot delete them from ECC since the ECC system no longer exists.
    I need to delete these orders in APO only ? Is there any way to do this ?
    Thanks in advance for your help!!
    Ranjini.

    Please try deleting with either of the reports  /SAPAPO/OM_DELETE_INCON_ORDERS or/SAPAPO/DELETE_PP_ORDER

  • Applications in category modeler

    Dear experts,
    So far, I haven't seen any restrictions when using the same category modeler schema for 2 different applications (such as case management and service order).
    It just means that we use the same categories.
    Do you know if it is allowed? Are you aware of any issues if we use the same schema for different applications?
    Thanks in advance
    Stephanie

    HI Stephanie,
    Once you design a Schema there is a categorisation Logic behind that and if you want the same Logic to be applicable in other documents also for eg : Service Ticket,Interaction record,compliant...etc you can assign them in the Categorization contexts.
    The Schema is used to categorize a CAll so that we have a better idea about the further flow of the call .SAP has given the flexibility of either using the same schema for all docs OR customized schemas as desired for every doc.
    IMG>CRM>ICWEB>Business Transactions>Define Catgeorization Profile
    Hope this answer's yur call
    Please reward if it helps
    Cheers!

  • How to delete Activty?

    hi, expert:
       how to delete the activity?
    the activity status: REL PCNF
    thanx!

    you can cancel the confirmation using CN29 and then delete the activity. Also chk if any mtrl committment exisists
    Thanks
    Sarang

  • How to delete the deployed composite in weblogic server 11g

    Can someone tell me how to delete the deployed composite in weblogic server 11g ?I'm facing an issue where the weblogic server is getting started and immediately after sometime the server changes to "Force shutdown"..When i checked the logs,there is an error in one of the composite i deployed..So now i wanted to delete the deployed composite?Please help ....
    Thanks

    Hi
    1. Deleting a domain will not hold any references. But make sure that under your user_projects/applications also remove the folder that matches with your domain. Basically under user_projects folder you will see 2 folders named applications and domains. When you create a domain say mySoaDomain, it will crate a folder with the same name under applications folder also with few files like em.ear. If you do this, then you can crate a new soa domain and use the same old name.
    2. NOW comes the most important thing. If you create a new SOADomain, at one point, you had to give details for soainfra and mds schemas. If you give your current existing db details (that was used for your old deleted domain), then you may still have the issues. Because the soainfra db may still have the instances for your old process.
    3. If you really want to have a full clean soa domain, here is what you do:
    a) Run rcu and drop the existing schemas for soainfra and mds.
    b) Run rcu again and create above schemas again.
    c) Now create SOADomain using config wizard and refer above clean rcu db and you are all set.
    3. Under your domain root folder, just searh for files named with your workflow and you should see the .jar location.
    Thanks
    Ravi Jegga

  • How to delete/deploy resources in ES4 workbench?

    In the previous version of the workbench, I could deploy resources (PDF, flash files) into the workbench by drag-and-droping the file from the Windows Explorer into the workbench resource's tab. I could also delete the resource files by right clicking on the item and selecting 'delete' in the resource tab of the workbench.
    In the ES4 workbench, I could no longer do the above. Drag-and-drop does nothing and the right click context menu only shows Relationships, Access Control, History. How to delete/deploy resources in ES4 workbench?

    Hi,
    Did you find how to deploy the xdp files to resources in ES4 workbench? I am looking for deploy the xdp files to ES4 server please help me if you find the solution. Thank you.

  • How to restrict the user(Schema) from deleting the data from a table

    Hi All,
    I have scenario here.
    I want to know how to restrict a user(Schema) from deleting the values from a table created in the same schema.
    Below is the example.
    I have created a table employee in abc schema which has two values.
    EMPLOYEE
    ABC
    XYZ
    In the above scenario the abc user can only fire select query on the EMPLOYEE table.
    SELECT * FROM EMPLOYEE;
    He should not be able to use any other DML commands on that table.
    If he uses then Insufficient privileges error should be thrown.
    Can anyone please help me out on this.

    Hi,
    kumar0828 wrote:
    Hi Frank,
    Thanks for the reply.
    Can you please elaborate on how to add policies for a table for just firing a select DML statement on table.See the SQL Packages and Types manual first. It has examples. You can also search the web for examples. This is sometimes called "Virtual Private Database" or VPD.
    If you have problems, post a specific question here. Include CREATE TABLE and INSERT statements to create a table as it exists before the policies go into effect, the PL/SQL code to create the policies, and additonal DML statements that will be affected by the policies. Show what the table should contain after each of those DML statements.
    Always say which version of Oracle you're using. Confirm that you have Enterprise Edition.
    See the forum FAQ {message:id=9360002}
    The basic idea behind row-level security is that it generates a string that is automatically added to SELECT and/or DML statement WHERE clauses. For example, if user ABC is only allowed to query a table on Sunday, then you might write a function that returns the string
    USER  != 'ABC'
    OR      TO_CHAR (SYSDATE, 'DY', 'NLS_DATE_LANGUAGE=ENGLISH') = 'SUN'So whenever any user says
    SELECT  *
    FROM    table_x
    ;what actually runs is:
    SELECT  *
    FROM    table_x
    WHERE   USER  != 'ABC'
    OR      TO_CHAR (SYSDATE, 'DY', 'NLS_DATE_LANGUAGE=ENGLISH') = 'SUN'
    ;If you want to prevent any user from deleting rows, then the policy function can return just this string
    0 = 1Then, if somone says
    DELETE  employee
    ;what actually gets run is
    DELETE  employee
    WHERE   0 = 1
    ;No error will be raised, but no rows will be deleted.
    Once again, it would be simpler, more efficient, more robust and easier to maintain if you just created the table in a different schema, and not give DELETE privileges.
    Edited by: Frank Kulash on Nov 2, 2012 10:26 AM
    I just saw the previous response, which makes some additional good points (e.g., a user can always TRUNCATE his own tables). ALso, if user ABC applies a security policy to the table, then user ABC can also remove the policy, so if you really want to prevent user ABC from deleting rows, no matter how hard the user tries, then you need to create the policies in a different schema. If you're creating things in a different schema, then you might as well create the table in a different schema.

  • I delete the HR schema , how i can create it again ?

    Hi
    thank you for reading my post
    i delete the HR schema , how i can make that schema again ?
    I dont want to recreate the Database,
    does any one have HR schema creation script ?
    Thanks

    Hi user505214,
    Please see: http://www.schematodoc.com/OracleHR_Sample1.htm
    The scripts are under --> ?/demo/schema/human_resources.
    --- procedure to create schema HR
    REM =======================================================
    REM cleanup section
    REM =======================================================
    DROP USER hr CASCADE;
    REM =======================================================
    REM create user
    REM three separate commands, so the create user command
    REM will succeed regardless of the existence of the
    REM DEMO and TEMP tablespaces
    REM =======================================================
    CREATE USER hr IDENTIFIED BY changeit
    ALTER USER hr DEFAULT TABLESPACE EXAMPLE QUOTA UNLIMITED ON EXAMPLE
    ALTER USER hr TEMPORARY TABLESPACE TEMP
    GRANT CONNECT TO hr
    GRANT RESOURCE TO hr
    REM =======================================================
    REM grants from sys schema
    REM =======================================================
    CONNECT sys/password AS SYSDBA;
    GRANT execute ON sys.dbms_stats TO hr;
    REM =======================================================
    REM create hr schema objects
    REM =======================================================
    CONNECT hr/password
    ALTER SESSION SET NLS_LANGUAGE=American;
    ALTER SESSION SET NLS_TERRITORY=America;
    -- create tables, sequences and constraint
    @?/demo/schema/human_resources/hr_cre
    -- populate tables
    @?/demo/schema/human_resources/hr_popul
    -- create indexes
    @?/demo/schema/human_resources/hr_idx
    -- create procedural objects
    @?/demo/schema/human_resources/hr_code
    -- add comments to tables and columns
    @?/demo/schema/human_resources/hr_comnt
    -- gather schema statistics
    @?/demo/schema/human_resources/hr_analz
    Sorry for the long answer, but I think it can help you.
    Cheers,
    Marcello M.

  • How to force delete odi model

    we need to delet a model , but get error on Txt cross ref. When checking the SNP_Ref, it seems the cross ref is from the column itself . I have two questions:
    1. what my cause this, if someone import the model with duplicate option, will it cause cross ref?
    2. is there anyway to tell if the model was imported with insert/update or duplicate
    3. now that we don't need this model, how do I force delete it? it keesp on poping out txt crossref error.
    Many thanks.

    Hi,
    I guess, to delete the particular model you need to delete the corresponding interfaces where the data stores are used.
    Hope this helps
    Regards,
    Preet.

  • How to upload Master Catalog Schema in Catalog Content Management SRM

    Hi All,
    Please provide the solution as we are in real trouble.
    We have to delete master catalog and upload it again. Deletion is done because the mapping and all are being corrupted. SAP has suggested to delete the catalog and again upload it and do all the mapping again related to supplier and procurement catalog.
    Can all of you guide us what to do:
    1. How to delete a existing Master catalog (can de-publish will do it?)?
    2. We have the master catalog schema with us. Please tell how to upload this schema. Which link we have to follow?
    3. After uploading the master schema how we can check that master catalog is working fine.
    The answers will be rewarded with valuable points
    Regards
    Praveen K Ghosh

    Sridhar,
    I am contacting you regarding the same problem with the CCM MASTER CATALOG, as Praveen said, SAP has suggested to delete the catalog and again upload it and do all the mapping again related to supplier and procurement catalog.
    I have read the documents that you refer to at http://help.sap.com/saphelp_srm50/helpdata/en/7f/9b62405c910272e10000000a155106/frameset.htm.
    In this link I found information really useful, however according to the document the CCM MASTER CATALOG should be created automatically by the SAP Catalog Authoring Tool, this happends the first time that you are using the system.
    Catalog Creation
    You use this function to create catalogs in SAP Catalog Authoring Tool.
    You can create the following types of catalogs:
    Supplier catalogs
    Procurement catalogs
    Model service catalogs
    Note
    SAP Catalog Authoring Tool creates the master catalog, the SRM product catalog, SRM contract catalogs, and the contract catalog for service specifications automatically.
    When SAP Catalog Authoring Tool is used for the first time, you must open the Edit Catalogs application once, before you create any catalogs. Choosing Edit Catalogs triggers the creation of the master catalog. If you do not do this, SAP Catalog Authoring Tool outputs an error message when you try to create a catalog.
    We have already the Master Schema and we know how to map the CCM MASTER CATALOG to the supplier and procurement catalogs. The main problem is that we need to delete the CCM/MASTERCATALOG and created again.
    1. How delete the CCM/MASTERCATALOG?
    In a Test enviroment I have delete the CCM/MASTERCATALOG using the "Edit Catalogs" mode then choosing the catalog and confirm the deletion.
    Once this has been done, all the catalogs has been erased including the CCM/MASTERCATALOG, so now we have the system in blank. I am not sure if this is the correct way to delete the catalog or there is an easiest way where the Procurement and supplier catalogs dont dissapear once the CCM/MASTERCATALOG is deleted.
    2. Once the CCM/MASTERCATAOG is deleted how to created again?
    According to the instructions the SAP Catalog Authoring Tool should created this automatically when is used for the first time, however how we can created the CCM/MASTERCATALOG again if the SAP Catalog Authoring Tool is not used for the fist time.
    Is there a way where the system can create the CCM/MASTERCATALOG for a second time?
    I follow the steps to create the CCM/MASTERCATALOG for the first time however i didnt get a positive result.
    Any help provided will be really appreciated.
    Thanks in advance
    Carlos

  • How to delete process flow jobs

    hi all,
    need a piece of advice here. any idea how i can delete a process flow job scheduled using OEM without?? is there another way to do it without having Oracle Workflow Monitor? plz advice..
    regards,
    ykl

    Hi,
    If you meant to delete all the Process Flows deployed into Work Flow schema without using OEM, then take a look at the scripts available in WF Schema under the directory - <your oracle home>/wf/admin/sql.
    The scripts you will be interested in are wfrmitt.sql which prompts you for the Process Flow Package Type and removes all the relevant information from the Work Flow schema. There are other scripts as well. Please look into those.
    Thanks
    Mahesh

  • How to delete the loadings list in the itunes store (1000 tunes are downloading with no reason)

    Hi
    I switched from an iPhone 4 to an iPhone 5c and now the itunes store app wants to download 1000 tunes (I guess it cannot try more) and it blocks.
    I don't know how to delete the list (not one by one of course .
    If someone has any clue to help
    Thanks

    Hi Francis,
    Check the BADI "TRIP_WEB_CHECK" method "USER_CHECK_GENERAL_DATA".
    Here based on the schema you can modify the "estimated cost" field.
    Hope it helps.
    Regards,
    Jyothi

Maybe you are looking for