How to delete the variant in report

Hi Friends ,
i am unable to delete the Variant from the Report.
please find the error in attached screen shot.
Regards,
Muralidhar.

Hi ,
You can check weather variant is protected or not in table VARID and field 'Indicator' by passing your variant name in field 'Variant'..
https://help.sap.com/saphelp_nw70/helpdata/en/c0/98038ce58611d194cc00a0c94260a5/content.htm
please check this link it shows how to make a variant protected... ex: if you create a variant and make it protected then only you can make the value changes in that variant it won't allow other users to make changes in the values.
RSVARENT this is the program which cancels the protected variants..
Regards,
Nitin

Similar Messages

How to delete the Variants?.

Hi Friends,
I have created Variants for MD process chains to be scheduled perodically. There are about 5 Process chains and for each process chain i have created a variant in SE38 , and i have scheduled each of them in the background job periodically.
Now I have to create a Variant only for Meta chain, i have done that. But i need to delete the Variants for each of those process chains which i have created. How to delete the Variants?.
Can anyone please help me.
Thanks in Advance.
BN

You can delete variant from process chain with the below ways...
U can delete variants from table RSPCVARIANT (also see RSPCVARIANTATTR).
OR
If u wanted delete complete process chain (including process variant), U can delete PC from table RSPCCHAIN (see also RSPCVARIANTATTR)
OR
You can find Delete Feature in the Variant Itself. Open a variant - Delete
OR
when you edit the process chain, right click on the process and select maintain variant. On the next screen you have a delete button.
OR
you can use debugging to delete the variant if you are good at ABAP.
Thanks,
Saveen Kumar

Delete the variants of a query from SAP GUI

Hi all,
We have migrated queries from 3.5 to 7.0, and now we are migrating their variants also.
But while migrating variants we got a situation where some variants got copied but not activated in 7.0.
so now we want to delete those variants and migrate it again as they are not being over written.
so, my question is how can we delete variants for a query in one shot from SAP GUI.
plzz....help asap.

Hi,
note : 1003481... makes the point that...
But the variant cannot be migrated when a variant with same technical name already exists in 'new' variant storage
would it be possible that the variant that you are trying to migrate shares a tech name with one already on the system?
to check variant tables for tech names used twice....
tx: se16
a)rsrvariant, (3x variants)
c)rsrparametrizat(bi 7 made variants)
variants that appear in rsrvariant (3x) will not migrate if the same
tech name appears already in rsrparametrizat (new storage area for bi7).
Delete the variant please refer the thread:
How to delete the Variants?.
Delete multiple variant
Thanks,
Venkat

How to restrict the display of report variants

Hello All,
I want t know how to restrict the display of report variants.
I mean, when a user saves a variant for his/her purpuse on some report program, only he/she can refer the variant while other users cannot.
I know that by setting the attribute of the variant ("Protect Variant ", "Only Display in Catalog"), this would be possible, but I want to know another way, without this setting.
Thank you for your help in advance.
Regards,

Hi,
Can you just try this
DATA:it_varid TYPE TABLE OF varid.
DATA:wa_varid TYPE varid.
INITIALIZATION.
SELECT * FROM varid INTO TABLE it_varid
      WHERE report = sy-repid
      and ename = sy-uname.
IF sy-subrc = 0.
    LOOP AT it_varid INTO wa_varid .
      CALL FUNCTION 'RS_SUPPORT_SELECTIONS'
        EXPORTING
          report               = sy-repid
          variant              = wa_varid-variant
        EXCEPTIONS
          variant_not_existent = 1
          variant_obsolete     = 2
          OTHERS               = 3.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDLOOP.
ENDIF.

How to delete the WSDL folder in DS (t-code : WSADMIN)?

Hi,
Can anyone advise how to delete the WSDL files and folder in DS client 200, t-code : WSADMIN?
We mainly use this Discovery system for our users to practice and now seem there are a lot WSDL files and folders which are not used anymore, then we like to delete some unused folders.
Please kindly advise.
Thanks you very much.
Urisa

Please use tCode WSCONFIG and delete the variants that you do not want.

How to delete the messages from sxmb_moni with status cancelled

Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
Suman

I think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
       1.      In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
       2.      Select the job(s) to be scheduled.
       3.      Specify the start time and date.
       4.      Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs.

How to delete the Cost center line item data

How to delete the cost center line item data of particular cost center and only one cost center is exisiting for that company code.
Is there any way to delete the line items in that cost center.
Can data archiving & deleting can help us..........
does it have any effect over other cost center data....
any input needed.........
regards
rajesh

Hi,
i found 2 reports for you:
1) CO_TOTAL_WRI - Archiving CO Totals Records
2) RKCOITW1 - Archiving CO Line Items: Write Program
from 2) is a linlk to customize archiv-parameters
-> start it with transaction se38 / sa38
A.

How to delete the runtime error in st22

Hi all,
How to delete the runtime error in ST22. I want to clear
the list of short dump in st22
is there any T.code or any table to clear?
thanks in advance
sundar.c

Hi
you cannot delete the dumps through any tcode.
All the dumps are stored in table called SNAP, If there are more dumps the table gets filled therefore u have to reorganize the table.
Run the report RSSNAPDL in SE38.
or
You have the default SAP background jobs, SAP_REORG_ABAPDUMPS which deletes the past dumps raised in the system.
Scheduling the jobs in regular is very important
For more information
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a7ede505211d189550000e829fbbd/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/d8/a58b4275160d53e10000000a155106/frameset.htm
Regards
Bhaskar

Please guide me how to delete the OLD claimed trip details

Hi SAP Gurus
We have corrected the all the cliams by newly created an posted properly today , how ever they are struck now and since they are form old employees (2007-2008) , few are still active / terminated/ retiree staus cant delete them nor make it zero. But appear in our report as pending...
Please guide me how to delete the old trips.. your support really appreciated..
Thanks
Shan

Hi Shan,
As per my knowledge, no table should be deleted. Check the below link for more info.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/73/6bf037f1d6b302e10000009b38f889/frameset.htm
<<removed>>
Thanks,
Praisty
Edited by: Matt on Jul 26, 2011 3:11 PM

How to delete the redundant sessions in Maintenance Optimizer?

Hi experts,
As it said in title, how to delete the expired sessions as the screenshot below in Maintenance Optimizer and keep SAP Solution Manager clean?
Thank you in advance.
Best Regards,
Pany

Hello,
Check here Deleting existing maintenance optimizer transactions
Please refer to the note 845433 , with the report CRM_ORDER_DELETE and transaction type SLMO,you can delete those maintenance optimizer, hope this help to you
BR,
K.

How to get the VARIANT name in the program

Hi Guys,
Can somebody tell me how to get the VARIANT name in a program.
I have to perform some code with specific variant only. So I want to check in program which variant has been used to call the program.
Thanks,

Hi,
Variants are stored in table VARI and VARID.
You can use RS_ALL_VARIANTS_4_1_REPORT to get all the variants for a report program.
please check out the link below it will be helpful to you
Re: Programs for a transaction variant
Hope this helps.
ashish

How to delete the sales org information from BP Master Data in SAP CRM 5.0

Hi Guruu2019s
How to delete the sales org information from BP Master Data in SAP CRM 5.0
Thanks...
Mahesh Pasupunuri

Hello
There is a report attached to [SAP Note 725857|https://service.sap.com/sap/support/notes/725857] that performs the deletion.
Regards
Joaquin

How to get the variants for LAV LIST or GRID?

Hi,
How to get the variants which are stored in table like JVSO1, using function module REUSE_ALV_VARIANT_F4 ?
Thanks.

Hi,
Delcare
DATA : st_variant TYPE disvariant,       "Work area for variant
       st_variant1 TYPE disvariant.       "Work area for variant
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-041.
PARAMETERS :     p_varnt TYPE disvariant-variant MODIF ID md8. "Variant
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_varnt.
*--Local Variables
DATA: l_exit(1) TYPE c.                "ALV exit
*--Call the function module to display the list of Variants
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant    = st_variant
      i_save        = c_save
    IMPORTING
      e_exit        = l_exit
      es_variant    = st_variant1
    EXCEPTIONS
      not_found     = 1
      program_error = 2.
*--Check Subrc
IF sy-subrc <> 2 AND l_exit IS INITIAL.
    p_varnt = st_variant1-variant.
ENDIF.
start-of-selection.
IF NOT p_varnt IS INITIAL.
    CLEAR st_variant1.
    MOVE st_variant TO st_variant1.
    MOVE p_varnt TO st_variant1-variant.
*--Call the function module to check the variant exist
    CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
      EXPORTING
        i_save     = c_save
      CHANGING
        cs_variant = st_variant1.
    st_variant = st_variant1.
ENDIF.
DATA : lv_repid TYPE sy-repid.
*--Pass the Report name
lv_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program      = lv_repid
      it_fieldcat             = it_fcat
      is_variant              = st_variant
      it_events               = it_events
      i_save                  = 'A'
      i_callback_user_command = 'USER_COMMAND'
    TABLES
      t_outtab                = it_zsd_ra
    EXCEPTIONS
      program_error           = 1
      OTHERS                  = 2.
IF sy-subrc <> 0.
    MESSAGE e368(00) WITH 'Alv Display failed'(044) .
ENDIF.
regards,
Prashant

How to delete the Red Entries of EWA

Hello All,
I have some red entries of EWA which had failed during initial Setup of EWA. Now, everything is fine. How to delete those entries from Solution Monitoring-> EWA ->Operations page. It islooking messy

Hi,
You can delete the EWA sesision reports as per below
On EWA screen ...Go to Menu
GO TO >Sessions>Re-Oraganise-->Select required entries
Execute and choose which all entries you want to delete.
Regards,

How to delete the SAP HR jobs in bulk

Hi,
I have created the jobs but now I want to delete them.
Please let me know the following:
How to delete the SAP HR jobs in bulk?
Is there any programs/tcode to delete the jobs in bulk apart from LSMW?
Thanks & Regards
Manish

Hi Manish,
Please use report RHRHDL00.
Regards,
Dilek

How to delete the variant in report

Similar Messages

Maybe you are looking for