How to delete templates or add-ins on microsoft word

Hello,
How can I unload templates and add-ins on microsoft word ?
Thank you.

Hi,
Thank you for using
Word IT Pro Discussions
forum.
From your description, I understand that
you would like to know to how to add a Word document into another Word document in Word 2007, and you can make some comments besides the embedded Word documents.
If there is any misunderstanding, please feel free to let me know.
Thank you for your inquiring.
To insert a Word document to another Word document in Word 2007, follow the steps below:
=========
1.
In the Word document, click the
Insert tab.
2.
Click the
Object in the Text group.
3.
Click
object. Then click the Create from file tab.
4.
Click the
Browse button to select the Word document. Also, check the checkboxes before:
Link to file and Display as icon.
5.
Click
OK to save the settings.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything I can do for
you, please feel free to let me know.
Best Regards,
Sally Tang

Similar Messages

How to scan using HP Officejet 4620 create Microsoft Word file how add Word from computer

Unable to find option to add, install Microsoft Word ( docx) to HP Officejet 4620 Scan. Need to scan documents to create Word docx file. Also concerned about Word file size acceptable to email.
Dell printer AIO has option to easily add applications as Microsoft Word for scan but not found with HP.
Searched but did not find solution. Such as simple question but takes hours and maybe a fee to find answer.

Hi @Frederickoe8
If I understand correctly, you are trying to scan and open the scan file using Word. When you open the scan software, choose Everyday Scan, then under File Type, you can change the file format. If you select Rich Text, the saved scan can then open in Word. As for the scan size and concern with emailing the scan, make sure you do not set the dpi too high as the higher the dpi the larger the file size.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

I have pages on my MAC, friends cannot open. How do I save a file so a Microsoft Word user can open it?

I have Pages on my MacBook Air, friends cannot open when I send as an attachment to an e-mail. How do I save a file so a Microsoft Word pc can open.

Welcome to the Apple Support Communities
Pages documents can only be read on another iPhone, iPod touch, iPad or Mac with Pages installed. To make a document compatible with Microsoft Word, you just have to export the document.
To do that, just open the document with Pages, and then, go to File menu > Export > Word, and after exporting that document to Word format, just send it

How can I fix a document having a microsoft Word logo and a "PDF" file extention?

I am a subscriber to Adobe Create PDF. When I scan in documents from my HP 8600 all in one, it shows up in my computer with a pdf file extention, but with a microsoft WORD logo. I cannot simply open it with a double click and see a PDF adobe display. Instead I get a window generated from WORD that has garbage symbols and unreadable cybertext which I cannot convert. How can the be fixed?

Thanks, it worked.
In a message dated 12/9/2013 3:53:33 A.M. Pacific Standard Time,
[email protected] writes:
Re: How can I fix a document having a microsoft Word logo and a "PDF" file
extention?
created by Gilad D (try67) (http://forums.adobe.com/people/try67) in
Adobe Reader - View the full discussion
(http://forums.adobe.com/message/5913330#5913330)

How to install 3 Excel Add-Ins in one deployment ?

I have 3 excel add-ins which work in conjunction with each other. I want the user to install all 3 at the same time, from one install package. How to do that?
I am following the steps in "Deploying an Office Solution by Using Windows Installer".
This is a single user install.
Just guessing, I have created a visual studio solution containing the 3 add-in projects as "existing projects". And the 4th project in this solution is a "setup and deployment" project type. InstallShield Limited Edition Project.
I am not clear if there should be a different destination folder for the .vsto and .dll.manifest files for each add-in.
thanks,

Hi Steve Richter,
Here is a MSDN article about how to Deploy Multiple Office Solutions in a Single ClickOnce Installer.
https://msdn.microsoft.com/en-us/library/vstudio/dd465290(v=vs.100).aspx
The article will tell you the following three points.
Creating two Office solutions to deploy, and one Office solution as the installer project.
Modifying the application manifest of the installer project to install two Office solutions.
Re-signing the application and deployment manifests.
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to delete templates

Is there a way to delete templates that I have added to the "my template" file in the starting points?
I have saved some items to the "my templates" file that I no longer want. How can I get rid of them. I cannot seem to find the file on my hard drive. Where are they kept?
Thanks, Amanda

Follow this Path Exactly...
users/yourname/library/application support/iwork/pages/templates/my templates
If using Lion... in Finder, hold down the Option key while clicking on the Go menu and your users Library will appear...

How do I convert an sdw. file to microsoft word?

I wrote a book on an older star office program about 7 yrs ago and I need to convert the sdw. file somehow so I can transfer the book into microsoft word. I do not have the star office program any longer. Please help??!!

I recently purchased a new computer with Microsoft word 2007 installed . How can I convert starOffice files to Microsoft Word Files?
Thanks, Bertz9

Documaker Add-in for microsoft word

Hey guys where can i download documaker add-in for MS-WORD 2007

https://edelivery.oracle.com/
After you enter your name, company, email, etc.
Select "Oracle Insurance Applications"; "Microsoft Windows (32-bit)"
Click Go
Select Oracle Documaker Standard or Enterprise Edition Download
Download "Oracle Documaker v12.0 P0 for Microsoft Windows (32-bit)" which is part # V24186-01
Follow the installation instructions located on OTN at http://www.oracle.com/technetwork/documentation/insurance-097481.html
Under "Oracle Documaker Documentation Libraries" select "Oracle Documaker Online Documentation Library – Manuals – Release 12.0" which is part number E17552-01 and click View Library (or download it all if you want).
Under "Oracle Documaker Standard Edition - Installation Guides" select the "Documaker Installation Guide" for installation instructions. Refer to Chapter 4 for Windows installation.
Please note that this is the 12.0 version of the Add-In and Documents created with it should be imported into the library using the 12.0 version of Studio.
There are tutorials available on OTN as well under "Oracle Documaker Docmentation Libraries" under "Oracle Documaker Online Documentation Library - Tutorials - Release 11.5"; which is part #E20774-01. These have not been updated with the latest 12.0 changes, but user interface is very similar in most areas and they may prove useful to a new user.
-DA

Acrobat 8 plug-ins in Microsoft Word?

The options "Print to PDF" or "Save as PDF" work well in Microsoft Word but since my text in Word contains links to the internet, those links turned-up to be inactive in the resulting PDF document.
So I need to have the PDF plug-ins "Convert to PDF" or "PDFmaker" installed in the toolbar of Word. According to the manual of Acrobat 8, those plug-ins must be installed as the same time as Acrobat is installed.
During the installation of Acrobat 8, I activated those plug-ins but they never appeared in the toolbar of Word. What should I do to have those plug-ins active in Word?
Thanks in advance.

Actually when Office2004 out they were available. Office2004 had VBA and could use most all Macros except those that used Active-X.
when 2008 came on the markey those item were rendered useless. Because 2008 did't have VBA engine, and onlt certain Excel Macros would work.
2001 has VBA anD macros but uses the same VBA engine of it PC conter part. Still doesn't use Active-X. (Apple has an absolute Ban on Active-X, the only way it will appear is if MS buys out Apple which between slim and none and slim has left town).
Now once you have Acrobat installed you have access through Print menu Adobe PDF choice.
AS some here once again are spouting Office doesn't provide the hooks to provide creating links. It’s a Fallacy spread by adobe for years. You can take a File created in Mac and bring over to PC and Create PDF through in Acrobat PC and works just fine. The problem is with adobe and Acrobat.
Also for Adobe's edification: 2011 was a direct Port from Office 2010 PC code the only thing left out was what simply doesn't apply to Macintosh. Its so close to 2010 That theyven ported over a piece of code from PC's That bans the use of the characters <>?|\/ *, Sub Scripts and Numbers at the beginning of names for Hard Drives, DVD's, Directories, Folder Names, and File Names. and not use the File, FileServer, or Server in File Server Directories, and Directory Path names.
So go back to drawing board and come up with another excuse for Links not working. You need to get together with MS and get this problem straightened out. 15 years is long enough to avoid fixing a problem.

How to Delete Unwanted Aperture Plug-ins

I have installed a trial version of a plug-in that I don't want to use. How do I uninstall a plug-in?
Thanks

just delete them from:
\Library\Application Support\Aperture\Plug-ins\
or
~\Library\Application Support\Aperture\Plug-ins\
with aperture not running and then restart ... poof ... gone ...

How to delete templates in Word?

How do I delete my own templates in Word?

It's not the Control key, it's the Option/alt key.
The Option key solution has been posted many, many times in these forums over the last year+. The rest of the path has been posted even more times over the last seven+ years.

How to delete fonts & re-add them InDesign cc

Im trying to fumble though some issues my indesign trial I just loaded keeps saying "indesign is not working, windows is searching for a solution" then the only option is to close it.
I tried uninstalling, reinstalling it even updating to windows 8.1 (on my sony Tap 21). It didnt fix it.
I have found some instructions here but I dont understand how to actually find and delete fonts....I found some somewhere in a folder called PFM, (Cut and copied to my desktop) and now I forgot where to put them back! I think I was tired from trying all day to fix this. And no technical support available on weekend....
Hope someone might have a suggestion....(in laymen with some capacity to troubleshoot terms)
I am trying to follow these instruction Indesign CC crashes after startup - Windows 8
and these https://forums.adobe.com/message/5431757#5431757#5431757
But I dont know if it means the Windows fonts, or the adobe fonts, or where to find either....(and if this is the actual problem?)
---doing my best!
1. Quit InDesign
2. Remove all fonts from the fonts folder and add a small batch of fonts back in
3. Launch InDesign
4. If it doesn't crash, quit InDesign and add some more fonts.
If it crashes, you know one of that batch is the problem, narrow down further.
ex. Split the fonts into halves, add half of the fonts back in > if crashes > add half of the batch that causes the crash > half of that to narrow down the list
Look out for fonts with special characters in the name. Some examples of problem fonts reported by the community are:
Ithornët
Typo3-Medium.ttf
Typo3Normal.ttf
batang.ttf
Savoye LET
IndyPimp
ImpactLabel

The issue with the fonts has been fixed, as far as I know, so that 's not the problem if you are patched to version 9.2 of ID CC. You should be able to reinstall the ones you removed by right-clicking on them and choose Install.
As to what's causing the crash, I really have no idea, but it wouldn't surprise me if it's a driver issue. There is a dedicated forum monitored by adobe staff at https://forums.adobe.com/community/download_install_setup/creative_cloud_faq that may be able to offer more help. I'm going to suggest you re-post there rather than having me move this thread on the off-chance someone else here might have some thoughts as well.

Pages How to delete templates

I find that a number of sheets that I have writen end up in the Templates. How do I get those on my desktop and delete them from Templates?

Janeak,
Switch to Finder and hold down the Option key while you look in the Go menu for Library. Once in this User Library, navigate to Application Support, iWork, Pages, Templates, My Templates. Send the ones you don't want to the Trash.

Cisco Works - need to re-use a 3560, how to delete and re-add in Cisco Works

Hello. I did not see a cisco works section on the forum, forgive me if it's there and I missed it. I have removed a 3560 switch from one location and am going to rename it (same IP though) and deply it in a different department. We have cisco works sending critical and informational alerts as well as backup the configs on Sunday mornings. I think I was able to get it to stop sending alerts when I unplugged and unhooked the switch. I want to give the switch a new host name and re-deploy it. I assume it will be easier to delete and then re-add the switch to cisco works. Is the a document where I can follow steps to remove it from cisco works? I have the documentation, but it is hard to read and they don't really have an area that specifically says "remove a switch from cisco works", and I don't want to break everything for the other 55 switches that cisco works does do the alerts and backups for. I know cisco works is full of different modules, so I was wondering if there was a document or some type of help I could get for doing this. Any help would be greatly appreciated. Thanks. Mike Baker

Hi,
It sounds like a tutorial may be what you are looking for. Here is one based on LMS 3.1.
https://learningnetwork.cisco.com/docs/DOC-4031
To remove a device from DCR (Device & Credential Repository) navigate to Common Services > Device and Credentials > Device Management.
Thanks,
Nick

How to silently install office add-ins and bypass the microsoft office customization installer popup

Hello all,
I want to install an office add-in for all the computers in my company silently. But when I use the commands "%~dp0\test.exe" /S. I receive the following popup.
Is there a way to bypass this to install the add-in silently?
Thank you very much for the help.

probably, this file was downloaded via Internet Explorer, from the IE "Internet" zone?
If so, the Alternate Data Stream, on the file, will have the Zone.Identifier populated.
If you right-click the file in Windows Explorer, do you get the "Unblock" button offered?
If so, click Unblock, and then try your script again.
more on ADS:
http://blogs.technet.com/b/askcore/archive/2013/03/24/alternate-data-streams-in-ntfs.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How to delete templates or add-ins on microsoft word

Similar Messages

Maybe you are looking for