How to delete forecast entries with zero current and original qty from a particular forecast set which span across multiple forecasts

how to delete forecast entries with zero current and original qty from a particular forecast set which span across multiple forecasts

Hi,
There is no way to delete those records selectively from front end.
The best possible way is to delete the records from MRP_FORECAST_DATES tables from backend.
Hope that helps!!
Regards,
Mohan Balaji
NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers.

Similar Messages

How to delete table entries with SE16 in debugging mode?

We are trying to delete some table entries which cause our InfoPackage short dumps in BW system. The problem is that we can only see the Display menu item with SE16 and the Delete menu item is dimmed that we are unable to conduct the deletion. SAP Support suggest to use debug with SE16 to do the deletion, but we can't figure out how!
Anyone's idea is greatly appreciated!

Then you are not at the right place.   Lets start at the begining.
Go to SE16.
Enter table name.
Hit F7.
Enter selection criteria.
hit F8.
Double click the specific record that you want to delete.
In the transaction code field at the top, enter "/H" and hit enter. Debug is switch on.
Now hit enter again.
You should now be in debug and you should see this code..
form set_status_val tables ntab structure x031l
                    using code name next for_lines.
field-symbols: <field>.
refresh exclude_tab.
if code = 'SHOW'.
    set titlebar 'TAB' with name 'anzeigen'(100).
elseif code = 'EDIT'.
    set titlebar 'TAB' with name 'ändern'(101).
elseif code = 'INSR'.
    set titlebar 'TAB' with name 'einfügen'(102).
elseif code = 'ANVO'.
    set titlebar 'TAB' with name 'einfügen'(102).
elseif code = 'DELE'.
    set titlebar 'TAB' with name 'löschen'(103).
Notice that there is a field called CODE in the IF statement.
Now enter the word "CODE" in the field names list, change the value to DELE and click the pencil. Hit F8. Now you can delete the entry.
Regards,
Rich Heilman

How to delete icloud account with no password and email is invalid

My mother updated her iphone 4 with IOS 7 and signed up for the iCloud and activated the "Find my phone app". She can't remember her the password that she initially entered. On top of that, when she set up the account she typed a ".con" instead of ".com" on her email account. Since that is not a real email account we can't reset the password/ We have already fixed her appleID, to have the "m" instead of the "n" ,and password but because it doesn't match the account on iCloud we can't do much.
so in summary:
-we have to put in a password because the "Find My Phone" app is activated
-she can't remember the password
-the password can't be reset because the email entered has an "n" instead "m" so we can't get a resend email.

Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
xianwest wrote:
-we have to put in a password because the "Find My Phone" app is activated
-she can't remember the password
-the password can't be reset because the email entered has an "n" instead "m" so we can't get a resend email.
See Here... ask to speak with the Account Security Team...
Apple ID: Contacting Apple for help with Apple ID account security
Or Email Here > Apple Support iTunes Store Contact
Good Luck.

HT201269 how do I merge multiple duplicate contact entries with cell home and e-mail entries

how do I merge multiple duplicate contact entries with cell home and e-mail entries?

Try linking cards:
Open any contact you want to merge, tap on Edit and look at the bottom part of it. You'll find 'Link Cards' and from there you may select the contact you want to link with the one you're looking at. So if you have:
Contact 1: John A (job)
Contact 2: Business Name (who is also John A but you saved it as a different contact)
Contact 3: Something else that's also John A
You can link all three cards into one. If you choose to, you may unlink them at any time, just tap Edit and then the red circle. Your contacts won't be deleted, but they won't appear under the same ID anymore.

How to delete the file with space in name

Hi
I want to delete the file "test ex.txt" file.
i run the following command in command prompt.i can delete the file successfully.
/bin/rm -f /mnt/"test ex.txt"
I want to run the command from java.So i am using the following code
String cmd = "/bin/rm -f /mnt/\"test ex.txt\"";
Runtime rt = Runtime.getRuntime();
process = rt.exec(cmd);
The file was not deleted.
How to delete the file with space in name?
Help me

Use the form of exec that takes an array of command + args.
arr[0] = "/bin/rm"
arr[1] = "-f"
arr[2] = "/home/me/some directory with spaces";Or use ProcessBuilder, which is the preferred replacement for Runtime.exec, and which Runtime.exec calls.

How to delete all mails with one klick?

It's annoying to delete every single mail.
How to delete all mails with one klick, like in the paperbasket?
Thanks

If the emails have been previously deleted (I.e. in the trash folder), tap Edit at the top of the list. You should see a delete all button at the bottom. If the messages are in a standard folder, they need to be handled one at a time.

How to Display WBS's with Zero values in a report created by CJE2

Hi All,
I have created a report using CJE1 (Report painter). When I execute the report, it only shows WBS that have values. How do I display WBS elements that do NOT have values? i.e. display items with zero values. I'm certain there is a setting either within report painter or forms...
Help appreciated.
Samir

Menu>Formatting>Report Layout and then tab Rows. Check if setting under 'Treatment of zero rows' helps.
Regards
Sreenivas

How to delete one entry in "documents & data" of icloud?

It seems some application saves settings in "documents & data", but the application has been removed already.
I do not know how to delete the entry.
Anyone can help me?
Thanks!

Hello mende1,
I follow your suggestion many times but it does not work still.
The record "Ruler for iPad and iPhone..." fails to disappear.

Can someone tell me how to create accounting entries with the account status as error

Hi,
Can someone tell me how to create accounting entries with the
account status as error?
Thanks!!
Danny

It's call fixed/static background, and it is NOT directly support by iweb, you will need post processing either in html or javascript.
Varkgirl (you need to search the previous forum) and I did it since iweb1:
try Safari, and scroll: http://www.geocities.com/[email protected]/Links.html
invisible link? roddy, fishing for info again?

How to delete photos taken with iPad in iOS7?

Before iOS 7 one could delete photos taken with iPad. Now there does not appear any DELETE button in ios7 ?
WHAT.?

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
iPhoto for iOS (iPad): Delete photos from iPhoto
http://support.apple.com/kb/ph3137
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
Delete Pictures from Your iPad
http://www.dummies.com/how-to/content/delete-pictures-from-your-ipad.html
 Cheers, Tom

Dunning letters printing with zero balance and no invoice listing

How to trouble shoot 'Dunning letters printing with zero balance and no invoice listing' problem

As per my understanding it could be due to OB22 settings.
refer following SAP notes
335608,191927,
373296

BPM question - Delete all entries in a table and Insert data

Hello,
I'm new to PI BPM and have this scenario to implement.
I'm supposed to delete all entries in a table and then insert data to the same table.
Is BPM necessary? If it is, what is the best practice to implement my scenario?
I want to make sure that all entries were successfully deleted before insert data.
How do I check if all entries in the table were deleted successfully before
initiating insert.
Thank you.
-Won

Hi Won,
Yes, this is possible without BPM.
You have to create 2 separate mappings, each for deleting & inserting the records.
You will have 2 different Interface mappings as well.
But in ID, create a single interface determination.
In that, configure Deletion interface mapping first and in the second row, configure Insertion interface mapping.
Please make sure that the parameter 'Mainain Order At runtime' is checked in interface determination.
-Supriya.

How can I modify one column of current and next record depending of some criteria?

Having DDL
CREATE TABLE #ServiceChange(
[ID] [int] identity(1,1),
[SHCOMP] [char](2) NOT NULL,
[SHCRTD] [numeric](8, 0) NOT NULL,
[SHCUST] [numeric](7, 0) NOT NULL,
[SHDESC] [char](35) NOT NULL,
[SHTYPE] [char](1) NOT NULL,
[SHAMT] [numeric](9, 2) NOT NULL,
[CBLNAM] [char](30) NOT NULL,
[GROUPID] [char](2) NULL
And original and desire data in below link
https://www.dropbox.com/sh/bpapxquaae9aa13/AADnan31ZASublDjN7sa2Vvza
I would like to know how can I modify one column of current and next record depending of some criteria using SQL2012?
The criteria is:
Type should always flow F->T
if current abs(amount)> next abs(amount) then groupid = 'PD'
if current abs(amount)< next abs(amount) then groupid = 'PI'
there is no case when those amounts will be equals
where current(custid) = next(custid) and current(service) = next(service) and groupid is null
Any help will be really apreciated.
Thank you

I tried that and got this error
'LAG' is not a recognized built-in function name.
You said you were using SQL 2012, but apparently you are not. The LAG function was added in SQL 2012. This solution works on SQL 2005 and SQL 2008:
; WITH numbering AS (
   SELECT groupid,
rowno = row_number() OVER (PARTITION BY custid, service ORDER BY date, id)
   FROM   #ServiceChange
), CTE AS (
   SELECT a.groupid,
CASE WHEN abs(a.amount) < abs(b.amount) THEN 'PD'
   WHEN abs(a.amount) > abs(b.amount) THEN 'PI'
END AS newgroupid
   FROM numbering a
   JOIN numbering b ON b.custid = a.custid
AND b.service = a.service
AND b.rowno   = a.rowno - 1
UPDATE CTE
SET   groupid = newgroupid
Erland Sommarskog, SQL Server MVP, [email protected]

How can I use LCCS with ActionScript 3 and Flash CS4?

Hi,
Using Stratus I was able to create an an application using Action Script 3 and Flash CS4. The sample code on the Adobe site was quite straight forward and easy to understand. I now want to switch over to LCCS but can't find anything any where on how to use Action Script 3 and Flash CS4 with LCCS. Do I need to know Flex to be able to use LCCS? Everything was quite simple and easy to understand with Stratus and makes complete sense. But LCCS is really confusing. Is there any sample code on how to establish a connection in Action Script 3 and then stream from a webcam to a client. There is nothing in the LCCS SDK that covers Flash and Action Script 3. Please help! I found the link below on some forum but it takes me nowhere.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=75 9&threadid=1407833&enterthread=y

Thanks Arun!
Date: Thu, 29 Apr 2010 11:44:10 -0600
From: [email protected]
To: [email protected]
Subject: How can I use LCCS with ActionScript 3 and Flash CS4?
Hi,
Welcome to the LCCS world.
Please refer to the SDK's sampleApps folder. There would be an app called FlashUserList. The app demonstrates how LCCS can be used with Flash CS4. Its a pretty basic app, but should help you moving.
We are trying to improve our efforts to help developers in understanding our samples. Please do let us know if we can add something that would help others.
Thanks
Arun
>

How to create a table with datatype blob and insert a pdf file (ravi)

how to create a table with datatype blob and insert a pdf file,
give me the explain asap
1.create the table?
2.insert the pdffiles into tables?
3.how to view the files?
Thanks & Regards
ravikumar.k
Edited by: 895044 on Dec 5, 2011 2:55 AM

895044 wrote:
how to create a table with datatype blob and insert a pdf file,
give me the explain asapPerhaps you should read...
{message:id=9360002}
especially point 2.
We're not just sitting here waiting to answer your question as quickly as possible for you.

How to delete forecast entries with zero current and original qty from a particular forecast set which span across multiple forecasts

Similar Messages

Maybe you are looking for