How to delete data in SAP Tables

Can i delete data in SAP tables in IDES version? I need step wise answer.
Best answer get good points.
Regards
Kalyan Pothini

Hope this helps:
http://searchsap.techtarget.com/tip/1,289483,sid21_gci1159707,00.html
Fast deletion of SAP table content
Stan Shuralyov
01.17.2006
Rating: -3.86- (out of 5)
If a table has millions of records, full deletion becomes time consuming. Try this tip when you need to delete data quickly -- it works in seconds.
Editor's note: This tip works on an SAP 4.6C, WAS620 and WAS640 system (i.e., all currently suppported SAP platforms). Note that it is a tricky function that should only be used by programmers who know what they are doing.
Code
Use function from SE14
        call function 'DD_DATABASE_UTILITY'
             exporting
                  fct                     = 'MDF'
                  obj_name                = 'TABLE_NAME'
                  obj_type                = 'TABL'
                  exec_modus              = 'S'
             importing
                  subrc                   = sl_subrc
             exceptions
                  unexpected_error        = 1
                  unsupported_function    = 2
                  unsupported_obj_type    = 3
                  table_is_locked_by_tcnv = 4
                  authority_check_failed  = 5
                  abort_function          = 6
                  conversion_error        = 7
                  others                  = 8.
        if sl_subrc = 0 and sy-subrc = 0.
          write:/ '&1', '- Table Deleted OK'.
          commit work and wait.
        else.
          sl_status = 1.                          "Deletion Failed
          write:/ '&1', '- Table Deletion FAILED'.
        endif.

Similar Messages

  • How to select data of sap tables through oracle backend

    I need to fetch the data from oracle Backend for SAP tables. I am new to this and don't know how to work in this manner, so can you please tell me step-by-step procedure for the same.
    Can you please help me, and can suggest for teh solution.
    Rgds, Krishan Raheja.

    > However, at my customer site they have some legacy systems which fetch data from SAP tables of the central ECC prod system using dblinks. Of course we have restricted the access to that user giving only select access. But still I think this is a major security concern. But is there any other way of doing it?
    Well, the legacy systems you mentioned should use a proper data interface instead of direct data structure (e.g. table) access instead.
    Something like RFC-calls for example.
    Or a XI-connector.
    Or a Web-Service.
    Or ... or ... or ...
    There are in fact many options.
    Just acessing the tables is by far the worst option to go.
    At the very least, I'd use views to ensure that only the required data is visible via this dblink and that the access structure (that is, how the views look like) remain the same, even if the SAP application changes in the background.
    Even better would be to provide PL/SQL access procedures.
    That way the legacy application could use a procedure call and wouldn't have to deal with the SAP table design.
    regards,
    Lars

  • How to access data from SAP Tables from a Webi report

    hi all,
    I have a webi report for financial data and from a Bex query which is build on a Cube (this has data from 2 SAP ECC systems)
    i want to build a functionality where in i can call some SAP Table data from this webi report. i should be able to pass information or some hard code where it can understand the source system it has to pick data from.
    in SAP BI, we have this ption wherein we can achieve this through RRI..
    is this possible in Webi ?
    Thanks
    SKS

    Hi.
    Create a universe on top of SAP Tables and create a webi report.
    Using hyper link /open doc we can call  this report from the webi report created on top of your Cube .
    @Sri

  • How to delete data from the table PA0007

    Hi Friends,
    Thank you for your kindly help.
    When I upload data to infotype 0007(planed working time),
    there is something wrong with the infotype 2011. So I want
    to delete the data of  infotype 0007. While using the program RPUREOPN to delete the data, the system will say:0007 cannot be deleted because of time constraint 1/A.
    Now how can I delete the data from table PA0007?
    Pls help me urgently.
    Best wishes
    Anne

    Hi Sikindar,
       Thank you for your help.
      There is another question. There are five clients (Client 300,310,320,330,350) in my HR DEV system. I just want to delete the data of infotype 0007 in client 350. When I change the the time constraint and delete the data in client 350, the data of infotype 0007 in other clients will be safe or not?
    Thank you again for your help!
    Best wishes
    Anne

  • HOW to retrive data from SAP Tabel

    Hi Friends,
       1)Can you please explain how to retrive data from SAP table(example AFRU).
       2) we had requriment based on the qunatity , Product name and date we need to display KPI's .KPI is based no products manfactured per day with some conditions
    Regards
    Srikanth

    Hi Udayan,
        I want to retrive SAP Table data from xMII.can you please explain elabarately how to call "RFC_READ_TABLE" from xMII.
    please do the needful
    Thanks
    Srikanth

  • ABAP program to output data from SAP table to an XML format file?

    hello ABAP experts,
    Does anyone know how to output data from SAP table to an XML format file?  Would be appreciated if someone show the detailed sample codes and we will give you reward points!
    Thanks!

    Edited by: Jose Hugo De la cruz on Aug 19, 2009 8:23 PM

  • How to delete data from single field in a database table?

    Hi guys,
         Plz suggest me How to delete data from single field in a database table?
    thnks,
    pavan

    hi
    in addition to abv details..chk this:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb3aef358411d1829f0000e829fbfe/content.htm
    http://dev.mysql.com/doc/maxdb/en/34/ee7fbd293911d3a97d00a0c9449261/content.htm
    regards,
    madhu

  • How to Pull data from sap r/3 tables to oracle tables

    how to fetch data from sap r/3 tables & data pulled to oracle table .
    GIVE THE APPROPRITE ANSWER FOR THIS.
    THANKS IN ADVANCE.
    If it is useful for me , i am giving point.
    regards ,
    Navita
    Edited by: NAVITA YADAV on Mar 7, 2008 2:07 PM
    Edited by: NAVITA YADAV on Mar 7, 2008 2:08 PM

    You need to perform some native SQL to fetch data. Before doing this connection must be exists b/w your R/3 and Oracle server.
    Basis team will help you to have connection.
    Check the connection name in the table DBCON.
    Check the below code to handle native SQL.
      SELECT SINGLE  DBMS
               FROM  DBCON
               INTO  DBTYPE
               WHERE CON_NAME = DBS.
      IF DBTYPE = 'ORA'.
        TRY.
          EXEC SQL.
            CONNECT TO :dbs
          ENDEXEC.
    ERROR Handling for Native SQL *************
          IF SY-SUBRC <> 0.
            MESSAGE `Docusphere connection failed.` TYPE 'I'.
            EXIT.
          ENDIF.
      EXEC SQL PERFORMING loop_output.
        OPEN C1 FOR
        SELECT  UK1, UK7, uk6, uk9, uk22, uk23, uk25    "field names of Oracle table
        FROM IIS_DOCS_AP10D
        WHERE ( UK2 = 'ZFIINVOICE' OR UK2 = 'ZFIPAYREQ' )    AND
        UK19 = 'E'                                           AND
        UK20 IS NULL
      ENDEXEC.
          DO.
            CLEAR W_OUTPUT.
            EXEC SQL.
              FETCH NEXT C1 into :wa1-arc_doc_id, :wa1-bukrs, :wa1-belnr, :wa1-gjahr, :wa1-wi_id, :wa1-ARCH_METHOD, :wa1-barcd.
            ENDEXEC.
    enddo.
    Reward points if helpful.................

  • How to retrive the deleted data in Z table

    Hi Gyes,
    How to retrive the deleted data in Z table.
    Thanks & Regards,
    Suresh

    Hello Suresh
    If you have not activated the technical setting "Log data changes" in the definition of your z-table (which is unlikely) then there will be no change documents available.
    If you have downloaded your z-table entries sometimes you could use these data for recovery.
    Otherwise your last change is to ask your <b>basis team</b> when the last backup has been made.
    Regards
      Uwe

  • How to convert the flat file data into sap tables . ?

    how to upload flat file data into sap table . before upload mapping is also there in some filds . any one can give me some steps how to upload and mapping . ?

    Hi
    See the sample code
    REPORT zmmupload.
    Internal Table for Upload Data
    DATA: i_mara like MARA occurs 0 with header line
    PARAMETERS: p_file LIKE ibipparms-path.  " Filename
    At selection-screen on Value Request for file Name
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
    Get the F4 Values for the File
      CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          program_name  = syst-cprog
          dynpro_number = syst-dynnr
        IMPORTING
          file_name     = p_file.
    Upload the File into internal Table
      CALL FUNCTION 'UPLOAD'
        EXPORTING
          filename                = p_file
          filetype                = 'DAT'
        TABLES
          data_tab                = i_mara
        EXCEPTIONS
          conversion_error        = 1
          invalid_table_width     = 2
          invalid_type            = 3
          no_batch                = 4
          unknown_error           = 5
          gui_refuse_filetransfer = 6
          OTHERS                  = 7.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Upload the Data from Internal Table
      MODIFY MARA from TABLE i_MARA.
    Regards
    Anji.

  • How to send data from internal table to the shared folder in ABAP

    Hi experts,
             My requirement is to transfer data from a file to shared folder. i just did reading data from a file to a internal table. Now i want to send this internal table data into a shared folder which is  "
    xxx\y\z....".
    I do not have any idea on how to send data from internal table to the shared folder path.
    can anybody please help me out how to do this?
    Thanks & Regards
    Sireesha.

    Where that folder is located, its on presentation server i.e. desktop or application server.
    If its on presentation server, use FM GUI_UPLOAD.
    If its on application server, then use DATASET functions. Have a look at below link.
    [File Handling in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm]
    I hope it helps.
    Thanks,
    Vibha
    Please mark all the useful answers

  • Issues in exporting data from SAP tables in SE16 to excel

    1.How can I save an sap table (displayed through SE16) in ECC6 into a pivot table in excel. [ I have seen this option in R/3 4.7, but do not see it in ECC.]
    2.How can I copy all the rows of a 3000 row SAP table in SE16 and paste the values into excel. I need to do this in one shot and not page by page.
    3.What option do I need to select inorder to preserve the formating of the values while saving as a local file in a spreadsheet format. All the values with leading zeros,like company codes gets saved with only their numeric portion when I save a SAP table as a local file. for eg company code 0001 gets saved in excel as just 1,company code 0056 gets saved as 56 etc. How do I prevent this? What option do I need to set in SAP in order for the values to be downloaded as is, without any truncation of leading zeros.

    1.  I don't know.  How about creating a pivot after exporting data
    2. System->List->Save->local file->clipboard
    Then paste whole lot in Excel
    3. This is a problem with Excel, not SAP.  SAP exports with leading zeroes.
    You could export as flat file & import into Excel into a spreadsheet with an appropriate numbering format.

  • How to select data from a table using a date field in the where condition?

    How to select data from a table using a date field in the where condition?
    For eg:
    data itab like equk occurs 0 with header line.
    select * from equk into table itab where werks = 'C001'
                                                      and bdatu = '31129999'.
    thanks.

    Hi Ramesh,
    Specify the date format as YYYYMMDD in where condition.
    Dates are internally stored in SAP as YYYYMMDD only.
    Change your date format in WHERE condition as follows.
    data itab like equk occurs 0 with header line.
    select * from equk into table itab where werks = 'C001'
    and bdatu = <b>'99991231'.</b>
    I doubt check your data base table EQUK on this date for the existince of data.
    Otherwise, just change the conidition on BDATU like below to see all entries prior to this date.
    data itab like equk occurs 0 with header line.
    select * from equk into table itab where werks = 'C001'
    and <b> bdatu <= '99991231'.</b>
    Thanks,
    Vinay
    Thanks,
    Vinay

  • Insert the data in sap tables from C SHARP application

    Hi All,
                 I want to save some data in sap table from my CSharp(DOTNET)  windows application.I tried with the help of  SAP.Net Connector but that connector is not been supported visual studio 2005 or i not have visual studio 2003 .Soo plz any one can help how i can do this .
    If any one have a idea then plz give me some example also how we did.
    thanks
    regards
    sandeep Dabral

    You have to use SAP .NET connetor to make interface with SAP. This is better way of doing interface between .NET and SAP.
    You create web service (wsdl) in .NET 2003 and try to use that in .NET 2005.
    You're getting the two technologies confused ......
    .Net Connector is used for RFC-type interfaces. It calls Bapi's directly. Web services are not involved for this type of interface.
    WSDL files are used to generate proxies for the .Net client to call Web Services (typically web-enabled Bapi's). This type of interface uses SOAP protocol not RFC and does not use the .Net Connector. Enterprise Web Services may be discovered using the .Net Enterprise Service Explorer, which is a different component from the .Net Connector.
    Regards,
    D.

  • To upload a data into SAP Table with the help of RFC function in BODS

    Hi,
    Please provide me step-by-step solution to upload data into any SAP table with the help of RFC function in Data Services.
    I have created RFC function that upload data into SAP table. RFC Function contains one table that has same structure as my database table.
    In the data services how can i filled the table of RFC function, i am using this function in query transform of data services but it gives me error.
    I am also follow link http://wiki.sdn.sap.com/wiki/display/BOBJ/BusinessObjectsDataServicesTipsand+Tricks
    but it did not help me.
    Thanks,
    Abhishek

    Hi Abhishek,
    Did you import the function module in the SAP datastore first? When you open the SAP datastore, the function should be listed in the 'functions' section. If not, import it. Make sure your function is remote executable.
    Once the function is there, you can use it in a transformation. In 'Schema Out' right-click on 'Query' (top level) and choose 'New Function Call'. You can then select a datastore and a function in the datastore. The wizard will show you which output parameters are available. I believe you have to add at least one and can select as many as you like.
    After confirming your selection the function and the output parameters appear in Schema Out. You can then right-click on the function and choose 'Modify function call'. A popup will appear where you can specify the input parameters.
    I hope this helps.
    Jan.

Maybe you are looking for