How to delete the Cost centre

hi friends,
Can any one give me some inputs on delete the cost center
i have created center wrongly  now i want to delete this i have tried
but system is not accepting to delete the cost center
the messege i am getting " deletion not possible (usage is in table T811C)
Regards,

Hi
GOTO KSU2 OR KSV2(Distribution or Asseeement cycle)
Select the cycle Remove the cost center whether it is in sender or receiver side and save the cycle.
Then run KS04 and delete the particular cost center.
Regards,
Sreekanth

Similar Messages

  • How to delete the Cost center line item data

    How to delete the cost center line item data of particular cost center and only one cost center is exisiting for that company code.
    Is there any way to delete the line items in that cost center.
    Can data archiving & deleting can help us..........
    does it have any effect over other cost center data....
    any input needed.........
    regards
    rajesh

    Hi,
    i found 2 reports for you:
    1) CO_TOTAL_WRI - Archiving CO Totals Records   
    2) RKCOITW1     - Archiving CO Line Items: Write Program        
    from 2) is a linlk to customize archiv-parameters
    -> start it with transaction se38 / sa38
    A.

  • How to Add the cost centre  in the KSBB report

    Hi Experts,
    How can we add cost centre in KSBB report. Is it possible to add? if yes could any one guide me how to add the cost centre in KSBB report?
    waiting for your replies,
    Regards

    Hi,
    I see only three possible explanations:
    a) no data on this cost centre
    b) authorizations
    c) 'hard-coded' filter in the relevant report (only if it's user-developed report)
    Regards,
    Eli

  • How to delete cost element name from group after deleting the cost element

    Hi,
    Please let me know how to delete the cost element number  from the Cost element group hierarchy.I have deleted cost element but still showing only the CE number---no valid master record.If I d not want this to be visible within hierarchy let me know what should I do.
    Thanks

    Hi
    Go to change cost element group select the cost element click on select tab (3rd Tab from Left) it will take u to new screen in that screen select remove tab (1st tab from left)
    Regards
    Sandesh

  • Trying to delete a cost centre against a position

    Hello fellow SAP users,
    We've run into a issue when trying to delete a cost centre record against a position, the scenario is as follows:
    Cost centre was created on the Parent Org Unit on the 01.01.1900 and delimited 01.06.2010.
    This created an infotype 0001 record for the employee with a blank cost centre (correct) effective 01.06.2010.
    Administrator then created the same cost centre against the position (incorrect as this is a non-payroll org unit and position within it so therefore no requirement for a cost centre to be captured) from the 01.09.2011 with high date.
    This created an infotype 0001 record for the employee with the cost centre reflecting effective 01.09.2011.
    Now when trying to correct the above we want to delete the cost centre against the position (record from the 01.09.2011) however we get the following message: "HISTORICAL RECORD ALREADY CREATED". So we are unable to delete this record in order to correct the master data on both OM and PA side, keeping in mind no payroll is run for this employee.
    How do we correct this?
    Look forward to the feedback provided.
    Kind regards
    Dorianne

    Hi,
    The message is because your position has the historical record flag (HRP1000-HISTO) set to u2018Xu2019. From SAP help:
    Allows you to mark infotype records as historical records. Historical records are permanently stored on the database, so that you can report on the information at a later point in time.
    NOTE: You cannot change records once they are marked as historical. As a result, you should not mark records as historical unless you no longer require them for processing.
    Typically, the flag is set if a user has delimited an object through PP01. Youu2019d see the historical flag in the window that pops up.
    To remove the flag, execute report RHHISTO0, enter the relevant details in the selection and execute. The next screen ill show you which record has the flag set. Select that row and click u201Cremove historical recordu201D button on top. You should then be able to remove cost center from the position.
    Hope this helps.
    Donnie

  • Problem in deleting the Cost center

    Hi
    When i am trying to delete a cost center, i get the following error :Usage in table T811C
    (T811C: Cycles in Overhead Cost Controlling or Profitability Analysis )
    Can you help me in solving the problem
    Regards
    Venkata NR Chundi

    hi,
    you are use t.code ks04.
    and delete the cost centre and check standard hieraty option.
    if any problem than discuss me .. than further process are given.
    rohit

  • How to delete a cost center hierarchy

    Hi all,
            We are having a issue regarding the cost centers. The cost centers have been assigned wrong cost center numbers. Now the client wants a set of new cost center numbers to be used in the system. In order for that to be done I thought may be if I can change the cost center hierarchy that has been assigned to the controlling area in OKKP transaction we can assign new cost centers to the new hierarchy and solve the problem.
              But the system does not allow us to assign a different cost center hierarchy from the already existing one when cost centers are assigned to it.
    My issue is how to delete the cost center hierarchy.
    If that is not possible how can we remove the cost centers assigned to the cost center hierarchy ( is this possible)
    Last question can we delete the transaction data posted to cost centers.
    Points will be assigned to all the replies.
    Thanks,
    Sarada

    Hello Sarada,
    If the requirement is to track new cost centers only going forward, then you may need to create new Cost Centers, block old cost centers. Create a new node in the hierarchy saying "Old-do not use".
    If the requirement is to have the history transactions reflect the new cost centers as well, then you will need to undertake a project for SLO (System Landscape Optimization) which will replace this data at table level. This is a major project in itself and the programs are proprietary to SAP.
    Hope this helps.

  • Link the cost centre with the activity

    Hi all,
    I want to link the cost centre with the activity. when i try it in KP26 and then try in cat2 it gives me as cost centre should be in conjunction with the activity.
    Please help me how to link the cost centre with the activity
    Regards & thanks,
    Srividhya

    hi,
    1st check G/L account which you are trying to clear or Post .Use t.code:FS00, enter G/L accounts and check "Open item" is maintained or not. If not select the check box "Open Item Management" in account management in Company code segment in Control data TAB and save.
    and cehck wether you have maintained the cost element in fs00 for your g/l account on header there is a button edit cost element

  • How to delete the one of cost centers in Splitting Structure(OKEW)?

    Dear All,
    I have a question about Splitting Structure as below? Could I get favor from you? Thanks a lot.
    How to delete the one of cost centers in Splitting Structure(OKEW)?
    Jocha

    Hi Chang
    Welcome to SDN! Its our pleasure to help you here
    Step 1: Select your Cost Center in OKEW which is assigned to the Splitting Str
    Eg: Cost Ctr 1001 is assigned to Splitting Str Z1... Tick the Check box against 1001 under Z1 Splitting Str
    Step 2: Do a Single Click on the text "Non Assigned Cost Centers"
    Step 3: Press Shift +F6 (Or Click on the Assign Button, next to the Pencil icon)
    Br, Ajay M

  • How to delete the loadings list in the itunes store (1000 tunes are downloading with no reason)

    Hi
    I switched from an iPhone 4 to an iPhone 5c and now the itunes store app wants to download 1000 tunes (I guess it cannot try more) and it blocks.
    I don't know how to delete the list (not one by one of course .
    If someone has any clue to help
    Thanks

    Hi Francis,
    Check the BADI "TRIP_WEB_CHECK" method "USER_CHECK_GENERAL_DATA".
    Here based on the schema you can modify the "estimated cost" field.
    Hope it helps.
    Regards,
    Jyothi

  • Regarding how to delete the record in internal table

    Hi experts ,
    how to delete the record in intarnal table after validating the data,
    if record contains invalid fields?
    i am giving my code see this and give me the answer?
    loop at it_data into wa_data .
    Validate  Cost Center
        READ TABLE it_kostl INTO wa_kostl WITH KEY kostl = wa_data-kostl BINARY SEARCH.
        IF sy-subrc NE 0.
          PERFORM update_error_log USING wa_data
                                         text-004.
        ENDIF.
    Validate source file material ( material number )
    loop at it_mara into wa_mara .
      read table it_ausp into wa_ausp with key atwrt = wa_data-i_matnr .
               if sy-subrc NE 0 .
       PERFORM update_error_log USING wa_data
                                           text-002.
    delete it_data-objek .
         else.
      read table it_mara into wa_mara with key  matnr = wa_ausp-objek .
           if sy-subrc EQ 0 .
           wa_data-objek = wa_mara-matnr.
           wa_data-matkl = wa_mara-matkl.
         ENDIF.
         Modify it_data from wa_data  .
      endif.
    *endloop.
    Validate unit of measure (unit)
        READ TABLE it_t006 INTO wa_t006 WITH KEY msehi = wa_data-unit .
        IF sy-subrc NE 0.
          PERFORM update_error_log USING wa_data
                                         text-003.
        endif.
    Validate delivery location ( storage location )
        READ TABLE it_lgort INTO wa_lgort WITH KEY del_loc = wa_data-del_loc.
        IF sy-subrc NE 0.
          PERFORM update_error_log USING wa_data
                                         text-001.
             if wa_data-flag ='x' .
          delete it_data from  wa_data .
        endif.
        ENDIF.
    endloop.

    Hi Naren,
    First get the index number of the IT_data table and store it in one variable whose declaration like this.
    data: tabix type sy-tabix.
    while reading the internal table it_data set the tabix variable.
    tabix = sy-tabix.
    Instead of  the above use below one.
    Delete it_data-objek
    Use the Below statement it will delete  the row from the internal table.
    Delete it_data-objek index tabix
    Thanks,
    Chidanand

  • How to block the cost center

    Dear Guru's
    Can any tell me how to block the cost center, can we detele which is having values. can we delete which is not having values
    Regards
    Chandra Sekhar Reddy.P

    Hi,
    Once you post actual values or any planning exists on this cost center you cant delete.
    To ristrict posting to cost you have two options.
    1.You can change validity period.
      change  end from 12/31/9999 to what ever date you want to stop posting(e.g. as of today 10/23/08)
    2. lock all postings to cost center on Control data tab in KS02.
    Thanks,
    Rau

  • How can define the cost center (department) manager?

    We are on 11.5.0.10
    Financials implementation is done(GL,AP,AR,FA,IA)
    In iAssets System, we want to set up the approval method to use "cost center-based approvals". (For cost center-based approvals to work properly, each cost center must have a manager defined.)
    How can define the cost center (department) manager? Thanks.

    I believe this is done in the organization definition screen. For each organization, we attach a classification "Company Cost Centre" (the same place where we attach the classification operating unit, inv org etc). In the others section, there are 2 additional information - GL company cost centre and reporting information. In the GL company cost, you need to attach the balancing segment value and the cost centre value. In the reporting information, you need to attach the manager for that organization. This ay the relationship between the cost centre and manager is created.
    Hope this clarifies.
    Vinit

  • How can we create cost centres in SAP B1

    please advise how we can create cost centres in SA P-B1 as we do in tally.

    Hi
    You can Download the e-learning File in SAP Customer portal regarding cost Accounting
    Go to [http://service.sap.com]
    Customer portal =>Education=>Release 2007 => Finance=> cost and Budgeting
    Regards
    Balaji

  • Change the Cost Centre

    Dear Sap Guru,
    My user book  the entry with Cost center but after that he knows  that book wrong Cost Centre. Now how I can change it the cost center only in this entry.
    Regards,
    Ankita

    Hi,
    You have to either reverse the original document and post ot again with right cost centre or make internal posting in CO (KB11N)  between the cost centres. In the first case, you will have the update in FI and CO; in the second only in CO.
    Regards,
    Eli

Maybe you are looking for