Insert the data in sap tables from C SHARP application

Hi All,
I want to save some data in sap table from my CSharp(DOTNET) windows application.I tried with the help of SAP.Net Connector but that connector is not been supported visual studio 2005 or i not have visual studio 2003 .Soo plz any one can help how i can do this .
If any one have a idea then plz give me some example also how we did.
thanks
regards
sandeep Dabral

You have to use SAP .NET connetor to make interface with SAP. This is better way of doing interface between .NET and SAP.
You create web service (wsdl) in .NET 2003 and try to use that in .NET 2005.
You're getting the two technologies confused ......
.Net Connector is used for RFC-type interfaces. It calls Bapi's directly. Web services are not involved for this type of interface.
WSDL files are used to generate proxies for the .Net client to call Web Services (typically web-enabled Bapi's). This type of interface uses SOAP protocol not RFC and does not use the .Net Connector. Enterprise Web Services may be discovered using the .Net Enterprise Service Explorer, which is a different component from the .Net Connector.
Regards,
D.

Similar Messages

Can i change or modify or insert the data in standard tables

hi gurus
can i change /modify/insert the data in standard tables
witout using module pools
plz send the progem lines also
it ll be very helpful to me
thank you
kals.

Hi Kalyan,
It is not advisable to update standard tables directly or through your own module pool programs also. The reasons are,
1. It is difficult to find out how many tables are updated through the transaction. if we leave one table also as Mr.Andrew said data integrity will be lost.
2. Authorization objects and profiles will be totally bypassed if data is inserted through custom programs.
3. Complete data validation is not possible. There are certain validations that are executed through code and appropriate errors and warnings are shown in the transactions. If we insert data directly to the tables anything can be inserted into the table field violating all the validations unless we have field level check constraints on the tables at database level.
4. User Exits and BADIs that are implemented for specific business requirements and checks will not function on the data.
5. Update & Transaction locks will not work properly.
Due to above reasons, definitely you should avoid updating standard tables directly.
There are many tools such as LSMW Recordings, BDCs, BAPIs, IDOCs, Upload Interfaces available in SAP through which bulk data can be updated without using relevant transactions.
You can collect data from end users in text or excel sheets or through custom programs in required format and upload at once through above mentioned tools.
Regards,
Hema

Insert the data into two tables at a time.

Hi ,
i have these two tables
create table [dbo].[test1](
[test1_id] [int] identity(1,1) primary key,
[test2_id] [int] not null
create table [dbo].[test2](
[test2_id] [int] identity(1,1) primary key,
[test1_id] [int] not null
alter table [dbo].[test1]
add constraint [fk_test1_test2_id] foreign key([test2_id])
references [dbo].[test2] ([test2_id])
alter table [dbo].[test2] add constraint [fk_test2_test2_id] foreign key([test1_id])
references [dbo].[test1] ([test1_id])
I want to insert the data into two tables in one insert statement. How can i do this using T-SQL ?
Thanks in advance.

You can INSERT into both tables within one Transaction but not in one statement. By the way, you would need to alter your dbo.Test1 table to allow null for first INSERT test2_id column
See sample code below:
CREATE TABLE #test1(test1_ID INT IDENTITY(1,1),test2_id INT NULL)
CREATE TABLE #test2(test2_ID INT IDENTITY(1,1),test1_ID INT)
DECLARE @Test1dentity INT
DECLARE @Test2dentity INT
BEGIN TRAN
-- Insert NULL as test2_ID value is unknown
INSERT INTO #test1(test2_ID)
SELECT NULL;
-- get inserted identity value
SET @Test1dentity = SCOPE_IDENTITY();
INSERT INTO #test2(test1_ID)
SELECT @Test1dentity;
-- get inserted identity value
SET @Test2dentity = SCOPE_IDENTITY();
-- Update test1 table
UPDATE #test1
SET test2_ID = @Test2dentity
WHERE test1_ID = @Test1dentity;
COMMIT
SELECT * FROM #test1;
SELECT * FROM #test2;
-- Drop temp tables
IF OBJECT_ID('tempdb..#test1') IS NOT NULL
BEGIN
DROP TABLE #test1
END
IF OBJECT_ID('tempdb..#test2') IS NOT NULL
BEGIN
DROP TABLE #test2
END
web: www.ronnierahman.com

How to move the data of a table from sqlplus to XML file

Hi,
Could you pls guide me how to move the data of a table from sqlplus to XML file.
i want to do it from sqlplus rather than toad.pls help
Thanks

Oh..I'm in 9i.
Try this out..and let me know.
DECLARE
CTX DBMS_XMLGEN.CTXHANDLE ;
XML CLOB ;
F UTL_FILE.FILE_TYPE;
XMLC VARCHAR2(32767);
BEGIN
CTX := DBMS_XMLGEN.NEWCONTEXT('SELECT * FROM department1 ') ;
XML := DBMS_XMLGEN.GETXML(CTX) ;
XMLC:=TO_CHAR(XML);
SHOW_ENVELOPE(XMLC);
F := UTL_FILE.FOPEN('ATTACH_FILES','DEPT.XML', 'W');
UTL_FILE.PUT_LINE(F,XML);
UTL_FILE.FCLOSE(F);
END ;
Good luck!!!
Bhagat
null

How to insert the data system created table throuch RFC

How can i Insert any data system created table like MARC T100w .... throuh RFC.
I created Funstion module.
MY Email Address : [email protected]
[email protected]

Hello Chandan
It is pure madness to update or modify tables like MARC or T100W directly, whether on remote systems or locally.
If you need to update or modify such tables on remote system search for the appropriate <b>BAPI </b>(e.g. in case of MARC use BAPI_MATERIAL_SAVEDATA).
Regards
Uwe

Inserting the column values into table from view through procedure!!!

below is my example code
Create or replace procedure test_proc
is
cursor test_cur is
select a.col1 , b.col2, c.col3, d.col4, e.col5
from tableA a, tableB b, tableC c, tableD d, tableE e;
test_cur_rec test_cur%rowtype;
Begin
insert into test_stg ( col1, col2, col3, col4, col5, col6, col7)
Values ( test_cur_rec. col1,
test_cur_rec .col2,
test_cur_rec .col3,
test_cur_rec .col4,
test_cur_rec .col5
-- col6, col7 );
create view test2 (
select f.col6, g.col7 from tableF f,tableG g);
I m trying to insert values into the table test_stg but for col6 and col7 i need to get the data from the view test2.
In simple word, all i need to do is get the 2 columns data from view and insert into a table through procedure. The above code is the example which looks very much like my actual code.
How do i accomplish this task ??

well there is joining condition for a, b,c ,d, e tables, i have not mentioned here. The where condition has nothing to do with the other two columns of the view.
There is no relation ship between the these tables the view. The col 6 and 7 i m inserting from view is sysdate timestamp and the job_id number.
so its pretty straight forward insertion into the table from view columns. These two columns has just one row with id number and timestamp. so i need to insert these data into the the table when i run a procedure.
Thank you so much!!!

Insert CSV data into a table from URL

Hi,
How can I insert the CSV data directly into a database table (the csv format is known, the database table is created accordingly)?
Thanks
Devang.

Devang,
There is a limit on the amount of text (32767) you can paste and upload.
I created a process that allows the user to upload a .csv file and it is then written (UTL_FILE) to a known file on the db server. I have an external table definition mapped to that file so I don't have to do any parsing or anyting.
This should work for your situation since you already know the format of the file and the table is already created.
Hope this helps.
chet

Accessing SAP Tables from a Java application

Hi,
I know, the forum is called "Web Application Server" but because it's Java question I hope to get answers here.
I have a small stand-alone Java application that needs to access (read-only) all records from a SAP table. Is there a possibility to do this without writing a BAPI before?
thanks a lot
Paul

Hi Paul,
You can use JCo to call the standard remote-enabled function RFC_READ_TABLE. There is one annoyance involved with this function, though: each row of data returned is packed into a single string, so you must either specify a delimiter and use e.g. String.split(...) to parse out the column values or use the returned metadata to extract each value based on position and length attributes of the column.
Another option (although this is usually not allowed in a productive environment) is to establish a direct JDBC connection to the database, thus bypassing the ABAP application layer entirely.
Regards,
Thorsten

Inserting a record into ORACLE table from a webdynpro application

Hi,
From My webdypro code I have 10 attributes which are need to be inserted into a ORACLE DB table. Can anyone suggest me how to achieve it or Can you please point me a tutorrial which can help on it.
All the attributes will be inserted in a single record.
Thanks,
James

check this code
Created on Oct 18, 2007
To change the template for this generated file go to
Window>Preferences>Java>Code Generation>Code and Comments
package com.psft;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.Statement;
import java.util.ArrayList;
import java.util.StringTokenizer;
@author BALU
To change the template for this generated type comment go to
Window>Preferences>Java>Code Generation>Code and Comments
public class DataBaseDAO
     ResultSet rs;
     int qID = 1;
     int noOfChoices=0;
     Connection con;
     Statement stmt;
     public DataBaseDAO()
          try{
               /*Class.forName("oracle.jdbc.driver.OracleDriver");
           con=DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:XE","bduvvuri","dbsub516");
           stmt = con.createStatement();*/
           DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
           Class.forName("oracle.jdbc.driver.OracleDriver");
           String s ="jdbc:oracle:thin:@192.168.9.34:1527:ep7";
           con=DriverManager.getConnection(s,"user1","welcome1");
           stmt = con.createStatement();
          }catch(Exception e){}
     public int register(String name,String pass,String emailid){
          int i =0;
          try{
               PreparedStatement ps = con.prepareStatement ("Insert into USERS(username,password,email) values (?,?,?)");
               ps.setString( 1, name);
               ps.setString( 2, pass);
               ps.setString( 3, emailid);
               i = ps.executeUpdate();
               }catch(Exception e){
               System.out.println("ee"+e.getMessage());
          return i;
xxxxxx (please read forum rules)
Edited by: Armin Reichert on Jan 17, 2008 10:17 AM

Data extraction into sap table from legacy oracle database

Hello All,
    I have a scenario where I have two different software systems (SAP and xyz systems), where a intermediate table will be created in between the two systems that is shared. Data will be updated by the xyz systems into this shared table. Now, my questions regarding this shared table.
   1) Can we write some program or something to get the data from shared table to update the SAP?
   2) If possible send me the suggestions
   3) Please also send me the sample code to get the data from the shared table
Thanks in advance,
SDN powered

this shared table should be compatiable to sap fields...write code to fetch data from this table and assign data to appropriate fields in SAP and insert the data into sap.
1. Push mechanism
Write a RFC on SAP side to insert entries into the table.
Call the RFC from xyz application passing the data you want to insert.
2. Pull mechanism
Write a ABAP Program, where you can somehow read the data of the xyz application and insert data into the table.
3. Flat file
Dump the data from xyz application into the file.
Write a ABAP program to read the file and update the table.

Insert the data automatically in a table

Hi,
i want to insert the data in a table automatically if the time is 12:00AM
Is it possible?

hi,
i have the table "tab_eg" like
id name code
1 Rai 1
2 Hewlett 3
id is primary key.
code is auto generated.
(ie) if anybody is getting the code from tab_eg table,
the code is automatically incremented by 1 using update query.
It is working fine.
Then
i am creating the DBMS_SCHEDULER like this:
BEGIN
DBMS_SCHEDULER.CREATE_JOB (
job_name => 'UPDATE_TAB_CODE',
job_type => 'PLSQL_BLOCK',
job_action => 'begin execute '' update scott.tab_eg SET code = 1 '' ; commit; end;',
start_date=> '01/APR/2007 12:00:00 AM',
repeat_interval => 'FREQ=YEARLY',
enabled => TRUE);
END ;
it is also created successfully in SYS.
My doubt is
when i have changed the server time as '01/APR/2008 12:00:00 AM',
the code is not reset to 1.
i want to reset the code as 1.
what do i have to change in this DBMS_SCHEDULER.
Thanx in Advance

Need to save the data in mutiple tables

Dear Experts,
I need to insert the data ,which is accepted from the user at runtime using table control and also generate automatic number when clicked on the save button the data should be in the database as well.
I am new to module pool, your help is reqd. The user will be awarded ample points if answered correctly.
regards,
Rachel

Hi Rachel,
For automatic number generation you need to create number range object using tcode SNRO and then use the foolowing logic.
*&      Form GET_NEXT_NUMBER
      text
--> p1        text
<-- p2        text
FORM get_next_number .
DATA: w_quant   LIKE inri-quantity,    "dummy
        w_code    LIKE inri-returncode. "returncode
To lock the number range object
CALL FUNCTION 'NUMBER_RANGE_ENQUEUE'
    EXPORTING
      object           = 'ZNUM'
    EXCEPTIONS
      foreign_lock     = 1
      object_not_found = 2
      system_failure   = 3
      OTHERS           = 4.
To raise the exception to the corresponding exception of
'NUMBER_RANGE_ENQUEUE'
IF sy-subrc NE 0.
    MESSAGE e368(00) WITH text-006."'Object is not found'
ENDIF.                         "IF sy-subrc NE 0
To get the next number from the object
CALL FUNCTION 'NUMBER_GET_NEXT'
    EXPORTING
      nr_range_nr             = 'Z2'
      object                  = 'ZNUM'
      toyear                  = '2008'
    IMPORTING
      number                  = l_lbc_next
      quantity                = w_quant
      returncode              = w_code
    EXCEPTIONS
      interval_not_found      = 1
      number_range_not_intern = 2
      object_not_found        = 3
      quantity_is_0           = 4
      quantity_is_not_1       = 5
      interval_overflow       = 6
      buffer_overflow         = 7
      OTHERS                  = 8.
IF sy-subrc <> 0.
    CLEAR ok_code.
    MESSAGE e368(00) WITH text-006."'Object is not found'
ENDIF.               "IF sy-subrc <> 0
To unlock the number range object
CALL FUNCTION 'NUMBER_RANGE_DEQUEUE'
    EXPORTING
      object           = 'ZNUM'
    EXCEPTIONS
      object_not_found = 1
      OTHERS           = 2.
IF sy-subrc NE 0.
    CLEAR ok_code.
    MESSAGE e368(00) WITH text-006."'Object is not found'
ENDIF.              "IF sy-subrc NE 0
ENDFORM.                    " GET_NEXT_NUMBER
And for table control logic
see the below link.
Table control of Module Pool Program
Regards,
Raju

Inserting the data into other schema..

Hi,
Can any body help me to write the pl/sql code to insert the data into other schema
eg: A and B two schemas are there
In B there is a table with the name EM_Rep. When i was writting the pl sql code to insert the data into B.EM_Rep from A Schema it is throughing an error like
PL/SQL: ORA-00942: table or view does not exist
Note: I have given the grant like
connected to user b
sqL> grant insert on EM_Rep to A;
PROCEDURE INS_EM()
AS
BEGIN
insert into B.EM_Rep values('999999','test');
END;
its throughing an error like table doesnot exist....
can any body tell ..how to write ...
Thanks,

It worked for me
SQL> grant connect, resource to a identified by a;
Grant succeeded.
SQL> grant connect, resource to b identified by b;
Grant succeeded.
SQL> connect b/b
Connected.
SQL> create table em_rep (col1 varchar2(10), col2 varchar2(10));
Table created.
SQL> grant insert on em_rep to a;
Grant succeeded.
SQL> connect a/a
Connected.
SQL> create or replace
2 PROCEDURE INS_EM
3 AS
4 BEGIN
5 insert into B.EM_Rep values('999999','test');
6 END;
7 /
Procedure created.
SQL> exec ins_em;
PL/SQL procedure successfully completed.
SQL> commit;
Commit complete.
SQL> connect b/b
Connected.
SQL> select * from em_rep;
COL1 COL2
999999 test
SQL>

How to insert the data from XML to a table

Hi,
I'm using Oracle 10g Express Edition
I need help in How to insert the data from XML file into the table.
Below is the example i'm working on..
I have create ridb user with below mentioned privileges:
Account Status Locked Unlocked
Default Tablespace: USERS
Temporary Tablespace: TEMP
User Privileges :
Roles:
CONNECT
RESOURCE
Direct Grant System Privileges:
CREATE DATABASE LINK
CREATE MATERIALIZED VIEW
CREATE PROCEDURE
CREATE PUBLIC SYNONYM
CREATE ROLE
CREATE SEQUENCE
CREATE SYNONYM
CREATE TABLE
CREATE TRIGGER
CREATE TYPE
CREATE VIEW
& table is created TRIALZIPCODES below mentioned is the DDL:
CREATE TABLE TRIALZIPCODES
STATE_ABBR VARCHAR2(20) NOT NULL
, ZIP_CODE NUMBER(10, 0) NOT NULL
, ZIP_CODE_EXT VARCHAR2(20)
Below is the XML FILE: which is stored in C:\OracleProject Folder
File name: trial.xml
<?xml version="1.0" ?>
<metadata>
- <Zipcodes>
- <mappings Record="4">
<STATE_ABBREVIATION>CA</STATE_ABBREVIATION>
<ZIPCODE>94301</ZIPCODE>
</mappings>
- <mappings Record="5">
<STATE_ABBREVIATION>CO</STATE_ABBREVIATION>
<ZIPCODE>80323</ZIPCODE>
<ZIP_CODE_EXTN>9277</ZIP_CODE_EXTN>
</mappings>
</Zipcodes>
</metadata>
PL/SQL Procedure:which i'm trying to execute from SQLDeveloper
create or replace
PROCEDURE TRIAL AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
begin
-- DBMS_XMLGEN.setRowTag ( ctx IN ctxHandle, rowTag IN VARCHAR2);
-- DBMS_XMLGEN.setRowSetTag ( ctx IN ctxHandle, rowSetTag IN VARCHAR2);
-- the name of the table as specified in our DTD
DBMS_XMLGEN.SETROWSETTAG(l_context_handle,'zipcodes');
-- the name of the data set as specified in our DTD
DBMS_xmlgen.setRowTag(l_context_handle,'mappings');
-- for getting the output on the screen
dbms_output.enable(1000000);
-- open the XML document in read only mode
v_FileHandle := utl_file.fopen('c:/OracleProject','trial.xml', 'r');
loop
BEGIN
utl_file.get_line(v_FileHandle, charString);
exception
when no_data_found then
utl_file.fclose(v_FileHandle);
exit;
END;
dbms_output.put_line(charString);
if finalStr is not null then
finalStr := finalStr || charString;
else
finalStr := charString;
end if;
end loop;
-- for inserting the XML data into the table
insCtx := DBMS_XMLSTORE.NEWCONTEXT('RIDB.TRIALZIPCODES');
insCtx := DBMS_XMLSTORE.INSERTXML(insCtx, finalStr);
dbms_output.put_line('INSERT DONE '||TO_CHAR(rowsp));
DBMS_XMLStore.closeContext(insCtx);
END;
END TRIAL;
For the first time when i complied i got the errors as :
Procedure RIDB.PROCEDURE1@RIDB
Error(16,14): PLS-00201: identifier 'UTL_FILE' must be declared
Error(16,14): PL/SQL: Item ignored
Error(29,1): PLS-00320: the declaration of the type of this expression is incomplete or malformed
Error(29,1): PL/SQL: Statement ignored
Error(33,1): PL/SQL: Statement ignored
Error(33,19): PLS-00320: the declaration of the type of this expression is incomplete or malformed
Error(36,1): PL/SQL: Statement ignored
Error(36,17): PLS-00320: the declaration of the type of this expression is incomplete or malformed
So i logged in as sys & grant the permission to execute on UTL_FILE to ridb (user):
SQL Statement:
grant execute on utl_file to ridb
So, it got compiled successfully but when i execute it gives me error as:
Source does not have a runnable target.
What does this mean?
So I browse through forum & i got to know that i need to initial the UTL_FILE_DIR ="C:/OracleProject" in init.ora
So can i edit the init.ora with notepad.When i tried to do that it says permission denied
In my system it shows the init.ora file in path C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts
but there is also other file initXETemp in the same path do i need to do the changes in it.
I have tried even editing the SPFILE as mentioned below:
C:\oraclexe\app\oracle\product\10.2.0\server\dbs\SPFILEEXE - I had edit this file using notepad & set the value of UTL_FILE_DIR ="C:/OracleProject". So next time when i restarted i'm unable to log on to the database.
So i had reinstall the software again.
Could you please let me know how to proceed..

hi,
I have created the directory from sys database
CREATE or replace DIRECTORY XML_DIR2 AS 'C:\OracleProject';
& grant read,write access to the user
grant read,write on directory XML_DIR2 to RIDB;
& i had change the tag name in the xml file as shown below:
<?xml version = '1.0'?>
<metadata>
<Zipcodes>
<mappings Record="4">
<STABBRE>CA</STABBRE>
<ZIPCODE>94301</ZIPCODE>
</mappings>
<mappings Record="5">
<STABBRE>CO</STABBRE>
<ZIPCODE>80323</ZIPCODE>
<ZIPCODEEXT>9277</ZIPCODEEXT>
</mappings>
</Zipcodes>
</metadata>
TRIALZIPCODE table as shown below:
CREATE TABLE "RIDB"."TRIALZIPCODE"
(     "STABBRE" VARCHAR2(20 BYTE),
     "ZIPCODE" NUMBER(*,6) NOT NULL ENABLE,
     "ZIPCODEEXT" NUMBER
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
I have tried two methods as shown below:
Procedure 1:
create or replace
PROCEDURE TRIAL_V2 AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
cnt NUMBER;
xmldoc xmltype := xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') );
--XML_DIR VARCHAR2(40) := 'C:\\OracleProject';
BEGIN
insCtx := DBMS_XMLStore.newContext('DEV.TRIALZIPCODES');
DBMS_XMLStore.setUpdateColumn(insCtx, 'STABBRE');
DBMS_XMLStore.setUpdateColumn(insCtx, 'ZIPCODE');
DBMS_XMLStore.setUpdatecolumn(insCtx, 'ZIPCODEEXT');
DBMS_XMLStore.setRowTag(insCtx, 'mappings');
cnt := DBMS_XMLStore.insertXML(insCtx, xmldoc);
DBMS_XMLStore.closeContext(insCtx);
END;
Procedure 1 was compiled with out errors but when i execute i got the error as :
Source does not have a runnable target.
Procedure 2_
CREATE OR REPLACE PROCEDURE TRIAL_V3 AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
cnt NUMBER;
xmldoc xmltype := xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') );
--XML_DIR VARCHAR2(40) := 'C:\\OracleProject';
BEGIN
INSERT INTO trialzipcode (STABBRE, ZIPCODE, ZIPCODEEXT)
SELECT extractvalue(x.column_value, 'mappings/STABBRE'),
extractvalue(x.column_value, 'mappings/ZIPCODE'),
extractvalue(x.column_value, 'mappings/ZIPCODEEXT')
FROM TABLE(
XMLSequence(
EXTRACT(
xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') ),
'metadata/Zipcodes/mappings'
) x
END;
END TRIAL_V3;
Procedure 2 was complied without errors but when i execute i got the error as:
Connecting to the database RIDB.
ORA-22288: file or LOB operation FILEOPEN failed
The system cannot find the file specified.
ORA-06512: at "SYS.DBMS_LOB", line 523
ORA-06512: at "SYS.XMLTYPE", line 287
ORA-06512: at "RIDB.TRIAL_V3", line 12
ORA-06512: at line 2
Process exited.
Disconnecting from the database RIDB.
Could you please let me know how to proceed...

How to insert data into a table from an xml document

using the XmlSql Utility, how do I insert data into a table from an xml document, using the sqlplus prompt.
if i use the xmlgen.insertXML(....)
requires a CLOB file, which i dont have, only the xml doc.
Cant i insert directly from the doc to the table?
the xmlgen examples I have seen first convert a table to a CLOB xmlString and then insert it into another table.
Isnt there any other way?

Your question is little perplexing.
If you're using XML SQL Utility from
the commandline, just use putXML.
java OracleXML putXML
null

Insert the data in sap tables from C SHARP application

Similar Messages

Maybe you are looking for