Not allowed to move load order of Control panels in System Preferences Tige

I post here because System refuses to let me post in Tiger forum depite my being a forum member since purchasing my G4-500 new just a few months after coming out.
The problem is associated with my PowerBook17" bought new March a year ago. I currently am running 10.4.6 Tiger.
On my G4-500 using Panther 3.9 I am allowed to drag and drop the load order of extension and control panel in System > Accounts > Startup items, at will.
If I try the same thing on my PowerBook 17" It want let me Drag or if I do get it appear to drag what it does instead is remove from the list.
Suggestions?

How do I mark one portion of my question as being answered ( the part so named in the subject line.) and one part as not part about not being able to get into sub category so far as adding a question.
You can use the Helpful buttons without using Solved. Solved will result in your thread being marked as answered, Helpful won't. It is possible to mark a question answered without marking any posts as helpful or solved. You would do this if you found the solution somewhere other that the thread with the question. It is good form to post what the solution is so that others can benefit. You can go back & "unmark" a question as answered, but I'm not sure if there is a time limit from the time you originally marked it answered.

Similar Messages

My DVD drive on my IMAC will not allow me to load a disc, even though there is no DVD in the disc slot.

My IMAC will not allow me to load a DVD, even though the disc drive is empty. Any ideas as to what I should do to resolve the problem
Thanks
Roger

Sounds like you have a newer iMac than this forum covers. The newer ones have a bar or "fence" that, on detecting the drive has failed. moves the bar to block the slot so no media can be inserted (to avoid damage or loss of a disk).
You will need a new optical drive--contact an Apple retail Store or an Authorized Apple Service Provider:
Find an Authorized Service Provider

My system needs internet explorer for a application I need to down load, however I need to down load the latest yahoo tool bar for internet explorer to work properly and firefox will not allow the down load of yahoo toolbar. How do I fix this?

I have not used Internet explorer since downloading firefox and I need IE for a trading platform that I need to use. In order to get IE working I apparently need to down load the latest version of Yahoo toolbar, however when I try to down load the tool bar Firefox will not allow the down load of that file.

Thank you so much, for once in my computer life I knew what the problem was, what caused it, why it was caused, what it did, what it made it do and most importantly how to fix it and to do it correctly and expeditiously. I can not Thank You all enough for all of the help! I also have Pogo mailed this to all on my friends list, where they have all learned as I have and have fixed theirs also. and the message is being spread. Thank You again, I just can not say it enough.

Failed to load resource: the server responded with a status of 405 (Method Not Allowed) XMLHttpRequest cannot load (WCF service URL). Invalid HTTP status code 405

Hi,
while consuming the WCF service POST method Jquery, getting error in Chrome and firefox, in IE Its working fine.
ERROR:Failed to load resource: the server responded with a status of 405 (Method Not Allowed) XMLHttpRequest cannot load (WCF service URL). Invalid HTTP status code 405.
Jquery used to call:
$.support.cors = true
$.ajax({
type: "POST",
url: serviceURL,
data: JSON.stringify(managedProps),
useDefaultXhrHeader:false,
contentType: "application/json; charset=utf-8",
dataType: "json",
//processData: true,
crossDomain: true,
success: function (data, status, jqXHR) {
alert("sucess");
error: function (xhr) {
alert("error");
WCF sevice Web.config
<webHttpBinding>

<binding name="crossDomain" crossDomainScriptAccessEnabled="true" transferMode="StreamedResponse" />
</webHttpBinding>
</bindings>
<services>
<service name="DynamicRefinerWCF.DynamicRefiner">
<endpoint address="" behaviorConfiguration="REST" bindingConfiguration="crossDomain" binding="webHttpBinding" contract="DynamicRefinerWCF.IDynamicRefiner" />
<endpoint address="mex" binding="mexHttpBinding" contract="DynamicRefinerWCF.IDynamicRefiner" />
<host>
<baseAddresses>
<add baseAddress="http://localhost/example.svc" />
</baseAddresses>
</host>
</service>
</services>


</system.serviceModel>
<system.webServer>

<modules>
<remove name="WebDAVModule" />
</modules>
<handlers>
<remove name="WebDAV" />
</handlers>
<directoryBrowse enabled="true" />
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Origin" value="*"/>
<add name="Access-Control-Allow-Headers" value="Content-Type"/>
<add name="Access-Control-Allow-Methods" value="GET, POST, PUT, DELETE, OPTIONS"/>
<add name="Access-Control-Request-Headers:" value="*" />
<add name="Access-Control-Request-Method:" value="*" />
</customHeaders>
</httpProtocol>


</system.webServer>
</configuration>
Thanks,
Swathi

Right on - I have done that a number of times.

My new hard drive does not allow me to load programs on my IMac. It doesn't recognize my administrator password. How can I correct it?

my new hard drive does not allow me to load programs on my IMac. It doesn't recognize my administrator password. How can I correct it?

Wrong forums. Try http://answers.microsoft.com/en-us/mac

My iMac came with mountain Lion preinstalled. I wish to make a Bootable USB Disk. I find that I am not allowed to d/load Mountain Lion from the App Store. I wish to make a purchase. Why can't I?

My iMac came with Mountain Lion preinstalled. I wish to make a Bootable USB Disk.
I find that I am not allowed to d/load Mountain Lion from the App Store.
I wish to make a purchase. Why can't I?
Ezra

All he needs is the recovery disc assistant. It's a free download.
OS X: About Recovery Disk Assistant
http://support.apple.com/kb/ht4848

I got both a PC version and a mac version in my purchase but once i loaded to my PC it will not allow me to load to my Mac with same redemption number. Is there a way to do that?

i got both a PC version and a mac version in my purchase but once i loaded to my PC it will not allow me to load to my Mac with same redemption number. Is there a way to do that?

I was going to ask a similar question - we bought the boxed version of PSE11 with mac and pc disc - can we install the program on our mac as well as our PC? It's already on the PC but would be very handy to have it on Mac also. Thanks

HT4759 i downloaded the icloud to my pc it says to login with apple id and it says it is a valid apple id but not cloud but i cannot get the control panel for icloud to come up to set it up on my pc which runs windows 8

i downloaded the icloud to my pc it says to login with apple id and it says it is a valid apple id but not cloud but i cannot get the control panel for icloud to come up to set it up on my pc which runs windows 8

An update.
From iCloud Control Panel 2.1.1 for Windows
"iCloud Control Panel 2.1 and later includes support for Windows 8"
but you still need to set it up on a Mac or iOS device, "Note: To create an iCloud account you need an iPhone, iPad, or iPod touch with iOS 5 or later, or a Mac with OS X Lion v10.7.5 or later."

Why do I not see a photos icon on iCloud control panel alongside Mail, Contact, etc.?

Why do I not see a photos icon on iCloud control panel alongside Mail, Contact, etc.?
I downloaded iCloud for PC. I moved the photos I want to iCloud Shared folder, etc. but before we go there..... I do not see a photos icon on the iCloud control panel.

uninstall the control panel and redownload it from apple.com

HT201317 my computer (window 7) give me message "photo stream is not enabled. when i go to icloud control panel (version2 ) for activation. its not being activated. i tried many times but failed. i have activated photo stream on my iphone. please guide me

my computer (window 7) give me message "photo stream is not enabled. when i go to icloud control panel on computer (icloud version2 ) for activation. its not being activated. i tried many times but failed. when i check the photo stream option and apply its shows that its ok. and after closing when i again open icloud panel the photo stream option remains unchecked that means its not activated. please guide me.

Had the same problem. I uninstalled icloud, restarted my pc and reinstalled icloud and it's working fine. Hope this helps.

I am now using v3.68 and tried updating to v7.01 but it does not seem to work. Went to control panel to remove all the old versions but Firefox was not listed there although Thunderbird is there. Please advise asap, thanks

I am now using v3.6.8 and tried updating to v7.01 but it does not seem to work. Went to control panel to remove all the old versions but Firefox was not listed there although Thunderbird is there. Please advise asap, thanks

I recommend backing up your Firefox settings in case something goes wrong during the uninstall/reinstall process. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
In the Control Panel, Add/Remove programs, look for '''Mozilla Firefox'''. Make sure to save (do not delete) your personal settings when uninstalling.
If it isn't there, just try installing 3.6.23, which is the latest in the 3.6 family. You can download 3.6.23 here: http://www.mozilla.com/firefox/all-older
With respect to version 7.0.1, are you saying that the installation failed, or it seemed to work but it's nowhere to be found?

My bluetooth on my computer will not work. I have checked 'ON' and DISCOVERABLE in system preferences. I have restarted the computer.

My bluetooth on my computer will not work. I have checked 'ON' and DISCOVERABLE in system preferences. I have restarted the computer.

Since you can get them working, at least temporarily, make those Favorites. If that doesn't help, then go into your home folder library and move the following to the Trash (but don't empty the Trash--if this doesn't help, you can always use File>Put Back to restore it to its original location.)
In ByHost
com.apple.Bluetooth.<long string of characters and numbers>.plist
If you do this, you will need to reconfigure your Bluetooth settings. Might take screen shots of them first (Cmd-Shift-4) Setting up Bluetooth again will create a brand new preference file.
EDIT: That's in your home folder library>Preferences.

I've been getting the error message "The disk you inserted was not readable by the computer". I can't open system preferences, disk utility, or Time Machine. I'm guessing it has something to do with my external hard drive, although it hasn't been touched.

I've been getting the error message "The disk you inserted was not readable by the computer". I can't open system preferences, disk utility, or Time Machine. I'm guessing it has something to do with my external hard drive, although it hasn't been touched lately, but I can't figure out how to solve the problem. Any suggestions? Thank you!

Thanks for your quick response. I had a look at your discussion... I tried it on a Windows machine and I thought that was compatible with ExFAT?
Therefore I need to attempt to use my external hard drive with a machine that boasts OS X 10.6.5 or above and then it should work?
Thanks

Fiscal year 2010 Not allowed while creating Process order in COR1

Dear Friends,
We have gone SAP live in the month of October. The fiscal yeat we are using is 2011 as the client is Indian client. I have made the fiscal year variant for 2011 (V3). The FI document posting with Fiscal year 2011. It is also creating the Controlling document and Profit center document without any problem.
We have also made the period open as 2011 in MMpv and MMRV. The goods receipts is working fine and the finance entry and material document gets generated for the fiscal year 2011.
Now we are creating the process order in COR1 and getting the error message Fiscal year 2010 not allowed as below.
Fiscal year 2010 is not allowed
Message no. F5568
Diagnosis
The fiscal year entered (2010) is different from the fiscal year derived from the posting date and fiscal year variant (2011).
System Response
Error.
Procedure
Correct the fiscal year entered.
In KP26 we have maintianed for activity price for 2010 & 2011 and the system is picking the data for the fiscal year 2010 data and not the FY 2011 data.
I have checked in OKEQ (Costing version '0') The valide start date for FY2011 is 01.04.2010.
Is there any other place to maintain the fiscal year in Controlling area or Prodduction Planning???
I last my patient last 5 days doing R&D. Can any one help me where the fiscal year is picking and why it is picking FY 2010??
Regards,
Devendran

Hi Ajay,
Thank you for your comments. I have checked the Factory calendar and that is 2010 (January to December). We have tried to change to 2011 but the system automatically picking the date from January 1st 2011 to 31st December 2011. I am unable to create calendar year with date from 01.04.2010.
I have discussed with my PP consultant about this issue, he is telling the factory calendar nowhere related to Fiscal year. Do you have any idea how to change the factory calendar of 2011 from 01.04.2010 to 31.03.2011?? Is there any there reason why my system considering the Fiscal year 2010 instead of 2011???
Your inputs will defenitely help me to get an clue.
Regards,
Devendran

Purchase and release order not allowed for TECO work orders

Hi
We are typically setting maintenance work orders to TECO once the physical work as been performed as that sets the reference date for showing the history of when the maintenance was performed, and when the maintenance call was completed. However, we have invoices that may come in significantly later than when the physical work was performed.
Once the order is in TECO a purchase or release order (for services against a contract) cannot be created for the work order. Additionally it appears that even if we have a release order,or purchase order, if it is not for the exact amount of the invoice the release or purchase order cannot be ammended - we get the sameerror mssage (BS007) as when creating a new purchase order for the TECO order.
I had wondered about using BS22 to change TECO to continue to allow purchase and release orders when the order is in TECO status.
Any input on pros/cons or other approachs appreciated.
Philip

Thanks
That was what I initially thought. However I was informed that if the invoice is not for the originally determined amount that to post the invoice means having to change the PO, and changing the PO appears to hit the same business transaction as creating a PO, and so we get the error mssage.
The issue is that we may know we need to have services estimated at, say, $5.000. But we do not know what the actual final invoice will be. So the actual amount may end up being $4,500 or $5,500 as an example, and it may come ni late from the vendor. The Purchse Order side is not my expertize, but I am being informed that the invoice must match the PO amount, otherwise the PO must be ammended to match. As the order is in TECO, the user cannot amend the PO.
I would be happy to know of other options, or at least good questions to ask. I want the end user to be able to post the invoice against the PO, after the order is in TECO, even it the invoice amount is not exactly the same as what was originally anticipated.
regards
Philip

Not allowed to move load order of Control panels in System Preferences Tige

Similar Messages

Maybe you are looking for