How to delete Layout variants
Dear Experts,
As we have transaction SHD0 to Create or Delete Transaction and Screen variants. Do we have any transaction to delete layout variant in ALV?
I have to delete some layout variants in Interactive ALV report.
Thank You,
Best Regards
Venki
Did you explore?
Settings > layout > layout management-> Edit - delete layout or trash
Similar Messages
-
How to delete the Variants?.
Hi Friends,
I have created Variants for MD process chains to be scheduled perodically. There are about 5 Process chains and for each process chain i have created a variant in SE38 , and i have scheduled each of them in the background job periodically.
Now I have to create a Variant only for Meta chain, i have done that. But i need to delete the Variants for each of those process chains which i have created. How to delete the Variants?.
Can anyone please help me.
Thanks in Advance.
BNYou can delete variant from process chain with the below ways...
U can delete variants from table RSPCVARIANT (also see RSPCVARIANTATTR).
OR
If u wanted delete complete process chain (including process variant), U can delete PC from table RSPCCHAIN (see also RSPCVARIANTATTR)
OR
You can find Delete Feature in the Variant Itself. Open a variant - Delete
OR
when you edit the process chain, right click on the process and select maintain variant. On the next screen you have a delete button.
OR
you can use debugging to delete the variant if you are good at ABAP.
Thanks,
Saveen Kumar -
Delete layout variant in the ALV
Does anyone know how to delete the function 'layout variant' int the ALV of the ABAP web dynpro?
So the pulldown menu won't be visible on the header of the ALV screen?I found the answer in the model class of the ALV
-
How to delete the variant in report
Hi Friends ,
i am unable to delete the Variant from the Report.
please find the error in attached screen shot.
Regards,
Muralidhar.Hi ,
You can check weather variant is protected or not in table VARID and field 'Indicator' by passing your variant name in field 'Variant'..
https://help.sap.com/saphelp_nw70/helpdata/en/c0/98038ce58611d194cc00a0c94260a5/content.htm
please check this link it shows how to make a variant protected... ex: if you create a variant and make it protected then only you can make the value changes in that variant it won't allow other users to make changes in the values.
RSVARENT this is the program which cancels the protected variants..
Regards,
Nitin -
How to delete Process Variants in Process chain
Hello,
I created few test Process Variants I would like to delete how can we delete those?
Thanks,I created few process variants but i did not saved those in process chain so i can not edit those in process chain
when I am trying to create new process chain in the popup window still showing old variants how to delete those
Thanks, -
HI ,
Can anybody tell me how to delete created by users in CRM .
Actually there are some layouts created in out CRM system in CICO tcode which needs to be deleted .
But we are unable to find the delete layout opton in CICO tcode
Thanks in Advance .
Dhaval Raje.Hi
Dont know much abt CRM & CICO,,
Try this option...
GO to SE80 for ur transaction..
It will display all the screens for CICO..
Expand on Screen, it displays all screens..
Select ur User Screen..Right Click and choose delete...
Hope it will give some idea..
Thanks
Praveen -
Urgent - How to delete a variant in F110 (automatic payment program)
Hello,
I want to delete a variant created in printout medium tab. Please guide me.
version- 4.6c
Thanks in advance.
Regards,
JayHello All,
I got the solution, we need to follow the following steps to delete the variant from print payment tab of F110 permanently.
1) Enter transaction SE38
2) Enter the print program name (e.g. ZRFFOUS_C)
3) Select variant tab
4) Click on change tab
5) Select the variant that needs to be deleted.
6) Click on Delete tab.
Regards,
Jay -
How to pass layout variant in background job?
Dear Gurus,
I have set layout variant as PARAMETERS in my program.
The report will be executed successfully in front-end, but if I set it in background , it will pop up error msg: Program (IS_VARIANT-REPORT) not specified.
But the alv function I have check...
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_BYPASSING_BUFFER = 'X'
I_CALLBACK_PROGRAM = W_REPID
I_GRID_TITLE = V_GRID_TITLE
I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
* I_CALLBACK_USER_COMMAND = 'FORM_USER_COMMAND'
* I_STRUCTURE_NAME = 'ZSDS0005'
I_SAVE = 'A'
IS_LAYOUT = I_LAYOUT
* IS_VARIANT = STRU_DISVAR
IS_VARIANT = DEF_VARIANTE_F4
IT_FIELDCAT = I_FIELDCAT_ALV[]
IT_SORT = XT_SORT[]
TABLES
T_OUTTAB = IT_OUT
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
JamieThank you so much, but the sample code have one bug, and I have already modified the code.
The variant will be caught only after clicking F4 list, if there's already one default variant, system will ignore it.
AT SELECTION-SCREEN.
* Validating selection screen fields
PERFORM F_AT_SELECTION_SCREEN.
*& Form f_at_selection_screen
* text
* --> p1 text
* <-- p2 text
FORM F_AT_SELECTION_SCREEN .
* ALV Layout variant
IF NOT P_VARI IS INITIAL.
MOVE GX_VARIANT TO G_VARIANT.
MOVE P_VARI TO G_VARIANT-VARIANT.
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
EXPORTING
I_SAVE = 'A'
CHANGING
CS_VARIANT = G_VARIANT.
GX_VARIANT = G_VARIANT.
ELSE.
PERFORM F_INITIALIZE_VARIANT.
ENDIF.
ENDFORM. " f_at_selection_screen
*& Form f_initialize_variant
* text
* --> p1 text
* <-- p2 text
FORM F_INITIALIZE_VARIANT .
* CLEAR DEF_VARIANTE_F4.
* gv_save = 'X'.
GX_VARIANT-REPORT = SY-REPID.
* DEF_VARIANTE = DEF_VARIANTE_F4.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
I_SAVE = G_SAVE
CHANGING
CS_VARIANT = GX_VARIANT
EXCEPTIONS
NOT_FOUND = 2.
IF SY-SUBRC = 0.
P_VARI = GX_VARIANT-VARIANT.
ENDIF.
ENDFORM. " f_initialize_variant -
Thanks.
Hi,
Deleting Variants Procedure
1.Open the appropriate variant as described in Creating a Variant.
2.On the initial screen, choose Variants ® Delete.
3.The ABAP: Delete Variants dialog box appears.
4.Choose whether you want to delete the variant in all clients, or only in the current client.
5.Confirm your choice.
Result
Reward If Helpfull,
Naresh. -
Hi.
In process chain maintenance I have several process variants which
are used nowhere.
I can't remove them because when I am trying to do that by pressing
Delete button, no action is performed.
Is there another transaction where I can remove process variants
or what may be possible reason of strange behaviour of Delete button
in the RSPC transaction?Hi,
The ways :
1.You can find Delete Feature in the Variant Itself. Open a variant - Delete
2.In the process do F4 and get the variant into the chain - delete now.
3.when you edit the process chain, right click on the process and select maintain variant. On the next screen you have a delete button.
Regards
CSM Reddy -
Delete the variants of a query from SAP GUI
Hi all,
We have migrated queries from 3.5 to 7.0, and now we are migrating their variants also.
But while migrating variants we got a situation where some variants got copied but not activated in 7.0.
so now we want to delete those variants and migrate it again as they are not being over written.
so, my question is how can we delete variants for a query in one shot from SAP GUI.
plzz....help asap.Hi,
note : 1003481... makes the point that...
But the variant cannot be migrated when a variant with same technical name already exists in 'new' variant storage
would it be possible that the variant that you are trying to migrate shares a tech name with one already on the system?
to check variant tables for tech names used twice....
tx: se16
a)rsrvariant, (3x variants)
c)rsrparametrizat(bi 7 made variants)
variants that appear in rsrvariant (3x) will not migrate if the same
tech name appears already in rsrparametrizat (new storage area for bi7).
Delete the variant please refer the thread:
How to delete the Variants?.
Delete multiple variant
Thanks,
Venkat -
Can any body tell me how to create a layout variant in the selection
hi friends i would like to know how to create a layout variant in the selection screen and how to select the variant to display the ouptut using the layout using disvariant.please if possible give me example. thanks in advance.
hi,
I shall give you the code. It will definitely work.
<u><b>Declerations you need to make</b></u>
data: WK_VARIANT LIKE DISVARIANT,
WX_VARIANT LIKE DISVARIANT,
WK_REPID LIKE SY-REPID,
WK_VARIANT_SAVE(1) TYPE C,
WK_EXIT(1) TYPE C.
<b><u>Things you need to do in the initialization event:</u></b>
INITIALIZATION.
PERFORM F_INIT_VARIANT.
PERFORM F_VARIANT_DEFAULT USING PR_VARI.
*& Form f_init_variant
FORM F_INIT_VARIANT .
CLEAR WK_VARIANT.
WK_REPID = SY-REPID.
WK_VARIANT-REPORT = WK_REPID.
WK_VARIANT-USERNAME = SY-UNAME.
WK_VARIANT_SAVE = 'A'.
ENDFORM. " f_init_variant
*& Form f_variant_default
FORM F_VARIANT_DEFAULT USING P_PR_VARI.
WX_VARIANT = WK_VARIANT.
IF NOT P_PR_VARI IS INITIAL.
WX_VARIANT-VARIANT = P_PR_VARI.
ENDIF.
CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
EXPORTING
I_SAVE = WK_VARIANT_SAVE
CHANGING
CS_VARIANT = WX_VARIANT
EXCEPTIONS
WRONG_INPUT = 1
NOT_FOUND = 2
PROGRAM_ERROR = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CASE SY-SUBRC.
WHEN 0.
P_PR_VARI = WX_VARIANT-VARIANT.
WHEN 2.
CLEAR P_PR_VARI.
ENDCASE.
ENDFORM. " f_variant_default
<b><u> After this Things you need to do in the At selection screen event:</u></b>
AT SELECTION-SCREEN ON VALUE-REQUEST FOR PR_VARI.
PERFORM F_VARIANT_F4 USING PR_VARI.
*& Form f_variant_f4
FORM F_VARIANT_F4 USING P_PR_VARI.
CALL FUNCTION 'LVC_VARIANT_F4'
EXPORTING
IS_VARIANT = WK_VARIANT
I_SAVE = WK_VARIANT_SAVE
IMPORTING
E_EXIT = WK_EXIT
ES_VARIANT = WX_VARIANT
EXCEPTIONS
NOT_FOUND = 1
PROGRAM_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF WK_EXIT IS INITIAL.
WK_VARIANT-VARIANT = WX_VARIANT-VARIANT.
P_PR_VARI = WX_VARIANT-VARIANT.
ENDIF.
ENDFORM. " f_variant_f4
After this finally when you call the output using REUSE_ALV_GRID_DISPLAY YOU NEED TO mention this parameter in the function module
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
<i><u><b>IS_LAYOUT = WA_LAYOUT</b></u></i>
<i><u><b>I_SAVE = 'X'</b></u></i>
<u><i>I_DEFAULT = 'X'</i></u>
<u><b>IS_VARIANT = WK_VARIANT</b></u>
TABLES
T_OUTTAB = ITAB1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
Once you do this,,, you can create a layout variant.
P.S. Mark all helpful answers for points.
JLN -
How to delete Process Chain Variant
Hi all~
I'd like to delete Process Chain Variant .
But I can't find delete menu from RSPC.
It could be easy, but... I can't find it~ ^^;;
Thank you in advance~ ^^;;Hello,
1. Select the necessary process type from the menu.
2. Type in the technical name of the variant and click change button.
3. When maintenance screen is opened you can delete the variant by clicking delete button.
or
chk the tables for your variants :
RSPCVARIANTATTR
RSPCVARIANT
RSPCVARIANTT
RSPCTRIGGER
Or you can go to maintain variant for any existing variant and choose your variant form the list, delete it.
Regards, -
How to fix a variant in ALV layout management
Hi experts
I have a requirement to fix one of standard layout of a ALV when user execute it, is there a way to excecute it (variant) from code lines in program?
I will appreciate any information.
Regards
mggSolved.
I create a layout variant and transport it.
Thanks. -
Hi,
how can I let user to delete dislpay variant of alv grid.
Thank you.
MarianHi,
Path:
Settings - layout - layout management
You see the table of layouts
-> Edit - delete layout or button trash
Regards Andreas
Maybe you are looking for
-
I have recently updated the iTunes in order to update both my iPhone and iPad to ISO5.0. unfortunately, after the updated, my iPhone is no longer playing any music. whenever i go to play music on my iPhone it just reverts back to the playlist or it k
-
[svn] 2312: CursorManager: New functionality and a fix for SDK-15029
Revision: 2312 Author: [email protected] Date: 2008-06-30 17:24:01 -0700 (Mon, 30 Jun 2008) Log Message: CursorManager: New functionality and a fix for SDK-15029 * NEW: When the mouse leaves a window/stage where a cursor is set, the cursor no longer s
-
After playing for awhile a Face book game or any other web sites I begin getting an error message that says a busy or unresponsive Script. It has the option of "Continuing" or "stopping" the script When I click to Continue the same error keeps poppin
-
Oracle 11gR2 RAC problem with resource state
Hi all, I installed Oracle 11gR2 grid infrastructure with 2 nodes and I installed DB 11gR2. S.O: HP-UX I actived both DB instance in each node. For an hardware problem node 1 become unstable (continuos auto reboot). I found that the problem was RAM.
-
Podcast Episodes Not Updating in Display
I have a podcast for my company. I have done two previously, last year. I just added two more and despite pinging the server repeatedly, it doesn't show in the display when you come to our podcast page. If I hit "Subscribe" All four episodes will sho